[ 0.0] Examining the guest ... [ 17.1] Setting a random seed [ 17.1] Installing firstboot script: /mnt/tmp/riscv64/tmp/pwgen.sw3SCI/pwgen-boot.sh [ 17.2] Copying: /mnt/tmp/riscv64/tmp/pwgen.sw3SCI/pwgen-2.07-3.fc25.src.rpm to /var/tmp [ 17.2] Copying: /mnt/tmp/riscv64/tmp/pwgen.sw3SCI/local.repo to /etc/yum.repos.d/ [ 17.3] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Control Socket. Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Starting Apply Kernel Variables... EXT4-fs (vda): re-mounted. Opts: (null) [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Remount Root and Kernel File Systems. Starting Configure read-only root support... Starting Rebuild Hardware Database... Starting Create System Users... [ OK ] Started Apply Kernel Variables. systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Create System Users. [ OK ] Started Configure read-only root support. Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... systemd-journald[84]: Received request to flush runtime journal from PID 1 [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Rebuild Dynamic Linker Cache... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for…dplug all Devices (22s / no limit) [** ] (1 of 3) A start job is running for…dplug all Devices (22s / no limit) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting udev Kernel Device Manager... Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Started dnf makecache timer. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH ed25519 Server Key Generation... Starting OpenSSH ecdsa Server Key Generation... [ OK ] Started D-Bus System Message Bus. Starting Login Service... Starting OpenSSH rsa Server Key Generation... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Network Service... [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Found device /dev/ttyS0. [ OK ] Started Network Service. [ OK ] Started OpenSSH rsa Server Key Generation. [*** ] A start job is running for Login Service (50s / 2min 3s) [ *** ] A start job is running for Login Service (51s / 2min 3s) [ *** ] A start job is running for Login Service (52s / 2min 3s) [ ***] A start job is running for Login Service (53s / 2min 3s) [ **] A start job is running for Login Service (54s / 2min 3s) [ *] A start job is running for Login Service (55s / 2min 3s) [ **] A start job is running for Login Service (55s / 2min 3s) [ ***] A start job is running for Login Service (56s / 2min 3s) [ *** ] A start job is running for Login Service (57s / 2min 3s) [ *** ] A start job is running for Login Service (57s / 2min 3s) [*** ] A start job is running for Login Service (58s / 2min 3s) [** ] A start job is running for Login Service (58s / 2min 3s) [* ] A start job is running for Login Service (59s / 2min 3s) [** ] A start job is running for Login Service (1min / 2min 3s) [*** ] A start job is running for Login Service (1min / 2min 3s) [ *** ] A start job is running for Login Service (1min 1s / 2min 3s) [ *** ] A start job is running for Login Service (1min 1s / 2min 3s) [ ***] A start job is running for Login Service (1min 2s / 2min 3s) [ **] A start job is running for Login Service (1min 3s / 2min 3s) [ *] A start job is running for Login Service (1min 3s / 2min 3s) [ **] A start job is running for Login Service (1min 4s / 2min 3s) [ ***] A start job is running for Login Service (1min 5s / 2min 3s) [ *** ] A start job is running for Login Service (1min 5s / 2min 3s) [ *** ] A start job is running for Login Service (1min 6s / 2min 3s) [*** ] A start job is running for Login Service (1min 7s / 2min 3s) [** ] A start job is running for Login Service (1min 7s / 2min 3s) [* ] A start job is running for Login Service (1min 8s / 2min 3s) [** ] A start job is running for Login Service (1min 9s / 2min 3s) [*** ] A start job is running for Login Service (1min 9s / 2min 3s) [random: crng init done *** ] A start job is running for Login Service (1min 10s / 2min 3s) [ *** ] A start job is running for Login Service (1min 10s / 2min 3s) [ ***] A start job is running for Login Service (1min 11s / 2min 3s) [ **] A start job is running for Login Service (1min 11s / 2min 3s) [ *] A start job is running for Login Service (1min 12s / 2min 3s) [ **] A start job is running for Login Service (1min 13s / 2min 3s) [ ***] A start job is running for Login Service (1min 14s / 2min 3s) [ *** ] A start job is running for Login Service (1min 14s / 2min 3s) [ *** ] A start job is running for Login Service (1min 15s / 2min 3s) [*** ] A start job is running for Login Service (1min 15s / 2min 3s) [** ] A start job is running for Login Service (1min 16s / 2min 3s) [* ] A start job is running for Login Service (1min 17s / 2min 3s) [** ] A start job is running for Login Service (1min 17s / 2min 3s) [*** ] A start job is running for Login Service (1min 18s / 2min 3s) [ *** ] A start job is running for Login Service (1min 18s / 2min 3s) [ *** ] A start job is running for Login Service (1min 19s / 2min 3s) [ ***] A start job is running for Login Service (1min 20s / 2min 3s) [ **] A start job is running for Login Service (1min 20s / 2min 3s) [ *] A start job is running for Login Service (1min 21s / 2min 3s) [ **] A start job is running for Login Service (1min 21s / 2min 3s) [ ***] A start job is running for Login Service (1min 22s / 2min 3s) [ *** ] A start job is running for Login Service (1min 22s / 2min 3s) [ *** ] A start job is running for Login Service (1min 23s / 2min 3s) [*** ] A start job is running for Login Service (1min 24s / 2min 3s) [** ] A start job is running for Login Service (1min 24s / 2min 3s) [* ] A start job is running for Login Service (1min 25s / 2min 3s) [** ] A start job is running for Login Service (1min 26s / 2min 3s) [*** ] A start job is running for Login Service (1min 26s / 2min 3s) [ *** ] A start job is running for Login Service (1min 27s / 2min 3s) [ *** ] A start job is running for Login Service (1min 27s / 2min 3s) [ ***] A start job is running for Login Service (1min 28s / 2min 3s) [ **] A start job is running for Login Service (1min 29s / 2min 3s) [ *] A start job is running for Login Service (1min 29s / 2min 3s) [ **] A start job is running for Login Service (1min 30s / 2min 3s) [ ***] A start job is running for Login Service (1min 30s / 2min 3s) [ *** ] A start job is running for Login Service (1min 31s / 2min 3s) [ *** ] A start job is running for Login Service (1min 32s / 2min 3s) [*** ] A start job is running for Login Service (1min 32s / 2min 3s) [** ] A start job is running for Login Service (1min 33s / 2min 3s) [* ] A start job is running for Login Service (1min 33s / 2min 3s) [** ] A start job is running for Login Service (1min 34s / 2min 3s) [*** ] A start job is running for Login Service (1min 35s / 2min 3s) [ *** ] A start job is running for Login Service (1min 35s / 2min 3s)  Starting Wait for Network to be Configured... [ OK ] Reached target Network. Starting libguestfs firstboot service... Starting Permit User Sessions... [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [ OK ] Started Wait for Network to be Configured. [ OK ] Started Permit User Sessions. firstboot.sh[152]: /usr/lib/virt-sysprep/firstboot.sh start firstboot.sh[152]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. firstboot.sh[152]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-pwgen-sw3SCI-pwgen-boot-sh === firstboot.sh[152]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[152]: + set -e firstboot.sh[152]: + exec Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.15.0-rc9-00064-gf923ce3a29af on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: [ OK ] Stopped target Network is Online. [ OK ] Removed slice system-sshd\x2dkeygen.slice. [ OK ] Stopped Wait for Network to be Configured. Stopping D-Bus System Message Bus... [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... Stopping Serial Getty on ttyS0... [ OK ] Stopped target Timers. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped Login Service. [ OK ] Stopped target sshd-keygen.target. [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped libguestfs firstboot service. [ OK ] Stopped target Network. Stopping Network Service... [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped dnf makecache timer. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. Stopping Load/Save Random Seed... Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Update is Completed. [ OK ] Stopped Rebuild Hardware Database. [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Rebuild Dynamic Linker Cache. [ OK ] Stopped Network Service. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting Temporary Directory (/tmp)... [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Configure read-only root support. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Power-Off... systemd-shutdow: 20 output lines suppressed due to ratelimiting systemd-shutdown[1]: Syncing filesystems and block devices. systemd-shutdown[1]: Sending SIGTERM to remaining processes... systemd-journald[84]: Received SIGTERM from PID 1 (systemd-shutdow). systemd-shutdown[1]: Sending SIGKILL to remaining processes... systemd-shutdown[1]: Unmounting file systems. EXT4-fs (vda): re-mounted. Opts: data=ordered systemd-shutdown[1]: All filesystems unmounted. systemd-shutdown[1]: Deactivating swaps. systemd-shutdown[1]: All swaps deactivated. systemd-shutdown[1]: Detaching loop devices. systemd-shutdown[1]: All loop devices detached. systemd-shutdown[1]: Detaching DM devices. reboot: Power down Power off cp: cannot stat '/mnt/tmp/riscv64/tmp/pwgen.sw3SCI/RPMS/noarch/*.noarch.rpm': No such file or directory /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64/RPMS /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild Worker 6: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pyflakes-1.3.0-2.fc25.noarch.rpm: RPM Error opening Package Worker 1: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-doc-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 5: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-javadoc-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 2: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pungi-4.1.9-1.fc25.noarch.rpm: RPM Error opening Package Worker 0: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/pungi-4.1.11-4.fc25.noarch.rpm: RPM Error opening Package Worker 12: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python2-py4j-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 14: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-py4j-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 3: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/py4j-java-0.10.4-1.fc25.noarch.rpm: RPM Error opening Package Worker 6: Error: Could not open local rpm file: /mnt/tmp/riscv64/RPMS/./noarch/python3-pyflakes-1.3.0-2.fc25.noarch.rpm: RPM Error opening Package Failed to process 9 package(s). Spawning worker 0 with 1053 pkgs Spawning worker 1 with 1053 pkgs Spawning worker 2 with 1053 pkgs Spawning worker 3 with 1053 pkgs Spawning worker 4 with 1053 pkgs Spawning worker 5 with 1053 pkgs Spawning worker 6 with 1052 pkgs Spawning worker 7 with 1052 pkgs Spawning worker 8 with 1052 pkgs Spawning worker 9 with 1052 pkgs Spawning worker 10 with 1052 pkgs Spawning worker 11 with 1052 pkgs Spawning worker 12 with 1052 pkgs Spawning worker 13 with 1052 pkgs Spawning worker 14 with 1052 pkgs Spawning worker 15 with 1052 pkgs Workers Finished /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list RPMS/ RPMS/repodata/ sent 865,755 bytes received 39 bytes 577,196.00 bytes/sec total size is 11,284,598,184 speedup is 13,033.81 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list SRPMS/ SRPMS/pwsafe-0.2.0-21.fc28.src.rpm SRPMS/pylint-1.6.4-1.fc25.src.rpm SRPMS/pymodbus-1.2.0-4.fc25.src.rpm SRPMS/pymunk-1.0.0-11.fc25.src.rpm SRPMS/pynag-0.9.1-4.fc25.src.rpm SRPMS/pynetsnmp-0.28.14-14.fc25.src.rpm SRPMS/pyobd-0.9.3-4.fc25.src.rpm sent 3,904,015 bytes received 158 bytes 520,556.40 bytes/sec total size is 13,520,963,955 speedup is 3,463.21 sending incremental file list noarch/ noarch/pylint-1.6.4-1.fc25.noarch.rpm noarch/pylint-gui-1.6.4-1.fc25.noarch.rpm noarch/pymodbus-1.2.0-4.fc25.noarch.rpm noarch/pymunk-1.0.0-11.fc25.noarch.rpm noarch/pynag-0.9.1-4.fc25.noarch.rpm noarch/pynag-examples-0.9.1-4.fc25.noarch.rpm noarch/pynetsnmp-0.28.14-14.fc25.noarch.rpm noarch/pynetsnmp-twisted-0.28.14-14.fc25.noarch.rpm noarch/pyobd-0.9.3-4.fc25.noarch.rpm noarch/python3-pylint-1.6.4-1.fc25.noarch.rpm noarch/python3-pylint-gui-1.6.4-1.fc25.noarch.rpm sent 2,289,638 bytes received 236 bytes 416,340.73 bytes/sec total size is 9,580,818,809 speedup is 4,183.99 sending incremental file list riscv64/ riscv64/pwsafe-0.2.0-21.fc28.riscv64.rpm sent 426,237 bytes received 44 bytes 121,794.57 bytes/sec total size is 1,656,844,124 speedup is 3,886.74 sending incremental file list repodata/ sent 822 bytes received 19 bytes 336.40 bytes/sec total size is 46,935,251 speedup is 55,808.86 sending incremental file list logs/ logs/plexus-pom-3.3.3-3.fc24.src.rpm/script.log logs/preferences-menus-1-10.fc24.src.rpm/script.log logs/puppet-firewalld-0.2.2-3.fc24.src.rpm/script.log logs/pwgen-2.07-3.fc25.src.rpm/script.log logs/pwsafe-0.2.0-21.fc25.src.rpm/ logs/pwsafe-0.2.0-21.fc25.src.rpm/build.log logs/pwsafe-0.2.0-21.fc25.src.rpm/root.log logs/pwsafe-0.2.0-21.fc25.src.rpm/script.log logs/pycdio-0.20-3.fc25.src.rpm/script.log logs/pycolumnize-0.3.9-1.fc25.src.rpm/script.log logs/pygobject2-2.28.6-16.fc25.src.rpm/script.log logs/pygtkchart-0-0.10.gitg8a56364.fc25.src.rpm/script.log logs/pyhoca-cli-0.5.0.3-3.fc25.src.rpm/script.log logs/pyhunspell-0.4.1-3.fc25.src.rpm/ logs/pyhunspell-0.4.1-3.fc25.src.rpm/root.log logs/pyhunspell-0.4.1-3.fc25.src.rpm/script.log logs/pyifp-0.2.2-13.fc25.src.rpm/ logs/pyifp-0.2.2-13.fc25.src.rpm/root.log logs/pyifp-0.2.2-13.fc25.src.rpm/script.log logs/pykka-1.2.1-5.fc25.src.rpm/script.log logs/pylast-1.5.1-2.fc25.src.rpm/script.log logs/pylibpcap-0.6.4-10.fc25.src.rpm/script.log logs/pylint-1.6.4-1.fc25.src.rpm/ logs/pylint-1.6.4-1.fc25.src.rpm/script.log logs/pymodbus-1.2.0-4.fc25.src.rpm/ logs/pymodbus-1.2.0-4.fc25.src.rpm/script.log logs/pymunk-1.0.0-11.fc25.src.rpm/ logs/pymunk-1.0.0-11.fc25.src.rpm/script.log logs/pynac-0.6.7-1.fc25.src.rpm/ logs/pynac-0.6.7-1.fc25.src.rpm/script.log logs/pynag-0.9.1-4.fc25.src.rpm/ logs/pynag-0.9.1-4.fc25.src.rpm/script.log logs/pynetsnmp-0.28.14-14.fc25.src.rpm/ logs/pynetsnmp-0.28.14-14.fc25.src.rpm/script.log logs/pyobd-0.9.3-4.fc25.src.rpm/ logs/pyobd-0.9.3-4.fc25.src.rpm/script.log logs/pyodbc-3.0.10-5.fc25.src.rpm/ logs/pyodbc-3.0.10-5.fc25.src.rpm/script.log logs/pyode-1.2.0-14.fc25.src.rpm/ logs/pyode-1.2.0-14.fc25.src.rpm/script.log sent 1,069,796 bytes received 49,832 bytes 203,568.73 bytes/sec total size is 774,754,679 speedup is 691.98 sending incremental file list autobuild-status.html sent 865 bytes received 382 bytes 498.80 bytes/sec total size is 40,439 speedup is 32.43 ~/d/fedora-riscv-autobuild