+ exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/perl-IO-Tty.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Gospgd + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf IO-Tty-1.12 + /usr/bin/gzip -dc /builddir/build/SOURCES/IO-Tty-1.12.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd IO-Tty-1.12 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OgnZX1 + umask 022 + cd /builddir/build/BUILD + cd IO-Tty-1.12 + perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ FOUND. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for posix_openpt(). FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... FOUND. Looking for sigaction().... FOUND. Looking for strlcpy()...... not found. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... FOUND. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... FOUND. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Tty Writing MYMETA.yml and MYMETA.json + make -j4 "/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Tty.xs > Tty.xsc Running Mkbootstrap for Tty () chmod 644 "Tty.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 cp Tty.pm blib/lib/IO/Tty.pm cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm cp Pty.pm blib/lib/IO/Pty.pm mv Tty.xsc Tty.c gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib64/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c rm -f blib/arch/auto/IO/Tty/Tty.so gcc -lpthread -shared -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lutil -lperl \ chmod 755 blib/arch/auto/IO/Tty/Tty.so Manifying 3 pod documents + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Yn2FB5 + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 + cd IO-Tty-1.12 + make pure_install DESTDIR=/builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/lib64/perl5/vendor_perl/IO/Pty.pm Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/lib64/perl5/vendor_perl/IO/Tty.pm Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/lib64/perl5/vendor_perl/IO/Tty/Constant.pm Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/man/man3/IO::Tty::Constant.3pm Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/man/man3/IO::Tty.3pm Installing /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/man/man3/IO::Pty.3pm + find /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 -type f -name .packlist -delete + find /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 -type f -name '*.bs' -empty -delete + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: perl-IO-Tty-1.12-10.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.0mMEAE + umask 022 + cd /builddir/build/BUILD + cd IO-Tty-1.12 + DOCDIR=/builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/doc/perl-IO-Tty + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/doc/perl-IO-Tty + cp -pr ChangeLog /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/doc/perl-IO-Tty + cp -pr README /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64/usr/share/doc/perl-IO-Tty + exit 0 Provides: perl(IO::Pty) = 1.12 perl(IO::Tty) = 1.12 perl(IO::Tty::Constant) perl-IO-Tty = 1.12-10.fc28 perl-IO-Tty(riscv-64) = 1.12-10.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) libutil.so.1()(64bit) libutil.so.1(GLIBC_2.27)(64bit) perl(Carp) perl(DynaLoader) perl(Exporter) perl(IO::File) perl(IO::Handle) perl(IO::Tty) perl(IO::Tty::Constant) perl(POSIX) perl(strict) perl(vars) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 Wrote: /builddir/build/SRPMS/perl-IO-Tty-1.12-10.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/perl-IO-Tty-1.12-10.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2AzKnN + umask 022 + cd /builddir/build/BUILD + cd IO-Tty-1.12 + /usr/bin/rm -rf /builddir/build/BUILDROOT/perl-IO-Tty-1.12-10.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + poweroff Terminated ++ cleanup ++ set +e ++ sync ++ sleep 5 Terminated +++ cleanup +++ set +e +++ sync +++ sleep 5 +++ sync +++ poweroff