+ exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/perl-IO-FDPass.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.cMEiJh + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf IO-FDPass-1.2 + /usr/bin/gzip -dc /builddir/build/SOURCES/IO-FDPass-1.2.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd IO-FDPass-1.2 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TW8yIJ + umask 022 + cd /builddir/build/BUILD + cd IO-FDPass-1.2 + PERL_CANARY_STABILITY_NOPROMPT=1 + perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.026001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by IO::FDPass. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by IO::FDPass, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of IO::FDPass with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::FDPass Writing MYMETA.yml and MYMETA.json + make -j4 "/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' FDPass.xs > FDPass.xsc Running Mkbootstrap for FDPass () chmod 644 "FDPass.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 cp FDPass.pm blib/lib/IO/FDPass.pm mv FDPass.xsc FDPass.c gcc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -DVERSION=\"1.2\" -DXS_VERSION=\"1.2\" -fPIC "-I/usr/lib64/perl5/CORE" FDPass.c rm -f blib/arch/auto/IO/FDPass/FDPass.so gcc -lpthread -shared -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong FDPass.o -o blib/arch/auto/IO/FDPass/FDPass.so \ -lperl \ chmod 755 blib/arch/auto/IO/FDPass/FDPass.so Manifying 1 pod document + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vbmqZh + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 + cd IO-FDPass-1.2 + make pure_install DESTDIR=/builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FDPass.bs blib/arch/auto/IO/FDPass/FDPass.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/lib64/perl5/vendor_perl/auto/IO/FDPass/FDPass.so Installing /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/lib64/perl5/vendor_perl/IO/FDPass.pm Installing /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/man/man3/IO::FDPass.3pm + find /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 -type f -name .packlist -delete + find /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 -type f -name '*.bs' -empty -delete + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: perl-IO-FDPass-1.2-5.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.qMH79L + umask 022 + cd /builddir/build/BUILD + cd IO-FDPass-1.2 + DOCDIR=/builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/doc/perl-IO-FDPass + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/doc/perl-IO-FDPass + cp -pr Changes /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/doc/perl-IO-FDPass + cp -pr README /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/doc/perl-IO-FDPass + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NTkz8C + umask 022 + cd /builddir/build/BUILD + cd IO-FDPass-1.2 + LICENSEDIR=/builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/licenses/perl-IO-FDPass + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/licenses/perl-IO-FDPass + cp -pr COPYING /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64/usr/share/licenses/perl-IO-FDPass + exit 0 Provides: perl(IO::FDPass) = 1.2 perl-IO-FDPass = 1.2-5.fc28 perl-IO-FDPass(riscv-64) = 1.2-5.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 Wrote: /builddir/build/SRPMS/perl-IO-FDPass-1.2-5.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/perl-IO-FDPass-1.2-5.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gWUsCP + umask 022 + cd /builddir/build/BUILD + cd IO-FDPass-1.2 + /usr/bin/rm -rf /builddir/build/BUILDROOT/perl-IO-FDPass-1.2-5.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + poweroff Terminated ++ cleanup ++ set +e ++ sync Terminated +++ cleanup +++ set +e +++ sync +++ sleep 5 +++ sync +++ poweroff