+ exec
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ su -c 'rpmbuild -ba /builddir/build/SPECS/perl-Crypt-SMIME.spec            --define "debug_package %{nil}"            --undefine _annotated_build            --define "_missing_doc_files_terminate_build %{nil}"            --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d"            --define "_emacs_sitelispdir /usr/share/emacs/site-lisp"            --nocheck   ' mockbuild
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.THRY6w
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf Crypt-SMIME-0.19
+ /usr/bin/gzip -dc /builddir/build/SOURCES/Crypt-SMIME-0.19.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Crypt-SMIME-0.19
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo '\.list$'
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.I8qu68
+ umask 022
+ cd /builddir/build/BUILD
+ cd Crypt-SMIME-0.19
+ /usr/bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 '
Checking if your kit is complete...
Looks good
checking for gettimeofday... yes
checking for time... test-303-1.c: In function 'main':
test-303-1.c:3:12: warning: variable 't' set but not used [-Wunused-but-set-variable]
     time_t t;
            ^
yes
checking for libcrypto... 1.1.0g
checking for LIBCRYPTO_CFLAGS... 
checking for LIBCRYPTO_LIBS... -lcrypto 
Generating a Unix-style Makefile
Writing Makefile for Crypt::SMIME
Writing MYMETA.yml and MYMETA.json
+ make -j4
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/builddir/build/BUILD/Crypt-SMIME-0.19/typemap'  SMIME.xs > SMIME.xsc
Running Mkbootstrap for SMIME ()
chmod 644 "SMIME.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SMIME.bs blib/arch/auto/Crypt/SMIME/SMIME.bs 644
cp lib/SMIME.pm blib/lib/Crypt/SMIME.pm
cp lib/SMIME/JA.pod blib/lib/Crypt/SMIME/JA.pod
mv SMIME.xsc SMIME.c
gcc -c  -DOPENSSL_LOAD_CONF -DHAVE_GETTIMEOFDAY -DHAVE_SYS_TIME_H -DHAVE_TIME -DHAVE_TIME_H -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1    -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" -fPIC "-I/usr/lib64/perl5/CORE"   SMIME.c
rm -f blib/arch/auto/Crypt/SMIME/SMIME.so
gcc  -lpthread -shared -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong  SMIME.o  -o blib/arch/auto/Crypt/SMIME/SMIME.so  \
   -lcrypto -lperl   \
  
chmod 755 blib/arch/auto/Crypt/SMIME/SMIME.so
Manifying 2 pod documents
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.AUsfuF
+ umask 022
+ cd /builddir/build/BUILD
+ '[' /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64 '!=' / ']'
+ rm -rf /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64
++ dirname /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64
+ mkdir -p /builddir/build/BUILDROOT
+ mkdir /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64
+ cd Crypt-SMIME-0.19
+ rm -rf /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64
+ make pure_install DESTDIR=/builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SMIME.bs blib/arch/auto/Crypt/SMIME/SMIME.bs 644
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/lib64/perl5/vendor_perl/auto/Crypt/SMIME/SMIME.so
Installing /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/lib64/perl5/vendor_perl/Crypt/SMIME.pm
Installing /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/lib64/perl5/vendor_perl/Crypt/SMIME/JA.pod
Installing /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/man/man3/SMIME.3pm
Installing /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/man/man3/SMIME::JA.3pm
+ find /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64 -type f -name .packlist -exec rm -f '{}' ';'
+ find /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64 -type f -name '*.bs' -size 0 -exec rm -f '{}' ';'
+ find /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64 -depth -type d -exec rmdir '{}' ';'
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Processing files: perl-Crypt-SMIME-0.19-5.fc28.riscv64
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.zNfUZA
+ umask 022
+ cd /builddir/build/BUILD
+ cd Crypt-SMIME-0.19
+ DOCDIR=/builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/doc/perl-Crypt-SMIME
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/doc/perl-Crypt-SMIME
+ cp -pr Changes /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/doc/perl-Crypt-SMIME
+ cp -pr README /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/share/doc/perl-Crypt-SMIME
+ exit 0
Provides: perl(Crypt::SMIME) = 0.19 perl-Crypt-SMIME = 0.19-5.fc28 perl-Crypt-SMIME(riscv-64) = 0.19-5.fc28
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libcrypto.so.1.1()(64bit) libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) perl(Exporter) perl(XSLoader) perl(strict) perl(warnings) rtld(GNU_HASH)
Processing files: perl-Crypt-SMIME-tests-0.19-5.fc28.riscv64
error: File not found: /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/libexec/perl5-tests


RPM build errors:
    File not found: /builddir/build/BUILDROOT/perl-Crypt-SMIME-0.19-5.fc28.riscv64/usr/libexec/perl5-tests
++ cleanup
++ set +e
++ sync
++ sleep 5
++ sync
++ poweroff
Terminated
+++ cleanup
+++ set +e
+++ sync
Terminated
++++ cleanup
++++ set +e
++++ sync
++++ sleep 5
++++ sync
++++ poweroff