+ exec
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ su -c 'rpmbuild -ba /builddir/build/SPECS/perl-Authen-PAM.spec            --define "debug_package %{nil}"            --undefine _annotated_build            --define "_missing_doc_files_terminate_build %{nil}"            --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d"            --define "_emacs_sitelispdir /usr/share/emacs/site-lisp"            --nocheck   ' mockbuild
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dgLD41
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf Authen-PAM-0.16
+ /usr/bin/tar -xof -
+ /usr/bin/gzip -dc /builddir/build/SOURCES/Authen-PAM-0.16.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd Authen-PAM-0.16
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #0 (Authen-PAM-0.16-Fix-building-on-Perl-without-dot-in-INC.patch):'
Patch #0 (Authen-PAM-0.16-Fix-building-on-Perl-without-dot-in-INC.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0
patching file Makefile.PL
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qeer55
+ umask 022
+ cd /builddir/build/BUILD
+ cd Authen-PAM-0.16
+ perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' NO_PACKLIST=1
Checking if your kit is complete...
Looks good
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for pam header files in... security
checking for pam_getenv... yes
checking if pam_strerror takes a pam_handle_t argument... yes
checking for PAM_AUTHTOKEN_REQD... no
checking for PAM_NEW_AUTHTOK_REQD... yes
checking for PAM_AUTHTOK_EXPIRED... yes
checking for PAM_AUTHTOK_RECOVER... no
checking for PAM_AUTHTOK_RECOVERY... no
checking for PAM_BAD_ITEM... yes
checking for PAM_CONV_AGAIN... yes
checking for PAM_CRED_DELETE... no
checking for PAM_CRED_ESTABLISH... no
checking for PAM_CRED_REFRESH... no
checking for PAM_CRED_REINITIALIZE... no
checking for PAM_DELETE_CRED... yes
checking for PAM_ESTABLISH_CRED... yes
checking for PAM_REFRESH_CRED... yes
checking for PAM_REINITIALIZE_CRED... yes
checking for PAM_INCOMPLETE... yes
checking for PAM_MODULE_UNKNOWN... yes
checking for PAM_RADIO_TYPE... yes
checking for PAM_BINARY_PROMPT... yes
checking whether RTLD_GLOBAL is declared... yes
configure: creating ./config.status
config.status: creating pam.cfg
config.status: creating PAM.pm
config.status: creating PAM_config.h
Generating a Unix-style Makefile
Writing Makefile for Authen::PAM
Writing MYMETA.yml and MYMETA.json
+ make -j4
Running Mkbootstrap for PAM ()
"/usr/bin/perl" "/usr/share/perl5/vendor_perl/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap' -typemap '/builddir/build/BUILD/Authen-PAM-0.16/typemap'  PAM.xs > PAM.xsc
chmod 644 "PAM.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- PAM.bs blib/arch/auto/Authen/PAM/PAM.bs 644
cp PAM.pm blib/lib/Authen/PAM.pm
cp PAM/FAQ.pod blib/lib/Authen/PAM/FAQ.pod
mv PAM.xsc PAM.c
gcc -c  -I. -D_REENTRANT -D_GNU_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1    -DVERSION=\"0.16\" -DXS_VERSION=\"0.16\" -fPIC "-I/usr/lib64/perl5/CORE"  -DHAVE_CONFIG_H PAM.c
PAM.c: In function 'XS_Authen__PAM_pam_end':
PAM.xs:501:8: warning: unused variable 'res' [-Wunused-variable]
    int res;
        ^~~
PAM.c: In function 'XS_Authen__PAM_pam_set_item':
PAM.xs:519:8: warning: unused variable 'res' [-Wunused-variable]
    int res;
        ^~~
PAM.c: In function 'XS_Authen__PAM_pam_get_item':
PAM.xs:553:8: warning: unused variable 'res' [-Wunused-variable]
    int res;
        ^~~
At top level:
PAM.xs:91:1: warning: 'not_here' defined but not used [-Wunused-function]
 not_here(s)
 ^~~~~~~~
rm -f blib/arch/auto/Authen/PAM/PAM.so
gcc  -lpthread -shared -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -L/usr/local/lib -fstack-protector-strong  PAM.o  -o blib/arch/auto/Authen/PAM/PAM.so  \
   -lpam -lperl   \
  
chmod 755 blib/arch/auto/Authen/PAM/PAM.so
Manifying 2 pod documents
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EPdyQd
+ umask 022
+ cd /builddir/build/BUILD
+ '[' /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64 '!=' / ']'
+ rm -rf /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
++ dirname /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
+ mkdir -p /builddir/build/BUILDROOT
+ mkdir /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
+ cd Authen-PAM-0.16
+ make pure_install DESTDIR=/builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- PAM.bs blib/arch/auto/Authen/PAM/PAM.bs 644
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/lib64/perl5/vendor_perl/auto/Authen/PAM/PAM.so
Installing /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/lib64/perl5/vendor_perl/Authen/PAM.pm
Installing /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/lib64/perl5/vendor_perl/Authen/PAM/FAQ.pod
Installing /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/man/man3/Authen::PAM.3pm
Installing /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/man/man3/Authen::PAM::FAQ.3pm
+ find /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64 -type f -name '*.bs' -size 0 -delete
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Processing files: perl-Authen-PAM-0.16-31.fc28.riscv64
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.hWRsu0
+ umask 022
+ cd /builddir/build/BUILD
+ cd Authen-PAM-0.16
+ DOCDIR=/builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/doc/perl-Authen-PAM
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/doc/perl-Authen-PAM
+ cp -pr Changes /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/doc/perl-Authen-PAM
+ cp -pr README /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64/usr/share/doc/perl-Authen-PAM
+ exit 0
Provides: perl(Authen::PAM) = 0.16 perl-Authen-PAM = 0.16-31.fc28 perl-Authen-PAM(riscv-64) = 0.16-31.fc28
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libpam.so.0()(64bit) libpam.so.0(LIBPAM_1.0)(64bit) libperl.so.5.26()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) perl(Carp) perl(DynaLoader) perl(Exporter) perl(POSIX) perl(strict) perl(vars) rtld(GNU_HASH)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
Wrote: /builddir/build/SRPMS/perl-Authen-PAM-0.16-31.fc28.src.rpm
Wrote: /builddir/build/RPMS/riscv64/perl-Authen-PAM-0.16-31.fc28.riscv64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3CimxW
+ umask 022
+ cd /builddir/build/BUILD
+ cd Authen-PAM-0.16
+ /usr/bin/rm -rf /builddir/build/BUILDROOT/perl-Authen-PAM-0.16-31.fc28.riscv64
+ exit 0
+ touch /buildok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ poweroff
Terminated
++ cleanup
++ set +e
++ sync
Terminated
+++ cleanup
+++ set +e
+++ sync
+++ sleep 5
+++ sync
+++ poweroff