OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 12:57:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/passwd-0.79-13.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/passwd.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.2 MB/s | 975 kB 00:03 ETA Local RPMS 15% [=== ] 3.1 MB/s | 1.8 MB 00:03 ETA Local RPMS 24% [====- ] 3.2 MB/s | 2.8 MB 00:02 ETA Local RPMS 34% [======- ] 3.2 MB/s | 3.9 MB 00:02 ETA Local RPMS 43% [========- ] 3.2 MB/s | 5.0 MB 00:01 ETA Local RPMS 49% [=========- ] 3.1 MB/s | 5.6 MB 00:01 ETA Local RPMS 58% [===========- ] 3.2 MB/s | 6.7 MB 00:01 ETA Local RPMS 58% [===========- ] 2.9 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 3.0 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.7 MB 00:00 ETA Local RPMS 85% [================= ] 3.0 MB/s | 9.7 MB 00:00 ETA Local RPMS 93% [==================- ] 3.0 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:21 ago on Wed Feb 21 12:57:34 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: audit-libs-devel riscv64 2.8.2-4.0.riscv64.fc28 local 81 k gettext riscv64 0.19.8.1-14.fc28 local 812 k glib2-devel riscv64 2.50.0-1.fc27 local 487 k libselinux-devel riscv64 2.7-11.0.riscv64.fc28 local 196 k libuser riscv64 0.62-13.0.riscv64.fc28 local 579 k libuser-devel riscv64 0.62-13.0.riscv64.fc28 local 75 k pam-devel riscv64 1.3.0-1.fc27 local 134 k popt-devel riscv64 1.16-12.fc28 local 28 k Installing dependencies: gettext-libs riscv64 0.19.8.1-14.fc28 local 905 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libcroco riscv64 0.6.12-4.fc28 local 314 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libsepol-devel riscv64 2.7-3.fc28 local 83 k pcre-cpp riscv64 8.41-4.fc27 local 111 k pcre-devel riscv64 8.41-4.fc27 local 549 k pcre-utf16 riscv64 8.41-4.fc27 local 245 k pcre-utf32 riscv64 8.41-4.fc27 local 232 k pcre2-devel riscv64 10.31-0.3.RC1.fc28.1 local 587 k pcre2-utf16 riscv64 10.31-0.3.RC1.fc28.1 local 296 k pcre2-utf32 riscv64 10.31-0.3.RC1.fc28.1 local 290 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k Transaction Summary ================================================================================ Install 40 Packages Total download size: 19 M Installed size: 57 M Downloading Packages: (1/40): audit-libs-d 0% [ ] --- B/s | 0 B --:-- ETA (1/40): audit-libs-devel-2.8.2-4.0.riscv64.fc28 527 kB/s | 81 kB 00:00 (2-3/40): gettext-0. 1% [ ] 1.7 MB/s | 273 kB 00:10 ETA (2-4/40): glib2-deve 6% [= ] 1.8 MB/s | 1.1 MB 00:09 ETA (2/40): glib2-devel-2.50.0-1.fc27.riscv64.rpm 859 kB/s | 487 kB 00:00 (3-4/40): libuser-0. 7% [=- ] 1.8 MB/s | 1.4 MB 00:09 ETA (3/40): libuser-devel-0.62-13.0.riscv64.fc28.ri 858 kB/s | 75 kB 00:00 (4-5/40): libuser-0. 8% [=- ] 1.8 MB/s | 1.7 MB 00:09 ETA (4/40): libuser-0.62-13.0.riscv64.fc28.riscv64. 787 kB/s | 579 kB 00:00 (5-6/40): pam-devel- 10% [== ] 1.8 MB/s | 2.0 MB 00:09 ETA (5/40): pam-devel-1.3.0-1.fc27.riscv64.rpm 546 kB/s | 134 kB 00:00 (6-7/40): gettext-li 11% [== ] 1.8 MB/s | 2.1 MB 00:09 ETA (6/40): gettext-0.19.8.1-14.fc28.riscv64.rpm 683 kB/s | 812 kB 00:01 (7-8/40): libselinux 12% [==- ] 1.8 MB/s | 2.3 MB 00:09 ETA (7/40): popt-devel-1.16-12.fc28.riscv64.rpm 667 kB/s | 28 kB 00:00 (8-9/40): libselinux 13% [==- ] 1.8 MB/s | 2.4 MB 00:09 ETA (8/40): libselinux-devel-2.7-11.0.riscv64.fc28. 499 kB/s | 196 kB 00:00 (9-10/40): libsepol- 14% [==- ] 1.8 MB/s | 2.6 MB 00:09 ETA (9/40): libsepol-devel-2.7-3.fc28.riscv64.rpm 458 kB/s | 83 kB 00:00 (10-11/40): gettext- 14% [==- ] 1.7 MB/s | 2.7 MB 00:09 ETA (10/40): pcre-cpp-8.41-4.fc27.riscv64.rpm 896 kB/s | 111 kB 00:00 (11-12/40): gettext- 16% [=== ] 1.8 MB/s | 3.0 MB 00:08 ETA (11/40): pcre-utf16-8.41-4.fc27.riscv64.rpm 886 kB/s | 245 kB 00:00 (12-13/40): gettext- 20% [==== ] 1.8 MB/s | 3.8 MB 00:08 ETA (12/40): pcre-devel-8.41-4.fc27.riscv64.rpm 737 kB/s | 549 kB 00:00 (13-14/40): gettext- 22% [====- ] 1.8 MB/s | 4.2 MB 00:07 ETA (13/40): pcre-utf32-8.41-4.fc27.riscv64.rpm 651 kB/s | 232 kB 00:00 (14-15/40): gettext- 24% [====- ] 1.8 MB/s | 4.5 MB 00:07 ETA (14/40): gettext-libs-0.19.8.1-14.fc28.riscv64. 584 kB/s | 905 kB 00:01 (15-16/40): pcre2-ut 24% [====- ] 1.8 MB/s | 4.6 MB 00:07 ETA (15/40): pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv 644 kB/s | 296 kB 00:00 (16-17/40): pcre2-ut 28% [=====- ] 1.8 MB/s | 5.3 MB 00:07 ETA (16/40): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 510 kB/s | 14 kB 00:00 (17-18/40): pcre2-ut 29% [=====- ] 1.8 MB/s | 5.4 MB 00:07 ETA (17/40): pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv 690 kB/s | 290 kB 00:00 (18-19/40): pkgconf- 29% [=====- ] 1.8 MB/s | 5.4 MB 00:07 ETA (18/40): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 203 kB/s | 15 kB 00:00 (19/40): pcre2-devel 29% [=====- ] 1.8 MB/s | 5.4 MB 00:07 ETA (19/40): pkgconf-1.4.1-1.fc27.riscv64.rpm 469 kB/s | 35 kB 00:00 (20-21/40): libpkgco 29% [=====- ] 1.8 MB/s | 5.5 MB 00:07 ETA (20/40): libpkgconf-1.4.1-1.fc27.riscv64.rpm 554 kB/s | 74 kB 00:00 (21-22/40): perl-int 30% [====== ] 1.8 MB/s | 5.6 MB 00:07 ETA (21/40): pcre2-devel-10.31-0.3.RC1.fc28.1.riscv 524 kB/s | 587 kB 00:01 (22-23/40): perl-lib 31% [====== ] 1.7 MB/s | 5.9 MB 00:07 ETA (22-24/40): perl-lib 36% [======= ] 1.8 MB/s | 6.8 MB 00:06 ETA (22/40): libcroco-0.6.12-4.fc28.riscv64.rpm 891 kB/s | 314 kB 00:00 (23-24/40): perl-int 36% [======= ] 1.8 MB/s | 6.8 MB 00:06 ETA (23-25/40): perl-lib 41% [======== ] 1.9 MB/s | 7.7 MB 00:05 ETA (23-25/40): perl-lib 46% [========= ] 1.9 MB/s | 8.6 MB 00:05 ETA (23-25/40): kernel-h 51% [========== ] 2.0 MB/s | 9.6 MB 00:04 ETA (23/40): kernel-headers-4.15.0-1.fc27.noarch.rp 941 kB/s | 1.1 MB 00:01 (24-25/40): perl-lib 54% [==========- ] 2.0 MB/s | 10 MB 00:04 ETA (24/40): perl-Carp-1.42-408.fc27.0.riscv64.noar 805 kB/s | 84 kB 00:00 (25-26/40): perl-lib 55% [=========== ] 2.0 MB/s | 10 MB 00:04 ETA (25/40): perl-Exporter-5.72-408.fc27.0.riscv64. 815 kB/s | 87 kB 00:00 (26-27/40): perl-lib 57% [=========== ] 2.0 MB/s | 11 MB 00:03 ETA (26/40): perl-File-Path-2.15-1.fc27.noarch.rpm 640 kB/s | 37 kB 00:00 (27-28/40): perl-lib 57% [===========- ] 2.0 MB/s | 11 MB 00:03 ETA (27/40): perl-Text-Tabs+Wrap-2013.0523-408.fc27 822 kB/s | 80 kB 00:00 (28-29/40): perl-lib 59% [===========- ] 2.0 MB/s | 11 MB 00:03 ETA (28/40): perl-constant-1.33-408.fc27.0.riscv64. 844 kB/s | 79 kB 00:00 (29-30/40): perl-int 60% [============ ] 2.0 MB/s | 11 MB 00:03 ETA (29/40): perl-parent-0.236-408.fc27.0.riscv64.n 731 kB/s | 71 kB 00:00 (30-31/40): perl-int 61% [============ ] 2.0 MB/s | 11 MB 00:03 ETA (30/40): perl-IO-1.38-408.fc28.1.riscv64.riscv6 845 kB/s | 176 kB 00:00 (31-32/40): perl-int 64% [============- ] 2.0 MB/s | 12 MB 00:03 ETA (31/40): perl-Errno-1.28-408.fc28.1.riscv64.ris 762 kB/s | 73 kB 00:00 (32-33/40): perl-int 65% [============= ] 2.0 MB/s | 12 MB 00:03 ETA (32/40): perl-PathTools-3.67-408.fc27.0.riscv64 845 kB/s | 166 kB 00:00 (33-34/40): perl-int 68% [=============- ] 2.0 MB/s | 13 MB 00:02 ETA (33/40): perl-Scalar-List-Utils-1.48-1.fc27.ris 845 kB/s | 119 kB 00:00 (34-35/40): perl-int 70% [============== ] 2.0 MB/s | 13 MB 00:02 ETA (34/40): perl-Unicode-Normalize-1.25-408.fc27.0 835 kB/s | 164 kB 00:00 (35-36/40): perl-lib 73% [==============- ] 2.0 MB/s | 14 MB 00:02 ETA (35/40): perl-macros-5.26.1-408.fc28.1.riscv64. 733 kB/s | 69 kB 00:00 (36-37/40): perl-lib 74% [==============- ] 2.0 MB/s | 14 MB 00:02 ETA (36/40): perl-threads-2.21-1.fc27.riscv64.rpm 847 kB/s | 104 kB 00:00 (37-38/40): perl-lib 76% [=============== ] 2.0 MB/s | 14 MB 00:02 ETA (37/40): perl-threads-shared-1.58-1.fc27.riscv6 833 kB/s | 91 kB 00:00 (38-39/40): perl-lib 77% [===============- ] 2.0 MB/s | 14 MB 00:02 ETA (38/40): perl-Socket-2.027-1.fc27.riscv64.rpm 856 kB/s | 95 kB 00:00 (39-40/40): perl-lib 79% [===============- ] 2.0 MB/s | 15 MB 00:01 ETA (39/40): perl-libs-5.26.1-408.fc28.1.riscv64.ri 747 kB/s | 3.3 MB 00:04 (40/40): perl-interp 81% [================ ] 1.9 MB/s | 15 MB 00:01 ETA (40/40): perl-interp 86% [================= ] 2.0 MB/s | 16 MB 00:01 ETA (40/40): perl-interp 91% [================== ] 2.0 MB/s | 17 MB 00:00 ETA (40/40): perl-interp 96% [=================== ] 2.1 MB/s | 18 MB 00:00 ETA (40/40): perl-interpreter-5.26.1-408.fc28.1.ris 1.0 MB/s | 6.7 MB 00:06 -------------------------------------------------------------------------------- Total 1.8 MB/s | 19 MB 00:10 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Carp-1.42-408.fc27. [ ] 1/40 Installing : perl-Carp-1.42-408.fc27. [==== ] 1/40 Installing : perl-Carp-1.42-408.fc27. [======================== ] 1/40 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 1/40 Installing : perl-Exporter-5.72-408.f [ ] 2/40 Installing : perl-Exporter-5.72-408.f [===== ] 2/40 Installing : perl-Exporter-5.72-408.f [======= ] 2/40 Installing : perl-Exporter-5.72-408.f [==================== ] 2/40 Installing : perl-Exporter-5.72-408.f [======================== ] 2/40 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 2/40 Installing : perl-libs-4:5.26.1-408.f [ ] 3/40 Installing : perl-libs-4:5.26.1-408.f [= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [=== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [==== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [===== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [====== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [======= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [======== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [========= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [========== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [=========== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [============ ] 3/40 Installing : perl-libs-4:5.26.1-408.f [============= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [============== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [=============== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [================ ] 3/40 Installing : perl-libs-4:5.26.1-408.f [================= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [================== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [=================== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [==================== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [===================== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [====================== ] 3/40 Installing : perl-libs-4:5.26.1-408.f [======================= ] 3/40 Installing : perl-libs-4:5.26.1-408.f [======================== ] 3/40 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 3/40 Installing : perl-Scalar-List-Utils-3 [ ] 4/40 Installing : perl-Scalar-List-Utils-3 [= ] 4/40 Installing : perl-Scalar-List-Utils-3 [== ] 4/40 Installing : perl-Scalar-List-Utils-3 [=== ] 4/40 Installing : perl-Scalar-List-Utils-3 [===== ] 4/40 Installing : perl-Scalar-List-Utils-3 [======== ] 4/40 Installing : perl-Scalar-List-Utils-3 [========== ] 4/40 Installing : perl-Scalar-List-Utils-3 [============= ] 4/40 Installing : perl-Scalar-List-Utils-3 [================ ] 4/40 Installing : perl-Scalar-List-Utils-3 [================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/40 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/40 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/40 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/40 Installing : libcroco-0.6.12-4.fc28.r [ ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [=== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [==== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [===== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [====== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [======= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [======== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [========= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [========== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [=========== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [============ ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [============= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [============== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [=============== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [================ ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [================= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [=================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [==================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [===================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [====================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [======================= ] 5/40 Installing : libcroco-0.6.12-4.fc28.r [======================== ] 5/40 Installing : libcroco-0.6.12-4.fc28.riscv64 5/40 Running scriptlet: libcroco-0.6.12-4.fc28.riscv64 5/40 Installing : gettext-libs-0.19.8.1-14 [ ] 6/40 Installing : gettext-libs-0.19.8.1-14 [= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [=== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [==== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [===== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [====== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [======= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [======== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [========= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [========== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [=========== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [============ ] 6/40 Installing : gettext-libs-0.19.8.1-14 [============= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [============== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [=============== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [================ ] 6/40 Installing : gettext-libs-0.19.8.1-14 [================= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [================== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [=================== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [==================== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [===================== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [====================== ] 6/40 Installing : gettext-libs-0.19.8.1-14 [======================= ] 6/40 Installing : gettext-libs-0.19.8.1-14 [======================== ] 6/40 Installing : gettext-libs-0.19.8.1-14.fc28.riscv64 6/40 Installing : perl-macros-4:5.26.1-408 [ ] 7/40 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/40 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/40 Installing : perl-Text-Tabs+Wrap-2013 [ ] 8/40 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 8/40 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 8/40 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 8/40 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 8/40 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 8/40 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 8/40 Installing : perl-constant-1.33-408.f [ ] 9/40 Installing : perl-constant-1.33-408.f [======= ] 9/40 Installing : perl-constant-1.33-408.f [======================== ] 9/40 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 9/40 Installing : perl-parent-1:0.236-408. [ ] 10/40 Installing : perl-parent-1:0.236-408. [============ ] 10/40 Installing : perl-parent-1:0.236-408. [======================== ] 10/40 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 10/40 Installing : perl-Errno-1.28-408.fc28 [ ] 11/40 Installing : perl-Errno-1.28-408.fc28 [================= ] 11/40 Installing : perl-Errno-1.28-408.fc28 [======================== ] 11/40 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 11/40 Installing : perl-File-Path-2.15-1.fc [ ] 12/40 Installing : perl-File-Path-2.15-1.fc [==== ] 12/40 Installing : perl-File-Path-2.15-1.fc [======== ] 12/40 Installing : perl-File-Path-2.15-1.fc [==================== ] 12/40 Installing : perl-File-Path-2.15-1.fc [======================== ] 12/40 Installing : perl-File-Path-2.15-1.fc27.noarch 12/40 Installing : perl-PathTools-3.67-408. [ ] 13/40 Installing : perl-PathTools-3.67-408. [== ] 13/40 Installing : perl-PathTools-3.67-408. [=== ] 13/40 Installing : perl-PathTools-3.67-408. [==== ] 13/40 Installing : perl-PathTools-3.67-408. [======= ] 13/40 Installing : perl-PathTools-3.67-408. [========= ] 13/40 Installing : perl-PathTools-3.67-408. [=========== ] 13/40 Installing : perl-PathTools-3.67-408. [============== ] 13/40 Installing : perl-PathTools-3.67-408. [================== ] 13/40 Installing : perl-PathTools-3.67-408. [==================== ] 13/40 Installing : perl-PathTools-3.67-408. [===================== ] 13/40 Installing : perl-PathTools-3.67-408. [====================== ] 13/40 Installing : perl-PathTools-3.67-408. [======================= ] 13/40 Installing : perl-PathTools-3.67-408. [======================== ] 13/40 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 13/40 Installing : perl-Unicode-Normalize-1 [ ] 14/40 Installing : perl-Unicode-Normalize-1 [= ] 14/40 Installing : perl-Unicode-Normalize-1 [== ] 14/40 Installing : perl-Unicode-Normalize-1 [=== ] 14/40 Installing : perl-Unicode-Normalize-1 [==== ] 14/40 Installing : perl-Unicode-Normalize-1 [===== ] 14/40 Installing : perl-Unicode-Normalize-1 [====== ] 14/40 Installing : perl-Unicode-Normalize-1 [======= ] 14/40 Installing : perl-Unicode-Normalize-1 [======== ] 14/40 Installing : perl-Unicode-Normalize-1 [========= ] 14/40 Installing : perl-Unicode-Normalize-1 [========== ] 14/40 Installing : perl-Unicode-Normalize-1 [============ ] 14/40 Installing : perl-Unicode-Normalize-1 [============= ] 14/40 Installing : perl-Unicode-Normalize-1 [============== ] 14/40 Installing : perl-Unicode-Normalize-1 [=============== ] 14/40 Installing : perl-Unicode-Normalize-1 [================ ] 14/40 Installing : perl-Unicode-Normalize-1 [================= ] 14/40 Installing : perl-Unicode-Normalize-1 [================== ] 14/40 Installing : perl-Unicode-Normalize-1 [=================== ] 14/40 Installing : perl-Unicode-Normalize-1 [==================== ] 14/40 Installing : perl-Unicode-Normalize-1 [===================== ] 14/40 Installing : perl-Unicode-Normalize-1 [====================== ] 14/40 Installing : perl-Unicode-Normalize-1 [======================= ] 14/40 Installing : perl-Unicode-Normalize-1 [======================== ] 14/40 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 14/40 Installing : perl-threads-shared-1.58 [ ] 15/40 Installing : perl-threads-shared-1.58 [=== ] 15/40 Installing : perl-threads-shared-1.58 [======= ] 15/40 Installing : perl-threads-shared-1.58 [========== ] 15/40 Installing : perl-threads-shared-1.58 [============== ] 15/40 Installing : perl-threads-shared-1.58 [================= ] 15/40 Installing : perl-threads-shared-1.58 [==================== ] 15/40 Installing : perl-threads-shared-1.58 [======================= ] 15/40 Installing : perl-threads-shared-1.58 [======================== ] 15/40 Installing : perl-threads-shared-1.58-1.fc27.riscv64 15/40 Installing : perl-threads-1:2.21-1.fc [ ] 16/40 Installing : perl-threads-1:2.21-1.fc [=== ] 16/40 Installing : perl-threads-1:2.21-1.fc [====== ] 16/40 Installing : perl-threads-1:2.21-1.fc [========= ] 16/40 Installing : perl-threads-1:2.21-1.fc [============= ] 16/40 Installing : perl-threads-1:2.21-1.fc [================ ] 16/40 Installing : perl-threads-1:2.21-1.fc [================== ] 16/40 Installing : perl-threads-1:2.21-1.fc [===================== ] 16/40 Installing : perl-threads-1:2.21-1.fc [====================== ] 16/40 Installing : perl-threads-1:2.21-1.fc [======================= ] 16/40 Installing : perl-threads-1:2.21-1.fc [======================== ] 16/40 Installing : perl-threads-1:2.21-1.fc27.riscv64 16/40 Installing : perl-IO-1.38-408.fc28.1. [ ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [= ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [=== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [==== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [===== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [====== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [======= ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [======== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [============== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [================= ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 17/40 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 17/40 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 17/40 Installing : perl-interpreter-4:5.26. [ ] 18/40 Installing : perl-interpreter-4:5.26. [= ] 18/40 Installing : perl-interpreter-4:5.26. [== ] 18/40 Installing : perl-interpreter-4:5.26. [=== ] 18/40 Installing : perl-interpreter-4:5.26. [==== ] 18/40 Installing : perl-interpreter-4:5.26. [===== ] 18/40 Installing : perl-interpreter-4:5.26. [====== ] 18/40 Installing : perl-interpreter-4:5.26. [======= ] 18/40random: crng init done Installing : perl-interpreter-4:5.26. [======== ] 18/40 Installing : perl-interpreter-4:5.26. [========= ] 18/40 Installing : perl-interpreter-4:5.26. [========== ] 18/40 Installing : perl-interpreter-4:5.26. [=========== ] 18/40 Installing : perl-interpreter-4:5.26. [============ ] 18/40 Installing : perl-interpreter-4:5.26. [============= ] 18/40 Installing : perl-interpreter-4:5.26. [============== ] 18/40 Installing : perl-interpreter-4:5.26. [=============== ] 18/40 Installing : perl-interpreter-4:5.26. [================ ] 18/40 Installing : perl-interpreter-4:5.26. [================= ] 18/40 Installing : perl-interpreter-4:5.26. [================== ] 18/40 Installing : perl-interpreter-4:5.26. [=================== ] 18/40 Installing : perl-interpreter-4:5.26. [==================== ] 18/40 Installing : perl-interpreter-4:5.26. [===================== ] 18/40 Installing : perl-interpreter-4:5.26. [====================== ] 18/40 Installing : perl-interpreter-4:5.26. [======================= ] 18/40 Installing : perl-interpreter-4:5.26. [======================== ] 18/40 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 18/40 Installing : perl-Socket-4:2.027-1.fc [ ] 19/40 Installing : perl-Socket-4:2.027-1.fc [=== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [======= ] 19/40 Installing : perl-Socket-4:2.027-1.fc [========== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [============== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [================= ] 19/40 Installing : perl-Socket-4:2.027-1.fc [==================== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [===================== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [====================== ] 19/40 Installing : perl-Socket-4:2.027-1.fc [======================= ] 19/40 Installing : perl-Socket-4:2.027-1.fc [======================== ] 19/40 Installing : perl-Socket-4:2.027-1.fc27.riscv64 19/40 Installing : kernel-headers-4.15.0-1. [ ] 20/40 Installing : kernel-headers-4.15.0-1. [= ] 20/40 Installing : kernel-headers-4.15.0-1. [== ] 20/40 Installing : kernel-headers-4.15.0-1. [=== ] 20/40 Installing : kernel-headers-4.15.0-1. [==== ] 20/40 Installing : kernel-headers-4.15.0-1. [===== ] 20/40 Installing : kernel-headers-4.15.0-1. [====== ] 20/40 Installing : kernel-headers-4.15.0-1. [======= ] 20/40 Installing : kernel-headers-4.15.0-1. [======== ] 20/40 Installing : kernel-headers-4.15.0-1. [========= ] 20/40 Installing : kernel-headers-4.15.0-1. [========== ] 20/40 Installing : kernel-headers-4.15.0-1. [=========== ] 20/40 Installing : kernel-headers-4.15.0-1. [============ ] 20/40 Installing : kernel-headers-4.15.0-1. [============= ] 20/40 Installing : kernel-headers-4.15.0-1. [============== ] 20/40 Installing : kernel-headers-4.15.0-1. [=============== ] 20/40 Installing : kernel-headers-4.15.0-1. [================ ] 20/40 Installing : kernel-headers-4.15.0-1. [================= ] 20/40 Installing : kernel-headers-4.15.0-1. [================== ] 20/40 Installing : kernel-headers-4.15.0-1. [=================== ] 20/40 Installing : kernel-headers-4.15.0-1. [==================== ] 20/40 Installing : kernel-headers-4.15.0-1. [===================== ] 20/40 Installing : kernel-headers-4.15.0-1. [====================== ] 20/40 Installing : kernel-headers-4.15.0-1. [======================= ] 20/40 Installing : kernel-headers-4.15.0-1. [======================== ] 20/40 Installing : kernel-headers-4.15.0-1.fc27.noarch 20/40 Installing : libpkgconf-1.4.1-1.fc27. [ ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 21/40 Installing : libpkgconf-1.4.1-1.fc27.riscv64 21/40 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 21/40 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 22/40 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 22/40 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 22/40 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 22/40 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 22/40 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 22/40 Installing : pkgconf-1.4.1-1.fc27.riscv64 22/40 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 23/40 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 23/40 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 23/40 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 23/40 Installing : pkgconf-pkg-config-1.4.1 [ ] 24/40 Installing : pkgconf-pkg-config-1.4.1 [==== ] 24/40 Installing : pkgconf-pkg-config-1.4.1 [===== ] 24/40 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 24/40 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 24/40 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 24/40 Installing : libsepol-devel-2.7-3.fc2 [ ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [= ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [=== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [==== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [===== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [====== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [======= ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [======== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [========= ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [========== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [=========== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [============ ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [============= ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [============== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [=============== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [==================== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [===================== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [====================== ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [======================= ] 25/40 Installing : libsepol-devel-2.7-3.fc2 [======================== ] 25/40 Installing : libsepol-devel-2.7-3.fc28.riscv64 25/40 Installing : pcre2-utf32-10.31-0.3.RC [ ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [=== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [==== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [===== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [====== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [======= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [======== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [========= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [========== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [=========== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [============ ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [============= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [============== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [=============== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [================ ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [================= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [=================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [==================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [===================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [====================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [======================= ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC [======================== ] 26/40 Installing : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 26/40 Installing : pcre2-utf16-10.31-0.3.RC [ ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [=== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [==== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [===== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [====== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [======= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [======== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [========= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [========== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [=========== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [============ ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [============= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [============== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [=============== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [================ ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [================= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [=================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [==================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [===================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [====================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [======================= ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC [======================== ] 27/40 Installing : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 27/40 Installing : pcre2-devel-10.31-0.3.RC [ ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [=== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [==== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [===== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [====== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [======= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [======== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [========= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [========== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [=========== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [============ ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [============= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [============== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [=============== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [================ ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [================= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [=================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [==================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [===================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [====================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [======================= ] 28/40 Installing : pcre2-devel-10.31-0.3.RC [======================== ] 28/40 Installing : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 28/40 Installing : pcre-utf32-8.41-4.fc27.r [ ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [= ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [=== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [==== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [===== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [====== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [======= ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [======== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [========= ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [========== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [=========== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [============ ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [============= ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [============== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [=============== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [================ ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [=================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [==================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [===================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [====================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [======================= ] 29/40 Installing : pcre-utf32-8.41-4.fc27.r [======================== ] 29/40 Installing : pcre-utf32-8.41-4.fc27.riscv64 29/40 Running scriptlet: pcre-utf32-8.41-4.fc27.riscv64 29/40 Installing : pcre-utf16-8.41-4.fc27.r [ ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [=== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [==== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [===== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [====== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [======= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [======== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [========= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [========== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [=========== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [============ ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [============= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [============== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [=============== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [================ ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [================= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [=================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [==================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [===================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [====================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [======================= ] 30/40 Installing : pcre-utf16-8.41-4.fc27.r [======================== ] 30/40 Installing : pcre-utf16-8.41-4.fc27.riscv64 30/40 Running scriptlet: pcre-utf16-8.41-4.fc27.riscv64 30/40 Installing : pcre-cpp-8.41-4.fc27.ris [ ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [===== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [======= ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [========== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [============= ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [=============== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [================== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [==================== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [======================= ] 31/40 Installing : pcre-cpp-8.41-4.fc27.ris [======================== ] 31/40 Installing : pcre-cpp-8.41-4.fc27.riscv64 31/40 Running scriptlet: pcre-cpp-8.41-4.fc27.riscv64 31/40 Installing : pcre-devel-8.41-4.fc27.r [ ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [=== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [==== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [===== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [====== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [======= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [======== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [========= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [========== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [=========== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [============ ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [============= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [============== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [=============== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [================ ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [================= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [=================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [==================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [===================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [====================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [======================= ] 32/40 Installing : pcre-devel-8.41-4.fc27.r [======================== ] 32/40 Installing : pcre-devel-8.41-4.fc27.riscv64 32/40 Installing : glib2-devel-2.50.0-1.fc2 [ ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [=== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [==== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [===== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [====== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [======= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [======== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [========= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [========== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [=========== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [============ ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [============= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [============== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [=============== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [================ ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [================= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [=================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [==================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [===================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [====================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [======================= ] 33/40 Installing : glib2-devel-2.50.0-1.fc2 [======================== ] 33/40 Installing : glib2-devel-2.50.0-1.fc27.riscv64 33/40 Installing : libuser-0.62-13.0.riscv6 [ ] 34/40 Installing : libuser-0.62-13.0.riscv6 [= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [=== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [==== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [===== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [====== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [======= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [======== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [========= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [========== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [=========== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [============ ] 34/40 Installing : libuser-0.62-13.0.riscv6 [============= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [============== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [=============== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [================ ] 34/40 Installing : libuser-0.62-13.0.riscv6 [================= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [================== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [=================== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [==================== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [===================== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [====================== ] 34/40 Installing : libuser-0.62-13.0.riscv6 [======================= ] 34/40 Installing : libuser-0.62-13.0.riscv6 [======================== ] 34/40 Installing : libuser-0.62-13.0.riscv64.fc28.riscv64 34/40 Running scriptlet: libuser-0.62-13.0.riscv64.fc28.riscv64 34/40 Installing : libuser-devel-0.62-13.0. [ ] 35/40 Installing : libuser-devel-0.62-13.0. [= ] 35/40 Installing : libuser-devel-0.62-13.0. [== ] 35/40 Installing : libuser-devel-0.62-13.0. [==== ] 35/40 Installing : libuser-devel-0.62-13.0. [===== ] 35/40 Installing : libuser-devel-0.62-13.0. [====== ] 35/40 Installing : libuser-devel-0.62-13.0. [======= ] 35/40 Installing : libuser-devel-0.62-13.0. [========= ] 35/40 Installing : libuser-devel-0.62-13.0. [=========== ] 35/40 Installing : libuser-devel-0.62-13.0. [============ ] 35/40 Installing : libuser-devel-0.62-13.0. [============= ] 35/40 Installing : libuser-devel-0.62-13.0. [=============== ] 35/40 Installing : libuser-devel-0.62-13.0. [================ ] 35/40 Installing : libuser-devel-0.62-13.0. [================== ] 35/40 Installing : libuser-devel-0.62-13.0. [==================== ] 35/40 Installing : libuser-devel-0.62-13.0. [====================== ] 35/40 Installing : libuser-devel-0.62-13.0. [======================= ] 35/40 Installing : libuser-devel-0.62-13.0. [======================== ] 35/40 Installing : libuser-devel-0.62-13.0.riscv64.fc28.riscv64 35/40 Installing : libselinux-devel-2.7-11. [ ] 36/40 Installing : libselinux-devel-2.7-11. [=== ] 36/40 Installing : libselinux-devel-2.7-11. [======= ] 36/40 Installing : libselinux-devel-2.7-11. [========= ] 36/40 Installing : libselinux-devel-2.7-11. [========== ] 36/40 Installing : libselinux-devel-2.7-11. [=========== ] 36/40 Installing : libselinux-devel-2.7-11. [============== ] 36/40 Installing : libselinux-devel-2.7-11. [=============== ] 36/40 Installing : libselinux-devel-2.7-11. [================ ] 36/40 Installing : libselinux-devel-2.7-11. [================= ] 36/40 Installing : libselinux-devel-2.7-11. [================== ] 36/40 Installing : libselinux-devel-2.7-11. [=================== ] 36/40 Installing : libselinux-devel-2.7-11. [==================== ] 36/40 Installing : libselinux-devel-2.7-11. [===================== ] 36/40 Installing : libselinux-devel-2.7-11. [====================== ] 36/40 Installing : libselinux-devel-2.7-11. [======================= ] 36/40 Installing : libselinux-devel-2.7-11. [======================== ] 36/40 Installing : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 36/40 Installing : audit-libs-devel-2.8.2-4 [ ] 37/40 Installing : audit-libs-devel-2.8.2-4 [== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [======== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [========= ] 37/40 Installing : audit-libs-devel-2.8.2-4 [========== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [=========== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [============ ] 37/40 Installing : audit-libs-devel-2.8.2-4 [============= ] 37/40 Installing : audit-libs-devel-2.8.2-4 [============== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [=============== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [================ ] 37/40 Installing : audit-libs-devel-2.8.2-4 [================= ] 37/40 Installing : audit-libs-devel-2.8.2-4 [================== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [=================== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [==================== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [===================== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [====================== ] 37/40 Installing : audit-libs-devel-2.8.2-4 [======================= ] 37/40 Installing : audit-libs-devel-2.8.2-4 [======================== ] 37/40 Installing : audit-libs-devel-2.8.2-4.0.riscv64.fc28.riscv64 37/40 Installing : popt-devel-1.16-12.fc28. [ ] 38/40 Installing : popt-devel-1.16-12.fc28. [================ ] 38/40 Installing : popt-devel-1.16-12.fc28. [================= ] 38/40 Installing : popt-devel-1.16-12.fc28. [======================== ] 38/40 Installing : popt-devel-1.16-12.fc28.riscv64 38/40 Installing : gettext-0.19.8.1-14.fc28 [ ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [=== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [==== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [===== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [====== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [======= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [======== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [========= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [========== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [=========== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [============ ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [============= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [============== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [=============== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [================ ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [================= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [=================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [==================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [===================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [====================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [======================= ] 39/40 Installing : gettext-0.19.8.1-14.fc28 [======================== ] 39/40 Installing : gettext-0.19.8.1-14.fc28.riscv64 39/40 Running scriptlet: gettext-0.19.8.1-14.fc28.riscv64 39/40 install-info: No such file or directory for /usr/share/info/gettext.info.gz Installing : pam-devel-1.3.0-1.fc27.r [ ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [===== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [====== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [======= ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [======== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [========= ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [========== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [=========== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [============ ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [============= ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [============== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [=============== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [================ ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [================= ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [=================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [==================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [===================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [====================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [======================= ] 40/40 Installing : pam-devel-1.3.0-1.fc27.r [======================== ] 40/40 Installing : pam-devel-1.3.0-1.fc27.riscv64 40/40 Running scriptlet: pam-devel-1.3.0-1.fc27.riscv64 40/40 Verifying : audit-libs-devel-2.8.2-4.0.riscv64.fc28.riscv64 1/40 Verifying : gettext-0.19.8.1-14.fc28.riscv64 2/40 Verifying : glib2-devel-2.50.0-1.fc27.riscv64 3/40 Verifying : libuser-0.62-13.0.riscv64.fc28.riscv64 4/40 Verifying : libuser-devel-0.62-13.0.riscv64.fc28.riscv64 5/40 Verifying : pam-devel-1.3.0-1.fc27.riscv64 6/40 Verifying : gettext-libs-0.19.8.1-14.fc28.riscv64 7/40 Verifying : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 8/40 Verifying : popt-devel-1.16-12.fc28.riscv64 9/40 Verifying : libsepol-devel-2.7-3.fc28.riscv64 10/40 Verifying : pcre-devel-8.41-4.fc27.riscv64 11/40 Verifying : pcre-cpp-8.41-4.fc27.riscv64 12/40 Verifying : pcre-utf16-8.41-4.fc27.riscv64 13/40 Verifying : pcre-utf32-8.41-4.fc27.riscv64 14/40 Verifying : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 15/40 Verifying : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 16/40 Verifying : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 17/40 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 18/40 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 19/40 Verifying : pkgconf-1.4.1-1.fc27.riscv64 20/40 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 21/40 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 22/40 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 23/40 Verifying : libcroco-0.6.12-4.fc28.riscv64 24/40 Verifying : kernel-headers-4.15.0-1.fc27.noarch 25/40 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 26/40 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 27/40 Verifying : perl-File-Path-2.15-1.fc27.noarch 28/40 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 29/40 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 30/40 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 31/40 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 32/40 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 33/40 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 34/40 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 35/40 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 36/40 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 37/40 Verifying : perl-threads-1:2.21-1.fc27.riscv64 38/40 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 39/40 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 40/40 Installed: audit-libs-devel.riscv64 2.8.2-4.0.riscv64.fc28 gettext.riscv64 0.19.8.1-14.fc28 glib2-devel.riscv64 2.50.0-1.fc27 libselinux-devel.riscv64 2.7-11.0.riscv64.fc28 libuser.riscv64 0.62-13.0.riscv64.fc28 libuser-devel.riscv64 0.62-13.0.riscv64.fc28 pam-devel.riscv64 1.3.0-1.fc27 popt-devel.riscv64 1.16-12.fc28 gettext-libs.riscv64 0.19.8.1-14.fc28 kernel-headers.noarch 4.15.0-1.fc27 libcroco.riscv64 0.6.12-4.fc28 libpkgconf.riscv64 1.4.1-1.fc27 libsepol-devel.riscv64 2.7-3.fc28 pcre-cpp.riscv64 8.41-4.fc27 pcre-devel.riscv64 8.41-4.fc27 pcre-utf16.riscv64 8.41-4.fc27 pcre-utf32.riscv64 8.41-4.fc27 pcre2-devel.riscv64 10.31-0.3.RC1.fc28.1 pcre2-utf16.riscv64 10.31-0.3.RC1.fc28.1 pcre2-utf32.riscv64 10.31-0.3.RC1.fc28.1 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:04:33 ago on Wed Feb 21 12:57:34 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:04:53 ago on Wed Feb 21 12:57:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group rpm-build patch redhat-rpm-config shadow-utils grep bash bzip2 cpio info findutils gzip tar fedora-release coreutils which gawk xz sed make unzip util-linux diffutils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 27 Packages Total download size: 12 M Installed size: 50 M Downloading Packages: (1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/27): make-4.2.1 5% [= ] 2.4 MB/s | 735 kB 00:04 ETA (1/27): make-4.2.1-6.fc27.riscv64.rpm 885 kB/s | 486 kB 00:00 (2-3/27): tar-1.29-7 11% [== ] 2.4 MB/s | 1.4 MB 00:04 ETA (2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 829 kB/s | 75 kB 00:00 (3-4/27): tar-1.29-7 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (3/27): diffutils-3.6-3.fc28.riscv64.rpm 724 kB/s | 577 kB 00:00 (4-5/27): tar-1.29-7 13% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 43 kB/s | 7.6 kB 00:00 (5-6/27): tar-1.29-7 13% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 147 kB/s | 7.8 kB 00:00 (6/27): tar-1.29-7.f 13% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 151 kB/s | 6.6 kB 00:00 (7-8/27): tar-1.29-7 14% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (7/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 215 kB/s | 9.0 kB 00:00 (8/27): tar-1.29-7.f 14% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (8/27): rust-srpm-macros-5-1.fc28.noarch.rpm 160 kB/s | 8.0 kB 00:00 (9-10/27): tar-1.29- 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA (9/27): tar-1.29-7.fc27.riscv64.rpm 583 kB/s | 805 kB 00:01 (10-11/27): zstd-1.3 18% [===- ] 2.2 MB/s | 2.3 MB 00:04 ETA (10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 580 kB/s | 235 kB 00:00 (11-12/27): which-2. 19% [===- ] 2.2 MB/s | 2.4 MB 00:04 ETA (11/27): which-2.21-4.fc28.riscv64.rpm 489 kB/s | 65 kB 00:00 (12-13/27): patch-2. 19% [===- ] 2.2 MB/s | 2.5 MB 00:04 ETA (12/27): patch-2.7.5-6.fc27.riscv64.rpm 725 kB/s | 270 kB 00:00 (13-14/27): unzip-6. 26% [===== ] 2.2 MB/s | 3.3 MB 00:04 ETA (13/27): unzip-6.0-36.fc28.riscv64.rpm 766 kB/s | 398 kB 00:00 (14-15/27): xz-5.2.3 29% [=====- ] 2.2 MB/s | 3.7 MB 00:04 ETA (14/27): xz-5.2.3-5.fc28.riscv64.rpm 658 kB/s | 212 kB 00:00 (15-16/27): zstd-1.3 31% [====== ] 2.2 MB/s | 3.9 MB 00:03 ETA (15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 433 kB/s | 81 kB 00:00 (16-17/27): zstd-1.3 31% [====== ] 2.1 MB/s | 3.9 MB 00:04 ETA (16/27): file-5.32-3.fc28.riscv64.rpm 748 kB/s | 81 kB 00:00 (17-18/27): zstd-1.3 33% [======- ] 2.1 MB/s | 4.2 MB 00:03 ETA (17-19/27): elfutils 40% [======== ] 2.2 MB/s | 5.0 MB 00:03 ETA (17/27): zstd-1.3.3-1.fc27.riscv64.rpm 640 kB/s | 1.1 MB 00:01 (18-19/27): elfutils 40% [======== ] 2.1 MB/s | 5.1 MB 00:03 ETA (18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 303 kB/s | 7.5 kB 00:00 (19-20/27): elfutils 41% [======== ] 2.1 MB/s | 5.1 MB 00:03 ETA (19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 323 kB/s | 8.2 kB 00:00 (20-21/27): elfutils 41% [======== ] 2.1 MB/s | 5.2 MB 00:03 ETA (20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 352 kB/s | 8.8 kB 00:00 (21-22/27): elfutils 41% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA (21/27): go-srpm-macros-2-11.fc28.noarch.rpm 325 kB/s | 8.4 kB 00:00 (22-23/27): binutils 41% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA (22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 379 kB/s | 9.7 kB 00:00 (23-24/27): binutils 42% [======== ] 2.0 MB/s | 5.3 MB 00:03 ETA (23/27): python-srpm-macros-3-26.fc28.noarch.rp 385 kB/s | 10 kB 00:00 (24-25/27): binutils 42% [========- ] 2.0 MB/s | 5.3 MB 00:03 ETA (24/27): dwz-0.12-5.fc28.riscv64.rpm 865 kB/s | 108 kB 00:00 (25-26/27): binutils 45% [========= ] 2.0 MB/s | 5.6 MB 00:03 ETA (25/27): elfutils-0.170-4.fc28.riscv64.rpm 551 kB/s | 791 kB 00:01 (26-27/27): zip-3.0- 49% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA (26/27): zip-3.0-20.fc28.riscv64.rpm 744 kB/s | 271 kB 00:00 (27/27): binutils-2. 50% [========== ] 2.0 MB/s | 6.3 MB 00:03 ETA (27/27): binutils-2. 57% [===========- ] 2.0 MB/s | 7.2 MB 00:02 ETA (27/27): binutils-2. 64% [============- ] 2.1 MB/s | 8.0 MB 00:02 ETA (27/27): binutils-2. 70% [============== ] 2.1 MB/s | 8.7 MB 00:01 ETA (27/27): binutils-2. 74% [==============- ] 2.1 MB/s | 9.3 MB 00:01 ETA (27/27): binutils-2. 77% [=============== ] 2.0 MB/s | 9.7 MB 00:01 ETA (27/27): binutils-2. 81% [================ ] 2.0 MB/s | 10 MB 00:01 ETA (27/27): binutils-2. 85% [================= ] 2.0 MB/s | 11 MB 00:00 ETA (27/27): binutils-2. 89% [=================- ] 2.0 MB/s | 11 MB 00:00 ETA (27/27): binutils-2. 94% [==================- ] 2.0 MB/s | 12 MB 00:00 ETA (27/27): binutils-2. 98% [===================-] 2.0 MB/s | 12 MB 00:00 ETA (27/27): binutils-2.30-1.fc28.riscv64.rpm 1.3 MB/s | 6.9 MB 00:05 -------------------------------------------------------------------------------- Total 1.5 MB/s | 12 MB 00:08 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 1/27 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv64 2/27 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 3/27 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 4/27 Installing : python-srpm-macros-3-26. [ ] 5/27 Installing : python-srpm-macros-3-26. [======================= ] 5/27 Installing : python-srpm-macros-3-26.fc28.noarch 5/27 Installing : perl-srpm-macros-1-26.fc [ ] 6/27 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27 Installing : perl-srpm-macros-1-26.fc28.noarch 6/27 Installing : go-srpm-macros-2-11.fc28 [ ] 7/27 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27 Installing : go-srpm-macros-2-11.fc28.noarch 7/27 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27 Installing : binutils-2.30-1.fc28.ris [ ] 11/27 Installing : binutils-2.30-1.fc28.ris [= ] 11/27 Installing : binutils-2.30-1.fc28.ris [== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======== ] 11/27 Installing : binutils-2.30-1.fc28.ris [========= ] 11/27 Installing : binutils-2.30-1.fc28.ris [========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [============ ] 11/27 Installing : binutils-2.30-1.fc28.ris [============= ] 11/27 Installing : binutils-2.30-1.fc28.ris [============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [================ ] 11/27 Installing : binutils-2.30-1.fc28.ris [================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27 Installing : binutils-2.30-1.fc28.riscv64 11/27 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27 Installing : elfutils-0.170-4.fc28.ri [ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27 Installing : elfutils-0.170-4.fc28.riscv64 12/27 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.riscv64 13/27 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 14/27 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv64 15/27 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv64 16/27 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27 Installing : rust-srpm-macros-5-1.fc28.noarch 17/27 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27 Installing : openblas-srpm-macros-2-2 [ ] 19/27 Installing : openblas-srpm-macros-2-2 [================ ] 19/27 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27 Installing : nim-srpm-macros-1-1.fc28.noarch 21/27 Installing : redhat-rpm-config-96-1.f [ ] 22/27 Installing : redhat-rpm-config-96-1.f [== ] 22/27 Installing : redhat-rpm-config-96-1.f [=== ] 22/27 Installing : redhat-rpm-config-96-1.f [========= ] 22/27 Installing : redhat-rpm-config-96-1.f [=========== ] 22/27 Installing : redhat-rpm-config-96-1.f [================= ] 22/27 Installing : redhat-rpm-config-96-1.f [================== ] 22/27 Installing : redhat-rpm-config-96-1.f [=================== ] 22/27 Installing : redhat-rpm-config-96-1.f [===================== ] 22/27 Installing : redhat-rpm-config-96-1.f [====================== ] 22/27 Installing : redhat-rpm-config-96-1.f [======================== ] 22/27 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27 Installing : diffutils-3.6-3.fc28.ris [ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27 Installing : diffutils-3.6-3.fc28.riscv64 23/27 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv64 24/27 Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27 Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27 Installing : which-2.21-4.fc28.riscv6 [ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27 Installing : which-2.21-4.fc28.riscv64 26/27 Running scriptlet: which-2.21-4.fc28.riscv64 26/27 Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27 Installing : make-1:4.2.1-6.fc27.riscv64 27/27 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27 Verifying : tar-2:1.29-7.fc27.riscv64 1/27 Verifying : diffutils-3.6-3.fc28.riscv64 2/27 Verifying : make-1:4.2.1-6.fc27.riscv64 3/27 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27 Verifying : zstd-1.3.3-1.fc27.riscv64 11/27 Verifying : which-2.21-4.fc28.riscv64 12/27 Verifying : patch-2.7.5-6.fc27.riscv64 13/27 Verifying : unzip-6.0-36.fc28.riscv64 14/27 Verifying : xz-5.2.3-5.fc28.riscv64 15/27 Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27 Verifying : elfutils-0.170-4.fc28.riscv64 17/27 Verifying : file-5.32-3.fc28.riscv64 18/27 Verifying : binutils-2.30-1.fc28.riscv64 19/27 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27 Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27 Verifying : go-srpm-macros-2-11.fc28.noarch 23/27 Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27 Verifying : python-srpm-macros-3-26.fc28.noarch 25/27 Verifying : dwz-0.12-5.fc28.riscv64 26/27 Verifying : zip-3.0-20.fc28.riscv64 27/27 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:06:50 ago on Wed Feb 21 12:57:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 3 Packages Total download size: 1.4 M Installed size: 3.0 M Downloading Packages: (1/3): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/3): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 551 kB/s | 15 kB 00:00 (2-3/3): glibc-devel 3% [- ] 669 kB/s | 46 kB 00:02 ETA (2/3): glibc-headers-2.27-4.fc28.riscv64.rpm 1.1 MB/s | 442 kB 00:00 (3/3): glibc-devel-2 61% [============ ] 795 kB/s | 904 kB 00:00 ETA (3/3): glibc-devel-2.27-4.fc28.riscv64.rpm 1.4 MB/s | 1.0 MB 00:00 -------------------------------------------------------------------------------- Total 1.8 MB/s | 1.4 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : 1/1 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 1/3 Installing : glibc-headers-2.27-4.fc28 [ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [==== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [===== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [====== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=========== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=============== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [==================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [===================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [====================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======================= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========================= ] 1/3 Installing : glibc-headers-2.27-4.fc28.riscv64 1/3 Installing : libxcrypt-devel-4.0.0-4.f [ ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 2/3 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 2/3 Installing : glibc-devel-2.27-4.fc28.r [ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [==== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [===== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [====== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.riscv64 3/3 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 3/3 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/3 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/3 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/3 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off