+ exec
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ su -c 'rpmbuild -ba /builddir/build/SPECS/pam_usb.spec            --define "debug_package %{nil}"            --undefine _annotated_build            --define "_missing_doc_files_terminate_build %{nil}"            --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d"            --define "_emacs_sitelispdir /usr/share/emacs/site-lisp"            --nocheck   ' mockbuild
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tEzSzD
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ /usr/bin/gzip -dc /builddir/build/SOURCES/b96b4f79f7a579b2445a149d3b382c16a6d04324.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #0 (pam_usb-paths.patch):'
Patch #0 (pam_usb-paths.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0
patching file .gitignore
patching file Makefile
+ echo 'Patch #1 (pam_usb-fsf-address.patch):'
Patch #1 (pam_usb-fsf-address.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0
patching file COPYING
patching file Makefile
patching file src/conf.c
patching file src/conf.h
patching file src/device.c
patching file src/device.h
patching file src/hal.c
patching file src/hal.h
patching file src/local.c
patching file src/local.h
patching file src/log.c
patching file src/log.h
patching file src/mem.c
patching file src/mem.h
patching file src/pad.c
patching file src/pad.h
patching file src/pam.c
patching file src/pamusb-check.c
patching file src/version.h
patching file src/volume.c
patching file src/volume.h
patching file src/xpath.c
patching file src/xpath.h
patching file tools/pamusb-agent
patching file tools/pamusb-conf
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eK3y00
+ umask 022
+ cd /builddir/build/BUILD
+ cd pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ make -j4
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/conf.c -o src/conf.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/mem.c -o src/mem.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/log.c -o src/log.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/xpath.c -o src/xpath.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/hal.c -o src/hal.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/pad.c -o src/pad.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/volume.c -o src/volume.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/local.c -o src/local.o
src/pad.c: In function 'pusb_pad_open_device':
src/pad.c:43:33: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
  snprintf(path, PATH_MAX, "%s/%s", mnt_point, opts->device_pad_directory);
                                 ^
src/pad.c:43:2: note: 'snprintf' output 2 or more bytes (assuming 4097) into a destination of size 4096
  snprintf(path, PATH_MAX, "%s/%s", mnt_point, opts->device_pad_directory);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/pad.c:55:33: warning: '/' directive output may be truncated writing 1 byte into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(path, PATH_MAX, "%s/%s/%s.%s.pad", mnt_point,
                                 ^
src/pad.c:55:2: note: 'snprintf' output 8 or more bytes (assuming 4166) into a destination of size 4096
  snprintf(path, PATH_MAX, "%s/%s/%s.%s.pad", mnt_point,
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    opts->device_pad_directory, user, opts->hostname);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/pad.c: In function 'pusb_pad_open_system':
src/pad.c:84:33: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
  snprintf(path, PATH_MAX, "%s/%s", user_ent->pw_dir,
                                 ^
src/pad.c:84:2: note: 'snprintf' output 2 or more bytes (assuming 4097) into a destination of size 4096
  snprintf(path, PATH_MAX, "%s/%s", user_ent->pw_dir,
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    opts->system_pad_directory);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/pad.c:106:33: warning: '/' directive output may be truncated writing 1 byte into a region of size between 0 and 4095 [-Wformat-truncation=]
  snprintf(path, PATH_MAX, "%s/%s/%s.pad", user_ent->pw_dir,
                                 ^
src/pad.c:106:2: note: 'snprintf' output 7 or more bytes (assuming 4102) into a destination of size 4096
  snprintf(path, PATH_MAX, "%s/%s/%s.pad", user_ent->pw_dir,
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    opts->system_pad_directory, device_name);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/device.c -o src/device.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/pam.c -o src/pam.o
gcc -c  -Wall -fPIC `pkg-config --cflags libxml-2.0` `pkg-config --cflags dbus-1` -ggdb src/pamusb-check.c -o src/pamusb-check.o
gcc -o pam_usb.so -shared  src/conf.o src/mem.o src/log.o src/xpath.o src/hal.o src/pad.o src/volume.o src/local.o src/device.o src/pam.o `pkg-config --libs libxml-2.0` `pkg-config --libs dbus-1`
gcc -o pamusb-check  src/conf.o src/mem.o src/log.o src/xpath.o src/hal.o src/pad.o src/volume.o src/local.o src/device.o src/pamusb-check.o `pkg-config --libs libxml-2.0` `pkg-config --libs dbus-1`
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.g9xMPX
+ umask 022
+ cd /builddir/build/BUILD
+ '[' /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64 '!=' / ']'
+ rm -rf /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64
++ dirname /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64
+ mkdir -p /builddir/build/BUILDROOT
+ mkdir /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64
+ cd pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64 'INSTALL=/usr/bin/install -p'
mkdir -p /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/etc/security /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/doc/pam_usb /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/man/man1 /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/bin /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/lib64/security
/usr/bin/install -p -m755 pam_usb.so /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/lib64/security
/usr/bin/install -p -m755 pamusb-check tools/pamusb-conf tools/pamusb-agent /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/bin
/usr/bin/install -p -b -m644 doc/pamusb.conf /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/etc/security
/usr/bin/install -p -m644 doc/CONFIGURATION.md /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/doc/pam_usb
/usr/bin/install -p -m644 doc/pamusb-conf.1.gz doc/pamusb-agent.1.gz doc/pamusb-check.1.gz /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/man/man1
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
mangling shebang in ./usr/bin/pamusb-conf from #!/usr/bin/env python2 to #!/usr/bin/python2
mangling shebang in ./usr/bin/pamusb-agent from #!/usr/bin/env python2 to #!/usr/bin/python2
Processing files: pam_usb-0.5.0-4.fc28.riscv64
Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.2ZH6Yz
+ umask 022
+ cd /builddir/build/BUILD
+ cd pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ LICENSEDIR=/builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/licenses/pam_usb
+ export LC_ALL=C
+ LC_ALL=C
+ export LICENSEDIR
+ /usr/bin/mkdir -p /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/licenses/pam_usb
+ cp -pr COPYING /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64/usr/share/licenses/pam_usb
+ exit 0
Provides: config(pam_usb) = 0.5.0-4.fc28 pam_usb = 0.5.0-4.fc28 pam_usb(riscv-64) = 0.5.0-4.fc28
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: /usr/bin/python2 libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libdbus-1.so.3()(64bit) libdbus-1.so.3(LIBDBUS_1_3)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) rtld(GNU_HASH)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64
Wrote: /builddir/build/SRPMS/pam_usb-0.5.0-4.fc28.src.rpm
Wrote: /builddir/build/RPMS/riscv64/pam_usb-0.5.0-4.fc28.riscv64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BWlU7r
+ umask 022
+ cd /builddir/build/BUILD
+ cd pam_usb-b96b4f79f7a579b2445a149d3b382c16a6d04324
+ /usr/bin/rm -rf /builddir/build/BUILDROOT/pam_usb-0.5.0-4.fc28.riscv64
+ exit 0
+ touch /buildok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ poweroff
Terminated
++ cleanup
++ set +e
++ sync
Terminated
+++ cleanup
+++ set +e
+++ sync
+++ sleep 5
+++ sync
+++ poweroff