OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 15:23:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/nettle-3.3-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/nettle.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.9 MB/s | 904 kB 00:04 ETA Local RPMS 9% [=- ] 2.8 MB/s | 1.4 MB 00:04 ETA Local RPMS 16% [=== ] 2.9 MB/s | 2.3 MB 00:04 ETA Local RPMS 23% [====- ] 2.9 MB/s | 3.3 MB 00:03 ETA Local RPMS 31% [====== ] 2.9 MB/s | 4.3 MB 00:03 ETA Local RPMS 38% [=======- ] 2.9 MB/s | 5.4 MB 00:02 ETA Local RPMS 45% [========= ] 3.0 MB/s | 6.4 MB 00:02 ETA Local RPMS 52% [==========- ] 3.0 MB/s | 7.4 MB 00:02 ETA Local RPMS 55% [=========== ] 2.7 MB/s | 7.7 MB 00:02 ETA Local RPMS 62% [============ ] 2.8 MB/s | 8.6 MB 00:01 ETA Local RPMS 68% [=============- ] 2.8 MB/s | 9.6 MB 00:01 ETA Local RPMS 75% [=============== ] 2.8 MB/s | 11 MB 00:01 ETA Local RPMS 82% [================- ] 2.8 MB/s | 12 MB 00:00 ETA Local RPMS 89% [=================- ] 2.9 MB/s | 13 MB 00:00 ETA Local RPMS 97% [=================== ] 2.9 MB/s | 13 MB 00:00 ETA Local RPMS 2.3 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:38 ago on Thu Feb 22 15:23:36 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k gettext-devel riscv64 0.19.8.1-14.fc28 local 363 k gmp-devel riscv64 1:6.1.2-7.fc27 local 185 k libtool riscv64 2.4.6-21.fc27 local 707 k m4 riscv64 1.4.18-5.fc28 local 369 k Installing dependencies: emacs-filesystem noarch 1:25.3-5.fc28 local 67 k gettext riscv64 0.19.8.1-14.fc28 local 812 k gettext-common-devel noarch 0.19.8.1-14.fc28 local 418 k gettext-libs riscv64 0.19.8.1-14.fc28 local 905 k gmp-c++ riscv64 1:6.1.2-7.fc27 local 128 k libcroco riscv64 0.6.12-4.fc28 local 314 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k tar riscv64 2:1.29-7.fc27 local 805 k xz riscv64 5.2.3-5.fc28 local 212 k Transaction Summary ================================================================================ Install 48 Packages Total download size: 21 M Installed size: 66 M Downloading Packages: (1/48): gettext-deve 0% [ ] --- B/s | 0 B --:-- ETA (1/48): gmp-devel-6.1.2-7.fc27.riscv64.rpm 806 kB/s | 185 kB 00:00 (2-3/48): gettext-de 2% [- ] 2.2 MB/s | 564 kB 00:09 ETA (2/48): gettext-devel-0.19.8.1-14.fc28.riscv64. 717 kB/s | 363 kB 00:00 (3-4/48): gettext-0. 5% [= ] 2.2 MB/s | 1.1 MB 00:09 ETA (3/48): gettext-common-devel-0.19.8.1-14.fc28.n 775 kB/s | 418 kB 00:00 (4-5/48): gettext-0. 8% [=- ] 2.2 MB/s | 1.8 MB 00:08 ETA (4/48): gmp-c++-6.1.2-7.fc27.riscv64.rpm 926 kB/s | 128 kB 00:00 (5-6/48): gettext-0. 10% [== ] 2.2 MB/s | 2.2 MB 00:08 ETA (5/48): gettext-0.19.8.1-14.fc28.riscv64.rpm 614 kB/s | 812 kB 00:01 (6-7/48): autoconf-2 11% [== ] 2.0 MB/s | 2.3 MB 00:09 ETA (6/48): emacs-filesystem-25.3-5.fc28.noarch.rpm 735 kB/s | 67 kB 00:00 (7-8/48): autoconf-2 12% [== ] 2.0 MB/s | 2.6 MB 00:09 ETA (7-9/48): autoconf-2 16% [=== ] 2.1 MB/s | 3.4 MB 00:08 ETA (7/48): gettext-libs-0.19.8.1-14.fc28.riscv64.r 613 kB/s | 905 kB 00:01 (8-9/48): automake-1 17% [===- ] 2.1 MB/s | 3.7 MB 00:08 ETA (8/48): autoconf-2.69-26.fc28.noarch.rpm 657 kB/s | 709 kB 00:01 (9-10/48): automake- 19% [===- ] 2.0 MB/s | 4.2 MB 00:08 ETA (9/48): automake-1.15.1-3.fc28.noarch.rpm 686 kB/s | 706 kB 00:01 (10-11/48): libtool- 21% [==== ] 2.0 MB/s | 4.6 MB 00:08 ETA (10-12/48): m4-1.4.1 25% [===== ] 2.1 MB/s | 5.5 MB 00:07 ETA (10/48): m4-1.4.18-5.fc28.riscv64.rpm 868 kB/s | 369 kB 00:00 (11-12/48): libtool- 27% [===== ] 2.1 MB/s | 5.8 MB 00:07 ETA (11/48): libtool-2.4.6-21.fc27.riscv64.rpm 648 kB/s | 707 kB 00:01 (12-13/48): tar-1.29 27% [===== ] 2.0 MB/s | 5.8 MB 00:07 ETA (12/48): xz-5.2.3-5.fc28.riscv64.rpm 576 kB/s | 212 kB 00:00 (13-14/48): libcroco 30% [====== ] 2.0 MB/s | 6.4 MB 00:07 ETA (13/48): tar-1.29-7.fc27.riscv64.rpm 637 kB/s | 805 kB 00:01 (14-15/48): perl-Car 30% [====== ] 2.0 MB/s | 6.6 MB 00:07 ETA (14/48): perl-Carp-1.42-408.fc27.0.riscv64.noar 338 kB/s | 84 kB 00:00 (15-16/48): perl-Exp 31% [====== ] 2.0 MB/s | 6.6 MB 00:07 ETA (15/48): libcroco-0.6.12-4.fc28.riscv64.rpm 534 kB/s | 314 kB 00:00 (16-17/48): perl-Fil 31% [====== ] 1.9 MB/s | 6.7 MB 00:07 ETA (16/48): perl-File-Path-2.15-1.fc27.noarch.rpm 300 kB/s | 37 kB 00:00 (17-18/48): perl-Get 31% [====== ] 1.9 MB/s | 6.8 MB 00:07 ETA (17/48): perl-Exporter-5.72-408.fc27.0.riscv64. 337 kB/s | 87 kB 00:00 (18-19/48): perl-Thr 32% [====== ] 1.9 MB/s | 6.8 MB 00:07 ETA (18/48): perl-Getopt-Long-2.50-3.fc27.noarch.rp 395 kB/s | 61 kB 00:00 (19-20/48): perl-con 32% [====== ] 1.9 MB/s | 6.9 MB 00:07 ETA (19/48): perl-Thread-Queue-3.12-408.fc27.0.risc 449 kB/s | 77 kB 00:00 (20-21/48): perl-Err 32% [======- ] 1.9 MB/s | 7.0 MB 00:07 ETA (20/48): perl-constant-1.33-408.fc27.0.riscv64. 437 kB/s | 79 kB 00:00 (21-22/48): perl-lib 33% [======- ] 1.9 MB/s | 7.0 MB 00:07 ETA (21/48): perl-Errno-1.28-408.fc28.1.riscv64.ris 380 kB/s | 73 kB 00:00 (22-23/48): perl-int 33% [======- ] 1.9 MB/s | 7.1 MB 00:07 ETA (22/48): perl-IO-1.38-408.fc28.1.riscv64.riscv6 825 kB/s | 176 kB 00:00 (23-24/48): perl-lib 35% [======= ] 1.9 MB/s | 7.6 MB 00:07 ETA (23/48): perl-PathTools-3.67-408.fc27.0.riscv64 845 kB/s | 166 kB 00:00 (24-25/48): perl-lib 38% [=======- ] 1.9 MB/s | 8.1 MB 00:06 ETA (24/48): perl-threads-2.21-1.fc27.riscv64.rpm 845 kB/s | 104 kB 00:00 (25-26/48): perl-lib 39% [=======- ] 1.9 MB/s | 8.4 MB 00:06 ETA (25/48): perl-Text-ParseWords-3.30-408.fc27.0.r 806 kB/s | 73 kB 00:00 (26-27/48): perl-lib 40% [======== ] 1.9 MB/s | 8.7 MB 00:06 ETA (26/48): perl-Data-Dumper-2.167-408.fc27.0.risc 855 kB/s | 149 kB 00:00 (27-28/48): perl-lib 43% [========- ] 1.9 MB/s | 9.1 MB 00:06 ETA (27/48): perl-Text-Tabs+Wrap-2013.0523-408.fc27 821 kB/s | 80 kB 00:00 (28-29/48): perl-lib 44% [========- ] 1.9 MB/s | 9.4 MB 00:06 ETA (28/48): perl-parent-0.236-408.fc27.0.riscv64.n 733 kB/s | 71 kB 00:00 (29-30/48): perl-int 45% [========= ] 1.9 MB/s | 9.6 MB 00:06 ETA (29/48): perl-Scalar-List-Utils-1.48-1.fc27.ris 840 kB/s | 119 kB 00:00 (30-31/48): perl-int 46% [========= ] 1.9 MB/s | 10 MB 00:05 ETA (30/48): perl-Unicode-Normalize-1.25-408.fc27.0 827 kB/s | 164 kB 00:00 (31-32/48): perl-int 49% [=========- ] 2.0 MB/s | 10 MB 00:05 ETA (31/48): perl-macros-5.26.1-408.fc28.1.riscv64. 752 kB/s | 69 kB 00:00 (32-33/48): perl-int 50% [========== ] 2.0 MB/s | 11 MB 00:05 ETA (32/48): perl-threads-shared-1.58-1.fc27.riscv6 767 kB/s | 91 kB 00:00 (33-34/48): perl-int 51% [========== ] 2.0 MB/s | 11 MB 00:05 ETA (33/48): perl-Socket-2.027-1.fc27.riscv64.rpm 831 kB/s | 95 kB 00:00 (34-35/48): perl-int 53% [==========- ] 2.0 MB/s | 11 MB 00:05 ETA (34/48): perl-Pod-Usage-1.69-408.fc27.0.riscv64 777 kB/s | 89 kB 00:00 (35-36/48): perl-lib 54% [==========- ] 2.0 MB/s | 12 MB 00:04 ETA (35/48): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 859 kB/s | 139 kB 00:00 (36-37/48): perl-lib 56% [=========== ] 2.0 MB/s | 12 MB 00:04 ETA (36/48): perl-podlators-4.09-408.fc27.0.riscv64 853 kB/s | 157 kB 00:00 (37-38/48): perl-lib 58% [===========- ] 2.0 MB/s | 12 MB 00:04 ETA (37/48): perl-File-Temp-0.230.400-408.fc27.0.ri 810 kB/s | 103 kB 00:00 (38-39/48): perl-lib 59% [===========- ] 2.0 MB/s | 13 MB 00:04 ETA (38/48): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 749 kB/s | 97 kB 00:00 (39-40/48): perl-lib 61% [============ ] 2.0 MB/s | 13 MB 00:04 ETA (39/48): perl-Pod-Simple-3.35-408.fc27.0.riscv6 905 kB/s | 271 kB 00:00 (40-41/48): perl-int 65% [============= ] 2.0 MB/s | 14 MB 00:03 ETA (40-42/48): perl-int 69% [=============- ] 2.0 MB/s | 15 MB 00:03 ETA (40-42/48): perl-int 73% [==============- ] 2.1 MB/s | 16 MB 00:02 ETA (40-42/48): perl-Enc 77% [===============- ] 2.2 MB/s | 16 MB 00:02 ETA (40/48): perl-libs-5.26.1-408.fc28.1.riscv64.ri 727 kB/s | 3.3 MB 00:04 (41-42/48): perl-int 79% [===============- ] 2.0 MB/s | 17 MB 00:02 ETA (41/48): perl-Time-Local-1.250-394.fc27.noarch. 666 kB/s | 30 kB 00:00 (42-43/48): perl-int 79% [===============- ] 2.0 MB/s | 17 MB 00:02 ETA (42/48): perl-MIME-Base64-3.15-408.fc27.0.riscv 879 kB/s | 111 kB 00:00 (43-44/48): perl-int 81% [================ ] 2.0 MB/s | 17 MB 00:02 ETA (43/48): perl-Storable-2.62-408.fc27.0.riscv64. 892 kB/s | 205 kB 00:00 (44-45/48): perl-int 83% [================- ] 2.0 MB/s | 18 MB 00:01 ETA (44/48): perl-Term-ANSIColor-4.06-408.fc27.0.ri 867 kB/s | 94 kB 00:00 (45-46/48): perl-Enc 85% [================= ] 2.0 MB/s | 18 MB 00:01 ETA (45/48): perl-Encode-2.94-16.fc27.riscv64.rpm 665 kB/s | 1.4 MB 00:02 (46-47/48): perl-Ter 85% [================= ] 1.9 MB/s | 18 MB 00:01 ETA (46/48): perl-Term-Cap-1.17-408.fc27.0.riscv64. 266 kB/s | 78 kB 00:00 (47-48/48): perl-Pod 86% [================= ] 1.9 MB/s | 18 MB 00:01 ETA (47/48): perl-Pod-Escapes-1.07-408.fc27.0.riscv 728 kB/s | 77 kB 00:00 (48/48): perl-interp 86% [================= ] 1.9 MB/s | 18 MB 00:01 ETA (48/48): perl-interp 90% [================== ] 2.0 MB/s | 19 MB 00:01 ETA (48/48): perl-interp 94% [==================- ] 2.0 MB/s | 20 MB 00:00 ETA (48/48): perl-interp 98% [===================-] 2.1 MB/s | 21 MB 00:00 ETA (48/48): perl-interpreter-5.26.1-408.fc28.1.ris 937 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 21 MB 00:11 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/48 Installing : perl-Exporter-5.72-408.f [===== ] 1/48 Installing : perl-Exporter-5.72-408.f [======= ] 1/48 Installing : perl-Exporter-5.72-408.f [==================== ] 1/48 Installing : perl-Exporter-5.72-408.f [======================== ] 1/48 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/48 Installing : perl-libs-4:5.26.1-408.f [ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/48 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/48 Installing : perl-Carp-1.42-408.fc27. [ ] 3/48 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/48 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/48 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/48 Installing : perl-Scalar-List-Utils-3 [ ] 4/48 Installing : perl-Scalar-List-Utils-3 [= ] 4/48 Installing : perl-Scalar-List-Utils-3 [== ] 4/48 Installing : perl-Scalar-List-Utils-3 [=== ] 4/48 Installing : perl-Scalar-List-Utils-3 [===== ] 4/48 Installing : perl-Scalar-List-Utils-3 [======== ] 4/48 Installing : perl-Scalar-List-Utils-3 [========== ] 4/48 Installing : perl-Scalar-List-Utils-3 [============= ] 4/48 Installing : perl-Scalar-List-Utils-3 [================ ] 4/48 Installing : perl-Scalar-List-Utils-3 [================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/48 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/48 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/48 Installing : perl-Text-ParseWords-3.3 [ ] 5/48 Installing : perl-Text-ParseWords-3.3 [======= ] 5/48 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/48 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/48 Installing : libcroco-0.6.12-4.fc28.r [ ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [=== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [==== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [===== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [====== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [======= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [======== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [========= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [========== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [=========== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [============ ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [============= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [============== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [=============== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [================ ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [================= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [=================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [==================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [===================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [====================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [======================= ] 6/48 Installing : libcroco-0.6.12-4.fc28.r [======================== ] 6/48 Installing : libcroco-0.6.12-4.fc28.riscv64 6/48 Running scriptlet: libcroco-0.6.12-4.fc28.riscv64 6/48 Installing : gettext-libs-0.19.8.1-14 [ ] 7/48 Installing : gettext-libs-0.19.8.1-14 [= ] 7/48 Installing : gettext-libs-0.19.8.1-14 [== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [=== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [==== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [===== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [====== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [======= ] 7/48random: crng init done Installing : gettext-libs-0.19.8.1-14 [======== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [========= ] 7/48 Installing : gettext-libs-0.19.8.1-14 [========== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [=========== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [============ ] 7/48 Installing : gettext-libs-0.19.8.1-14 [============= ] 7/48 Installing : gettext-libs-0.19.8.1-14 [============== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [=============== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [================ ] 7/48 Installing : gettext-libs-0.19.8.1-14 [================= ] 7/48 Installing : gettext-libs-0.19.8.1-14 [================== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [=================== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [==================== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [===================== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [====================== ] 7/48 Installing : gettext-libs-0.19.8.1-14 [======================= ] 7/48 Installing : gettext-libs-0.19.8.1-14 [======================== ] 7/48 Installing : gettext-libs-0.19.8.1-14.fc28.riscv64 7/48 Installing : gettext-0.19.8.1-14.fc28 [ ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [=== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [==== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [===== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [====== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [======= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [======== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [========= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [========== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [=========== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [============ ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [============= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [============== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [=============== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [================ ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [================= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [=================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [==================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [===================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [====================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [======================= ] 8/48 Installing : gettext-0.19.8.1-14.fc28 [======================== ] 8/48 Installing : gettext-0.19.8.1-14.fc28.riscv64 8/48 Running scriptlet: gettext-0.19.8.1-14.fc28.riscv64 8/48 install-info: No such file or directory for /usr/share/info/gettext.info.gz Installing : perl-Term-ANSIColor-4.06 [ ] 9/48 Installing : perl-Term-ANSIColor-4.06 [==== ] 9/48 Installing : perl-Term-ANSIColor-4.06 [================== ] 9/48 Installing : perl-Term-ANSIColor-4.06 [======================== ] 9/48 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 9/48 Installing : perl-macros-4:5.26.1-408 [ ] 10/48 Installing : perl-macros-4:5.26.1-408 [======================== ] 10/48 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 10/48 Installing : perl-constant-1.33-408.f [ ] 11/48 Installing : perl-constant-1.33-408.f [======= ] 11/48 Installing : perl-constant-1.33-408.f [======================== ] 11/48 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 11/48 Installing : perl-Errno-1.28-408.fc28 [ ] 12/48 Installing : perl-Errno-1.28-408.fc28 [================= ] 12/48 Installing : perl-Errno-1.28-408.fc28 [======================== ] 12/48 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 12/48 Installing : perl-File-Path-2.15-1.fc [ ] 13/48 Installing : perl-File-Path-2.15-1.fc [==== ] 13/48 Installing : perl-File-Path-2.15-1.fc [======== ] 13/48 Installing : perl-File-Path-2.15-1.fc [==================== ] 13/48 Installing : perl-File-Path-2.15-1.fc [======================== ] 13/48 Installing : perl-File-Path-2.15-1.fc27.noarch 13/48 Installing : perl-PathTools-3.67-408. [ ] 14/48 Installing : perl-PathTools-3.67-408. [== ] 14/48 Installing : perl-PathTools-3.67-408. [=== ] 14/48 Installing : perl-PathTools-3.67-408. [==== ] 14/48 Installing : perl-PathTools-3.67-408. [======= ] 14/48 Installing : perl-PathTools-3.67-408. [========= ] 14/48 Installing : perl-PathTools-3.67-408. [=========== ] 14/48 Installing : perl-PathTools-3.67-408. [============== ] 14/48 Installing : perl-PathTools-3.67-408. [================== ] 14/48 Installing : perl-PathTools-3.67-408. [==================== ] 14/48 Installing : perl-PathTools-3.67-408. [===================== ] 14/48 Installing : perl-PathTools-3.67-408. [====================== ] 14/48 Installing : perl-PathTools-3.67-408. [======================= ] 14/48 Installing : perl-PathTools-3.67-408. [======================== ] 14/48 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 14/48 Installing : perl-threads-shared-1.58 [ ] 15/48 Installing : perl-threads-shared-1.58 [=== ] 15/48 Installing : perl-threads-shared-1.58 [======= ] 15/48 Installing : perl-threads-shared-1.58 [========== ] 15/48 Installing : perl-threads-shared-1.58 [============== ] 15/48 Installing : perl-threads-shared-1.58 [================= ] 15/48 Installing : perl-threads-shared-1.58 [==================== ] 15/48 Installing : perl-threads-shared-1.58 [======================= ] 15/48 Installing : perl-threads-shared-1.58 [======================== ] 15/48 Installing : perl-threads-shared-1.58-1.fc27.riscv64 15/48 Installing : perl-threads-1:2.21-1.fc [ ] 16/48 Installing : perl-threads-1:2.21-1.fc [=== ] 16/48 Installing : perl-threads-1:2.21-1.fc [====== ] 16/48 Installing : perl-threads-1:2.21-1.fc [========= ] 16/48 Installing : perl-threads-1:2.21-1.fc [============= ] 16/48 Installing : perl-threads-1:2.21-1.fc [================ ] 16/48 Installing : perl-threads-1:2.21-1.fc [================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [===================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [====================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [======================= ] 16/48 Installing : perl-threads-1:2.21-1.fc [======================== ] 16/48 Installing : perl-threads-1:2.21-1.fc27.riscv64 16/48 Installing : perl-Text-Tabs+Wrap-2013 [ ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 17/48 Installing : perl-parent-1:0.236-408. [ ] 18/48 Installing : perl-parent-1:0.236-408. [============ ] 18/48 Installing : perl-parent-1:0.236-408. [======================== ] 18/48 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 18/48 Installing : perl-Unicode-Normalize-1 [ ] 19/48 Installing : perl-Unicode-Normalize-1 [= ] 19/48 Installing : perl-Unicode-Normalize-1 [== ] 19/48 Installing : perl-Unicode-Normalize-1 [=== ] 19/48 Installing : perl-Unicode-Normalize-1 [==== ] 19/48 Installing : perl-Unicode-Normalize-1 [===== ] 19/48 Installing : perl-Unicode-Normalize-1 [====== ] 19/48 Installing : perl-Unicode-Normalize-1 [======= ] 19/48 Installing : perl-Unicode-Normalize-1 [======== ] 19/48 Installing : perl-Unicode-Normalize-1 [========= ] 19/48 Installing : perl-Unicode-Normalize-1 [========== ] 19/48 Installing : perl-Unicode-Normalize-1 [============ ] 19/48 Installing : perl-Unicode-Normalize-1 [============= ] 19/48 Installing : perl-Unicode-Normalize-1 [============== ] 19/48 Installing : perl-Unicode-Normalize-1 [=============== ] 19/48 Installing : perl-Unicode-Normalize-1 [================ ] 19/48 Installing : perl-Unicode-Normalize-1 [================= ] 19/48 Installing : perl-Unicode-Normalize-1 [================== ] 19/48 Installing : perl-Unicode-Normalize-1 [=================== ] 19/48 Installing : perl-Unicode-Normalize-1 [==================== ] 19/48 Installing : perl-Unicode-Normalize-1 [===================== ] 19/48 Installing : perl-Unicode-Normalize-1 [====================== ] 19/48 Installing : perl-Unicode-Normalize-1 [======================= ] 19/48 Installing : perl-Unicode-Normalize-1 [======================== ] 19/48 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 19/48 Installing : perl-interpreter-4:5.26. [ ] 20/48 Installing : perl-interpreter-4:5.26. [= ] 20/48 Installing : perl-interpreter-4:5.26. [== ] 20/48 Installing : perl-interpreter-4:5.26. [=== ] 20/48 Installing : perl-interpreter-4:5.26. [==== ] 20/48 Installing : perl-interpreter-4:5.26. [===== ] 20/48 Installing : perl-interpreter-4:5.26. [====== ] 20/48 Installing : perl-interpreter-4:5.26. [======= ] 20/48 Installing : perl-interpreter-4:5.26. [======== ] 20/48 Installing : perl-interpreter-4:5.26. [========= ] 20/48 Installing : perl-interpreter-4:5.26. [========== ] 20/48 Installing : perl-interpreter-4:5.26. [=========== ] 20/48 Installing : perl-interpreter-4:5.26. [============ ] 20/48 Installing : perl-interpreter-4:5.26. [============= ] 20/48 Installing : perl-interpreter-4:5.26. [============== ] 20/48 Installing : perl-interpreter-4:5.26. [=============== ] 20/48 Installing : perl-interpreter-4:5.26. [================ ] 20/48 Installing : perl-interpreter-4:5.26. [================= ] 20/48 Installing : perl-interpreter-4:5.26. [================== ] 20/48 Installing : perl-interpreter-4:5.26. [=================== ] 20/48 Installing : perl-interpreter-4:5.26. [==================== ] 20/48 Installing : perl-interpreter-4:5.26. [===================== ] 20/48 Installing : perl-interpreter-4:5.26. [====================== ] 20/48 Installing : perl-interpreter-4:5.26. [======================= ] 20/48 Installing : perl-interpreter-4:5.26. [======================== ] 20/48 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 20/48 Installing : perl-Socket-4:2.027-1.fc [ ] 21/48 Installing : perl-Socket-4:2.027-1.fc [=== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [======= ] 21/48 Installing : perl-Socket-4:2.027-1.fc [========== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [============== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [================= ] 21/48 Installing : perl-Socket-4:2.027-1.fc [==================== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [===================== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [====================== ] 21/48 Installing : perl-Socket-4:2.027-1.fc [======================= ] 21/48 Installing : perl-Socket-4:2.027-1.fc [======================== ] 21/48 Installing : perl-Socket-4:2.027-1.fc27.riscv64 21/48 Installing : perl-IO-1.38-408.fc28.1. [ ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [= ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [=== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [==== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [===== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [====== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [======= ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [======== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [============== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [================= ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 22/48 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 22/48 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 22/48 Installing : perl-File-Temp-0.230.400 [ ] 23/48 Installing : perl-File-Temp-0.230.400 [=== ] 23/48 Installing : perl-File-Temp-0.230.400 [============ ] 23/48 Installing : perl-File-Temp-0.230.400 [===================== ] 23/48 Installing : perl-File-Temp-0.230.400 [======================== ] 23/48 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 23/48 Installing : perl-Storable-1:2.62-408 [ ] 24/48 Installing : perl-Storable-1:2.62-408 [== ] 24/48 Installing : perl-Storable-1:2.62-408 [==== ] 24/48 Installing : perl-Storable-1:2.62-408 [====== ] 24/48 Installing : perl-Storable-1:2.62-408 [======== ] 24/48 Installing : perl-Storable-1:2.62-408 [========== ] 24/48 Installing : perl-Storable-1:2.62-408 [============ ] 24/48 Installing : perl-Storable-1:2.62-408 [============== ] 24/48 Installing : perl-Storable-1:2.62-408 [================ ] 24/48 Installing : perl-Storable-1:2.62-408 [================== ] 24/48 Installing : perl-Storable-1:2.62-408 [==================== ] 24/48 Installing : perl-Storable-1:2.62-408 [====================== ] 24/48 Installing : perl-Storable-1:2.62-408 [======================== ] 24/48 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 24/48 Installing : perl-MIME-Base64-3.15-40 [ ] 25/48 Installing : perl-MIME-Base64-3.15-40 [= ] 25/48 Installing : perl-MIME-Base64-3.15-40 [== ] 25/48 Installing : perl-MIME-Base64-3.15-40 [========== ] 25/48 Installing : perl-MIME-Base64-3.15-40 [================== ] 25/48 Installing : perl-MIME-Base64-3.15-40 [======================= ] 25/48 Installing : perl-MIME-Base64-3.15-40 [======================== ] 25/48 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 25/48 Installing : perl-Term-Cap-1.17-408.f [ ] 26/48 Installing : perl-Term-Cap-1.17-408.f [==== ] 26/48 Installing : perl-Term-Cap-1.17-408.f [======================== ] 26/48 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 26/48 Installing : perl-Pod-Escapes-1:1.07- [ ] 27/48 Installing : perl-Pod-Escapes-1:1.07- [==== ] 27/48 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 27/48 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 27/48 Installing : perl-Time-Local-1:1.250- [ ] 28/48 Installing : perl-Time-Local-1:1.250- [= ] 28/48 Installing : perl-Time-Local-1:1.250- [===== ] 28/48 Installing : perl-Time-Local-1:1.250- [======== ] 28/48 Installing : perl-Time-Local-1:1.250- [========= ] 28/48 Installing : perl-Time-Local-1:1.250- [================= ] 28/48 Installing : perl-Time-Local-1:1.250- [=================== ] 28/48 Installing : perl-Time-Local-1:1.250- [======================== ] 28/48 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 28/48 Installing : perl-HTTP-Tiny-0.070-408 [ ] 29/48 Installing : perl-HTTP-Tiny-0.070-408 [== ] 29/48 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 29/48 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 29/48 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 29/48 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 29/48 Installing : perl-Pod-Simple-1:3.35-4 [ ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 30/48 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 30/48 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 30/48 Installing : perl-Encode-4:2.94-16.fc [ ] 31/48 Installing : perl-Encode-4:2.94-16.fc [= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [=== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [==== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [===== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [====== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [======= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [======== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [========= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [========== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [=========== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [============ ] 31/48 Installing : perl-Encode-4:2.94-16.fc [============= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [============== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [=============== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [================ ] 31/48 Installing : perl-Encode-4:2.94-16.fc [================= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [=================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [==================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [===================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [====================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc [======================= ] 31/48 Installing : perl-Encode-4:2.94-16.fc [======================== ] 31/48 Installing : perl-Encode-4:2.94-16.fc27.riscv64 31/48 Installing : perl-Getopt-Long-1:2.50- [ ] 32/48 Installing : perl-Getopt-Long-1:2.50- [=== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [==== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [===== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [====== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [======= ] 32/48 Installing : perl-Getopt-Long-1:2.50- [========= ] 32/48 Installing : perl-Getopt-Long-1:2.50- [=============== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [===================== ] 32/48 Installing : perl-Getopt-Long-1:2.50- [======================== ] 32/48 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 32/48 Installing : perl-Pod-Usage-4:1.69-40 [ ] 33/48 Installing : perl-Pod-Usage-4:1.69-40 [== ] 33/48 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 33/48 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 33/48 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 33/48 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 33/48 Installing : perl-podlators-4.09-408. [ ] 34/48 Installing : perl-podlators-4.09-408. [= ] 34/48 Installing : perl-podlators-4.09-408. [== ] 34/48 Installing : perl-podlators-4.09-408. [=== ] 34/48 Installing : perl-podlators-4.09-408. [==== ] 34/48 Installing : perl-podlators-4.09-408. [===== ] 34/48 Installing : perl-podlators-4.09-408. [====== ] 34/48 Installing : perl-podlators-4.09-408. [======= ] 34/48 Installing : perl-podlators-4.09-408. [=========== ] 34/48 Installing : perl-podlators-4.09-408. [=============== ] 34/48 Installing : perl-podlators-4.09-408. [================ ] 34/48 Installing : perl-podlators-4.09-408. [================= ] 34/48 Installing : perl-podlators-4.09-408. [===================== ] 34/48 Installing : perl-podlators-4.09-408. [====================== ] 34/48 Installing : perl-podlators-4.09-408. [======================= ] 34/48 Installing : perl-podlators-4.09-408. [======================== ] 34/48 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 34/48 Installing : perl-Pod-Perldoc-3.28-40 [ ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [= ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 35/48 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 35/48 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 35/48 Installing : perl-Thread-Queue-3.12-4 [ ] 36/48 Installing : perl-Thread-Queue-3.12-4 [===== ] 36/48 Installing : perl-Thread-Queue-3.12-4 [====== ] 36/48 Installing : perl-Thread-Queue-3.12-4 [======================== ] 36/48 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 36/48 Installing : perl-Data-Dumper-2.167-4 [ ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [==== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [============ ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=============== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=================== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [====================== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======================= ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======================== ] 37/48 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 37/48 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 38/48 Installing : xz-5.2.3-5.fc28.riscv64 38/48 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 39/48 Installing : m4-1.4.18-5.fc28.riscv64 39/48 Running scriptlet: m4-1.4.18-5.fc28.riscv64 39/48 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 40/48 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 40/48 Installing : tar-2:1.29-7.fc27.riscv64 40/48 Running scriptlet: tar-2:1.29-7.fc27.riscv64 40/48 Installing : emacs-filesystem-1:25.3- [ ] 41/48 Installing : emacs-filesystem-1:25.3- [===== ] 41/48 Installing : emacs-filesystem-1:25.3- [============ ] 41/48 Installing : emacs-filesystem-1:25.3- [=================== ] 41/48 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 41/48 Installing : autoconf-2.69-26.fc28.no [ ] 42/48 Installing : autoconf-2.69-26.fc28.no [= ] 42/48 Installing : autoconf-2.69-26.fc28.no [== ] 42/48 Installing : autoconf-2.69-26.fc28.no [=== ] 42/48 Installing : autoconf-2.69-26.fc28.no [==== ] 42/48 Installing : autoconf-2.69-26.fc28.no [===== ] 42/48 Installing : autoconf-2.69-26.fc28.no [====== ] 42/48 Installing : autoconf-2.69-26.fc28.no [======= ] 42/48 Installing : autoconf-2.69-26.fc28.no [======== ] 42/48 Installing : autoconf-2.69-26.fc28.no [========= ] 42/48 Installing : autoconf-2.69-26.fc28.no [========== ] 42/48 Installing : autoconf-2.69-26.fc28.no [=========== ] 42/48 Installing : autoconf-2.69-26.fc28.no [============ ] 42/48 Installing : autoconf-2.69-26.fc28.no [============= ] 42/48 Installing : autoconf-2.69-26.fc28.no [============== ] 42/48 Installing : autoconf-2.69-26.fc28.no [=============== ] 42/48 Installing : autoconf-2.69-26.fc28.no [================ ] 42/48 Installing : autoconf-2.69-26.fc28.no [================= ] 42/48 Installing : autoconf-2.69-26.fc28.no [================== ] 42/48 Installing : autoconf-2.69-26.fc28.no [=================== ] 42/48 Installing : autoconf-2.69-26.fc28.no [==================== ] 42/48 Installing : autoconf-2.69-26.fc28.no [===================== ] 42/48 Installing : autoconf-2.69-26.fc28.no [====================== ] 42/48 Installing : autoconf-2.69-26.fc28.no [======================= ] 42/48 Installing : autoconf-2.69-26.fc28.no [======================== ] 42/48 Installing : autoconf-2.69-26.fc28.noarch 42/48 Running scriptlet: autoconf-2.69-26.fc28.noarch 42/48 Installing : automake-1.15.1-3.fc28.n [ ] 43/48 Installing : automake-1.15.1-3.fc28.n [= ] 43/48 Installing : automake-1.15.1-3.fc28.n [== ] 43/48 Installing : automake-1.15.1-3.fc28.n [=== ] 43/48 Installing : automake-1.15.1-3.fc28.n [==== ] 43/48 Installing : automake-1.15.1-3.fc28.n [===== ] 43/48 Installing : automake-1.15.1-3.fc28.n [====== ] 43/48 Installing : automake-1.15.1-3.fc28.n [======= ] 43/48 Installing : automake-1.15.1-3.fc28.n [======== ] 43/48 Installing : automake-1.15.1-3.fc28.n [========= ] 43/48 Installing : automake-1.15.1-3.fc28.n [========== ] 43/48 Installing : automake-1.15.1-3.fc28.n [=========== ] 43/48 Installing : automake-1.15.1-3.fc28.n [============ ] 43/48 Installing : automake-1.15.1-3.fc28.n [============= ] 43/48 Installing : automake-1.15.1-3.fc28.n [============== ] 43/48 Installing : automake-1.15.1-3.fc28.n [=============== ] 43/48 Installing : automake-1.15.1-3.fc28.n [================ ] 43/48 Installing : automake-1.15.1-3.fc28.n [================= ] 43/48 Installing : automake-1.15.1-3.fc28.n [================== ] 43/48 Installing : automake-1.15.1-3.fc28.n [=================== ] 43/48 Installing : automake-1.15.1-3.fc28.n [==================== ] 43/48 Installing : automake-1.15.1-3.fc28.n [===================== ] 43/48 Installing : automake-1.15.1-3.fc28.n [====================== ] 43/48 Installing : automake-1.15.1-3.fc28.n [======================= ] 43/48 Installing : automake-1.15.1-3.fc28.n [======================== ] 43/48 Installing : automake-1.15.1-3.fc28.noarch 43/48 Running scriptlet: automake-1.15.1-3.fc28.noarch 43/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [ ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [=== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [===== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [======= ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [========= ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [=========== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [============= ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [=============== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [================= ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [=================== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [===================== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [======================= ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.r [======================== ] 44/48 Installing : gmp-c++-1:6.1.2-7.fc27.riscv64 44/48 Running scriptlet: gmp-c++-1:6.1.2-7.fc27.riscv64 44/48 Installing : gettext-common-devel-0.1 [ ] 45/48 Installing : gettext-common-devel-0.1 [== ] 45/48 Installing : gettext-common-devel-0.1 [==== ] 45/48 Installing : gettext-common-devel-0.1 [====== ] 45/48 Installing : gettext-common-devel-0.1 [======== ] 45/48 Installing : gettext-common-devel-0.1 [========== ] 45/48 Installing : gettext-common-devel-0.1 [============ ] 45/48 Installing : gettext-common-devel-0.1 [============== ] 45/48 Installing : gettext-common-devel-0.1 [================ ] 45/48 Installing : gettext-common-devel-0.1 [================== ] 45/48 Installing : gettext-common-devel-0.1 [==================== ] 45/48 Installing : gettext-common-devel-0.1 [====================== ] 45/48 Installing : gettext-common-devel-0.1 [======================== ] 45/48 Installing : gettext-common-devel-0.19.8.1-14.fc28.noarch 45/48 Installing : gettext-devel-0.19.8.1-1 [ ] 46/48 Installing : gettext-devel-0.19.8.1-1 [= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [=== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [==== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [===== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [====== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [======= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [======== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [========= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [========== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [=========== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [============ ] 46/48 Installing : gettext-devel-0.19.8.1-1 [============= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [============== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [=============== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [================ ] 46/48 Installing : gettext-devel-0.19.8.1-1 [================= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [================== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [=================== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [==================== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [===================== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [====================== ] 46/48 Installing : gettext-devel-0.19.8.1-1 [======================= ] 46/48 Installing : gettext-devel-0.19.8.1-1 [======================== ] 46/48 Installing : gettext-devel-0.19.8.1-14.fc28.riscv64 46/48 Running scriptlet: gettext-devel-0.19.8.1-14.fc28.riscv64 46/48 install-info: No such file or directory for /usr/share/info/autosprintf.info Installing : gmp-devel-1:6.1.2-7.fc27 [ ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [===== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [====== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [======== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [=========== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [============= ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [=============== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [================= ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [=================== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [===================== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [======================= ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27 [======================== ] 47/48 Installing : gmp-devel-1:6.1.2-7.fc27.riscv64 47/48 Running scriptlet: gmp-devel-1:6.1.2-7.fc27.riscv64 47/48 Installing : libtool-2.4.6-21.fc27.ri [ ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [=== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [==== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [===== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [====== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [======= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [======== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [========= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [========== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [============ ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [============= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [============== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [================ ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [================= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [================== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 48/48 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 48/48 Installing : libtool-2.4.6-21.fc27.riscv64 48/48 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 48/48 Verifying : gettext-devel-0.19.8.1-14.fc28.riscv64 1/48 Verifying : gmp-devel-1:6.1.2-7.fc27.riscv64 2/48 Verifying : gettext-0.19.8.1-14.fc28.riscv64 3/48 Verifying : gettext-common-devel-0.19.8.1-14.fc28.noarch 4/48 Verifying : gettext-libs-0.19.8.1-14.fc28.riscv64 5/48 Verifying : gmp-c++-1:6.1.2-7.fc27.riscv64 6/48 Verifying : autoconf-2.69-26.fc28.noarch 7/48 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 8/48 Verifying : automake-1.15.1-3.fc28.noarch 9/48 Verifying : libtool-2.4.6-21.fc27.riscv64 10/48 Verifying : tar-2:1.29-7.fc27.riscv64 11/48 Verifying : m4-1.4.18-5.fc28.riscv64 12/48 Verifying : xz-5.2.3-5.fc28.riscv64 13/48 Verifying : libcroco-0.6.12-4.fc28.riscv64 14/48 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 15/48 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 16/48 Verifying : perl-File-Path-2.15-1.fc27.noarch 17/48 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 18/48 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 19/48 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 20/48 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 21/48 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 22/48 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 23/48 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 24/48 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 25/48 Verifying : perl-threads-1:2.21-1.fc27.riscv64 26/48 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 27/48 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 28/48 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 29/48 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 30/48 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 31/48 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 32/48 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 33/48 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 34/48 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 35/48 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 36/48 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 37/48 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 38/48 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 39/48 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 40/48 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 41/48 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 42/48 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 43/48 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 44/48 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 45/48 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 46/48 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 47/48 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 48/48 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 gettext-devel.riscv64 0.19.8.1-14.fc28 gmp-devel.riscv64 1:6.1.2-7.fc27 libtool.riscv64 2.4.6-21.fc27 m4.riscv64 1.4.18-5.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 gettext.riscv64 0.19.8.1-14.fc28 gettext-common-devel.noarch 0.19.8.1-14.fc28 gettext-libs.riscv64 0.19.8.1-14.fc28 gmp-c++.riscv64 1:6.1.2-7.fc27 libcroco.riscv64 0.6.12-4.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 tar.riscv64 2:1.29-7.fc27 xz.riscv64 5.2.3-5.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:04:46 ago on Thu Feb 22 15:23:36 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:05:08 ago on Thu Feb 22 15:23:36 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group xz findutils make gawk cpio bash diffutils gzip util-linux grep sed bzip2 info shadow-utils unzip coreutils patch which fedora-release tar rpm-build redhat-rpm-config ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 29 Packages Total download size: 12 M Installed size: 47 M Downloading Packages: (1/29): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/29): redhat-rpm-config-96-1.fc28.0.riscv64.n 736 kB/s | 75 kB 00:00 (2-3/29): make-4.2.1 1% [ ] 1.4 MB/s | 235 kB 00:07 ETA (2/29): nim-srpm-macros-1-1.fc28.noarch.rpm 304 kB/s | 7.6 kB 00:00 (3-4/29): make-4.2.1 2% [ ] 1.4 MB/s | 274 kB 00:08 ETA (3/29): ocaml-srpm-macros-5-2.fc27.noarch.rpm 318 kB/s | 7.8 kB 00:00 (4-5/29): make-4.2.1 2% [- ] 1.4 MB/s | 314 kB 00:08 ETA (4/29): openblas-srpm-macros-2-2.fc27.noarch.rp 271 kB/s | 6.6 kB 00:00 (5-6/29): make-4.2.1 2% [- ] 1.4 MB/s | 353 kB 00:08 ETA (5/29): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 355 kB/s | 9.0 kB 00:00 (6-7/29): make-4.2.1 3% [- ] 1.4 MB/s | 394 kB 00:08 ETA (6/29): rust-srpm-macros-5-1.fc28.noarch.rpm 319 kB/s | 8.0 kB 00:00 (7-8/29): make-4.2.1 3% [- ] 1.4 MB/s | 434 kB 00:08 ETA (7/29): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 872 kB/s | 235 kB 00:00 (8-9/29): diffutils- 9% [=- ] 1.4 MB/s | 1.1 MB 00:07 ETA (8/29): make-4.2.1-6.fc27.riscv64.rpm 566 kB/s | 486 kB 00:00 (9-10/29): diffutils 12% [== ] 1.4 MB/s | 1.4 MB 00:07 ETA (9/29): which-2.21-4.fc28.riscv64.rpm 691 kB/s | 65 kB 00:00 (10-11/29): diffutil 13% [==- ] 1.5 MB/s | 1.6 MB 00:06 ETA (10/29): diffutils-3.6-3.fc28.riscv64.rpm 508 kB/s | 577 kB 00:01 (11-12/29): zstd-1.3 14% [==- ] 1.4 MB/s | 1.6 MB 00:06 ETA (11/29): patch-2.7.5-6.fc27.riscv64.rpm 656 kB/s | 270 kB 00:00 (12-13/29): zstd-1.3 20% [==== ] 1.5 MB/s | 2.4 MB 00:06 ETA (12/29): bzip2-1.0.6-24.fc28.riscv64.rpm 683 kB/s | 81 kB 00:00 (13-14/29): zstd-1.3 22% [====- ] 1.5 MB/s | 2.7 MB 00:05 ETA (13/29): unzip-6.0-36.fc28.riscv64.rpm 700 kB/s | 398 kB 00:00 (14-15/29): elfutils 24% [====- ] 1.5 MB/s | 2.8 MB 00:05 ETA (14/29): file-5.32-3.fc28.riscv64.rpm 682 kB/s | 81 kB 00:00 (15-16/29): elfutils 26% [===== ] 1.5 MB/s | 3.1 MB 00:05 ETA (15-17/29): binutils 33% [======- ] 1.6 MB/s | 3.9 MB 00:04 ETA (15/29): zstd-1.3.3-1.fc27.riscv64.rpm 643 kB/s | 1.1 MB 00:01 (16-17/29): binutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA (16/29): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 498 kB/s | 14 kB 00:00 (17-18/29): binutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA (17/29): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 526 kB/s | 15 kB 00:00 (18-19/29): binutils 39% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA (18/29): pkgconf-1.4.1-1.fc27.riscv64.rpm 600 kB/s | 35 kB 00:00 (19-20/29): elfutils 40% [======== ] 1.6 MB/s | 4.7 MB 00:04 ETA (19/29): libpkgconf-1.4.1-1.fc27.riscv64.rpm 819 kB/s | 74 kB 00:00 (20-21/29): elfutils 42% [======== ] 1.6 MB/s | 4.9 MB 00:04 ETA (20/29): elfutils-0.170-4.fc28.riscv64.rpm 586 kB/s | 791 kB 00:01 (21-22/29): binutils 42% [======== ] 1.5 MB/s | 4.9 MB 00:04 ETA (21/29): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 57 kB/s | 7.5 kB 00:00 (22/29): binutils-2. 42% [======== ] 1.5 MB/s | 4.9 MB 00:04 ETA (22/29): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 184 kB/s | 8.2 kB 00:00 (23-24/29): binutils 42% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA (23/29): gnat-srpm-macros-4-5.fc28.noarch.rpm 220 kB/s | 8.8 kB 00:00 (24/29): binutils-2. 42% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA (24/29): go-srpm-macros-2-11.fc28.noarch.rpm 201 kB/s | 8.4 kB 00:00 (25-26/29): binutils 43% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA (25/29): perl-srpm-macros-1-26.fc28.noarch.rpm 246 kB/s | 9.7 kB 00:00 (26/29): binutils-2. 43% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA (26/29): python-srpm-macros-3-26.fc28.noarch.rp 220 kB/s | 10 kB 00:00 (27-28/29): binutils 43% [========- ] 1.5 MB/s | 5.0 MB 00:04 ETA (27/29): dwz-0.12-5.fc28.riscv64.rpm 641 kB/s | 108 kB 00:00 (28-29/29): binutils 45% [========= ] 1.5 MB/s | 5.3 MB 00:04 ETA (28/29): zip-3.0-20.fc28.riscv64.rpm 953 kB/s | 271 kB 00:00 (29/29): binutils-2. 48% [=========- ] 1.5 MB/s | 5.7 MB 00:03 ETA (29/29): binutils-2. 55% [=========== ] 1.6 MB/s | 6.5 MB 00:03 ETA (29/29): binutils-2. 62% [============- ] 1.7 MB/s | 7.3 MB 00:02 ETA (29/29): binutils-2. 69% [=============- ] 1.7 MB/s | 8.1 MB 00:02 ETA (29/29): binutils-2. 76% [=============== ] 1.8 MB/s | 8.9 MB 00:01 ETA (29/29): binutils-2. 83% [================- ] 1.8 MB/s | 9.7 MB 00:01 ETA (29/29): binutils-2. 90% [================== ] 1.9 MB/s | 10 MB 00:00 ETA (29/29): binutils-2. 97% [===================-] 1.9 MB/s | 11 MB 00:00 ETA (29/29): binutils-2.30-1.fc28.riscv64.rpm 1.5 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.7 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/29 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/29 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/29 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/29 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/29 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/29 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/29 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/29 Installing : file-5.32-3.fc28.riscv64 1/29 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/29 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/29 Installing : unzip-6.0-36.fc28.riscv64 2/29 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/29 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/29 Installing : zip-3.0-20.fc28.riscv64 3/29 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/29 Installing : dwz-0.12-5.fc28.riscv64 4/29 Installing : python-srpm-macros-3-26. [ ] 5/29 Installing : python-srpm-macros-3-26. [======================= ] 5/29 Installing : python-srpm-macros-3-26.fc28.noarch 5/29 Installing : perl-srpm-macros-1-26.fc [ ] 6/29 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/29 Installing : perl-srpm-macros-1-26.fc28.noarch 6/29 Installing : go-srpm-macros-2-11.fc28 [ ] 7/29 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/29 Installing : go-srpm-macros-2-11.fc28.noarch 7/29 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/29 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/29 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/29 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/29 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/29 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/29 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/29 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/29 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/29 Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/29 Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/29 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/29 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/29 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/29 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/29 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/29 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/29 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/29 Installing : pkgconf-1.4.1-1.fc27.riscv64 12/29 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/29 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/29 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/29 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/29 Installing : pkgconf-pkg-config-1.4.1 [ ] 14/29 Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/29 Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/29 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/29 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/29 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/29 Installing : binutils-2.30-1.fc28.ris [ ] 15/29 Installing : binutils-2.30-1.fc28.ris [= ] 15/29 Installing : binutils-2.30-1.fc28.ris [== ] 15/29 Installing : binutils-2.30-1.fc28.ris [=== ] 15/29 Installing : binutils-2.30-1.fc28.ris [==== ] 15/29 Installing : binutils-2.30-1.fc28.ris [===== ] 15/29 Installing : binutils-2.30-1.fc28.ris [====== ] 15/29 Installing : binutils-2.30-1.fc28.ris [======= ] 15/29 Installing : binutils-2.30-1.fc28.ris [======== ] 15/29 Installing : binutils-2.30-1.fc28.ris [========= ] 15/29 Installing : binutils-2.30-1.fc28.ris [========== ] 15/29 Installing : binutils-2.30-1.fc28.ris [=========== ] 15/29 Installing : binutils-2.30-1.fc28.ris [============ ] 15/29 Installing : binutils-2.30-1.fc28.ris [============= ] 15/29 Installing : binutils-2.30-1.fc28.ris [============== ] 15/29 Installing : binutils-2.30-1.fc28.ris [=============== ] 15/29 Installing : binutils-2.30-1.fc28.ris [================ ] 15/29 Installing : binutils-2.30-1.fc28.ris [================= ] 15/29 Installing : binutils-2.30-1.fc28.ris [================== ] 15/29 Installing : binutils-2.30-1.fc28.ris [=================== ] 15/29 Installing : binutils-2.30-1.fc28.ris [==================== ] 15/29 Installing : binutils-2.30-1.fc28.ris [===================== ] 15/29 Installing : binutils-2.30-1.fc28.ris [====================== ] 15/29 Installing : binutils-2.30-1.fc28.ris [======================= ] 15/29 Installing : binutils-2.30-1.fc28.ris [======================== ] 15/29 Installing : binutils-2.30-1.fc28.riscv64 15/29 Running scriptlet: binutils-2.30-1.fc28.riscv64 15/29 Installing : elfutils-0.170-4.fc28.ri [ ] 16/29 Installing : elfutils-0.170-4.fc28.ri [= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [=== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [==== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [===== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [====== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [======= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [======== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [========= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [========== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [============ ] 16/29 Installing : elfutils-0.170-4.fc28.ri [============= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [============== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [================ ] 16/29 Installing : elfutils-0.170-4.fc28.ri [================= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [================== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/29 Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/29 Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/29 Installing : elfutils-0.170-4.fc28.riscv64 16/29 Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/29 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/29 Installing : bzip2-1.0.6-24.fc28.riscv64 17/29 Installing : patch-2.7.5-6.fc27.riscv [ ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [=== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [==== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [===== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [====== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [======= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [======== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [========= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [========== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [============ ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [============= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [============== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [================ ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [================= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 18/29 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 18/29 Installing : patch-2.7.5-6.fc27.riscv64 18/29 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 19/29 Installing : zstd-1.3.3-1.fc27.riscv64 19/29 Installing : rust-srpm-macros-5-1.fc2 [ ] 20/29 Installing : rust-srpm-macros-5-1.fc2 [=== ] 20/29 Installing : rust-srpm-macros-5-1.fc2 [===== ] 20/29 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 20/29 Installing : rust-srpm-macros-5-1.fc28.noarch 20/29 Installing : qt5-srpm-macros-5.10.0-1 [ ] 21/29 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 21/29 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 21/29 Installing : openblas-srpm-macros-2-2 [ ] 22/29 Installing : openblas-srpm-macros-2-2 [================ ] 22/29 Installing : openblas-srpm-macros-2-2.fc27.noarch 22/29 Installing : ocaml-srpm-macros-5-2.fc [ ] 23/29 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 23/29 Installing : ocaml-srpm-macros-5-2.fc27.noarch 23/29 Installing : nim-srpm-macros-1-1.fc28 [ ] 24/29 Installing : nim-srpm-macros-1-1.fc28 [=== ] 24/29 Installing : nim-srpm-macros-1-1.fc28 [===== ] 24/29 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 24/29 Installing : nim-srpm-macros-1-1.fc28.noarch 24/29 Installing : redhat-rpm-config-96-1.f [ ] 25/29 Installing : redhat-rpm-config-96-1.f [== ] 25/29 Installing : redhat-rpm-config-96-1.f [=== ] 25/29 Installing : redhat-rpm-config-96-1.f [========= ] 25/29 Installing : redhat-rpm-config-96-1.f [=========== ] 25/29 Installing : redhat-rpm-config-96-1.f [================= ] 25/29 Installing : redhat-rpm-config-96-1.f [================== ] 25/29 Installing : redhat-rpm-config-96-1.f [=================== ] 25/29 Installing : redhat-rpm-config-96-1.f [===================== ] 25/29 Installing : redhat-rpm-config-96-1.f [====================== ] 25/29 Installing : redhat-rpm-config-96-1.f [======================== ] 25/29 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 25/29 Installing : diffutils-3.6-3.fc28.ris [ ] 26/29 Installing : diffutils-3.6-3.fc28.ris [= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [=== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [==== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [===== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [====== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [======= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [======== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [========= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [========== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [=========== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [============ ] 26/29 Installing : diffutils-3.6-3.fc28.ris [============= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [============== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [=============== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [================ ] 26/29 Installing : diffutils-3.6-3.fc28.ris [================= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [================== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [=================== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [==================== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [===================== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [====================== ] 26/29 Installing : diffutils-3.6-3.fc28.ris [======================= ] 26/29 Installing : diffutils-3.6-3.fc28.ris [======================== ] 26/29 Installing : diffutils-3.6-3.fc28.riscv64 26/29 Running scriptlet: diffutils-3.6-3.fc28.riscv64 26/29 Installing : rpm-build-4.14.1-6.fc28. [ ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [= ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [=== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [==== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [===== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [====== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [======= ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [======== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [========= ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [============ ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [============== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [================ ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [================= ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 27/29 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 27/29 Installing : which-2.21-4.fc28.riscv6 [ ] 28/29 Installing : which-2.21-4.fc28.riscv6 [===== ] 28/29 Installing : which-2.21-4.fc28.riscv6 [=========== ] 28/29 Installing : which-2.21-4.fc28.riscv6 [=============== ] 28/29 Installing : which-2.21-4.fc28.riscv6 [================ ] 28/29 Installing : which-2.21-4.fc28.riscv6 [================= ] 28/29 Installing : which-2.21-4.fc28.riscv6 [================== ] 28/29 Installing : which-2.21-4.fc28.riscv6 [======================== ] 28/29 Installing : which-2.21-4.fc28.riscv64 28/29 Running scriptlet: which-2.21-4.fc28.riscv64 28/29 Installing : make-1:4.2.1-6.fc27.risc [ ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [=== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [==== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [===== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [====== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [======= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [======== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [========= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [========== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [============ ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [============= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [============== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [================ ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [================= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [================== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 29/29 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 29/29 Installing : make-1:4.2.1-6.fc27.riscv64 29/29 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 29/29 Verifying : diffutils-3.6-3.fc28.riscv64 1/29 Verifying : make-1:4.2.1-6.fc27.riscv64 2/29 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/29 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/29 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/29 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/29 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/29 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/29 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/29 Verifying : zstd-1.3.3-1.fc27.riscv64 10/29 Verifying : which-2.21-4.fc28.riscv64 11/29 Verifying : patch-2.7.5-6.fc27.riscv64 12/29 Verifying : unzip-6.0-36.fc28.riscv64 13/29 Verifying : bzip2-1.0.6-24.fc28.riscv64 14/29 Verifying : elfutils-0.170-4.fc28.riscv64 15/29 Verifying : file-5.32-3.fc28.riscv64 16/29 Verifying : binutils-2.30-1.fc28.riscv64 17/29 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 18/29 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 19/29 Verifying : pkgconf-1.4.1-1.fc27.riscv64 20/29 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 21/29 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 22/29 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 23/29 Verifying : gnat-srpm-macros-4-5.fc28.noarch 24/29 Verifying : go-srpm-macros-2-11.fc28.noarch 25/29 Verifying : perl-srpm-macros-1-26.fc28.noarch 26/29 Verifying : python-srpm-macros-3-26.fc28.noarch 27/29 Verifying : dwz-0.12-5.fc28.riscv64 28/29 Verifying : zip-3.0-20.fc28.riscv64 29/29 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:07:05 ago on Thu Feb 22 15:23:36 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 539 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 628 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 36% [======= ] 765 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 803 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 817 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [================= ] 947 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 935 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 954 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 957 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off