OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 11:14:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/nano-2.6.1-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/nano.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 5% [= ] 2.7 MB/s | 831 kB 00:04 ETA Local RPMS 11% [== ] 2.7 MB/s | 1.6 MB 00:04 ETA Local RPMS 18% [===- ] 2.7 MB/s | 2.6 MB 00:04 ETA Local RPMS 26% [===== ] 2.7 MB/s | 3.6 MB 00:03 ETA Local RPMS 32% [======- ] 2.8 MB/s | 4.5 MB 00:03 ETA Local RPMS 39% [=======- ] 2.8 MB/s | 5.5 MB 00:02 ETA Local RPMS 47% [========= ] 2.8 MB/s | 6.5 MB 00:02 ETA Local RPMS 54% [==========- ] 2.9 MB/s | 7.5 MB 00:02 ETA Local RPMS 55% [=========== ] 2.6 MB/s | 7.6 MB 00:02 ETA Local RPMS 62% [============ ] 2.6 MB/s | 8.6 MB 00:01 ETA Local RPMS 69% [=============- ] 2.7 MB/s | 9.5 MB 00:01 ETA Local RPMS 76% [=============== ] 2.7 MB/s | 10 MB 00:01 ETA Local RPMS 82% [================- ] 2.7 MB/s | 11 MB 00:00 ETA Local RPMS 89% [=================- ] 2.7 MB/s | 12 MB 00:00 ETA Local RPMS 96% [=================== ] 2.8 MB/s | 13 MB 00:00 ETA Local RPMS 2.3 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:39 ago on Thu Feb 22 11:14:36 2018. Package sed-4.4-4.fc28.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: file-devel riscv64 5.32-3.fc28 local 41 k gettext-devel riscv64 0.19.8.1-14.fc28 local 363 k groff riscv64 1.22.3-8.fc27 local 1.1 M ncurses-devel riscv64 6.1-2.20180129.fc27 local 527 k texinfo riscv64 6.5-1.fc28 local 1.2 M Installing dependencies: file riscv64 5.32-3.fc28 local 81 k gettext riscv64 0.19.8.1-14.fc28 local 812 k gettext-common-devel noarch 0.19.8.1-14.fc28 local 418 k gettext-libs riscv64 0.19.8.1-14.fc28 local 905 k libcroco riscv64 0.6.12-4.fc28 local 314 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k ncurses-c++-libs riscv64 6.1-2.20180129.fc27 local 185 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Class-Inspector noarch 1.32-1.fc27 local 35 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Text-Unidecode noarch 1.30-4.fc27 local 147 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-EastAsianWidth noarch 1.33-11.fc27 local 14 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libintl-perl riscv64 1.27-1.fc27 local 862 k perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k xz riscv64 5.2.3-5.fc28 local 212 k Installing weak dependencies: perl-File-ShareDir noarch 1.104-2.fc27 local 28 k Transaction Summary ================================================================================ Install 54 Packages Total download size: 22 M Installed size: 70 M Downloading Packages: (1/54): gettext-deve 0% [ ] --- B/s | 0 B --:-- ETA (1-3/54): groff-1.22 3% [- ] 2.5 MB/s | 767 kB 00:08 ETA (1/54): gettext-devel-0.19.8.1-14.fc28.riscv64. 791 kB/s | 363 kB 00:00 (2-3/54): groff-1.22 4% [- ] 2.5 MB/s | 1.1 MB 00:08 ETA (2-4/54): gettext-0. 8% [=- ] 2.5 MB/s | 1.9 MB 00:07 ETA (2/54): gettext-common-devel-0.19.8.1-14.fc28.n 887 kB/s | 418 kB 00:00 (3-4/54): groff-1.22 10% [== ] 2.5 MB/s | 2.3 MB 00:07 ETA (3/54): gettext-0.19.8.1-14.fc28.riscv64.rpm 777 kB/s | 812 kB 00:01 (4-5/54): groff-1.22 10% [== ] 2.4 MB/s | 2.4 MB 00:08 ETA (4/54): file-devel-5.32-3.fc28.riscv64.rpm 593 kB/s | 41 kB 00:00 (5-6/54): groff-1.22 11% [== ] 2.4 MB/s | 2.5 MB 00:08 ETA (5/54): file-5.32-3.fc28.riscv64.rpm 722 kB/s | 81 kB 00:00 (6-7/54): gettext-li 12% [==- ] 2.4 MB/s | 2.8 MB 00:07 ETA (6/54): groff-1.22.3-8.fc27.riscv64.rpm 690 kB/s | 1.1 MB 00:01 (7-8/54): ncurses-de 14% [==- ] 2.3 MB/s | 3.2 MB 00:08 ETA (7/54): ncurses-c++-libs-6.1-2.20180129.fc27.ri 749 kB/s | 185 kB 00:00 (8-9/54): ncurses-de 17% [=== ] 2.3 MB/s | 3.8 MB 00:07 ETA (8/54): ncurses-devel-6.1-2.20180129.fc27.riscv 613 kB/s | 527 kB 00:00 (9-10/54): texinfo-6 19% [===- ] 2.3 MB/s | 4.4 MB 00:07 ETA (9/54): perl-Text-Unidecode-1.30-4.fc27.noarch. 859 kB/s | 147 kB 00:00 (10-11/54): gettext- 22% [==== ] 2.3 MB/s | 4.8 MB 00:07 ETA (10/54): perl-Unicode-EastAsianWidth-1.33-11.fc 535 kB/s | 14 kB 00:00 (11-12/54): gettext- 22% [==== ] 2.3 MB/s | 4.9 MB 00:07 ETA (11/54): gettext-libs-0.19.8.1-14.fc28.riscv64. 549 kB/s | 905 kB 00:01 (12-13/54): texinfo- 22% [==== ] 2.2 MB/s | 4.9 MB 00:07 ETA (12/54): xz-5.2.3-5.fc28.riscv64.rpm 870 kB/s | 212 kB 00:00 (13-14/54): texinfo- 25% [===== ] 2.2 MB/s | 5.5 MB 00:07 ETA (13/54): perl-Carp-1.42-408.fc27.0.riscv64.noar 777 kB/s | 84 kB 00:00 (14-15/54): texinfo- 26% [===== ] 2.2 MB/s | 5.8 MB 00:07 ETA (14/54): perl-Exporter-5.72-408.fc27.0.riscv64. 760 kB/s | 87 kB 00:00 (15-16/54): texinfo- 27% [=====- ] 2.2 MB/s | 6.1 MB 00:07 ETA (15/54): perl-Getopt-Long-2.50-3.fc27.noarch.rp 812 kB/s | 61 kB 00:00 (16-17/54): perl-lib 28% [=====- ] 2.2 MB/s | 6.3 MB 00:07 ETA (16/54): perl-Pod-Simple-3.35-408.fc27.0.riscv6 895 kB/s | 271 kB 00:00 (17-18/54): perl-lib 32% [====== ] 2.2 MB/s | 7.1 MB 00:06 ETA (17/54): texinfo-6.5-1.fc28.riscv64.rpm 636 kB/s | 1.2 MB 00:01 (18-19/54): perl-Dat 33% [======- ] 2.1 MB/s | 7.2 MB 00:06 ETA (18/54): perl-libintl-perl-1.27-1.fc27.riscv64. 572 kB/s | 862 kB 00:01 (19-20/54): perl-Enc 33% [======- ] 2.1 MB/s | 7.3 MB 00:06 ETA (19/54): perl-Data-Dumper-2.167-408.fc27.0.risc 315 kB/s | 149 kB 00:00 (20-21/54): perl-MIM 34% [======- ] 2.1 MB/s | 7.5 MB 00:06 ETA (20/54): perl-MIME-Base64-3.15-408.fc27.0.riscv 608 kB/s | 111 kB 00:00 (21-22/54): perl-Pat 35% [======= ] 2.1 MB/s | 7.7 MB 00:06 ETA (21/54): perl-PathTools-3.67-408.fc27.0.riscv64 629 kB/s | 166 kB 00:00 (22-23/54): perl-Enc 36% [======= ] 2.1 MB/s | 8.0 MB 00:06 ETA (22/54): perl-Storable-2.62-408.fc27.0.riscv64. 685 kB/s | 205 kB 00:00 (23-24/54): perl-Enc 37% [=======- ] 2.1 MB/s | 8.3 MB 00:06 ETA (23/54): perl-Unicode-Normalize-1.25-408.fc27.0 631 kB/s | 164 kB 00:00 (24-25/54): perl-Enc 39% [=======- ] 2.1 MB/s | 8.5 MB 00:06 ETA (24-26/54): perl-lib 42% [========- ] 2.1 MB/s | 9.4 MB 00:05 ETA (24-26/54): perl-Enc 47% [========= ] 2.2 MB/s | 10 MB 00:05 ETA (24-26/54): perl-Enc 51% [========== ] 2.2 MB/s | 11 MB 00:04 ETA (24/54): perl-Encode-2.94-16.fc27.riscv64.rpm 726 kB/s | 1.4 MB 00:02 (25-26/54): perl-lib 52% [==========- ] 2.1 MB/s | 12 MB 00:04 ETA (25/54): perl-constant-1.33-408.fc27.0.riscv64. 795 kB/s | 79 kB 00:00 (26-27/54): perl-lib 53% [==========- ] 2.1 MB/s | 12 MB 00:04 ETA (26/54): perl-IO-1.38-408.fc28.1.riscv64.riscv6 855 kB/s | 176 kB 00:00 (27-28/54): perl-int 56% [=========== ] 2.1 MB/s | 12 MB 00:04 ETA (27/54): perl-Errno-1.28-408.fc28.1.riscv64.ris 729 kB/s | 73 kB 00:00 (28-29/54): perl-int 57% [=========== ] 2.1 MB/s | 13 MB 00:04 ETA (28/54): perl-File-Path-2.15-1.fc27.noarch.rpm 624 kB/s | 37 kB 00:00 (29-30/54): perl-int 58% [===========- ] 2.1 MB/s | 13 MB 00:04 ETA (29/54): perl-Text-Tabs+Wrap-2013.0523-408.fc27 878 kB/s | 80 kB 00:00 (30-31/54): perl-int 59% [===========- ] 2.1 MB/s | 13 MB 00:04 ETA (30/54): perl-parent-0.236-408.fc27.0.riscv64.n 762 kB/s | 71 kB 00:00 (31-32/54): perl-int 60% [============ ] 2.1 MB/s | 13 MB 00:04 ETA (31/54): perl-Scalar-List-Utils-1.48-1.fc27.ris 777 kB/s | 119 kB 00:00 (32-33/54): perl-int 61% [============ ] 2.1 MB/s | 13 MB 00:03 ETA (32/54): perl-macros-5.26.1-408.fc28.1.riscv64. 689 kB/s | 69 kB 00:00 (33-34/54): perl-int 62% [============- ] 2.1 MB/s | 14 MB 00:03 ETA (33/54): perl-threads-2.21-1.fc27.riscv64.rpm 760 kB/s | 104 kB 00:00 (34-35/54): perl-int 64% [============- ] 2.1 MB/s | 14 MB 00:03 ETA (34/54): perl-threads-shared-1.58-1.fc27.riscv6 812 kB/s | 91 kB 00:00 (35-36/54): perl-lib 65% [============= ] 2.1 MB/s | 14 MB 00:03 ETA (35/54): perl-Socket-2.027-1.fc27.riscv64.rpm 847 kB/s | 95 kB 00:00 (36-37/54): perl-lib 66% [============= ] 2.1 MB/s | 15 MB 00:03 ETA (36/54): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 509 kB/s | 14 kB 00:00 (37-38/54): perl-lib 67% [============= ] 2.1 MB/s | 15 MB 00:03 ETA (37/54): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 352 kB/s | 15 kB 00:00 (38-39/54): perl-lib 67% [============= ] 2.1 MB/s | 15 MB 00:03 ETA (38/54): pkgconf-1.4.1-1.fc27.riscv64.rpm 584 kB/s | 35 kB 00:00 (39-40/54): perl-lib 67% [=============- ] 2.1 MB/s | 15 MB 00:03 ETA (39/54): libpkgconf-1.4.1-1.fc27.riscv64.rpm 752 kB/s | 74 kB 00:00 (40-41/54): perl-lib 69% [=============- ] 2.1 MB/s | 15 MB 00:03 ETA (40-42/54): libcroco 72% [==============- ] 2.1 MB/s | 16 MB 00:02 ETA (40/54): libcroco-0.6.12-4.fc28.riscv64.rpm 811 kB/s | 314 kB 00:00 (41-42/54): perl-lib 73% [==============- ] 2.1 MB/s | 16 MB 00:02 ETA (41/54): perl-Pod-Escapes-1.07-408.fc27.0.riscv 766 kB/s | 77 kB 00:00 (42-43/54): perl-int 74% [==============- ] 2.1 MB/s | 16 MB 00:02 ETA (42/54): perl-Pod-Usage-1.69-408.fc27.0.riscv64 777 kB/s | 89 kB 00:00 (43-44/54): perl-int 75% [=============== ] 2.1 MB/s | 17 MB 00:02 ETA (43/54): perl-Text-ParseWords-3.30-408.fc27.0.r 779 kB/s | 73 kB 00:00 (44-45/54): perl-int 76% [=============== ] 2.1 MB/s | 17 MB 00:02 ETA (44/54): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 848 kB/s | 139 kB 00:00 (45-46/54): perl-int 78% [===============- ] 2.1 MB/s | 17 MB 00:02 ETA (45/54): perl-podlators-4.09-408.fc27.0.riscv64 890 kB/s | 157 kB 00:00 (46-47/54): perl-int 80% [================ ] 2.1 MB/s | 18 MB 00:02 ETA (46/54): perl-File-Temp-0.230.400-408.fc27.0.ri 822 kB/s | 103 kB 00:00 (47-48/54): perl-int 82% [================ ] 2.1 MB/s | 18 MB 00:01 ETA (47/54): perl-libs-5.26.1-408.fc28.1.riscv64.ri 687 kB/s | 3.3 MB 00:04 (48-49/54): perl-HTT 83% [================- ] 1.9 MB/s | 18 MB 00:01 ETA (48/54): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 186 kB/s | 97 kB 00:00 (49/54): perl-interp 83% [================- ] 1.9 MB/s | 18 MB 00:01 ETA (49/54): perl-Time-Local-1.250-394.fc27.noarch. 501 kB/s | 30 kB 00:00 (50-51/54): perl-Ter 84% [================- ] 1.9 MB/s | 18 MB 00:01 ETA (50/54): perl-Term-ANSIColor-4.06-408.fc27.0.ri 637 kB/s | 94 kB 00:00 (51-52/54): perl-Ter 84% [================- ] 1.9 MB/s | 19 MB 00:01 ETA (51/54): perl-Term-Cap-1.17-408.fc27.0.riscv64. 550 kB/s | 78 kB 00:00 (52-53/54): perl-Fil 85% [================= ] 1.9 MB/s | 19 MB 00:01 ETA (52/54): perl-File-ShareDir-1.104-2.fc27.noarch 309 kB/s | 28 kB 00:00 (53-54/54): perl-Cla 85% [================= ] 1.9 MB/s | 19 MB 00:01 ETA (53/54): perl-Class-Inspector-1.32-1.fc27.noarc 529 kB/s | 35 kB 00:00 (54/54): perl-interp 85% [================= ] 1.9 MB/s | 19 MB 00:01 ETA (54/54): perl-interp 89% [=================- ] 1.9 MB/s | 20 MB 00:01 ETA (54/54): perl-interp 93% [==================- ] 2.0 MB/s | 20 MB 00:00 ETA (54/54): perl-interp 96% [=================== ] 2.0 MB/s | 21 MB 00:00 ETA (54/54): perl-interpreter-5.26.1-408.fc28.1.ris 929 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.7 MB/s | 22 MB 00:12 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/54 Installing : perl-Exporter-5.72-408.f [===== ] 1/54 Installing : perl-Exporter-5.72-408.f [======= ] 1/54 Installing : perl-Exporter-5.72-408.f [==================== ] 1/54 Installing : perl-Exporter-5.72-408.f [======================== ] 1/54 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/54 Installing : perl-libs-4:5.26.1-408.f [ ] 2/54 Installing : perl-libs-4:5.26.1-408.f [= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/54 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/54 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/54 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/54 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/54 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/54 Installing : perl-Carp-1.42-408.fc27. [ ] 3/54 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/54 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/54 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/54 Installing : perl-Scalar-List-Utils-3 [ ] 4/54 Installing : perl-Scalar-List-Utils-3 [= ] 4/54 Installing : perl-Scalar-List-Utils-3 [== ] 4/54 Installing : perl-Scalar-List-Utils-3 [=== ] 4/54 Installing : perl-Scalar-List-Utils-3 [===== ] 4/54 Installing : perl-Scalar-List-Utils-3 [======== ] 4/54 Installing : perl-Scalar-List-Utils-3 [========== ] 4/54 Installing : perl-Scalar-List-Utils-3 [============= ] 4/54 Installing : perl-Scalar-List-Utils-3 [================ ] 4/54 Installing : perl-Scalar-List-Utils-3 [================== ] 4/54 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/54 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/54 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/54 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/54 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/54 random: crng init done Installing : perl-Text-ParseWords-3.3 [ ] 5/54 Installing : perl-Text-ParseWords-3.3 [======= ] 5/54 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/54 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/54 Installing : libcroco-0.6.12-4.fc28.r [ ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [=== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [==== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [===== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [====== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [======= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [======== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [========= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [========== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [=========== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [============ ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [============= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [============== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [=============== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [================ ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [================= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [=================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [==================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [===================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [====================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [======================= ] 6/54 Installing : libcroco-0.6.12-4.fc28.r [======================== ] 6/54 Installing : libcroco-0.6.12-4.fc28.riscv64 6/54 Running scriptlet: libcroco-0.6.12-4.fc28.riscv64 6/54 Installing : gettext-libs-0.19.8.1-14 [ ] 7/54 Installing : gettext-libs-0.19.8.1-14 [= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [=== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [==== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [===== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [====== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [======= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [======== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [========= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [========== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [=========== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [============ ] 7/54 Installing : gettext-libs-0.19.8.1-14 [============= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [============== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [=============== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [================ ] 7/54 Installing : gettext-libs-0.19.8.1-14 [================= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [================== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [=================== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [==================== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [===================== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [====================== ] 7/54 Installing : gettext-libs-0.19.8.1-14 [======================= ] 7/54 Installing : gettext-libs-0.19.8.1-14 [======================== ] 7/54 Installing : gettext-libs-0.19.8.1-14.fc28.riscv64 7/54 Installing : gettext-0.19.8.1-14.fc28 [ ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [=== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [==== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [===== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [====== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [======= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [======== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [========= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [========== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [=========== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [============ ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [============= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [============== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [=============== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [================ ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [================= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [=================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [==================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [===================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [====================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [======================= ] 8/54 Installing : gettext-0.19.8.1-14.fc28 [======================== ] 8/54 Installing : gettext-0.19.8.1-14.fc28.riscv64 8/54 Running scriptlet: gettext-0.19.8.1-14.fc28.riscv64 8/54 install-info: No such file or directory for /usr/share/info/gettext.info.gz Installing : perl-Term-ANSIColor-4.06 [ ] 9/54 Installing : perl-Term-ANSIColor-4.06 [==== ] 9/54 Installing : perl-Term-ANSIColor-4.06 [================== ] 9/54 Installing : perl-Term-ANSIColor-4.06 [======================== ] 9/54 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 9/54 Installing : perl-macros-4:5.26.1-408 [ ] 10/54 Installing : perl-macros-4:5.26.1-408 [======================== ] 10/54 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 10/54 Installing : perl-Unicode-Normalize-1 [ ] 11/54 Installing : perl-Unicode-Normalize-1 [= ] 11/54 Installing : perl-Unicode-Normalize-1 [== ] 11/54 Installing : perl-Unicode-Normalize-1 [=== ] 11/54 Installing : perl-Unicode-Normalize-1 [==== ] 11/54 Installing : perl-Unicode-Normalize-1 [===== ] 11/54 Installing : perl-Unicode-Normalize-1 [====== ] 11/54 Installing : perl-Unicode-Normalize-1 [======= ] 11/54 Installing : perl-Unicode-Normalize-1 [======== ] 11/54 Installing : perl-Unicode-Normalize-1 [========= ] 11/54 Installing : perl-Unicode-Normalize-1 [========== ] 11/54 Installing : perl-Unicode-Normalize-1 [============ ] 11/54 Installing : perl-Unicode-Normalize-1 [============= ] 11/54 Installing : perl-Unicode-Normalize-1 [============== ] 11/54 Installing : perl-Unicode-Normalize-1 [=============== ] 11/54 Installing : perl-Unicode-Normalize-1 [================ ] 11/54 Installing : perl-Unicode-Normalize-1 [================= ] 11/54 Installing : perl-Unicode-Normalize-1 [================== ] 11/54 Installing : perl-Unicode-Normalize-1 [=================== ] 11/54 Installing : perl-Unicode-Normalize-1 [==================== ] 11/54 Installing : perl-Unicode-Normalize-1 [===================== ] 11/54 Installing : perl-Unicode-Normalize-1 [====================== ] 11/54 Installing : perl-Unicode-Normalize-1 [======================= ] 11/54 Installing : perl-Unicode-Normalize-1 [======================== ] 11/54 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 11/54 Installing : perl-PathTools-3.67-408. [ ] 12/54 Installing : perl-PathTools-3.67-408. [== ] 12/54 Installing : perl-PathTools-3.67-408. [=== ] 12/54 Installing : perl-PathTools-3.67-408. [==== ] 12/54 Installing : perl-PathTools-3.67-408. [======= ] 12/54 Installing : perl-PathTools-3.67-408. [========= ] 12/54 Installing : perl-PathTools-3.67-408. [=========== ] 12/54 Installing : perl-PathTools-3.67-408. [============== ] 12/54 Installing : perl-PathTools-3.67-408. [================== ] 12/54 Installing : perl-PathTools-3.67-408. [==================== ] 12/54 Installing : perl-PathTools-3.67-408. [===================== ] 12/54 Installing : perl-PathTools-3.67-408. [====================== ] 12/54 Installing : perl-PathTools-3.67-408. [======================= ] 12/54 Installing : perl-PathTools-3.67-408. [======================== ] 12/54 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 12/54 Installing : perl-constant-1.33-408.f [ ] 13/54 Installing : perl-constant-1.33-408.f [======= ] 13/54 Installing : perl-constant-1.33-408.f [======================== ] 13/54 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 13/54 Installing : perl-Errno-1.28-408.fc28 [ ] 14/54 Installing : perl-Errno-1.28-408.fc28 [================= ] 14/54 Installing : perl-Errno-1.28-408.fc28 [======================== ] 14/54 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 14/54 Installing : perl-File-Path-2.15-1.fc [ ] 15/54 Installing : perl-File-Path-2.15-1.fc [==== ] 15/54 Installing : perl-File-Path-2.15-1.fc [======== ] 15/54 Installing : perl-File-Path-2.15-1.fc [==================== ] 15/54 Installing : perl-File-Path-2.15-1.fc [======================== ] 15/54 Installing : perl-File-Path-2.15-1.fc27.noarch 15/54 Installing : perl-Text-Tabs+Wrap-2013 [ ] 16/54 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 16/54 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 16/54 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 16/54 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 16/54 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 16/54 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 16/54 Installing : perl-parent-1:0.236-408. [ ] 17/54 Installing : perl-parent-1:0.236-408. [============ ] 17/54 Installing : perl-parent-1:0.236-408. [======================== ] 17/54 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 17/54 Installing : perl-threads-shared-1.58 [ ] 18/54 Installing : perl-threads-shared-1.58 [=== ] 18/54 Installing : perl-threads-shared-1.58 [======= ] 18/54 Installing : perl-threads-shared-1.58 [========== ] 18/54 Installing : perl-threads-shared-1.58 [============== ] 18/54 Installing : perl-threads-shared-1.58 [================= ] 18/54 Installing : perl-threads-shared-1.58 [==================== ] 18/54 Installing : perl-threads-shared-1.58 [======================= ] 18/54 Installing : perl-threads-shared-1.58 [======================== ] 18/54 Installing : perl-threads-shared-1.58-1.fc27.riscv64 18/54 Installing : perl-threads-1:2.21-1.fc [ ] 19/54 Installing : perl-threads-1:2.21-1.fc [=== ] 19/54 Installing : perl-threads-1:2.21-1.fc [====== ] 19/54 Installing : perl-threads-1:2.21-1.fc [========= ] 19/54 Installing : perl-threads-1:2.21-1.fc [============= ] 19/54 Installing : perl-threads-1:2.21-1.fc [================ ] 19/54 Installing : perl-threads-1:2.21-1.fc [================== ] 19/54 Installing : perl-threads-1:2.21-1.fc [===================== ] 19/54 Installing : perl-threads-1:2.21-1.fc [====================== ] 19/54 Installing : perl-threads-1:2.21-1.fc [======================= ] 19/54 Installing : perl-threads-1:2.21-1.fc [======================== ] 19/54 Installing : perl-threads-1:2.21-1.fc27.riscv64 19/54 Installing : perl-interpreter-4:5.26. [ ] 20/54 Installing : perl-interpreter-4:5.26. [= ] 20/54 Installing : perl-interpreter-4:5.26. [== ] 20/54 Installing : perl-interpreter-4:5.26. [=== ] 20/54 Installing : perl-interpreter-4:5.26. [==== ] 20/54 Installing : perl-interpreter-4:5.26. [===== ] 20/54 Installing : perl-interpreter-4:5.26. [====== ] 20/54 Installing : perl-interpreter-4:5.26. [======= ] 20/54 Installing : perl-interpreter-4:5.26. [======== ] 20/54 Installing : perl-interpreter-4:5.26. [========= ] 20/54 Installing : perl-interpreter-4:5.26. [========== ] 20/54 Installing : perl-interpreter-4:5.26. [=========== ] 20/54 Installing : perl-interpreter-4:5.26. [============ ] 20/54 Installing : perl-interpreter-4:5.26. [============= ] 20/54 Installing : perl-interpreter-4:5.26. [============== ] 20/54 Installing : perl-interpreter-4:5.26. [=============== ] 20/54 Installing : perl-interpreter-4:5.26. [================ ] 20/54 Installing : perl-interpreter-4:5.26. [================= ] 20/54 Installing : perl-interpreter-4:5.26. [================== ] 20/54 Installing : perl-interpreter-4:5.26. [=================== ] 20/54 Installing : perl-interpreter-4:5.26. [==================== ] 20/54 Installing : perl-interpreter-4:5.26. [===================== ] 20/54 Installing : perl-interpreter-4:5.26. [====================== ] 20/54 Installing : perl-interpreter-4:5.26. [======================= ] 20/54 Installing : perl-interpreter-4:5.26. [======================== ] 20/54 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 20/54 Installing : perl-Socket-4:2.027-1.fc [ ] 21/54 Installing : perl-Socket-4:2.027-1.fc [=== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [======= ] 21/54 Installing : perl-Socket-4:2.027-1.fc [========== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [============== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [================= ] 21/54 Installing : perl-Socket-4:2.027-1.fc [==================== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [===================== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [====================== ] 21/54 Installing : perl-Socket-4:2.027-1.fc [======================= ] 21/54 Installing : perl-Socket-4:2.027-1.fc [======================== ] 21/54 Installing : perl-Socket-4:2.027-1.fc27.riscv64 21/54 Installing : perl-IO-1.38-408.fc28.1. [ ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [= ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [=== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [==== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [===== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [====== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [======= ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [======== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [============== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [================= ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 22/54 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 22/54 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 22/54 Installing : perl-Storable-1:2.62-408 [ ] 23/54 Installing : perl-Storable-1:2.62-408 [== ] 23/54 Installing : perl-Storable-1:2.62-408 [==== ] 23/54 Installing : perl-Storable-1:2.62-408 [====== ] 23/54 Installing : perl-Storable-1:2.62-408 [======== ] 23/54 Installing : perl-Storable-1:2.62-408 [========== ] 23/54 Installing : perl-Storable-1:2.62-408 [============ ] 23/54 Installing : perl-Storable-1:2.62-408 [============== ] 23/54 Installing : perl-Storable-1:2.62-408 [================ ] 23/54 Installing : perl-Storable-1:2.62-408 [================== ] 23/54 Installing : perl-Storable-1:2.62-408 [==================== ] 23/54 Installing : perl-Storable-1:2.62-408 [====================== ] 23/54 Installing : perl-Storable-1:2.62-408 [======================== ] 23/54 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 23/54 Installing : perl-MIME-Base64-3.15-40 [ ] 24/54 Installing : perl-MIME-Base64-3.15-40 [= ] 24/54 Installing : perl-MIME-Base64-3.15-40 [== ] 24/54 Installing : perl-MIME-Base64-3.15-40 [========== ] 24/54 Installing : perl-MIME-Base64-3.15-40 [================== ] 24/54 Installing : perl-MIME-Base64-3.15-40 [======================= ] 24/54 Installing : perl-MIME-Base64-3.15-40 [======================== ] 24/54 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 24/54 Installing : perl-Data-Dumper-2.167-4 [ ] 25/54 Installing : perl-Data-Dumper-2.167-4 [=== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [==== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [======== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [============ ] 25/54 Installing : perl-Data-Dumper-2.167-4 [=============== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [=================== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [====================== ] 25/54 Installing : perl-Data-Dumper-2.167-4 [======================= ] 25/54 Installing : perl-Data-Dumper-2.167-4 [======================== ] 25/54 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 25/54 Installing : perl-File-Temp-0.230.400 [ ] 26/54 Installing : perl-File-Temp-0.230.400 [=== ] 26/54 Installing : perl-File-Temp-0.230.400 [============ ] 26/54 Installing : perl-File-Temp-0.230.400 [===================== ] 26/54 Installing : perl-File-Temp-0.230.400 [======================== ] 26/54 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 26/54 Installing : perl-Text-Unidecode-1.30 [ ] 27/54 Installing : perl-Text-Unidecode-1.30 [= ] 27/54 Installing : perl-Text-Unidecode-1.30 [== ] 27/54 Installing : perl-Text-Unidecode-1.30 [=== ] 27/54 Installing : perl-Text-Unidecode-1.30 [==== ] 27/54 Installing : perl-Text-Unidecode-1.30 [===== ] 27/54 Installing : perl-Text-Unidecode-1.30 [====== ] 27/54 Installing : perl-Text-Unidecode-1.30 [======= ] 27/54 Installing : perl-Text-Unidecode-1.30 [======== ] 27/54 Installing : perl-Text-Unidecode-1.30 [========= ] 27/54 Installing : perl-Text-Unidecode-1.30 [========== ] 27/54 Installing : perl-Text-Unidecode-1.30 [=========== ] 27/54 Installing : perl-Text-Unidecode-1.30 [============ ] 27/54 Installing : perl-Text-Unidecode-1.30 [============= ] 27/54 Installing : perl-Text-Unidecode-1.30 [============== ] 27/54 Installing : perl-Text-Unidecode-1.30 [=============== ] 27/54 Installing : perl-Text-Unidecode-1.30 [================ ] 27/54 Installing : perl-Text-Unidecode-1.30 [================= ] 27/54 Installing : perl-Text-Unidecode-1.30 [================== ] 27/54 Installing : perl-Text-Unidecode-1.30 [=================== ] 27/54 Installing : perl-Text-Unidecode-1.30 [==================== ] 27/54 Installing : perl-Text-Unidecode-1.30 [===================== ] 27/54 Installing : perl-Text-Unidecode-1.30 [====================== ] 27/54 Installing : perl-Text-Unidecode-1.30 [======================= ] 27/54 Installing : perl-Text-Unidecode-1.30 [======================== ] 27/54 Installing : perl-Text-Unidecode-1.30-4.fc27.noarch 27/54 Installing : perl-Unicode-EastAsianWi [ ] 28/54 Installing : perl-Unicode-EastAsianWi [=== ] 28/54 Installing : perl-Unicode-EastAsianWi [======== ] 28/54 Installing : perl-Unicode-EastAsianWi [============ ] 28/54 Installing : perl-Unicode-EastAsianWi [======================== ] 28/54 Installing : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 28/54 Installing : perl-Pod-Escapes-1:1.07- [ ] 29/54 Installing : perl-Pod-Escapes-1:1.07- [==== ] 29/54 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 29/54 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/54 Installing : perl-Term-Cap-1.17-408.f [ ] 30/54 Installing : perl-Term-Cap-1.17-408.f [==== ] 30/54 Installing : perl-Term-Cap-1.17-408.f [======================== ] 30/54 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 30/54 Installing : perl-Time-Local-1:1.250- [ ] 31/54 Installing : perl-Time-Local-1:1.250- [= ] 31/54 Installing : perl-Time-Local-1:1.250- [===== ] 31/54 Installing : perl-Time-Local-1:1.250- [======== ] 31/54 Installing : perl-Time-Local-1:1.250- [========= ] 31/54 Installing : perl-Time-Local-1:1.250- [================= ] 31/54 Installing : perl-Time-Local-1:1.250- [=================== ] 31/54 Installing : perl-Time-Local-1:1.250- [======================== ] 31/54 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 31/54 Installing : perl-HTTP-Tiny-0.070-408 [ ] 32/54 Installing : perl-HTTP-Tiny-0.070-408 [== ] 32/54 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 32/54 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 32/54 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 32/54 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 32/54 Installing : perl-Pod-Simple-1:3.35-4 [ ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 33/54 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 33/54 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 33/54 Installing : perl-Encode-4:2.94-16.fc [ ] 34/54 Installing : perl-Encode-4:2.94-16.fc [= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [=== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [==== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [===== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [====== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [======= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [======== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [========= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [========== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [=========== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [============ ] 34/54 Installing : perl-Encode-4:2.94-16.fc [============= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [============== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [=============== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [================ ] 34/54 Installing : perl-Encode-4:2.94-16.fc [================= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [=================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [==================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [===================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [====================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc [======================= ] 34/54 Installing : perl-Encode-4:2.94-16.fc [======================== ] 34/54 Installing : perl-Encode-4:2.94-16.fc27.riscv64 34/54 Installing : perl-Getopt-Long-1:2.50- [ ] 35/54 Installing : perl-Getopt-Long-1:2.50- [=== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [==== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [===== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [====== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [======= ] 35/54 Installing : perl-Getopt-Long-1:2.50- [========= ] 35/54 Installing : perl-Getopt-Long-1:2.50- [=============== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [===================== ] 35/54 Installing : perl-Getopt-Long-1:2.50- [======================== ] 35/54 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 35/54 Installing : perl-Pod-Usage-4:1.69-40 [ ] 36/54 Installing : perl-Pod-Usage-4:1.69-40 [== ] 36/54 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 36/54 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 36/54 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 36/54 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 36/54 Installing : perl-podlators-4.09-408. [ ] 37/54 Installing : perl-podlators-4.09-408. [= ] 37/54 Installing : perl-podlators-4.09-408. [== ] 37/54 Installing : perl-podlators-4.09-408. [=== ] 37/54 Installing : perl-podlators-4.09-408. [==== ] 37/54 Installing : perl-podlators-4.09-408. [===== ] 37/54 Installing : perl-podlators-4.09-408. [====== ] 37/54 Installing : perl-podlators-4.09-408. [======= ] 37/54 Installing : perl-podlators-4.09-408. [=========== ] 37/54 Installing : perl-podlators-4.09-408. [=============== ] 37/54 Installing : perl-podlators-4.09-408. [================ ] 37/54 Installing : perl-podlators-4.09-408. [================= ] 37/54 Installing : perl-podlators-4.09-408. [===================== ] 37/54 Installing : perl-podlators-4.09-408. [====================== ] 37/54 Installing : perl-podlators-4.09-408. [======================= ] 37/54 Installing : perl-podlators-4.09-408. [======================== ] 37/54 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 37/54 Installing : perl-Pod-Perldoc-3.28-40 [ ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [= ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 38/54 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 38/54 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 38/54 Installing : perl-libintl-perl-1.27-1 [ ] 39/54 Installing : perl-libintl-perl-1.27-1 [= ] 39/54 Installing : perl-libintl-perl-1.27-1 [== ] 39/54 Installing : perl-libintl-perl-1.27-1 [=== ] 39/54 Installing : perl-libintl-perl-1.27-1 [==== ] 39/54 Installing : perl-libintl-perl-1.27-1 [===== ] 39/54 Installing : perl-libintl-perl-1.27-1 [====== ] 39/54 Installing : perl-libintl-perl-1.27-1 [======= ] 39/54 Installing : perl-libintl-perl-1.27-1 [======== ] 39/54 Installing : perl-libintl-perl-1.27-1 [========= ] 39/54 Installing : perl-libintl-perl-1.27-1 [========== ] 39/54 Installing : perl-libintl-perl-1.27-1 [=========== ] 39/54 Installing : perl-libintl-perl-1.27-1 [============ ] 39/54 Installing : perl-libintl-perl-1.27-1 [============= ] 39/54 Installing : perl-libintl-perl-1.27-1 [============== ] 39/54 Installing : perl-libintl-perl-1.27-1 [=============== ] 39/54 Installing : perl-libintl-perl-1.27-1 [================ ] 39/54 Installing : perl-libintl-perl-1.27-1 [================= ] 39/54 Installing : perl-libintl-perl-1.27-1 [================== ] 39/54 Installing : perl-libintl-perl-1.27-1 [=================== ] 39/54 Installing : perl-libintl-perl-1.27-1 [==================== ] 39/54 Installing : perl-libintl-perl-1.27-1 [===================== ] 39/54 Installing : perl-libintl-perl-1.27-1 [====================== ] 39/54 Installing : perl-libintl-perl-1.27-1 [======================= ] 39/54 Installing : perl-libintl-perl-1.27-1 [======================== ] 39/54 Installing : perl-libintl-perl-1.27-1.fc27.riscv64 39/54 Installing : perl-Class-Inspector-1.3 [ ] 40/54 Installing : perl-Class-Inspector-1.3 [== ] 40/54 Installing : perl-Class-Inspector-1.3 [===== ] 40/54 Installing : perl-Class-Inspector-1.3 [============= ] 40/54 Installing : perl-Class-Inspector-1.3 [=============== ] 40/54 Installing : perl-Class-Inspector-1.3 [================ ] 40/54 Installing : perl-Class-Inspector-1.3 [======================= ] 40/54 Installing : perl-Class-Inspector-1.3 [======================== ] 40/54 Installing : perl-Class-Inspector-1.32-1.fc27.noarch 40/54 Installing : libpkgconf-1.4.1-1.fc27. [ ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 41/54 Installing : libpkgconf-1.4.1-1.fc27.riscv64 41/54 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 41/54 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 42/54 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 42/54 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 42/54 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 42/54 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 42/54 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 42/54 Installing : pkgconf-1.4.1-1.fc27.riscv64 42/54 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 43/54 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 43/54 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 43/54 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 43/54 Installing : pkgconf-pkg-config-1.4.1 [ ] 44/54 Installing : pkgconf-pkg-config-1.4.1 [==== ] 44/54 Installing : pkgconf-pkg-config-1.4.1 [===== ] 44/54 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 44/54 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 44/54 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 44/54 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 45/54 Installing : xz-5.2.3-5.fc28.riscv64 45/54 Installing : ncurses-c++-libs-6.1-2.2 [ ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [=== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [==== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [===== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [====== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [======= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [======== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [========= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [========== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [=========== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [============ ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [============= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [============== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [=============== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [================ ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [================= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [=================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [==================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [===================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [====================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [======================= ] 46/54 Installing : ncurses-c++-libs-6.1-2.2 [======================== ] 46/54 Installing : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 46/54 Installing : file-5.32-3.fc28.riscv64 [ ] 47/54 Installing : file-5.32-3.fc28.riscv64 [====== ] 47/54 Installing : file-5.32-3.fc28.riscv64 [=========== ] 47/54 Installing : file-5.32-3.fc28.riscv64 [================== ] 47/54 Installing : file-5.32-3.fc28.riscv64 [===================== ] 47/54 Installing : file-5.32-3.fc28.riscv64 [====================== ] 47/54 Installing : file-5.32-3.fc28.riscv64 [======================= ] 47/54 Installing : file-5.32-3.fc28.riscv64 [======================== ] 47/54 Installing : file-5.32-3.fc28.riscv64 47/54 Installing : gettext-common-devel-0.1 [ ] 48/54 Installing : gettext-common-devel-0.1 [== ] 48/54 Installing : gettext-common-devel-0.1 [==== ] 48/54 Installing : gettext-common-devel-0.1 [====== ] 48/54 Installing : gettext-common-devel-0.1 [======== ] 48/54 Installing : gettext-common-devel-0.1 [========== ] 48/54 Installing : gettext-common-devel-0.1 [============ ] 48/54 Installing : gettext-common-devel-0.1 [============== ] 48/54 Installing : gettext-common-devel-0.1 [================ ] 48/54 Installing : gettext-common-devel-0.1 [================== ] 48/54 Installing : gettext-common-devel-0.1 [==================== ] 48/54 Installing : gettext-common-devel-0.1 [====================== ] 48/54 Installing : gettext-common-devel-0.1 [======================== ] 48/54 Installing : gettext-common-devel-0.19.8.1-14.fc28.noarch 48/54 Installing : gettext-devel-0.19.8.1-1 [ ] 49/54 Installing : gettext-devel-0.19.8.1-1 [= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [=== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [==== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [===== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [====== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [======= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [======== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [========= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [========== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [=========== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [============ ] 49/54 Installing : gettext-devel-0.19.8.1-1 [============= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [============== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [=============== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [================ ] 49/54 Installing : gettext-devel-0.19.8.1-1 [================= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [================== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [=================== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [==================== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [===================== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [====================== ] 49/54 Installing : gettext-devel-0.19.8.1-1 [======================= ] 49/54 Installing : gettext-devel-0.19.8.1-1 [======================== ] 49/54 Installing : gettext-devel-0.19.8.1-14.fc28.riscv64 49/54 Running scriptlet: gettext-devel-0.19.8.1-14.fc28.riscv64 49/54 install-info: No such file or directory for /usr/share/info/autosprintf.info Installing : file-devel-5.32-3.fc28.r [ ] 50/54 Installing : file-devel-5.32-3.fc28.r [============== ] 50/54 Installing : file-devel-5.32-3.fc28.r [======================== ] 50/54 Installing : file-devel-5.32-3.fc28.riscv64 50/54 Installing : ncurses-devel-6.1-2.2018 [ ] 51/54 Installing : ncurses-devel-6.1-2.2018 [= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [=== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [==== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [===== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [====== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [======= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [======== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [========= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [========== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [=========== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [============ ] 51/54 Installing : ncurses-devel-6.1-2.2018 [============= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [============== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [=============== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [================ ] 51/54 Installing : ncurses-devel-6.1-2.2018 [================= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [================== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [=================== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [==================== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [===================== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [====================== ] 51/54 Installing : ncurses-devel-6.1-2.2018 [======================= ] 51/54 Installing : ncurses-devel-6.1-2.2018 [======================== ] 51/54 Installing : ncurses-devel-6.1-2.20180129.fc27.riscv64 51/54 Installing : perl-File-ShareDir-1.104 [ ] 52/54 Installing : perl-File-ShareDir-1.104 [= ] 52/54 Installing : perl-File-ShareDir-1.104 [==== ] 52/54 Installing : perl-File-ShareDir-1.104 [===== ] 52/54 Installing : perl-File-ShareDir-1.104 [============== ] 52/54 Installing : perl-File-ShareDir-1.104 [================ ] 52/54 Installing : perl-File-ShareDir-1.104 [======================= ] 52/54 Installing : perl-File-ShareDir-1.104 [======================== ] 52/54 Installing : perl-File-ShareDir-1.104-2.fc27.noarch 52/54 Installing : texinfo-6.5-1.fc28.riscv [ ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [=== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [==== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [===== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [====== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [======= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [======== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [========= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [========== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [=========== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [============ ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [============= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [============== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [=============== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [================ ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [================= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [=================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [==================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [===================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [====================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [======================= ] 53/54 Installing : texinfo-6.5-1.fc28.riscv [======================== ] 53/54 Installing : texinfo-6.5-1.fc28.riscv64 53/54 Running scriptlet: texinfo-6.5-1.fc28.riscv64 53/54 Installing : groff-1.22.3-8.fc27.risc [ ] 54/54 Installing : groff-1.22.3-8.fc27.risc [= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [=== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [==== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [===== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [====== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [======= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [======== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [========= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [========== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [=========== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [============ ] 54/54 Installing : groff-1.22.3-8.fc27.risc [============= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [============== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [=============== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [================ ] 54/54 Installing : groff-1.22.3-8.fc27.risc [================= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [================== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [=================== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [==================== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [===================== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [====================== ] 54/54 Installing : groff-1.22.3-8.fc27.risc [======================= ] 54/54 Installing : groff-1.22.3-8.fc27.risc [======================== ] 54/54 Installing : groff-1.22.3-8.fc27.riscv64 54/54 Running scriptlet: groff-1.22.3-8.fc27.riscv64 54/54 Verifying : gettext-devel-0.19.8.1-14.fc28.riscv64 1/54 Verifying : groff-1.22.3-8.fc27.riscv64 2/54 Verifying : gettext-0.19.8.1-14.fc28.riscv64 3/54 Verifying : gettext-common-devel-0.19.8.1-14.fc28.noarch 4/54 Verifying : gettext-libs-0.19.8.1-14.fc28.riscv64 5/54 Verifying : file-devel-5.32-3.fc28.riscv64 6/54 Verifying : file-5.32-3.fc28.riscv64 7/54 Verifying : ncurses-devel-6.1-2.20180129.fc27.riscv64 8/54 Verifying : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 9/54 Verifying : texinfo-6.5-1.fc28.riscv64 10/54 Verifying : perl-Text-Unidecode-1.30-4.fc27.noarch 11/54 Verifying : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 12/54 Verifying : perl-libintl-perl-1.27-1.fc27.riscv64 13/54 Verifying : xz-5.2.3-5.fc28.riscv64 14/54 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 15/54 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 16/54 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 17/54 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 18/54 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 19/54 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 20/54 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 21/54 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 22/54 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 23/54 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 24/54 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 25/54 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 26/54 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 27/54 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 28/54 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 29/54 Verifying : perl-File-Path-2.15-1.fc27.noarch 30/54 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 31/54 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 32/54 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 33/54 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 34/54 Verifying : perl-threads-1:2.21-1.fc27.riscv64 35/54 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 36/54 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 37/54 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 38/54 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 39/54 Verifying : pkgconf-1.4.1-1.fc27.riscv64 40/54 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 41/54 Verifying : libcroco-0.6.12-4.fc28.riscv64 42/54 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 43/54 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 44/54 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 45/54 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 46/54 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 47/54 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 48/54 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 49/54 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 50/54 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 51/54 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 52/54 Verifying : perl-File-ShareDir-1.104-2.fc27.noarch 53/54 Verifying : perl-Class-Inspector-1.32-1.fc27.noarch 54/54 Installed: file-devel.riscv64 5.32-3.fc28 gettext-devel.riscv64 0.19.8.1-14.fc28 groff.riscv64 1.22.3-8.fc27 ncurses-devel.riscv64 6.1-2.20180129.fc27 texinfo.riscv64 6.5-1.fc28 perl-File-ShareDir.noarch 1.104-2.fc27 file.riscv64 5.32-3.fc28 gettext.riscv64 0.19.8.1-14.fc28 gettext-common-devel.noarch 0.19.8.1-14.fc28 gettext-libs.riscv64 0.19.8.1-14.fc28 libcroco.riscv64 0.6.12-4.fc28 libpkgconf.riscv64 1.4.1-1.fc27 ncurses-c++-libs.riscv64 6.1-2.20180129.fc27 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Class-Inspector.noarch 1.32-1.fc27 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Text-Unidecode.noarch 1.30-4.fc27 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-EastAsianWidth.noarch 1.33-11.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libintl-perl.riscv64 1.27-1.fc27 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 xz.riscv64 5.2.3-5.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:00:02 ago on Thu Feb 22 11:20:04 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:00:24 ago on Thu Feb 22 11:20:04 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group bash redhat-rpm-config which gawk sed grep rpm-build cpio tar fedora-release unzip coreutils make xz util-linux gzip findutils patch diffutils info shadow-utils bzip2 ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 25 Packages Total download size: 12 M Installed size: 49 M Downloading Packages: (1/25): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/25): make-4.2.1 6% [= ] 2.4 MB/s | 751 kB 00:04 ETA (1/25): make-4.2.1-6.fc27.riscv64.rpm 877 kB/s | 486 kB 00:00 (2-3/25): diffutils- 11% [== ] 2.4 MB/s | 1.4 MB 00:04 ETA (2/25): redhat-rpm-config-96-1.fc28.0.riscv64.n 801 kB/s | 75 kB 00:00 (3-4/25): diffutils- 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (3/25): diffutils-3.6-3.fc28.riscv64.rpm 710 kB/s | 577 kB 00:00 (4-5/25): nim-srpm-m 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (4/25): nim-srpm-macros-1-1.fc28.noarch.rpm 70 kB/s | 7.6 kB 00:00 (5/25): tar-1.29-7.f 13% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (5/25): ocaml-srpm-macros-5-2.fc27.noarch.rpm 175 kB/s | 7.8 kB 00:00 (6-7/25): openblas-s 14% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (6/25): openblas-srpm-macros-2-2.fc27.noarch.rp 155 kB/s | 6.6 kB 00:00 (7/25): tar-1.29-7.f 14% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (7/25): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 200 kB/s | 9.0 kB 00:00 (8-9/25): rust-srpm- 14% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (8/25): rust-srpm-macros-5-1.fc28.noarch.rpm 177 kB/s | 8.0 kB 00:00 (9/25): tar-1.29-7.f 14% [==- ] 2.3 MB/s | 1.8 MB 00:04 ETA (9/25): tar-1.29-7.fc27.riscv64.rpm 583 kB/s | 805 kB 00:01 (10-11/25): rpm-buil 18% [===- ] 2.3 MB/s | 2.3 MB 00:04 ETA (10/25): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 555 kB/s | 235 kB 00:00 (11-12/25): zstd-1.3 20% [==== ] 2.2 MB/s | 2.4 MB 00:04 ETA (11/25): which-2.21-4.fc28.riscv64.rpm 367 kB/s | 65 kB 00:00 (12-13/25): zstd-1.3 20% [==== ] 2.2 MB/s | 2.5 MB 00:04 ETA (12/25): patch-2.7.5-6.fc27.riscv64.rpm 755 kB/s | 270 kB 00:00 (13-14/25): zstd-1.3 26% [===== ] 2.2 MB/s | 3.2 MB 00:04 ETA (13/25): bzip2-1.0.6-24.fc28.riscv64.rpm 730 kB/s | 81 kB 00:00 (14-15/25): zstd-1.3 28% [=====- ] 2.2 MB/s | 3.5 MB 00:03 ETA (14/25): unzip-6.0-36.fc28.riscv64.rpm 711 kB/s | 398 kB 00:00 (15-16/25): zstd-1.3 30% [====== ] 2.2 MB/s | 3.7 MB 00:03 ETA (15-17/25): elfutils 36% [======= ] 2.2 MB/s | 4.4 MB 00:03 ETA (15/25): zstd-1.3.3-1.fc27.riscv64.rpm 662 kB/s | 1.1 MB 00:01 (16-17/25): binutils 41% [======== ] 2.2 MB/s | 5.1 MB 00:03 ETA (16/25): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 278 kB/s | 7.5 kB 00:00 (17-18/25): binutils 42% [======== ] 2.2 MB/s | 5.2 MB 00:03 ETA (17/25): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 328 kB/s | 8.2 kB 00:00 (18-19/25): binutils 42% [========- ] 2.1 MB/s | 5.2 MB 00:03 ETA (18/25): gnat-srpm-macros-4-5.fc28.noarch.rpm 339 kB/s | 8.8 kB 00:00 (19-20/25): binutils 42% [========- ] 2.1 MB/s | 5.2 MB 00:03 ETA (19/25): go-srpm-macros-2-11.fc28.noarch.rpm 338 kB/s | 8.4 kB 00:00 (20-21/25): binutils 43% [========- ] 2.1 MB/s | 5.3 MB 00:03 ETA (20/25): perl-srpm-macros-1-26.fc28.noarch.rpm 328 kB/s | 9.7 kB 00:00 (21-22/25): binutils 43% [========- ] 2.1 MB/s | 5.3 MB 00:03 ETA (21/25): python-srpm-macros-3-26.fc28.noarch.rp 315 kB/s | 10 kB 00:00 (22-23/25): binutils 43% [========- ] 2.1 MB/s | 5.4 MB 00:03 ETA (22/25): dwz-0.12-5.fc28.riscv64.rpm 825 kB/s | 108 kB 00:00 (23-24/25): elfutils 46% [========= ] 2.1 MB/s | 5.7 MB 00:03 ETA (23/25): elfutils-0.170-4.fc28.riscv64.rpm 555 kB/s | 791 kB 00:01 (24-25/25): binutils 47% [========= ] 2.0 MB/s | 5.8 MB 00:03 ETA (24/25): zip-3.0-20.fc28.riscv64.rpm 835 kB/s | 271 kB 00:00 (25/25): binutils-2. 51% [========== ] 2.1 MB/s | 6.2 MB 00:02 ETA (25/25): binutils-2. 58% [===========- ] 2.1 MB/s | 7.1 MB 00:02 ETA (25/25): binutils-2. 64% [============- ] 2.1 MB/s | 7.9 MB 00:02 ETA (25/25): binutils-2. 71% [============== ] 2.2 MB/s | 8.8 MB 00:01 ETA (25/25): binutils-2. 78% [===============- ] 2.2 MB/s | 9.6 MB 00:01 ETA (25/25): binutils-2. 85% [================= ] 2.3 MB/s | 10 MB 00:00 ETA (25/25): binutils-2. 92% [================== ] 2.3 MB/s | 11 MB 00:00 ETA (25/25): binutils-2. 99% [===================-] 2.3 MB/s | 12 MB 00:00 ETA (25/25): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [== ] 1/1 Preparing : [==== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : unzip-6.0-36.fc28.riscv6 [ ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 1/25 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 1/25 Installing : unzip-6.0-36.fc28.riscv64 1/25 Installing : zip-3.0-20.fc28.riscv64 [ ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [=== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [==== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [===== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [====== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [======= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [======== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [========= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [========== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [============ ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [============= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [============== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [================ ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [================= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 2/25 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 2/25 Installing : zip-3.0-20.fc28.riscv64 2/25 Installing : dwz-0.12-5.fc28.riscv64 [ ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 3/25 Installing : dwz-0.12-5.fc28.riscv64 3/25 Installing : python-srpm-macros-3-26. [ ] 4/25 Installing : python-srpm-macros-3-26. [======================= ] 4/25 Installing : python-srpm-macros-3-26.fc28.noarch 4/25 Installing : perl-srpm-macros-1-26.fc [ ] 5/25 Installing : perl-srpm-macros-1-26.fc [====================== ] 5/25 Installing : perl-srpm-macros-1-26.fc28.noarch 5/25 Installing : go-srpm-macros-2-11.fc28 [ ] 6/25 Installing : go-srpm-macros-2-11.fc28 [====================== ] 6/25 Installing : go-srpm-macros-2-11.fc28.noarch 6/25 Installing : gnat-srpm-macros-4-5.fc2 [ ] 7/25 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 7/25 Installing : gnat-srpm-macros-4-5.fc28.noarch 7/25 Installing : ghc-srpm-macros-1.4.2-7. [ ] 8/25 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 8/25 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 8/25 Installing : fpc-srpm-macros-1.1-4.fc [ ] 9/25 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 9/25 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 9/25 Installing : binutils-2.30-1.fc28.ris [ ] 10/25 Installing : binutils-2.30-1.fc28.ris [= ] 10/25 Installing : binutils-2.30-1.fc28.ris [== ] 10/25 Installing : binutils-2.30-1.fc28.ris [=== ] 10/25 Installing : binutils-2.30-1.fc28.ris [==== ] 10/25 Installing : binutils-2.30-1.fc28.ris [===== ] 10/25 Installing : binutils-2.30-1.fc28.ris [====== ] 10/25 Installing : binutils-2.30-1.fc28.ris [======= ] 10/25 Installing : binutils-2.30-1.fc28.ris [======== ] 10/25 Installing : binutils-2.30-1.fc28.ris [========= ] 10/25 Installing : binutils-2.30-1.fc28.ris [========== ] 10/25 Installing : binutils-2.30-1.fc28.ris [=========== ] 10/25 Installing : binutils-2.30-1.fc28.ris [============ ] 10/25 Installing : binutils-2.30-1.fc28.ris [============= ] 10/25 Installing : binutils-2.30-1.fc28.ris [============== ] 10/25 Installing : binutils-2.30-1.fc28.ris [=============== ] 10/25 Installing : binutils-2.30-1.fc28.ris [================ ] 10/25 Installing : binutils-2.30-1.fc28.ris [================= ] 10/25 Installing : binutils-2.30-1.fc28.ris [================== ] 10/25 Installing : binutils-2.30-1.fc28.ris [=================== ] 10/25 Installing : binutils-2.30-1.fc28.ris [==================== ] 10/25 Installing : binutils-2.30-1.fc28.ris [===================== ] 10/25 Installing : binutils-2.30-1.fc28.ris [====================== ] 10/25 Installing : binutils-2.30-1.fc28.ris [======================= ] 10/25 Installing : binutils-2.30-1.fc28.ris [======================== ] 10/25 Installing : binutils-2.30-1.fc28.riscv64 10/25 Running scriptlet: binutils-2.30-1.fc28.riscv64 10/25 Installing : elfutils-0.170-4.fc28.ri [ ] 11/25 Installing : elfutils-0.170-4.fc28.ri [= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [=== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [==== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [===== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [====== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [======= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [======== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [========= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [========== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [=========== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [============ ] 11/25 Installing : elfutils-0.170-4.fc28.ri [============= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [============== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [=============== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [================ ] 11/25 Installing : elfutils-0.170-4.fc28.ri [================= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [================== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [=================== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [==================== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [===================== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [====================== ] 11/25 Installing : elfutils-0.170-4.fc28.ri [======================= ] 11/25 Installing : elfutils-0.170-4.fc28.ri [======================== ] 11/25 Installing : elfutils-0.170-4.fc28.riscv64 11/25 Installing : bzip2-1.0.6-24.fc28.risc [ ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 12/25 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 12/25 Installing : bzip2-1.0.6-24.fc28.riscv64 12/25 Installing : patch-2.7.5-6.fc27.riscv [ ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [=== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [==== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [===== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [====== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [======= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [======== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [========= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [========== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [============ ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [============= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [============== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [================ ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [================= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 13/25 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 13/25 Installing : patch-2.7.5-6.fc27.riscv64 13/25 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 14/25 Installing : zstd-1.3.3-1.fc27.riscv64 14/25 Installing : rust-srpm-macros-5-1.fc2 [ ] 15/25 Installing : rust-srpm-macros-5-1.fc2 [=== ] 15/25 Installing : rust-srpm-macros-5-1.fc2 [===== ] 15/25 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 15/25 Installing : rust-srpm-macros-5-1.fc28.noarch 15/25 Installing : qt5-srpm-macros-5.10.0-1 [ ] 16/25 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 16/25 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 16/25 Installing : openblas-srpm-macros-2-2 [ ] 17/25 Installing : openblas-srpm-macros-2-2 [================ ] 17/25 Installing : openblas-srpm-macros-2-2.fc27.noarch 17/25 Installing : ocaml-srpm-macros-5-2.fc [ ] 18/25 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 18/25 Installing : ocaml-srpm-macros-5-2.fc27.noarch 18/25 Installing : nim-srpm-macros-1-1.fc28 [ ] 19/25 Installing : nim-srpm-macros-1-1.fc28 [=== ] 19/25 Installing : nim-srpm-macros-1-1.fc28 [===== ] 19/25 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 19/25 Installing : nim-srpm-macros-1-1.fc28.noarch 19/25 Installing : redhat-rpm-config-96-1.f [ ] 20/25 Installing : redhat-rpm-config-96-1.f [== ] 20/25 Installing : redhat-rpm-config-96-1.f [=== ] 20/25 Installing : redhat-rpm-config-96-1.f [========= ] 20/25 Installing : redhat-rpm-config-96-1.f [=========== ] 20/25 Installing : redhat-rpm-config-96-1.f [================= ] 20/25 Installing : redhat-rpm-config-96-1.f [================== ] 20/25 Installing : redhat-rpm-config-96-1.f [=================== ] 20/25 Installing : redhat-rpm-config-96-1.f [===================== ] 20/25 Installing : redhat-rpm-config-96-1.f [====================== ] 20/25 Installing : redhat-rpm-config-96-1.f [======================== ] 20/25 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 20/25 Installing : diffutils-3.6-3.fc28.ris [ ] 21/25 Installing : diffutils-3.6-3.fc28.ris [= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [=== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [==== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [===== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [====== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [======= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [======== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [========= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [========== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [=========== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [============ ] 21/25 Installing : diffutils-3.6-3.fc28.ris [============= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [============== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [=============== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [================ ] 21/25 Installing : diffutils-3.6-3.fc28.ris [================= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [================== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [=================== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [==================== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [===================== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [====================== ] 21/25 Installing : diffutils-3.6-3.fc28.ris [======================= ] 21/25 Installing : diffutils-3.6-3.fc28.ris [======================== ] 21/25 Installing : diffutils-3.6-3.fc28.riscv64 21/25 Running scriptlet: diffutils-3.6-3.fc28.riscv64 21/25 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 22/25 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 22/25 Installing : tar-2:1.29-7.fc27.riscv64 22/25 Running scriptlet: tar-2:1.29-7.fc27.riscv64 22/25 Installing : rpm-build-4.14.1-6.fc28. [ ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [= ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [=== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [==== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [===== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [====== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [======= ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [======== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [========= ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [============ ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [============== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [================ ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [================= ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 23/25 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 23/25 Installing : which-2.21-4.fc28.riscv6 [ ] 24/25 Installing : which-2.21-4.fc28.riscv6 [===== ] 24/25 Installing : which-2.21-4.fc28.riscv6 [=========== ] 24/25 Installing : which-2.21-4.fc28.riscv6 [=============== ] 24/25 Installing : which-2.21-4.fc28.riscv6 [================ ] 24/25 Installing : which-2.21-4.fc28.riscv6 [================= ] 24/25 Installing : which-2.21-4.fc28.riscv6 [================== ] 24/25 Installing : which-2.21-4.fc28.riscv6 [======================== ] 24/25 Installing : which-2.21-4.fc28.riscv64 24/25 Running scriptlet: which-2.21-4.fc28.riscv64 24/25 Installing : make-1:4.2.1-6.fc27.risc [ ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [=== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [==== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [===== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [====== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [======= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [======== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [========= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [========== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [============ ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [============= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [============== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [================ ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [================= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [================== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 25/25 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 25/25 Installing : make-1:4.2.1-6.fc27.riscv64 25/25 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 25/25 Verifying : tar-2:1.29-7.fc27.riscv64 1/25 Verifying : diffutils-3.6-3.fc28.riscv64 2/25 Verifying : make-1:4.2.1-6.fc27.riscv64 3/25 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/25 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/25 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/25 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/25 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/25 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/25 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/25 Verifying : zstd-1.3.3-1.fc27.riscv64 11/25 Verifying : which-2.21-4.fc28.riscv64 12/25 Verifying : patch-2.7.5-6.fc27.riscv64 13/25 Verifying : unzip-6.0-36.fc28.riscv64 14/25 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/25 Verifying : elfutils-0.170-4.fc28.riscv64 16/25 Verifying : binutils-2.30-1.fc28.riscv64 17/25 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 18/25 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 19/25 Verifying : gnat-srpm-macros-4-5.fc28.noarch 20/25 Verifying : go-srpm-macros-2-11.fc28.noarch 21/25 Verifying : perl-srpm-macros-1-26.fc28.noarch 22/25 Verifying : python-srpm-macros-3-26.fc28.noarch 23/25 Verifying : dwz-0.12-5.fc28.riscv64 24/25 Verifying : zip-3.0-20.fc28.riscv64 25/25 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:02:19 ago on Thu Feb 22 11:20:04 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 546 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 574 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-devel 34% [======- ] 705 kB/s | 878 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 771 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 765 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 87% [================= ] 898 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 912 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 908 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 930 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.8 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off