OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 11:14:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/nano.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GZ7uN1 + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf nano-2.6.1 + /usr/bin/gzip -dc /builddir/build/SOURCES/nano-2.6.1.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd nano-2.6.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #1 (0001-fix-compile-time-warnings-in-nano-2.3.3.patch):' Patch #1 (0001-fix-compile-time-warnings-in-nano-2.3.3.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file po/Makefile.in.in + echo 'Patch #2 (0002-use-futimens-if-available-instead-of-utime.patch):' Patch #2 (0002-use-futimens-if-available-instead-of-utime.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file config.h.in patching file configure patching file configure.ac patching file src/files.c + for f in doc/man/fr/{nano.1,nanorc.5,rnano.1} + iconv -f iso-8859-1 -t utf-8 -o doc/man/fr/nano.1.tmp doc/man/fr/nano.1 + mv doc/man/fr/nano.1.tmp doc/man/fr/nano.1 + touch doc/man/fr/nano.1.html + for f in doc/man/fr/{nano.1,nanorc.5,rnano.1} + iconv -f iso-8859-1 -t utf-8 -o doc/man/fr/nanorc.5.tmp doc/man/fr/nanorc.5 + mv doc/man/fr/nanorc.5.tmp doc/man/fr/nanorc.5 + touch doc/man/fr/nanorc.5.html + for f in doc/man/fr/{nano.1,nanorc.5,rnano.1} + iconv -f iso-8859-1 -t utf-8 -o doc/man/fr/rnano.1.tmp doc/man/fr/rnano.1 + mv doc/man/fr/rnano.1.tmp doc/man/fr/rnano.1 + touch doc/man/fr/rnano.1.html + touch -c aclocal.m4 config.h.in configure Makefile.in + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.wIVNh7 + umask 022 + cd /builddir/build/BUILD + cd nano-2.6.1 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for riscv64-redhat-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking whether ln -s works... yes checking for strerror in -lcposix... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for riscv64-redhat-linux-gnu-pkg-config... /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking whether NLS is requested... yes checking for GNU gettext in libc... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking whether to enable UTF-8 support... auto checking whether to use slang... no checking for futimens... yes checking for getdelim... yes checking for getline... yes checking for isblank... yes checking for strcasecmp... yes checking for strcasestr... yes checking for strncasecmp... yes checking for strnlen... yes checking for snprintf... yes checking for vsnprintf... yes checking for iswalnum... yes checking for iswblank... yes checking for iswpunct... yes checking for iswspace... yes checking for nl_langinfo... yes checking for mblen... yes checking for mbstowcs... yes checking for mbtowc... yes checking for wctomb... yes checking for wcwidth... yes checking whether C compiler accepts -Wall... yes checking return type of signal handlers... void checking for vprintf... yes checking for _doprnt... no checking for getopt_long... yes checking for NCURSESW... yes Using ncursesw as the curses library checking for use_default_colors in -lncursesw... yes checking for key_defined in -lncursesw... yes checking for enhanced regular expression flag... REG_EXTENDED checking for GNU-style word boundary regex support... yes checking whether _XOPEN_SOURCE_EXTENDED is needed... random: crng init done no checking whether LINES and COLS can be redefined... yes checking magic.h usability... yes checking magic.h presence... yes checking for magic.h... yes checking for magic_open in -lmagic... yes checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for inflate in -lz... no checking for HTML support in groff... yes checking for makeinfo... yes checking whether building from git... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating doc/nanorc.sample config.status: creating doc/man/Makefile config.status: creating doc/man/fr/Makefile config.status: creating doc/syntax/Makefile config.status: creating doc/texinfo/Makefile config.status: creating m4/Makefile config.status: creating po/Makefile.in config.status: creating src/Makefile config.status: creating nano.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile + make -j2 make all-recursive make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1' Making all in doc make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc' Making all in man make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make all-recursive make[4]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' Making all in fr make[5]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make all-am make[6]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[6]: Nothing to be done for 'all-am'. make[6]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[5]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[5]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[5]: Nothing to be done for 'all-am'. make[5]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[4]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' Making all in texinfo make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make all-am make[4]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' Making all in syntax make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc' Making all in m4 make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/m4' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/m4' Making all in po make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/po' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/po' Making all in src make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/src' gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o browser.o browser.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o chars.o chars.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o color.o color.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o cut.o cut.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o files.o files.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o global.o global.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o help.o help.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o move.o move.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o nano.o nano.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o prompt.o prompt.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o rcfile.o rcfile.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o search.o search.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o text.o text.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o utils.o utils.c gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\"/usr/share/locale\" -DSYSCONFDIR=\"/etc\" -D_GNU_SOURCE -D_DEFAULT_SOURCE -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -c -o winio.o winio.c gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o nano browser.o chars.o color.o cut.o files.o global.o help.o move.o nano.o prompt.o rcfile.o search.o text.o utils.o winio.o -lmagic -lncursesw -ltinfo make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/src' make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1' make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9kCY5O + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 + cd nano-2.6.1 + make DESTDIR=/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 install Making install in doc make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc' Making install in man make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make install-recursive make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' Making install in fr make[4]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make install-am make[5]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[6]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[6]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/fr' /usr/bin/install -c -m 644 nano.1.html rnano.1.html nanorc.5.html '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/fr' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/fr/man1' /usr/bin/install -c -m 644 nano.1 rnano.1 '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/fr/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/fr/man5' /usr/bin/install -c -m 644 nanorc.5 '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/fr/man5' make[6]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[5]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[4]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man/fr' make[4]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[5]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano' /usr/bin/install -c -m 644 nano.1.html rnano.1.html nanorc.5.html '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/man1' /usr/bin/install -c -m 644 nano.1 rnano.1 '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/man5' /usr/bin/install -c -m 644 nanorc.5 '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/man/man5' make[5]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[4]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/man' Making install in texinfo make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make install-am make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[4]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/info' /usr/bin/install -c -m 644 ./nano.info '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/info' install-info --info-dir='/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/info' '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/info/nano.info' make[4]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/texinfo' Making install in syntax make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/nano' /usr/bin/install -c -m 644 asm.nanorc autoconf.nanorc awk.nanorc changelog.nanorc cmake.nanorc c.nanorc css.nanorc debian.nanorc default.nanorc elisp.nanorc fortran.nanorc gentoo.nanorc go.nanorc groff.nanorc guile.nanorc html.nanorc java.nanorc javascript.nanorc json.nanorc lua.nanorc makefile.nanorc man.nanorc mgp.nanorc mutt.nanorc nanorc.nanorc nftables.nanorc objc.nanorc ocaml.nanorc patch.nanorc perl.nanorc php.nanorc po.nanorc postgresql.nanorc pov.nanorc python.nanorc ruby.nanorc rust.nanorc sh.nanorc spec.nanorc tcl.nanorc '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/nano' /usr/bin/install -c -m 644 tex.nanorc texinfo.nanorc xml.nanorc '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/nano' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc/syntax' make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc' make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano' /usr/bin/install -c -m 644 faq.html '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano' make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc' make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc' make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/doc' Making install in m4 make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1/m4' make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/m4' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/m4' make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/m4' Making install in po make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1/po' /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/bg/LC_MESSAGES installing bg.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/bg/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ca/LC_MESSAGES installing ca.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ca/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/cs/LC_MESSAGES installing cs.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/cs/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/da/LC_MESSAGES installing da.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/da/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/de/LC_MESSAGES installing de.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/de/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/eo/LC_MESSAGES installing eo.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/eo/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/es/LC_MESSAGES installing es.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/es/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/eu/LC_MESSAGES installing eu.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/eu/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/fi/LC_MESSAGES installing fi.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/fi/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/fr/LC_MESSAGES installing fr.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/fr/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ga/LC_MESSAGES installing ga.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ga/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/gl/LC_MESSAGES installing gl.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/gl/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/hr/LC_MESSAGES installing hr.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/hr/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/hu/LC_MESSAGES installing hu.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/hu/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/id/LC_MESSAGES installing id.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/id/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/it/LC_MESSAGES installing it.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/it/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ja/LC_MESSAGES installing ja.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ja/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ms/LC_MESSAGES installing ms.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ms/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nb/LC_MESSAGES installing nb.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nb/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nl/LC_MESSAGES installing nl.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nl/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nn/LC_MESSAGES installing nn.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/nn/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/pl/LC_MESSAGES installing pl.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/pl/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/pt_BR/LC_MESSAGES installing pt_BR.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/pt_BR/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ro/LC_MESSAGES installing ro.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ro/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ru/LC_MESSAGES installing ru.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/ru/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sl/LC_MESSAGES installing sl.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sl/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sr/LC_MESSAGES installing sr.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sr/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sv/LC_MESSAGES installing sv.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/sv/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/tr/LC_MESSAGES installing tr.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/tr/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/uk/LC_MESSAGES installing uk.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/uk/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/vi/LC_MESSAGES installing vi.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/vi/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/zh_CN/LC_MESSAGES installing zh_CN.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/zh_CN/LC_MESSAGES/nano.mo mkdir -p -- /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/zh_TW/LC_MESSAGES installing zh_TW.gmo as /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/locale/zh_TW/LC_MESSAGES/nano.mo if test "nano" = "gettext"; then \ /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/gettext/po; \ for file in Makefile.in.in Makevars remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot ; do \ /usr/bin/install -c -m 644 ./$file \ /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/po' Making install in src make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1/src' make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1/src' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/bin' /usr/bin/install -c nano '/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/bin' make install-exec-hook make[3]: Entering directory '/builddir/build/BUILD/nano-2.6.1/src' cd /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/bin && rm -f rnano && ln -s nano rnano make[3]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/src' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/src' make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1/src' make[1]: Entering directory '/builddir/build/BUILD/nano-2.6.1' make[2]: Entering directory '/builddir/build/BUILD/nano-2.6.1' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/nano-2.6.1' make[1]: Leaving directory '/builddir/build/BUILD/nano-2.6.1' + rm -f /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/info/dir + cp /builddir/build/SOURCES/nanorc ./nanorc + sed -e 's/# set nowrap/set nowrap/' -e 's/^#.*set speller.*$/set speller "hunspell"/' -e 's|^# \(include "/usr/share/nano/\*.nanorc"\)|\1|' doc/nanorc.sample + mkdir -p /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/etc + install -m 644 ./nanorc /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/etc/nanorc + rm -rf /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/fr /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/nano.1.html /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/nanorc.5.html /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano/rnano.1.html + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 nano + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: nano-2.6.1-1.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.SvZKtr + umask 022 + cd /builddir/build/BUILD + cd nano-2.6.1 + DOCDIR=/builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr AUTHORS /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr COPYING /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr ChangeLog /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr INSTALL /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr NEWS /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr README /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr THANKS /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr TODO /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr doc/nanorc.sample /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + cp -pr doc/faq.html /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64/usr/share/doc/nano + exit 0 Provides: config(nano) = 2.6.1-1.fc28 nano = 2.6.1-1.fc28 nano(riscv-64) = 2.6.1-1.fc28 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh /sbin/install-info Requires(preun): /bin/sh /sbin/install-info Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libmagic.so.1()(64bit) libncursesw.so.6()(64bit) libtinfo.so.6()(64bit) rtld(GNU_HASH) Conflicts: filesystem < 3 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /builddir/build/SRPMS/nano-2.6.1-1.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/nano-2.6.1-1.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.EZQFse + umask 022 + cd /builddir/build/BUILD + cd nano-2.6.1 + /usr/bin/rm -rf /builddir/build/BUILDROOT/nano-2.6.1-1.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off