OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 08:39:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/mpfr-3.1.5-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/mpfr.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.7 MB/s | 831 kB 00:04 ETA Local RPMS 9% [=- ] 2.6 MB/s | 1.1 MB 00:04 ETA Local RPMS 16% [=== ] 2.6 MB/s | 2.0 MB 00:03 ETA Local RPMS 25% [===== ] 2.7 MB/s | 3.0 MB 00:03 ETA Local RPMS 33% [======- ] 2.7 MB/s | 4.0 MB 00:02 ETA Local RPMS 41% [======== ] 2.7 MB/s | 4.8 MB 00:02 ETA Local RPMS 49% [=========- ] 2.7 MB/s | 5.7 MB 00:02 ETA Local RPMS 55% [=========== ] 2.7 MB/s | 6.5 MB 00:01 ETA Local RPMS 59% [===========- ] 2.5 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [=============- ] 2.6 MB/s | 7.9 MB 00:01 ETA Local RPMS 75% [=============== ] 2.6 MB/s | 8.8 MB 00:01 ETA Local RPMS 81% [================ ] 2.6 MB/s | 9.5 MB 00:00 ETA Local RPMS 86% [================= ] 2.5 MB/s | 10 MB 00:00 ETA Local RPMS 92% [================== ] 2.5 MB/s | 11 MB 00:00 ETA Local RPMS 97% [=================== ] 2.5 MB/s | 11 MB 00:00 ETA Local RPMS 2.0 MB/s | 12 MB 00:05 Last metadata expiration check: 0:01:33 ago on Thu Feb 22 08:39:36 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k gmp-devel riscv64 1:6.1.2-7.fc27 local 185 k libtool riscv64 2.4.6-21.fc27 local 707 k Installing dependencies: automake noarch 1.15.1-3.fc28 local 706 k emacs-filesystem noarch 1:25.3-5.fc28 local 67 k gmp-c++ riscv64 1:6.1.2-7.fc27 local 128 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k tar riscv64 2:1.29-7.fc27 local 805 k Transaction Summary ================================================================================ Install 42 Packages Total download size: 18 M Installed size: 55 M Downloading Packages: (1/42): gmp-devel-6. 0% [ ] --- B/s | 0 B --:-- ETA (1/42): gmp-c++-6.1.2-7.fc27.riscv64.rpm 606 kB/s | 128 kB 00:00 (2-3/42): autoconf-2 2% [ ] 1.6 MB/s | 383 kB 00:11 ETA (2/42): gmp-devel-6.1.2-7.fc27.riscv64.rpm 520 kB/s | 185 kB 00:00 (3-4/42): emacs-file 3% [- ] 1.6 MB/s | 568 kB 00:11 ETA (3/42): emacs-filesystem-25.3-5.fc28.noarch.rpm 448 kB/s | 67 kB 00:00 (4-5/42): libtool-2. 3% [- ] 1.5 MB/s | 604 kB 00:11 ETA (4-6/42): tar-1.29-7 7% [= ] 1.6 MB/s | 1.4 MB 00:10 ETA (4/42): autoconf-2.69-26.fc28.noarch.rpm 729 kB/s | 709 kB 00:00 (5-6/42): tar-1.29-7 11% [== ] 1.6 MB/s | 2.1 MB 00:09 ETA (5/42): libtool-2.4.6-21.fc27.riscv64.rpm 731 kB/s | 707 kB 00:00 (6-7/42): tar-1.29-7 14% [==- ] 1.7 MB/s | 2.6 MB 00:09 ETA (6/42): perl-Carp-1.42-408.fc27.0.riscv64.noarc 727 kB/s | 84 kB 00:00 (7-8/42): tar-1.29-7 15% [=== ] 1.7 MB/s | 2.9 MB 00:09 ETA (7/42): tar-1.29-7.fc27.riscv64.rpm 674 kB/s | 805 kB 00:01 (8-9/42): automake-1 16% [=== ] 1.6 MB/s | 2.9 MB 00:09 ETA (8/42): perl-File-Path-2.15-1.fc27.noarch.rpm 592 kB/s | 37 kB 00:00 (9-10/42): automake- 16% [=== ] 1.6 MB/s | 3.1 MB 00:09 ETA (9/42): perl-Exporter-5.72-408.fc27.0.riscv64.n 274 kB/s | 87 kB 00:00 (10-11/42): automake 17% [=== ] 1.6 MB/s | 3.1 MB 00:09 ETA (10/42): perl-Getopt-Long-2.50-3.fc27.noarch.rp 436 kB/s | 61 kB 00:00 (11-12/42): automake 17% [===- ] 1.6 MB/s | 3.2 MB 00:09 ETA (11/42): perl-Thread-Queue-3.12-408.fc27.0.risc 558 kB/s | 77 kB 00:00 (12-13/42): automake 18% [===- ] 1.6 MB/s | 3.4 MB 00:09 ETA (12/42): perl-constant-1.33-408.fc27.0.riscv64. 502 kB/s | 79 kB 00:00 (13-14/42): automake 19% [===- ] 1.6 MB/s | 3.5 MB 00:09 ETA (13/42): perl-Errno-1.28-408.fc28.1.riscv64.ris 456 kB/s | 73 kB 00:00 (14-15/42): perl-lib 19% [===- ] 1.6 MB/s | 3.6 MB 00:09 ETA (14/42): automake-1.15.1-3.fc28.noarch.rpm 474 kB/s | 706 kB 00:01 (15-16/42): perl-int 22% [==== ] 1.6 MB/s | 4.1 MB 00:09 ETA (15/42): perl-IO-1.38-408.fc28.1.riscv64.riscv6 798 kB/s | 176 kB 00:00 (16-17/42): perl-int 25% [===== ] 1.6 MB/s | 4.6 MB 00:08 ETA (16/42): perl-PathTools-3.67-408.fc27.0.riscv64 817 kB/s | 166 kB 00:00 (17-18/42): perl-int 28% [=====- ] 1.6 MB/s | 5.1 MB 00:08 ETA (17/42): perl-threads-2.21-1.fc27.riscv64.rpm 802 kB/s | 104 kB 00:00 (18-19/42): perl-lib 29% [=====- ] 1.6 MB/s | 5.4 MB 00:07 ETA (18/42): perl-Text-ParseWords-3.30-408.fc27.0.r 626 kB/s | 73 kB 00:00 (19-20/42): perl-lib 31% [====== ] 1.6 MB/s | 5.7 MB 00:07 ETA (19-21/42): m4-1.4.1 35% [======= ] 1.7 MB/s | 6.5 MB 00:06 ETA (19/42): m4-1.4.18-5.fc28.riscv64.rpm 871 kB/s | 369 kB 00:00 (20-21/42): perl-lib 37% [======= ] 1.7 MB/s | 6.8 MB 00:06 ETA (20/42): perl-Data-Dumper-2.167-408.fc27.0.risc 650 kB/s | 149 kB 00:00 (21-22/42): perl-lib 39% [=======- ] 1.7 MB/s | 7.2 MB 00:06 ETA (21/42): perl-Text-Tabs+Wrap-2013.0523-408.fc27 658 kB/s | 80 kB 00:00 (22-23/42): perl-int 40% [======== ] 1.7 MB/s | 7.5 MB 00:06 ETA (22/42): perl-parent-0.236-408.fc27.0.riscv64.n 667 kB/s | 71 kB 00:00 (23-24/42): perl-int 42% [======== ] 1.7 MB/s | 7.7 MB 00:06 ETA (23/42): perl-Scalar-List-Utils-1.48-1.fc27.ris 773 kB/s | 119 kB 00:00 (24-25/42): perl-int 44% [========- ] 1.7 MB/s | 8.1 MB 00:05 ETA (24/42): perl-Unicode-Normalize-1.25-408.fc27.0 736 kB/s | 164 kB 00:00 (25-26/42): perl-int 46% [========= ] 1.7 MB/s | 8.6 MB 00:05 ETA (25/42): perl-macros-5.26.1-408.fc28.1.riscv64. 712 kB/s | 69 kB 00:00 (26-27/42): perl-int 48% [=========- ] 1.7 MB/s | 8.8 MB 00:05 ETA (26/42): perl-threads-shared-1.58-1.fc27.riscv6 780 kB/s | 91 kB 00:00 (27-28/42): perl-int 49% [=========- ] 1.7 MB/s | 9.1 MB 00:05 ETA (27/42): perl-Socket-2.027-1.fc27.riscv64.rpm 826 kB/s | 95 kB 00:00 (28-29/42): perl-lib 51% [========== ] 1.7 MB/s | 9.4 MB 00:05 ETA (28/42): perl-Pod-Usage-1.69-408.fc27.0.riscv64 777 kB/s | 89 kB 00:00 (29-30/42): perl-lib 52% [==========- ] 1.7 MB/s | 9.6 MB 00:04 ETA (29/42): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 870 kB/s | 139 kB 00:00 (30-31/42): perl-lib 55% [=========== ] 1.8 MB/s | 10 MB 00:04 ETA (30/42): perl-podlators-4.09-408.fc27.0.riscv64 861 kB/s | 157 kB 00:00 (31-32/42): perl-lib 57% [===========- ] 1.8 MB/s | 11 MB 00:04 ETA (31/42): perl-File-Temp-0.230.400-408.fc27.0.ri 783 kB/s | 103 kB 00:00 (32-33/42): perl-lib 59% [===========- ] 1.8 MB/s | 11 MB 00:04 ETA (32/42): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 785 kB/s | 97 kB 00:00 (33-34/42): perl-lib 61% [============ ] 1.8 MB/s | 11 MB 00:03 ETA (33/42): perl-Pod-Simple-3.35-408.fc27.0.riscv6 878 kB/s | 271 kB 00:00 (34-35/42): perl-int 65% [============= ] 1.8 MB/s | 12 MB 00:03 ETA (34-36/42): perl-Enc 70% [============== ] 1.9 MB/s | 13 MB 00:02 ETA (34/42): perl-libs-5.26.1-408.fc28.1.riscv64.ri 664 kB/s | 3.3 MB 00:05 (35-36/42): perl-int 72% [==============- ] 1.8 MB/s | 13 MB 00:02 ETA (35/42): perl-Time-Local-1.250-394.fc27.noarch. 716 kB/s | 30 kB 00:00 (36-37/42): perl-int 73% [==============- ] 1.8 MB/s | 13 MB 00:02 ETA (36/42): perl-MIME-Base64-3.15-408.fc27.0.riscv 895 kB/s | 111 kB 00:00 (37-38/42): perl-int 74% [==============- ] 1.8 MB/s | 14 MB 00:02 ETA (37/42): perl-Storable-2.62-408.fc27.0.riscv64. 884 kB/s | 205 kB 00:00 (38-39/42): perl-int 78% [===============- ] 1.8 MB/s | 14 MB 00:02 ETA (38/42): perl-Term-ANSIColor-4.06-408.fc27.0.ri 837 kB/s | 94 kB 00:00 (39-40/42): perl-int 79% [===============- ] 1.8 MB/s | 15 MB 00:02 ETA (39/42): perl-Term-Cap-1.17-408.fc27.0.riscv64. 834 kB/s | 78 kB 00:00 (40-41/42): perl-int 80% [================ ] 1.8 MB/s | 15 MB 00:01 ETA (40/42): perl-Pod-Escapes-1.07-408.fc27.0.riscv 834 kB/s | 77 kB 00:00 (41-42/42): perl-int 82% [================ ] 1.8 MB/s | 15 MB 00:01 ETA (41/42): perl-Encode-2.94-16.fc27.riscv64.rpm 704 kB/s | 1.4 MB 00:02 (42/42): perl-interp 86% [================= ] 1.8 MB/s | 16 MB 00:01 ETA (42/42): perl-interp 91% [================== ] 1.9 MB/s | 17 MB 00:00 ETA (42/42): perl-interp 96% [=================== ] 2.0 MB/s | 18 MB 00:00 ETA (42/42): perl-interpreter-5.26.1-408.fc28.1.ris 871 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.7 MB/s | 18 MB 00:10 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/42 Installing : perl-Exporter-5.72-408.f [===== ] 1/42 Installing : perl-Exporter-5.72-408.f [======= ] 1/42 Installing : perl-Exporter-5.72-408.f [==================== ] 1/42 Installing : perl-Exporter-5.72-408.f [======================== ] 1/42 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/42 Installing : perl-libs-4:5.26.1-408.f [ ] 2/42 Installing : perl-libs-4:5.26.1-408.f [= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/42 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/42 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/42 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/42 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/42 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/42 Installing : perl-Carp-1.42-408.fc27. [ ] 3/42 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/42 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/42 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/42 Installing : perl-Scalar-List-Utils-3 [ ] 4/42 Installing : perl-Scalar-List-Utils-3 [= ] 4/42 Installing : perl-Scalar-List-Utils-3 [== ] 4/42 Installing : perl-Scalar-List-Utils-3 [=== ] 4/42 Installing : perl-Scalar-List-Utils-3 [===== ] 4/42 Installing : perl-Scalar-List-Utils-3 [======== ] 4/42 Installing : perl-Scalar-List-Utils-3 [========== ] 4/42 Installing : perl-Scalar-List-Utils-3 [============= ] 4/42 Installing : perl-Scalar-List-Utils-3 [================ ] 4/42 Installing : perl-Scalar-List-Utils-3 [================== ] 4/42 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/42 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/42 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/42 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/42 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/42 Installing : perl-Text-ParseWords-3.3 [ ] 5/42 Installing : perl-Text-ParseWords-3.3 [======= ] 5/42 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/42 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/42 Installing : perl-Term-ANSIColor-4.06 [ ] 6/42 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/42 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/42 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/42 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/42 Installing : perl-macros-4:5.26.1-408 [ ] 7/42 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/42 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/42 Installing : perl-constant-1.33-408.f [ ] 8/42 Installing : perl-constant-1.33-408.f [======= ] 8/42 Installing : perl-constant-1.33-408.f [======================== ] 8/42 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 8/42 Installing : perl-Errno-1.28-408.fc28 [ ] 9/42 Installing : perl-Errno-1.28-408.fc28 [================= ] 9/42 Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/42 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/42 Installing : perl-File-Path-2.15-1.fc [ ] 10/42 Installing : perl-File-Path-2.15-1.fc [==== ] 10/42 Installing : perl-File-Path-2.15-1.fc [======== ] 10/42 Installing : perl-File-Path-2.15-1.fc [==================== ] 10/42 Installing : perl-File-Path-2.15-1.fc [======================== ] 10/42 Installing : perl-File-Path-2.15-1.fc27.noarch 10/42 Installing : perl-PathTools-3.67-408. [ ] 11/42 Installing : perl-PathTools-3.67-408. [== ] 11/42 Installing : perl-PathTools-3.67-408. [=== ] 11/42 Installing : perl-PathTools-3.67-408. [==== ] 11/42 Installing : perl-PathTools-3.67-408. [======= ] 11/42 Installing : perl-PathTools-3.67-408. [========= ] 11/42 Installing : perl-PathTools-3.67-408. [=========== ] 11/42 Installing : perl-PathTools-3.67-408. [============== ] 11/42 Installing : perl-PathTools-3.67-408. [================== ] 11/42 Installing : perl-PathTools-3.67-408. [==================== ] 11/42 Installing : perl-PathTools-3.67-408. [===================== ] 11/42 Installing : perl-PathTools-3.67-408. [====================== ] 11/42 Installing : perl-PathTools-3.67-408. [======================= ] 11/42 Installing : perl-PathTools-3.67-408. [======================== ] 11/42 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/42 Installing : perl-threads-shared-1.58 [ ] 12/42 Installing : perl-threads-shared-1.58 [=== ] 12/42 Installing : perl-threads-shared-1.58 [======= ] 12/42 Installing : perl-threads-shared-1.58 [========== ] 12/42 Installing : perl-threads-shared-1.58 [============== ] 12/42 Installing : perl-threads-shared-1.58 [================= ] 12/42 Installing : perl-threads-shared-1.58 [==================== ] 12/42 Installing : perl-threads-shared-1.58 [======================= ] 12/42 Installing : perl-threads-shared-1.58 [======================== ] 12/42 Installing : perl-threads-shared-1.58-1.fc27.riscv64 12/42 Installing : perl-threads-1:2.21-1.fc [ ] 13/42 Installing : perl-threads-1:2.21-1.fc [=== ] 13/42 Installing : perl-threads-1:2.21-1.fc [====== ] 13/42 Installing : perl-threads-1:2.21-1.fc [========= ] 13/42 Installing : perl-threads-1:2.21-1.fc [============= ] 13/42 Installing : perl-threads-1:2.21-1.fc [================ ] 13/42 Installing : perl-threads-1:2.21-1.fc [================== ] 13/42 Installing : perl-threads-1:2.21-1.fc [===================== ] 13/42 Installing : perl-threads-1:2.21-1.fc [====================== ] 13/42 Installing : perl-threads-1:2.21-1.fc [======================= ] 13/42 Installing : perl-threads-1:2.21-1.fc [======================== ] 13/42 Installing : perl-threads-1:2.21-1.fc27.riscv64 13/42 Installing : perl-Text-Tabs+Wrap-2013 [ ] 14/42 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 14/42 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 14/42 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 14/42 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 14/42 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 14/42 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 14/42 Installing : perl-parent-1:0.236-408. [ ] 15/42 Installing : perl-parent-1:0.236-408. [============ ] 15/42 Installing : perl-parent-1:0.236-408. [======================== ] 15/42 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 15/42 Installing : perl-Unicode-Normalize-1 [ ] 16/42 Installing : perl-Unicode-Normalize-1 [= ] 16/42 Installing : perl-Unicode-Normalize-1 [== ] 16/42 Installing : perl-Unicode-Normalize-1 [=== ] 16/42 Installing : perl-Unicode-Normalize-1 [==== ] 16/42 Installing : perl-Unicode-Normalize-1 [===== ] 16/42 Installing : perl-Unicode-Normalize-1 [====== ] 16/42 Installing : perl-Unicode-Normalize-1 [======= ] 16/42 Installing : perl-Unicode-Normalize-1 [======== ] 16/42 Installing : perl-Unicode-Normalize-1 [========= ] 16/42 Installing : perl-Unicode-Normalize-1 [========== ] 16/42 Installing : perl-Unicode-Normalize-1 [============ ] 16/42 Installing : perl-Unicode-Normalize-1 [============= ] 16/42 Installing : perl-Unicode-Normalize-1 [============== ] 16/42 Installing : perl-Unicode-Normalize-1 [=============== ] 16/42 Installing : perl-Unicode-Normalize-1 [================ ] 16/42 Installing : perl-Unicode-Normalize-1 [================= ] 16/42 Installing : perl-Unicode-Normalize-1 [================== ] 16/42 Installing : perl-Unicode-Normalize-1 [=================== ] 16/42 Installing : perl-Unicode-Normalize-1 [==================== ] 16/42 Installing : perl-Unicode-Normalize-1 [===================== ] 16/42 Installing : perl-Unicode-Normalize-1 [====================== ] 16/42 Installing : perl-Unicode-Normalize-1 [======================= ] 16/42 Installing : perl-Unicode-Normalize-1 [======================== ] 16/42 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 16/42 Installing : perl-interpreter-4:5.26. [ ] 17/42random: crng init done Installing : perl-interpreter-4:5.26. [= ] 17/42 Installing : perl-interpreter-4:5.26. [== ] 17/42 Installing : perl-interpreter-4:5.26. [=== ] 17/42 Installing : perl-interpreter-4:5.26. [==== ] 17/42 Installing : perl-interpreter-4:5.26. [===== ] 17/42 Installing : perl-interpreter-4:5.26. [====== ] 17/42 Installing : perl-interpreter-4:5.26. [======= ] 17/42 Installing : perl-interpreter-4:5.26. [======== ] 17/42 Installing : perl-interpreter-4:5.26. [========= ] 17/42 Installing : perl-interpreter-4:5.26. [========== ] 17/42 Installing : perl-interpreter-4:5.26. [=========== ] 17/42 Installing : perl-interpreter-4:5.26. [============ ] 17/42 Installing : perl-interpreter-4:5.26. [============= ] 17/42 Installing : perl-interpreter-4:5.26. [============== ] 17/42 Installing : perl-interpreter-4:5.26. [=============== ] 17/42 Installing : perl-interpreter-4:5.26. [================ ] 17/42 Installing : perl-interpreter-4:5.26. [================= ] 17/42 Installing : perl-interpreter-4:5.26. [================== ] 17/42 Installing : perl-interpreter-4:5.26. [=================== ] 17/42 Installing : perl-interpreter-4:5.26. [==================== ] 17/42 Installing : perl-interpreter-4:5.26. [===================== ] 17/42 Installing : perl-interpreter-4:5.26. [====================== ] 17/42 Installing : perl-interpreter-4:5.26. [======================= ] 17/42 Installing : perl-interpreter-4:5.26. [======================== ] 17/42 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/42 Installing : perl-Socket-4:2.027-1.fc [ ] 18/42 Installing : perl-Socket-4:2.027-1.fc [=== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [======= ] 18/42 Installing : perl-Socket-4:2.027-1.fc [========== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [============== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [================= ] 18/42 Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/42 Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/42 Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/42 Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/42 Installing : perl-IO-1.38-408.fc28.1. [ ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [= ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/42 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/42 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/42 Installing : perl-File-Temp-0.230.400 [ ] 20/42 Installing : perl-File-Temp-0.230.400 [=== ] 20/42 Installing : perl-File-Temp-0.230.400 [============ ] 20/42 Installing : perl-File-Temp-0.230.400 [===================== ] 20/42 Installing : perl-File-Temp-0.230.400 [======================== ] 20/42 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 20/42 Installing : perl-Storable-1:2.62-408 [ ] 21/42 Installing : perl-Storable-1:2.62-408 [== ] 21/42 Installing : perl-Storable-1:2.62-408 [==== ] 21/42 Installing : perl-Storable-1:2.62-408 [====== ] 21/42 Installing : perl-Storable-1:2.62-408 [======== ] 21/42 Installing : perl-Storable-1:2.62-408 [========== ] 21/42 Installing : perl-Storable-1:2.62-408 [============ ] 21/42 Installing : perl-Storable-1:2.62-408 [============== ] 21/42 Installing : perl-Storable-1:2.62-408 [================ ] 21/42 Installing : perl-Storable-1:2.62-408 [================== ] 21/42 Installing : perl-Storable-1:2.62-408 [==================== ] 21/42 Installing : perl-Storable-1:2.62-408 [====================== ] 21/42 Installing : perl-Storable-1:2.62-408 [======================== ] 21/42 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/42 Installing : perl-MIME-Base64-3.15-40 [ ] 22/42 Installing : perl-MIME-Base64-3.15-40 [= ] 22/42 Installing : perl-MIME-Base64-3.15-40 [== ] 22/42 Installing : perl-MIME-Base64-3.15-40 [========== ] 22/42 Installing : perl-MIME-Base64-3.15-40 [================== ] 22/42 Installing : perl-MIME-Base64-3.15-40 [======================= ] 22/42 Installing : perl-MIME-Base64-3.15-40 [======================== ] 22/42 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 22/42 Installing : perl-Term-Cap-1.17-408.f [ ] 23/42 Installing : perl-Term-Cap-1.17-408.f [==== ] 23/42 Installing : perl-Term-Cap-1.17-408.f [======================== ] 23/42 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 23/42 Installing : perl-Pod-Escapes-1:1.07- [ ] 24/42 Installing : perl-Pod-Escapes-1:1.07- [==== ] 24/42 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 24/42 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 24/42 Installing : perl-Time-Local-1:1.250- [ ] 25/42 Installing : perl-Time-Local-1:1.250- [= ] 25/42 Installing : perl-Time-Local-1:1.250- [===== ] 25/42 Installing : perl-Time-Local-1:1.250- [======== ] 25/42 Installing : perl-Time-Local-1:1.250- [========= ] 25/42 Installing : perl-Time-Local-1:1.250- [================= ] 25/42 Installing : perl-Time-Local-1:1.250- [=================== ] 25/42 Installing : perl-Time-Local-1:1.250- [======================== ] 25/42 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 25/42 Installing : perl-HTTP-Tiny-0.070-408 [ ] 26/42 Installing : perl-HTTP-Tiny-0.070-408 [== ] 26/42 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 26/42 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 26/42 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 26/42 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 26/42 Installing : perl-Pod-Simple-1:3.35-4 [ ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 27/42 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 27/42 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 27/42 Installing : perl-Encode-4:2.94-16.fc [ ] 28/42 Installing : perl-Encode-4:2.94-16.fc [= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [=== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [==== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [===== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [====== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [======= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [======== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [========= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [========== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [=========== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [============ ] 28/42 Installing : perl-Encode-4:2.94-16.fc [============= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [============== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [=============== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [================ ] 28/42 Installing : perl-Encode-4:2.94-16.fc [================= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [=================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [==================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [===================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [====================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc [======================= ] 28/42 Installing : perl-Encode-4:2.94-16.fc [======================== ] 28/42 Installing : perl-Encode-4:2.94-16.fc27.riscv64 28/42 Installing : perl-Getopt-Long-1:2.50- [ ] 29/42 Installing : perl-Getopt-Long-1:2.50- [=== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [==== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [===== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [====== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [======= ] 29/42 Installing : perl-Getopt-Long-1:2.50- [========= ] 29/42 Installing : perl-Getopt-Long-1:2.50- [=============== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [===================== ] 29/42 Installing : perl-Getopt-Long-1:2.50- [======================== ] 29/42 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 29/42 Installing : perl-Pod-Usage-4:1.69-40 [ ] 30/42 Installing : perl-Pod-Usage-4:1.69-40 [== ] 30/42 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 30/42 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 30/42 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 30/42 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/42 Installing : perl-podlators-4.09-408. [ ] 31/42 Installing : perl-podlators-4.09-408. [= ] 31/42 Installing : perl-podlators-4.09-408. [== ] 31/42 Installing : perl-podlators-4.09-408. [=== ] 31/42 Installing : perl-podlators-4.09-408. [==== ] 31/42 Installing : perl-podlators-4.09-408. [===== ] 31/42 Installing : perl-podlators-4.09-408. [====== ] 31/42 Installing : perl-podlators-4.09-408. [======= ] 31/42 Installing : perl-podlators-4.09-408. [=========== ] 31/42 Installing : perl-podlators-4.09-408. [=============== ] 31/42 Installing : perl-podlators-4.09-408. [================ ] 31/42 Installing : perl-podlators-4.09-408. [================= ] 31/42 Installing : perl-podlators-4.09-408. [===================== ] 31/42 Installing : perl-podlators-4.09-408. [====================== ] 31/42 Installing : perl-podlators-4.09-408. [======================= ] 31/42 Installing : perl-podlators-4.09-408. [======================== ] 31/42 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 31/42 Installing : perl-Pod-Perldoc-3.28-40 [ ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [= ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 32/42 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 32/42 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 32/42 Installing : perl-Thread-Queue-3.12-4 [ ] 33/42 Installing : perl-Thread-Queue-3.12-4 [===== ] 33/42 Installing : perl-Thread-Queue-3.12-4 [====== ] 33/42 Installing : perl-Thread-Queue-3.12-4 [======================== ] 33/42 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 33/42 Installing : perl-Data-Dumper-2.167-4 [ ] 34/42 Installing : perl-Data-Dumper-2.167-4 [=== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [==== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [======== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [============ ] 34/42 Installing : perl-Data-Dumper-2.167-4 [=============== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [=================== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [====================== ] 34/42 Installing : perl-Data-Dumper-2.167-4 [======================= ] 34/42 Installing : perl-Data-Dumper-2.167-4 [======================== ] 34/42 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 34/42 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 35/42 Installing : m4-1.4.18-5.fc28.riscv64 35/42 Running scriptlet: m4-1.4.18-5.fc28.riscv64 35/42 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 36/42 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 36/42 Installing : tar-2:1.29-7.fc27.riscv64 36/42 Running scriptlet: tar-2:1.29-7.fc27.riscv64 36/42 Installing : emacs-filesystem-1:25.3- [ ] 37/42 Installing : emacs-filesystem-1:25.3- [===== ] 37/42 Installing : emacs-filesystem-1:25.3- [============ ] 37/42 Installing : emacs-filesystem-1:25.3- [=================== ] 37/42 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 37/42 Installing : autoconf-2.69-26.fc28.no [ ] 38/42 Installing : autoconf-2.69-26.fc28.no [= ] 38/42 Installing : autoconf-2.69-26.fc28.no [== ] 38/42 Installing : autoconf-2.69-26.fc28.no [=== ] 38/42 Installing : autoconf-2.69-26.fc28.no [==== ] 38/42 Installing : autoconf-2.69-26.fc28.no [===== ] 38/42 Installing : autoconf-2.69-26.fc28.no [====== ] 38/42 Installing : autoconf-2.69-26.fc28.no [======= ] 38/42 Installing : autoconf-2.69-26.fc28.no [======== ] 38/42 Installing : autoconf-2.69-26.fc28.no [========= ] 38/42 Installing : autoconf-2.69-26.fc28.no [========== ] 38/42 Installing : autoconf-2.69-26.fc28.no [=========== ] 38/42 Installing : autoconf-2.69-26.fc28.no [============ ] 38/42 Installing : autoconf-2.69-26.fc28.no [============= ] 38/42 Installing : autoconf-2.69-26.fc28.no [============== ] 38/42 Installing : autoconf-2.69-26.fc28.no [=============== ] 38/42 Installing : autoconf-2.69-26.fc28.no [================ ] 38/42 Installing : autoconf-2.69-26.fc28.no [================= ] 38/42 Installing : autoconf-2.69-26.fc28.no [================== ] 38/42 Installing : autoconf-2.69-26.fc28.no [=================== ] 38/42 Installing : autoconf-2.69-26.fc28.no [==================== ] 38/42 Installing : autoconf-2.69-26.fc28.no [===================== ] 38/42 Installing : autoconf-2.69-26.fc28.no [====================== ] 38/42 Installing : autoconf-2.69-26.fc28.no [======================= ] 38/42 Installing : autoconf-2.69-26.fc28.no [======================== ] 38/42 Installing : autoconf-2.69-26.fc28.noarch 38/42 Running scriptlet: autoconf-2.69-26.fc28.noarch 38/42 Installing : automake-1.15.1-3.fc28.n [ ] 39/42 Installing : automake-1.15.1-3.fc28.n [= ] 39/42 Installing : automake-1.15.1-3.fc28.n [== ] 39/42 Installing : automake-1.15.1-3.fc28.n [=== ] 39/42 Installing : automake-1.15.1-3.fc28.n [==== ] 39/42 Installing : automake-1.15.1-3.fc28.n [===== ] 39/42 Installing : automake-1.15.1-3.fc28.n [====== ] 39/42 Installing : automake-1.15.1-3.fc28.n [======= ] 39/42 Installing : automake-1.15.1-3.fc28.n [======== ] 39/42 Installing : automake-1.15.1-3.fc28.n [========= ] 39/42 Installing : automake-1.15.1-3.fc28.n [========== ] 39/42 Installing : automake-1.15.1-3.fc28.n [=========== ] 39/42 Installing : automake-1.15.1-3.fc28.n [============ ] 39/42 Installing : automake-1.15.1-3.fc28.n [============= ] 39/42 Installing : automake-1.15.1-3.fc28.n [============== ] 39/42 Installing : automake-1.15.1-3.fc28.n [=============== ] 39/42 Installing : automake-1.15.1-3.fc28.n [================ ] 39/42 Installing : automake-1.15.1-3.fc28.n [================= ] 39/42 Installing : automake-1.15.1-3.fc28.n [================== ] 39/42 Installing : automake-1.15.1-3.fc28.n [=================== ] 39/42 Installing : automake-1.15.1-3.fc28.n [==================== ] 39/42 Installing : automake-1.15.1-3.fc28.n [===================== ] 39/42 Installing : automake-1.15.1-3.fc28.n [====================== ] 39/42 Installing : automake-1.15.1-3.fc28.n [======================= ] 39/42 Installing : automake-1.15.1-3.fc28.n [======================== ] 39/42 Installing : automake-1.15.1-3.fc28.noarch 39/42 Running scriptlet: automake-1.15.1-3.fc28.noarch 39/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [ ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [=== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [===== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [======= ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [========= ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [=========== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [============= ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [=============== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [================= ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [=================== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [===================== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [======================= ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.r [======================== ] 40/42 Installing : gmp-c++-1:6.1.2-7.fc27.riscv64 40/42 Running scriptlet: gmp-c++-1:6.1.2-7.fc27.riscv64 40/42 Installing : gmp-devel-1:6.1.2-7.fc27 [ ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [===== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [====== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [======== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [=========== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [============= ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [=============== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [================= ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [=================== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [===================== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [======================= ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27 [======================== ] 41/42 Installing : gmp-devel-1:6.1.2-7.fc27.riscv64 41/42 Running scriptlet: gmp-devel-1:6.1.2-7.fc27.riscv64 41/42 Installing : libtool-2.4.6-21.fc27.ri [ ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [=== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [==== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [===== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [====== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [======= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [======== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [========= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [========== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [============ ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [============= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [============== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [================ ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [================= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [================== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 42/42 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 42/42 Installing : libtool-2.4.6-21.fc27.riscv64 42/42 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 42/42 Verifying : gmp-devel-1:6.1.2-7.fc27.riscv64 1/42 Verifying : gmp-c++-1:6.1.2-7.fc27.riscv64 2/42 Verifying : autoconf-2.69-26.fc28.noarch 3/42 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 4/42 Verifying : libtool-2.4.6-21.fc27.riscv64 5/42 Verifying : tar-2:1.29-7.fc27.riscv64 6/42 Verifying : automake-1.15.1-3.fc28.noarch 7/42 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 8/42 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 9/42 Verifying : perl-File-Path-2.15-1.fc27.noarch 10/42 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 11/42 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 12/42 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 13/42 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 14/42 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 15/42 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 16/42 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 17/42 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 18/42 Verifying : perl-threads-1:2.21-1.fc27.riscv64 19/42 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 20/42 Verifying : m4-1.4.18-5.fc28.riscv64 21/42 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 22/42 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 23/42 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 24/42 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 25/42 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 26/42 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 27/42 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 28/42 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 29/42 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 30/42 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 31/42 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 32/42 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 33/42 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 34/42 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 35/42 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 36/42 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 37/42 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 38/42 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 39/42 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 40/42 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 41/42 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 42/42 Installed: autoconf.noarch 2.69-26.fc28 gmp-devel.riscv64 1:6.1.2-7.fc27 libtool.riscv64 2.4.6-21.fc27 automake.noarch 1.15.1-3.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 gmp-c++.riscv64 1:6.1.2-7.fc27 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 tar.riscv64 2:1.29-7.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:00:02 ago on Thu Feb 22 08:44:03 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:00:23 ago on Thu Feb 22 08:44:03 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group unzip shadow-utils bash rpm-build fedora-release tar xz diffutils util-linux cpio grep patch sed which findutils info make gawk coreutils bzip2 redhat-rpm-config gzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 30 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/30): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/30): redhat-rpm-config-96-1.fc28.0.riscv64.n 754 kB/s | 75 kB 00:00 (2-3/30): diffutils- 1% [ ] 1.6 MB/s | 235 kB 00:07 ETA (2/30): nim-srpm-macros-1-1.fc28.noarch.rpm 255 kB/s | 7.6 kB 00:00 (3-4/30): diffutils- 2% [ ] 1.6 MB/s | 274 kB 00:07 ETA (3/30): ocaml-srpm-macros-5-2.fc27.noarch.rpm 311 kB/s | 7.8 kB 00:00 (4-5/30): diffutils- 2% [- ] 1.6 MB/s | 314 kB 00:07 ETA (4/30): openblas-srpm-macros-2-2.fc27.noarch.rp 271 kB/s | 6.6 kB 00:00 (5-6/30): diffutils- 2% [- ] 1.6 MB/s | 353 kB 00:07 ETA (5/30): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 347 kB/s | 9.0 kB 00:00 (6-7/30): diffutils- 3% [- ] 1.5 MB/s | 394 kB 00:07 ETA (6/30): rust-srpm-macros-5-1.fc28.noarch.rpm 309 kB/s | 8.0 kB 00:00 (7-8/30): diffutils- 3% [- ] 1.5 MB/s | 434 kB 00:07 ETA (7/30): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 863 kB/s | 235 kB 00:00 (8-9/30): diffutils- 9% [=- ] 1.6 MB/s | 1.1 MB 00:06 ETA (8/30): make-4.2.1-6.fc27.riscv64.rpm 562 kB/s | 486 kB 00:00 (9-10/30): zstd-1.3. 11% [== ] 1.6 MB/s | 1.4 MB 00:06 ETA (9/30): which-2.21-4.fc28.riscv64.rpm 692 kB/s | 65 kB 00:00 (10-11/30): zstd-1.3 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (10/30): diffutils-3.6-3.fc28.riscv64.rpm 514 kB/s | 577 kB 00:01 (11-12/30): patch-2. 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (11/30): patch-2.7.5-6.fc27.riscv64.rpm 671 kB/s | 270 kB 00:00 (12-13/30): unzip-6. 20% [==== ] 1.6 MB/s | 2.4 MB 00:05 ETA (12/30): unzip-6.0-36.fc28.riscv64.rpm 775 kB/s | 398 kB 00:00 (13-14/30): xz-5.2.3 23% [====- ] 1.6 MB/s | 2.8 MB 00:05 ETA (13/30): xz-5.2.3-5.fc28.riscv64.rpm 655 kB/s | 212 kB 00:00 (14-15/30): zstd-1.3 25% [===== ] 1.6 MB/s | 3.0 MB 00:05 ETA (14/30): bzip2-1.0.6-24.fc28.riscv64.rpm 482 kB/s | 81 kB 00:00 (15-16/30): zstd-1.3 25% [===== ] 1.6 MB/s | 3.1 MB 00:05 ETA (15/30): file-5.32-3.fc28.riscv64.rpm 753 kB/s | 81 kB 00:00 (16-17/30): zstd-1.3 28% [=====- ] 1.6 MB/s | 3.3 MB 00:05 ETA (16-18/30): elfutils 34% [======- ] 1.7 MB/s | 4.1 MB 00:04 ETA (16/30): zstd-1.3.3-1.fc27.riscv64.rpm 615 kB/s | 1.1 MB 00:01 (17-18/30): elfutils 37% [=======- ] 1.6 MB/s | 4.4 MB 00:04 ETA (17/30): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 267 kB/s | 14 kB 00:00 (18-19/30): elfutils 38% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (18/30): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 538 kB/s | 15 kB 00:00 (19-20/30): binutils 38% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (19/30): pkgconf-1.4.1-1.fc27.riscv64.rpm 625 kB/s | 35 kB 00:00 (20-21/30): binutils 39% [=======- ] 1.6 MB/s | 4.7 MB 00:04 ETA (20/30): libpkgconf-1.4.1-1.fc27.riscv64.rpm 589 kB/s | 74 kB 00:00 (21-22/30): binutils 42% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (21/30): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 300 kB/s | 7.5 kB 00:00 (22-23/30): binutils 42% [========- ] 1.6 MB/s | 5.0 MB 00:04 ETA (22/30): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 211 kB/s | 8.2 kB 00:00 (23-24/30): binutils 43% [========- ] 1.6 MB/s | 5.1 MB 00:04 ETA (23/30): gnat-srpm-macros-4-5.fc28.noarch.rpm 326 kB/s | 8.8 kB 00:00 (24-25/30): binutils 43% [========- ] 1.6 MB/s | 5.1 MB 00:04 ETA (24/30): elfutils-0.170-4.fc28.riscv64.rpm 537 kB/s | 791 kB 00:01 (25-26/30): go-srpm- 43% [========- ] 1.6 MB/s | 5.2 MB 00:04 ETA (25/30): go-srpm-macros-2-11.fc28.noarch.rpm 58 kB/s | 8.4 kB 00:00 (26/30): binutils-2. 43% [========- ] 1.6 MB/s | 5.2 MB 00:04 ETA (26/30): perl-srpm-macros-1-26.fc28.noarch.rpm 162 kB/s | 9.7 kB 00:00 (27-28/30): python-s 44% [========- ] 1.6 MB/s | 5.3 MB 00:04 ETA (27/30): python-srpm-macros-3-26.fc28.noarch.rp 144 kB/s | 10 kB 00:00 (28/30): binutils-2. 44% [========- ] 1.6 MB/s | 5.3 MB 00:04 ETA (28/30): dwz-0.12-5.fc28.riscv64.rpm 705 kB/s | 108 kB 00:00 (29-30/30): zip-3.0- 47% [========= ] 1.6 MB/s | 5.6 MB 00:03 ETA (29/30): zip-3.0-20.fc28.riscv64.rpm 785 kB/s | 271 kB 00:00 (30/30): binutils-2. 49% [=========- ] 1.6 MB/s | 5.9 MB 00:03 ETA (30/30): binutils-2. 55% [=========== ] 1.6 MB/s | 6.6 MB 00:03 ETA (30/30): binutils-2. 60% [============ ] 1.6 MB/s | 7.1 MB 00:02 ETA (30/30): binutils-2. 64% [============- ] 1.6 MB/s | 7.7 MB 00:02 ETA (30/30): binutils-2. 69% [=============- ] 1.6 MB/s | 8.2 MB 00:02 ETA (30/30): binutils-2. 73% [==============- ] 1.6 MB/s | 8.7 MB 00:01 ETA (30/30): binutils-2. 78% [===============- ] 1.6 MB/s | 9.2 MB 00:01 ETA (30/30): binutils-2. 82% [================- ] 1.6 MB/s | 9.8 MB 00:01 ETA (30/30): binutils-2. 86% [================= ] 1.6 MB/s | 10 MB 00:00 ETA (30/30): binutils-2. 90% [================== ] 1.6 MB/s | 11 MB 00:00 ETA (30/30): binutils-2. 95% [=================== ] 1.6 MB/s | 11 MB 00:00 ETA (30/30): binutils-2. 99% [===================-] 1.7 MB/s | 12 MB 00:00 ETA (30/30): binutils-2.30-1.fc28.riscv64.rpm 1.2 MB/s | 6.9 MB 00:05 -------------------------------------------------------------------------------- Total 1.4 MB/s | 12 MB 00:08 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Failed to obtain the transaction lock (logged in as: root). The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: Could not run transaction. ++ cleanup ++ set +e ++ sync ++ sleep 5 ++ sync ++ mount.static -o remount,ro / ++ poweroff reboot: Power down Power off