OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 07:11:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/miredo.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pppwfP + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf miredo-1.2.6 + /usr/bin/xz -dc /builddir/build/SOURCES/miredo-1.2.6.tar.xz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd miredo-1.2.6 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (miredo-config-not-exec):' Patch #0 (miredo-config-not-exec): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file misc/client-hook.iproute patching file misc/miredo.conf-in + echo 'Patch #1 (reread-resolv-before-resolv-ipv4.patch):' Patch #1 (reread-resolv-before-resolv-ipv4.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file libteredo/maintain.c + autoconf + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.twhgFD + umask 022 + cd /builddir/build/BUILD + cd miredo-1.2.6 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./admin/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./admin/config.sub ++ basename ./admin/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./admin/config.sub '/usr/lib/rpm/redhat/config.sub' -> './admin/config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./admin/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./admin/config.guess ++ basename ./admin/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./admin/config.guess '/usr/lib/rpm/redhat/config.guess' -> './admin/config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./admin/ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-rpath --enable-miredo-user configure: checking system... checking for build hostname... stage4-builder checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu configure: checking required programs... checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for gcc option to accept ISO C99... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking for gawk... gawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking whether make supports nested variables... yes configure: checking required libraries... checking for /proc/self/maps... yes checking whether everything is installed to the same prefix... no checking whether binary relocation support should be enabled... no checking whether NLS is requested... yes checking for msgfmt... no checking for gmsgfmt... : checking for xgettext... no checking for msgmerge... no checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for clock_gettime in -lrt... yes checking for library containing socket... none required checking for library containing inet_ntop... none required checking for res_init in -lresolv... no checking which hook scripts to use... iproute checking for pthread_create in -lpthread... yes configure: checking header files... checking whether to enable assertions... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking net/if_tun.h usability... no checking net/if_tun.h presence... no checking for net/if_tun.h... no checking net/tun/if_tun.h usability... no checking net/tun/if_tun.h presence... no checking for net/tun/if_tun.h... no checking for net/if_var.h... no configure: checking target characteristics... checking if gcc accepts -Wall... yes checking if gcc accepts -Wextra... yes checking if gcc accepts -Wundef... yes checking if gcc accepts -Wpointer-arith... yes checking if gcc accepts -Wbad-function-cast... yes checking if gcc accepts -Wcast-align... yes checking if gcc accepts -Wwrite-strings... yes checking if gcc accepts -Waggregate-return... yes checking if gcc accepts -Wstrict-prototypes... yes checking if gcc accepts -Wold-style-definition... yes checking if gcc accepts -Wmissing-prototypes... yes checking if gcc accepts -Wmissing-noreturn... yes checking if gcc accepts -Wpacked... yes checking if gcc accepts -Wnested-externs... yes checking if gcc accepts -Wredundant-decls... yes checking if gcc accepts -Wvolatile-register-var... yes checking whether byte ordering is bigendian... no checking if struct sockaddr has a sa_len member... no checking for clockid_t... random: crng init done yes configure: checking library functions... checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking for library containing getopt_long... none required checking for devname_r... no checking for kldload... no checking for pthread_condattr_setclock... yes checking for timer_create... yes checking for clearenv... yes checking for closefrom... no checking for strlcpy... no checking for clock_gettime... yes checking for clock_nanosleep... yes checking for fdatasync... yes configure: checking optional features... checking sys/capability.h usability... yes checking sys/capability.h presence... yes checking for sys/capability.h... yes checking for cap_set_proc in -lcap... yes checking Judy.h usability... yes checking Judy.h presence... yes checking for Judy.h... yes checking for JudyHSIns in -lJudy... yes checking whether to build for test coverage... no checking whether to include Teredo client support... yes checking user to run as... miredo configure: writing results... configure: creating ./config.status config.status: creating Makefile config.status: creating m4/Makefile config.status: creating doc/Makefile config.status: creating misc/Makefile config.status: creating compat/Makefile config.status: creating libtun6/Makefile config.status: creating libteredo/Makefile config.status: creating libteredo/test/Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating Doxyfile config.status: creating config.h config.status: executing libtool commands config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile + sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool + sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool + make -j2 make all-recursive make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6' Making all in po make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/po' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/po' Making all in doc make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/doc' SED miredo.8 SED miredo-server.8 SED miredo-checkconf.8 make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/doc' Making all in misc make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/misc' CAT client-hook SED miredo.conf SED miredo-server.conf SED miredo.service make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/misc' Making all in compat make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/compat' CC dummy.lo CC closefrom.lo CC strlcpy.lo CCLD libcompat.la make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/compat' Making all in libteredo make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making all in . make[3]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' CC init.lo CC relay.lo In file included from init.c:27:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from relay.c:29:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC security.lo CC md5.lo md5.c: In function 'md5_process': md5.c:181:7: warning: cast increases required alignment of target type [-Wcast-align] X = (const md5_word_t *)data; ^ CC packets.lo In file included from packets.c:29:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ packets.c: In function 'teredo_parse_ra': packets.c:209:5: warning: cast increases required alignment of target type [-Wcast-align] (const struct nd_opt_prefix_info *)hdr; ^ packets.c:229:34: warning: cast increases required alignment of target type [-Wcast-align] const struct nd_opt_mtu *mo = (const struct nd_opt_mtu *)hdr; ^ CC peerlist.lo CC clock.lo peerlist.c: In function 'teredo_list_create': peerlist.c:291:23: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] memset (l, 0, sizeof (l)); ^ peerlist.c: In function 'teredo_list_reset': peerlist.c:339:11: warning: variable 'Rc_word' set but not used [-Wunused-but-set-variable] intptr_t Rc_word; ^~~~~~~ peerlist.c: In function 'teredo_list_lookup': peerlist.c:452:7: warning: variable 'Rc_int' set but not used [-Wunused-but-set-variable] int Rc_int; ^~~~~~ CC stub.lo CC maintain.lo CC teredo.lo In file included from maintain.c:29:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ teredo.c: In function 'teredo_recv_inner': teredo.c:221:5: warning: cast increases required alignment of target type [-Wcast-align] (struct in_pktinfo *)CMSG_DATA (cmsg); ^ teredo.c:300:11: warning: cast increases required alignment of target type [-Wcast-align] p->ip6 = (struct ip6_hdr *)ptr; ^ maintain.c: In function 'getipv4byname': maintain.c:119:11: warning: cast increases required alignment of target type [-Wcast-align] *ipv4 = ((const struct sockaddr_in *)(res->ai_addr))->sin_addr.s_addr; ^ CC v4global.lo CC server.lo CC mire.o In file included from server.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CCLD libteredo-common.la CCLD libteredo.la CCLD libteredo-server.la CCLD teredo-mire make[3]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making all in test make[3]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making all in libtun6 make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' CC tun6.lo CC diag.lo In file included from tun6.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from diag.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diag.c: In function 'tun6_driver_diagnose': diag.c:142:2: warning: ignoring return value of 'strerror_r', declared with attribute warn_unused_result [-Wunused-result] strerror_r (errno, buf, sizeof (buf)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CCLD libtun6.la make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' Making all in src make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/src' CC main.lo CC miredo.lo In file included from main.c:27:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from miredo.c:29:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC conf.lo CC binreloc.lo In file included from conf.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ conf.c: In function 'GetIPv4ByName': conf.c:406:11: warning: cast increases required alignment of target type [-Wcast-align] *ipv4 = ((const struct sockaddr_in *)res->ai_addr)->sin_addr.s_addr; ^ conf.c: In function 'miredo_conf_parse_IPv6': conf.c:462:19: warning: cast increases required alignment of target type [-Wcast-align] memcpy (value, &((const struct sockaddr_in6*)(res->ai_addr))->sin6_addr, ^ CC privproc.o CC relayd.o In file included from relayd.c:27:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC serverd.o In file included from serverd.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC checkconf.o CCLD libmiredo.la In file included from checkconf.c:26:0: ../include/gettext.h:185:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcpgettext_expr': ../include/gettext.h:209:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:224:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h: In function 'dcnpgettext_expr': ../include/gettext.h:255:5: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../include/gettext.h:270:6: warning: this use of "defined" may not be portable [-Wexpansion-to-defined] #if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CCLD miredo-privproc CCLD miredo CCLD miredo-server CCLD miredo-checkconf make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/src' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4GaJCN + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 + cd miredo-1.2.6 + rm -rf /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 + make install DESTDIR=/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 'INSTALL=install -p' Making install in po make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/po' installing en.gmo as /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/locale/en/LC_MESSAGES/miredo.mo installing en_GB.gmo as /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/locale/en_GB/LC_MESSAGES/miredo.mo installing fr.gmo as /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/locale/fr/LC_MESSAGES/miredo.mo installing zh_CN.gmo as /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/locale/zh_CN/LC_MESSAGES/miredo.mo if test "miredo" = "gettext-tools"; then \ /usr/bin/mkdir -p /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ install -p -m 644 ./$file \ /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/po' Making install in doc make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/doc' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/doc' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man1' install -p -m 644 teredo-mire.1 '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man5' install -p -m 644 miredo.conf.5 miredo-server.conf.5 '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man5' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man8' install -p -m 644 miredo.8 miredo-server.8 miredo-checkconf.8 '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/man/man8' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/doc' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/doc' Making install in misc make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/misc' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/misc' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/etc/miredo' install -p client-hook '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/etc/miredo' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo/examples' install -p -m 644 miredo.conf miredo-server.conf '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo/examples' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/systemd/system' install -p -m 644 miredo.service '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/systemd/system' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/misc' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/misc' Making install in compat make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/compat' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/compat' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/compat' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/compat' Making install in libteredo make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making install in . make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' make[3]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64' /bin/sh ../libtool --mode=install install -p libteredo.la '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64' libtool: install: install -p .libs/libteredo.so.5.0.0 /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libteredo.so.5.0.0 libtool: install: (cd /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64 && { ln -s -f libteredo.so.5.0.0 libteredo.so.5 || { rm -f libteredo.so.5 && ln -s libteredo.so.5.0.0 libteredo.so.5; }; }) libtool: install: (cd /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64 && { ln -s -f libteredo.so.5.0.0 libteredo.so || { rm -f libteredo.so && ln -s libteredo.so.5.0.0 libteredo.so; }; }) libtool: install: install -p .libs/libteredo.lai /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libteredo.la libtool: install: warning: remember to run `libtool --finish /usr/lib64' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/bin' /bin/sh ../libtool --mode=install install -p teredo-mire '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/bin' libtool: install: warning: `libteredo.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/teredo-mire /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/bin/teredo-mire /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/include/libteredo' install -p -m 644 teredo.h teredo-udp.h tunnel.h '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/include/libteredo' make[3]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making install in test make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[3]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo/test' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libteredo' Making install in libtun6 make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64' /bin/sh ../libtool --mode=install install -p libtun6.la '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64' libtool: install: install -p .libs/libtun6.so.0.1.1 /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libtun6.so.0.1.1 libtool: install: (cd /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64 && { ln -s -f libtun6.so.0.1.1 libtun6.so.0 || { rm -f libtun6.so.0 && ln -s libtun6.so.0.1.1 libtun6.so.0; }; }) libtool: install: (cd /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64 && { ln -s -f libtun6.so.0.1.1 libtun6.so || { rm -f libtun6.so && ln -s libtun6.so.0.1.1 libtun6.so; }; }) libtool: install: install -p .libs/libtun6.lai /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libtun6.la libtool: install: warning: remember to run `libtool --finish /usr/lib64' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/include/libtun6' install -p -m 644 tun6.h '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/include/libtun6' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/libtun6' Making install in src make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/src' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6/src' /bin/sh /builddir/build/BUILD/miredo-1.2.6/admin/install-sh -d "/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/var/run" /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/libexec/miredo' /bin/sh ../libtool --mode=install install -p miredo-privproc '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/libexec/miredo' libtool: install: warning: `../libteredo/libteredo.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/miredo-privproc /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/libexec/miredo/miredo-privproc /usr/bin/mkdir -p '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/sbin' /bin/sh ../libtool --mode=install install -p miredo miredo-server miredo-checkconf '/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/sbin' libtool: install: warning: `../libtun6/libtun6.la' has not been installed in `/usr/lib64' libtool: install: warning: `../libteredo/libteredo.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/miredo /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/sbin/miredo libtool: install: install -p miredo-server /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/sbin/miredo-server libtool: install: install -p miredo-checkconf /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/sbin/miredo-checkconf make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/src' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6/src' make[1]: Entering directory '/builddir/build/BUILD/miredo-1.2.6' make[2]: Entering directory '/builddir/build/BUILD/miredo-1.2.6' make[2]: Nothing to be done for 'install-exec-am'. make install-data-hook make[3]: Entering directory '/builddir/build/BUILD/miredo-1.2.6' ************************ * Miredo configuration * ************************ An example configuration file has been installed at: /usr/share/doc/miredo/examples/miredo.conf No pre-existing configuration file for Miredo could be found, so the example as been copied as /etc/miredo/miredo.conf too. Please take time to review the settings and adjust them if necessary. Once finished, save the file as: /etc/miredo/miredo.conf and run miredo (as root). make[3]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6' make[2]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6' make[1]: Leaving directory '/builddir/build/BUILD/miredo-1.2.6' + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 miredo + mkdir rpmdocs + mv /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo/examples rpmdocs/ + mkdir -p /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib/systemd/system + install -p -m 644 /builddir/build/SOURCES/miredo-client.service /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib/systemd/system/miredo-client.service + install -p -m 644 /builddir/build/SOURCES/miredo-server.service /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib/systemd/system/miredo-server.service + rm -f /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libteredo.la /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/libtun6.la + rm -f /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/lib64/systemd/system/miredo.service + touch /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/etc/miredo/miredo-server.conf + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: miredo-libs-1.2.6-5.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.T44Tnn + umask 022 + cd /builddir/build/BUILD + cd miredo-1.2.6 + DOCDIR=/builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr AUTHORS /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr ChangeLog /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr COPYING /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr NEWS /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr README /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr THANKS /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr TODO /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + cp -pr rpmdocs/examples /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64/usr/share/doc/miredo-libs + exit 0 Provides: libteredo.so.5()(64bit) libtun6.so.0()(64bit) miredo-libs = 1.2.6-5.fc28 miredo-libs(riscv-64) = 1.2.6-5.fc28 Requires(interp): /bin/sh /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(pre): /bin/sh shadow-utils Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libJudy.so.1()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) librt.so.1()(64bit) librt.so.1(GLIBC_2.27)(64bit) rtld(GNU_HASH) Processing files: miredo-devel-1.2.6-5.fc28.riscv64 Provides: miredo-devel = 1.2.6-5.fc28 miredo-devel(riscv-64) = 1.2.6-5.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libteredo.so.5()(64bit) libtun6.so.0()(64bit) Processing files: miredo-server-1.2.6-5.fc28.riscv64 Provides: config(miredo-server) = 1.2.6-5.fc28 miredo-server = 1.2.6-5.fc28 miredo-server(riscv-64) = 1.2.6-5.fc28 Requires(interp): /bin/sh /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh systemd-sysv systemd-units Requires(preun): /bin/sh systemd-units Requires(postun): /bin/sh systemd-units Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libcap.so.2()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) libteredo.so.5()(64bit) rtld(GNU_HASH) Processing files: miredo-client-1.2.6-5.fc28.riscv64 Provides: config(miredo-client) = 1.2.6-5.fc28 miredo = 1.2.6-5.fc28 miredo-client = 1.2.6-5.fc28 miredo-client(riscv-64) = 1.2.6-5.fc28 Requires(interp): /bin/sh /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh systemd-sysv systemd-units Requires(preun): /bin/sh systemd-units Requires(postun): /bin/sh systemd-units Requires: /bin/sh ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libcap.so.2()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) librt.so.1()(64bit) libteredo.so.5()(64bit) libtun6.so.0()(64bit) rtld(GNU_HASH) Obsoletes: miredo <= 1.1.6 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /builddir/build/SRPMS/miredo-1.2.6-5.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/miredo-libs-1.2.6-5.fc28.riscv64.rpm Wrote: /builddir/build/RPMS/riscv64/miredo-devel-1.2.6-5.fc28.riscv64.rpm Wrote: /builddir/build/RPMS/riscv64/miredo-server-1.2.6-5.fc28.riscv64.rpm Wrote: /builddir/build/RPMS/riscv64/miredo-client-1.2.6-5.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9W44hQ + umask 022 + cd /builddir/build/BUILD + cd miredo-1.2.6 + rm -rf /builddir/build/BUILDROOT/miredo-1.2.6-5.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off