OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 07:01:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/minicom.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5Ac1oc + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf minicom-2.7 + /usr/bin/gzip -dc /builddir/build/SOURCES/minicom-2.7.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd minicom-2.7 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + cp -pr doc doc_ + rm -f doc_/Makefile.am doc_/Makefile.in + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.IziSLp + umask 022 + cd /builddir/build/BUILD + cd minicom-2.7 + autoreconf --verbose --force --install autoreconf: Entering directory `.' autoreconf: running: autopoint --force Creating directory m4 Copying file m4/codeset.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longdouble.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/uintmax_t.m4 Copying file m4/ulonglong.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed autoreconf: running: aclocal --force -I m4 aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:17: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS ../../lib/autoconf/specific.m4:436: AC_AIX is expanded from... configure.in:17: the top level autoreconf: configure.in: tracing configure.in:17: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS ../../lib/autoconf/specific.m4:436: AC_AIX is expanded from... configure.in:17: the top level autoreconf: configure.in: not using Libtool autoreconf: running: /usr/bin/autoconf --force configure.in:17: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS ../../lib/autoconf/specific.m4:436: AC_AIX is expanded from... configure.in:17: the top level autoreconf: running: /usr/bin/autoheader --force configure.in:17: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS ../../lib/autoconf/specific.m4:436: AC_AIX is expanded from... configure.in:17: the top level autoreconf: running: automake --add-missing --copy --force-missing automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:17: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS ../../lib/autoconf/specific.m4:436: AC_AIX is expanded from... configure.in:17: the top level configure.in:123: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. configure.in:123: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, configure.in:123: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' autoreconf: Leaving directory `.' + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for riscv64-redhat-linux-gnu-ar... no checking for riscv64-redhat-linux-gnu-lib... no checking for riscv64-redhat-linux-gnu-link... no checking for ar... ar checking the archiver (ar) interface... ar checking how to run the C preprocessor... gcc -Erandom: crng init done checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking for library containing strerror... none required checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking for riscv64-redhat-linux-gnu-pkg-config... /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for LOCKDEV... yes checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for kermit... no checking for tputs in -ltinfo... yes checking termcap.h usability... yes checking termcap.h presence... yes checking for termcap.h... yes checking for socket in -lsocket... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking whether stat file-mode macros are broken... no checking whether time.h and sys/time.h may both be included... yes checking POSIX termios... yes checking whether termios.h defines TIOCGWINSZ... no checking whether sys/ioctl.h defines TIOCGWINSZ... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking varargs.h usability... no checking varargs.h presence... no checking for varargs.h... no checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking setjmp.h usability... yes checking setjmp.h presence... yes checking for setjmp.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sgtty.h usability... yes checking sgtty.h presence... yes checking for sgtty.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for sys/stat.h... (cached) yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/ttold.h usability... no checking sys/ttold.h presence... no checking for sys/ttold.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for unistd.h... (cached) yes checking posix1_lim.h usability... no checking posix1_lim.h presence... no checking for posix1_lim.h... no checking for sgtty.h... (cached) yes checking features.h usability... yes checking features.h presence... yes checking for features.h... yes checking for an ANSI C-conforming const... yes checking for uid_t in sys/types.h... yes checking for mode_t... yes checking for pid_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking return type of signal handlers... void checking for error_at_line... yes checking whether closedir returns void... no checking if malloc debugging is wanted... no checking for getcwd... yes checking for getwd... yes checking for memmove... yes checking for strerror... yes checking for strstr... yes checking for vsnprintf... yes checking for vprintf... yes checking for select... yes checking for snprintf... yes checking for usleep... yes checking for getopt... yes checking for getopt_long... yes checking for long file names... yes checking for com line lock directory... /var/lock checking for default serial port device... /dev/modem checking for default baud rate... 115200 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating extras/Makefile config.status: creating extras/linux/Makefile config.status: creating extras/tables/Makefile config.status: creating extras/termcap/Makefile config.status: creating extras/terminfo/Makefile config.status: creating man/Makefile config.status: creating lib/Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating minicom.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile + make -j2 make all-recursive make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7' Making all in doc make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/doc' Making all in extras make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras' Making all in linux make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/linux' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/linux' Making all in tables make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/tables' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/tables' Making all in termcap make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' Making all in terminfo make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras' Making all in man make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/man' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/man' Making all in po make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/po' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/po' Making all in lib make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/lib' rm -f libport.a ar cru libport.a ranlib libport.a make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/lib' Making all in src make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/src' gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o minicom.o minicom.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o vt100.o vt100.c minicom.c: In function 'scrollback': minicom.c:492:22: warning: this statement may fall through [-Wimplicit-fallthrough=] case_matters = 0; /* case-importance, ie. none :-) */ ~~~~~~~~~~~~~^~~ minicom.c:497:7: note: here case '/': ^~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o config.o config.c config.c: In function 'doserial': config.c:538:9: warning: unused variable 'lockfile_location' [-Wunused-variable] char *lockfile_location = _(" B - Lockfile Location :"); ^~~~~~~~~~~~~~~~~ config.c: In function 'domodem': config.c:706:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:708:7: note: here case 'N': ^~~~ config.c:709:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:711:7: note: here case 'O': ^~~~ config.c:712:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:714:7: note: here case 'P': ^~~~ config.c:718:14: warning: this statement may fall through [-Wimplicit-fallthrough=] maxl = 4; ~~~~~^~~ config.c:719:7: note: here case 'K': ^~~~ config.c:720:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:722:7: note: here case 'L': ^~~~ config.c:726:11: warning: this statement may fall through [-Wimplicit-fallthrough=] c += 3; ~~^~~~ config.c:727:7: note: here case 'A': ^~~~ config.c:728:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:730:7: note: here case 'B': ^~~~ config.c:731:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:733:7: note: here case 'C': ^~~~ config.c:734:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:736:7: note: here case 'D': ^~~~ config.c:737:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:739:7: note: here case 'E': ^~~~ config.c:740:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:742:7: note: here case 'F': ^~~~ config.c:743:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:745:7: note: here case 'G': ^~~~ config.c:746:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:748:7: note: here case 'H': ^~~~ config.c:749:12: warning: this statement may fall through [-Wimplicit-fallthrough=] if (string_size == 0) ^ config.c:751:7: note: here case 'I': ^~~~ config.c: In function 'update_bbp_from_char': config.c:1511:13: warning: this statement may fall through [-Wimplicit-fallthrough=] delta = 1; ~~~~~~^~~ config.c:1512:5: note: here case 'B': ^~~~ config.c:1514:10: warning: this statement may fall through [-Wimplicit-fallthrough=] if (speed_idx < 0) ^ config.c:1519:5: note: here case 'C': ^~~~ config.c:1522:10: warning: this statement may fall through [-Wimplicit-fallthrough=] if (c == 'C') ^ config.c:1528:5: note: here case 'K': ^~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o help.o help.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o updown.o updown.c updown.c: In function 'runscript': updown.c:704:23: warning: '%d' directive writing between 1 and 6 bytes into a region of size 5 [-Wformat-overflow=] sprintf(scr_lines, "%d", (int) lines); /* jl 13.09.97 */ ^~ updown.c:704:22: note: directive argument in the range [-32768, 32767] sprintf(scr_lines, "%d", (int) lines); /* jl 13.09.97 */ ^~~~ In file included from /usr/include/stdio.h:862:0, from port.h:57, from updown.c:34: /usr/include/bits/stdio2.h:33:10: note: '__builtin___sprintf_chk' output between 2 and 7 bytes into a destination of size 5 return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ updown.c:720:44: warning: ' ' directive output may be truncated writing 1 byte into a region of size between 0 and 127 [-Wformat-truncation=] snprintf(cmdline, sizeof(cmdline), "%s %s %s %s", ^ In file included from /usr/include/stdio.h:862:0, from port.h:57, from updown.c:34: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output 4 or more bytes (assuming 131) into a destination of size 128 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o util.o util.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o dial.o dial.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o window.o window.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o wkeys.o wkeys.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o ipc.o ipc.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o windiv.o windiv.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o sysdep1.o sysdep1.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o sysdep1_s.o sysdep1_s.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o sysdep2.o sysdep2.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o rwconf.o rwconf.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o main.o main.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o file.o file.c main.c: In function 'open_term': main.c:190:7: warning: unused variable 'pid' [-Wunused-variable] int pid; ^~~ main.c:189:7: warning: unused variable 'fd' [-Wunused-variable] int fd, n = 0; ^~ main.c:188:5: warning: unused variable 'buf' [-Wunused-variable] } buf; ^~~ main.c:184:15: warning: unused variable 'stt' [-Wunused-variable] struct stat stt; ^~~ At top level: main.c:50:14: warning: 'mdevlockname' defined but not used [-Wunused-function] static char *mdevlockname(char *s, char *res, int reslen) ^~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o getsdir.o getsdir.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o wildmat.o wildmat.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o common.o common.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o script.o script.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DCONFDIR=\"/etc\" -DLOCALEDIR=\"/usr/share/locale\" -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -c -o ascii-xfr.o ascii-xfr.c gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o minicom minicom.o vt100.o config.o help.o updown.o util.o dial.o window.o wkeys.o ipc.o windiv.o sysdep1.o sysdep1_s.o sysdep2.o rwconf.o main.o file.o getsdir.o wildmat.o common.o ../lib/libport.a -llockdev -ltinfo gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o ascii-xfr ascii-xfr.o ../lib/libport.a -ltinfo gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -W -Wall -Wextra -std=gnu99 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o runscript script.o sysdep1_s.o common.o ../lib/libport.a -ltinfo make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/src' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mhDiPS + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 + cd minicom-2.7 + make DESTDIR=/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 install Making install in doc make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/doc' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/doc' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/doc' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/doc' Making install in extras make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras' Making install in linux make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/linux' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/linux' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/linux' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/linux' Making install in tables make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/tables' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/tables' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/tables' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/tables' Making install in termcap make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/termcap' Making install in terminfo make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras/terminfo' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras' make[3]: Entering directory '/builddir/build/BUILD/minicom-2.7/extras' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/extras' Making install in man make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/man' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/man' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/man/man1' /usr/bin/install -c -m 644 ascii-xfr.1 minicom.1 runscript.1 xminicom.1 '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/man/man1' make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/man' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/man' Making install in po make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/po' /usr/bin/mkdir -p /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share installing cs.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/cs/LC_MESSAGES/minicom.mo installing da.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/da/LC_MESSAGES/minicom.mo installing de.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/de/LC_MESSAGES/minicom.mo installing es.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/es/LC_MESSAGES/minicom.mo installing fr.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/fr/LC_MESSAGES/minicom.mo installing fi.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/fi/LC_MESSAGES/minicom.mo installing hu.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/hu/LC_MESSAGES/minicom.mo installing id.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/id/LC_MESSAGES/minicom.mo installing ja.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/ja/LC_MESSAGES/minicom.mo installing nb.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/nb/LC_MESSAGES/minicom.mo installing pl.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/pl/LC_MESSAGES/minicom.mo installing pt_BR.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/pt_BR/LC_MESSAGES/minicom.mo installing ro.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/ro/LC_MESSAGES/minicom.mo installing ru.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/ru/LC_MESSAGES/minicom.mo installing rw.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/rw/LC_MESSAGES/minicom.mo installing sv.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/sv/LC_MESSAGES/minicom.mo installing vi.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/vi/LC_MESSAGES/minicom.mo installing zh_TW.gmo as /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/locale/zh_TW/LC_MESSAGES/minicom.mo if test "minicom" = "gettext-tools"; then \ /usr/bin/mkdir -p /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/po' Making install in lib make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/lib' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/lib' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/lib' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/lib' Making install in src make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7/src' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7/src' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/bin' /usr/bin/install -c minicom runscript ascii-xfr '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/bin' /usr/bin/install -c xminicom '/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/bin' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7/src' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7/src' make[1]: Entering directory '/builddir/build/BUILD/minicom-2.7' make[2]: Entering directory '/builddir/build/BUILD/minicom-2.7' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/minicom-2.7' make[1]: Leaving directory '/builddir/build/BUILD/minicom-2.7' + mkdir -p /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/etc + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 minicom + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: minicom-2.7-6.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.4NAUTO + umask 022 + cd /builddir/build/BUILD + cd minicom-2.7 + DOCDIR=/builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + cp -pr ChangeLog /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + cp -pr AUTHORS /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + cp -pr NEWS /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + cp -pr TODO /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + cp -pr doc_/Announce-1.78 doc_/Announce-1.82 doc_/Announce-1.82.1 doc_/Announce-1.83 doc_/COMPATABILITY.lrzsz doc_/ChangeLog.old doc_/HistSearch doc_/Locales doc_/Macros doc_/QuickStart.modemu doc_/README.lrzsz doc_/TODO.lrzsz doc_/Todo doc_/Todo.175 doc_/Todo.Irix.dif doc_/Todo.emacskey.dif doc_/Todo.fsel doc_/copyright.modemu doc_/fselector.txt doc_/japanese doc_/minicom.FAQ doc_/minirc.dfl doc_/modemu.README doc_/pl-translation.txt doc_/portugues-brasil doc_/suomeksi /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64/usr/share/doc/minicom + exit 0 Provides: minicom = 2.7-6.fc28 minicom(riscv-64) = 2.7-6.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /bin/sh ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) liblockdev.so.1()(64bit) libtinfo.so.6()(64bit) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /builddir/build/SRPMS/minicom-2.7-6.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/minicom-2.7-6.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Nm7MsH + umask 022 + cd /builddir/build/BUILD + cd minicom-2.7 + /usr/bin/rm -rf /builddir/build/BUILDROOT/minicom-2.7-6.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off