OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 05:09:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/memcached-1.4.33-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/memcached.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [= ] 2.8 MB/s | 847 kB 00:03 ETA Local RPMS 14% [==- ] 2.8 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 2.8 MB/s | 2.7 MB 00:03 ETA Local RPMS 30% [====== ] 2.8 MB/s | 3.5 MB 00:02 ETA Local RPMS 38% [=======- ] 2.8 MB/s | 4.5 MB 00:02 ETA Local RPMS 47% [=========- ] 2.9 MB/s | 5.5 MB 00:02 ETA Local RPMS 56% [=========== ] 2.9 MB/s | 6.6 MB 00:01 ETA Local RPMS 59% [===========- ] 2.7 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [=============- ] 2.7 MB/s | 7.9 MB 00:01 ETA Local RPMS 76% [=============== ] 2.8 MB/s | 8.9 MB 00:00 ETA Local RPMS 84% [================- ] 2.8 MB/s | 9.9 MB 00:00 ETA Local RPMS 93% [==================- ] 2.8 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 12 MB 00:04 Last metadata expiration check: 0:01:31 ago on Thu Feb 22 05:09:34 2018. Package systemd-235-0.3.riscv64.noarch is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: cyrus-sasl-devel riscv64 2.1.26-37.fc28 local 332 k libevent-devel riscv64 2.0.22-6.fc28 local 90 k perl-Test-Harness noarch 1:3.39-4.fc27 local 276 k perl-Test-Simple noarch 1:1.302103-1.fc27 local 485 k perl-generators noarch 1.10-6.fc27 local 16 k Installing dependencies: cyrus-sasl riscv64 2.1.26-37.fc28 local 140 k cyrus-sasl-lib riscv64 2.1.26-37.fc28 local 320 k libevent riscv64 2.0.22-6.fc28 local 540 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-Fedora-VSP noarch 0.001-8.fc27 local 23 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M Transaction Summary ================================================================================ Install 48 Packages Total download size: 25 M Installed size: 85 M Downloading Packages: (1/48): cyrus-sasl-d 0% [ ] --- B/s | 0 B --:-- ETA (1/48): perl-generators-1.10-6.fc27.noarch.rpm 226 kB/s | 16 kB 00:00 (2-3/48): cyrus-sasl 0% [ ] 1.1 MB/s | 112 kB 00:22 ETA (2/48): cyrus-sasl-2.1.26-37.fc28.riscv64.rpm 694 kB/s | 140 kB 00:00 (3-4/48): cyrus-sasl 1% [ ] 1.1 MB/s | 395 kB 00:21 ETA (3/48): perl-Fedora-VSP-0.001-8.fc27.noarch.rpm 439 kB/s | 23 kB 00:00 (4-5/48): cyrus-sasl 1% [ ] 1.1 MB/s | 514 kB 00:21 ETA (4/48): libevent-devel-2.0.22-6.fc28.riscv64.rp 756 kB/s | 90 kB 00:00 (5-6/48): cyrus-sasl 3% [- ] 1.2 MB/s | 828 kB 00:20 ETA (5/48): cyrus-sasl-devel-2.1.26-37.fc28.riscv64 593 kB/s | 332 kB 00:00 (6-7/48): libevent-2 3% [- ] 1.2 MB/s | 905 kB 00:20 ETA (6/48): cyrus-sasl-lib-2.1.26-37.fc28.riscv64.r 579 kB/s | 320 kB 00:00 (7-8/48): perl-Test- 4% [- ] 1.2 MB/s | 1.0 MB 00:20 ETA (7/48): perl-Test-Harness-3.39-4.fc27.noarch.rp 724 kB/s | 276 kB 00:00 (8-9/48): perl-Test- 6% [= ] 1.2 MB/s | 1.7 MB 00:19 ETA (8/48): perl-Carp-1.42-408.fc27.0.riscv64.noarc 789 kB/s | 84 kB 00:00 (9-10/48): perl-Test 7% [=- ] 1.3 MB/s | 2.0 MB 00:18 ETA (9/48): perl-Exporter-5.72-408.fc27.0.riscv64.n 870 kB/s | 87 kB 00:00 (10-11/48): perl-Tes 8% [=- ] 1.3 MB/s | 2.2 MB 00:17 ETA (10/48): libevent-2.0.22-6.fc28.riscv64.rpm 620 kB/s | 540 kB 00:00 (11-12/48): perl-Fil 9% [=- ] 1.3 MB/s | 2.4 MB 00:17 ETA (11/48): perl-Test-Simple-1.302103-1.fc27.noarc 642 kB/s | 485 kB 00:00 (12-13/48): perl-Fil 9% [=- ] 1.3 MB/s | 2.4 MB 00:18 ETA (12/48): perl-File-Temp-0.230.400-408.fc27.0.ri 340 kB/s | 103 kB 00:00 (13-14/48): perl-Ter 10% [== ] 1.3 MB/s | 2.5 MB 00:17 ETA (13/48): perl-Term-ANSIColor-4.06-408.fc27.0.ri 397 kB/s | 94 kB 00:00 (14-15/48): perl-Dat 10% [== ] 1.3 MB/s | 2.6 MB 00:17 ETA (14/48): perl-Data-Dumper-2.167-408.fc27.0.risc 584 kB/s | 149 kB 00:00 (15-16/48): perl-IO- 11% [== ] 1.3 MB/s | 2.9 MB 00:17 ETA (15/48): perl-IO-1.38-408.fc28.1.riscv64.riscv6 608 kB/s | 176 kB 00:00 (16-17/48): perl-Pat 12% [== ] 1.3 MB/s | 3.1 MB 00:17 ETA (16/48): perl-PathTools-3.67-408.fc27.0.riscv64 574 kB/s | 166 kB 00:00 (17-18/48): perl-Sca 12% [== ] 1.3 MB/s | 3.1 MB 00:17 ETA (17/48): perl-Scalar-List-Utils-1.48-1.fc27.ris 487 kB/s | 119 kB 00:00 (18-19/48): perl-Sto 12% [==- ] 1.3 MB/s | 3.2 MB 00:17 ETA (18/48): perl-Storable-2.62-408.fc27.0.riscv64. 623 kB/s | 205 kB 00:00 (19-20/48): perl-int 14% [==- ] 1.3 MB/s | 3.7 MB 00:16 ETA (19/48): perl-Errno-1.28-408.fc28.1.riscv64.ris 791 kB/s | 73 kB 00:00 (20-21/48): perl-int 15% [=== ] 1.3 MB/s | 3.9 MB 00:16 ETA (20/48): perl-threads-shared-1.58-1.fc27.riscv6 848 kB/s | 91 kB 00:00 (21-22/48): perl-lib 16% [=== ] 1.3 MB/s | 4.2 MB 00:15 ETA (21/48): perl-File-Path-2.15-1.fc27.noarch.rpm 659 kB/s | 37 kB 00:00 (22-23/48): perl-lib 17% [=== ] 1.3 MB/s | 4.3 MB 00:15 ETA (22/48): perl-Getopt-Long-2.50-3.fc27.noarch.rp 821 kB/s | 61 kB 00:00 (23-24/48): perl-lib 17% [===- ] 1.4 MB/s | 4.5 MB 00:15 ETA (23/48): perl-Text-ParseWords-3.30-408.fc27.0.r 789 kB/s | 73 kB 00:00 (24-25/48): perl-lib 18% [===- ] 1.4 MB/s | 4.7 MB 00:14 ETA (24/48): perl-constant-1.33-408.fc27.0.riscv64. 856 kB/s | 79 kB 00:00 (25-26/48): perl-lib 19% [===- ] 1.4 MB/s | 4.9 MB 00:14 ETA (25/48): perl-Socket-2.027-1.fc27.riscv64.rpm 883 kB/s | 95 kB 00:00 (26-27/48): perl-lib 20% [==== ] 1.4 MB/s | 5.2 MB 00:14 ETA (26/48): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 502 kB/s | 14 kB 00:00 (27-28/48): perl-lib 20% [==== ] 1.4 MB/s | 5.3 MB 00:14 ETA (27/48): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 608 kB/s | 15 kB 00:00 (28-29/48): perl-lib 21% [==== ] 1.4 MB/s | 5.3 MB 00:14 ETA (28/48): pkgconf-1.4.1-1.fc27.riscv64.rpm 642 kB/s | 35 kB 00:00 (29-30/48): perl-lib 21% [==== ] 1.4 MB/s | 5.4 MB 00:14 ETA (29/48): libpkgconf-1.4.1-1.fc27.riscv64.rpm 795 kB/s | 74 kB 00:00 (30-31/48): perl-lib 22% [====- ] 1.4 MB/s | 5.7 MB 00:13 ETA (30/48): python2-2.7.14-9.fc28.riscv64.rpm 870 kB/s | 107 kB 00:00 (31-32/48): perl-int 23% [====- ] 1.4 MB/s | 6.0 MB 00:13 ETA (31-33/48): perl-lib 27% [===== ] 1.5 MB/s | 6.9 MB 00:12 ETA (31-33/48): perl-lib 31% [====== ] 1.6 MB/s | 7.8 MB 00:10 ETA (31-33/48): perl-lib 34% [======- ] 1.7 MB/s | 8.8 MB 00:09 ETA (31-33/48): python2- 38% [=======- ] 1.8 MB/s | 9.7 MB 00:08 ETA (31-33/48): python2- 42% [========- ] 1.9 MB/s | 11 MB 00:07 ETA (31-33/48): python2- 46% [========= ] 2.0 MB/s | 12 MB 00:06 ETA (31-33/48): perl-int 50% [========== ] 2.0 MB/s | 13 MB 00:06 ETA (31/48): perl-libs-5.26.1-408.fc28.1.riscv64.ri 831 kB/s | 3.3 MB 00:04 (32-33/48): perl-int 51% [========== ] 1.9 MB/s | 13 MB 00:06 ETA (32/48): perl-macros-5.26.1-408.fc28.1.riscv64. 782 kB/s | 69 kB 00:00 (33-34/48): perl-int 52% [==========- ] 1.9 MB/s | 13 MB 00:06 ETA (33/48): perl-Pod-Usage-1.69-408.fc27.0.riscv64 850 kB/s | 89 kB 00:00 (34-35/48): perl-int 53% [==========- ] 1.9 MB/s | 14 MB 00:06 ETA (34/48): perl-parent-0.236-408.fc27.0.riscv64.n 796 kB/s | 71 kB 00:00 (35-36/48): python2- 54% [==========- ] 1.9 MB/s | 14 MB 00:05 ETA (35/48): perl-threads-2.21-1.fc27.riscv64.rpm 859 kB/s | 104 kB 00:00 (36-37/48): python2- 56% [=========== ] 1.9 MB/s | 14 MB 00:05 ETA (36/48): perl-Text-Tabs+Wrap-2013.0523-408.fc27 882 kB/s | 80 kB 00:00 (37-38/48): python2- 57% [=========== ] 1.9 MB/s | 14 MB 00:05 ETA (37/48): perl-Unicode-Normalize-1.25-408.fc27.0 881 kB/s | 164 kB 00:00 (38-39/48): python2- 59% [===========- ] 2.0 MB/s | 15 MB 00:05 ETA (38/48): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 900 kB/s | 139 kB 00:00 (39-40/48): python2- 60% [============ ] 2.0 MB/s | 15 MB 00:05 ETA (39/48): perl-podlators-4.09-408.fc27.0.riscv64 888 kB/s | 157 kB 00:00 (40-41/48): python2- 62% [============- ] 2.0 MB/s | 16 MB 00:04 ETA (40/48): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 800 kB/s | 97 kB 00:00 (41-42/48): perl-int 63% [============- ] 2.0 MB/s | 16 MB 00:04 ETA (41/48): perl-Pod-Simple-3.35-408.fc27.0.riscv6 940 kB/s | 271 kB 00:00 (42-43/48): perl-int 67% [============= ] 2.0 MB/s | 17 MB 00:04 ETA (42-44/48): perl-Enc 70% [============== ] 2.1 MB/s | 18 MB 00:03 ETA (42-44/48): perl-Enc 74% [==============- ] 2.1 MB/s | 19 MB 00:03 ETA (42-44/48): perl-int 78% [===============- ] 2.2 MB/s | 20 MB 00:02 ETA (42-44/48): perl-int 81% [================ ] 2.3 MB/s | 21 MB 00:02 ETA (42/48): perl-Encode-2.94-16.fc27.riscv64.rpm 954 kB/s | 1.4 MB 00:01 (43-44/48): python2- 84% [================- ] 2.2 MB/s | 21 MB 00:01 ETA (43/48): perl-Time-Local-1.250-394.fc27.noarch. 727 kB/s | 30 kB 00:00 (44-45/48): perl-int 84% [================- ] 2.2 MB/s | 21 MB 00:01 ETA (44/48): perl-MIME-Base64-3.15-408.fc27.0.riscv 892 kB/s | 111 kB 00:00 (45-46/48): perl-int 85% [================= ] 2.2 MB/s | 22 MB 00:01 ETA (45/48): perl-Term-Cap-1.17-408.fc27.0.riscv64. 828 kB/s | 78 kB 00:00 (46-47/48): perl-int 86% [================= ] 2.2 MB/s | 22 MB 00:01 ETA (46/48): perl-Pod-Escapes-1.07-408.fc27.0.riscv 845 kB/s | 77 kB 00:00 (47-48/48): perl-int 87% [=================- ] 2.2 MB/s | 22 MB 00:01 ETA (47/48): perl-interpreter-5.26.1-408.fc28.1.ris 781 kB/s | 6.7 MB 00:08 (48/48): python2-lib 90% [================== ] 1.9 MB/s | 23 MB 00:01 ETA (48/48): python2-lib 93% [==================- ] 2.0 MB/s | 24 MB 00:00 ETA (48/48): python2-lib 97% [===================-] 2.0 MB/s | 25 MB 00:00 ETA (48/48): python2-libs-2.7.14-9.fc28.riscv64.rpm 927 kB/s | 8.1 MB 00:08 -------------------------------------------------------------------------------- Total 1.9 MB/s | 25 MB 00:12 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/48 Installing : perl-Exporter-5.72-408.f [===== ] 1/48 Installing : perl-Exporter-5.72-408.f [======= ] 1/48 Installing : perl-Exporter-5.72-408.f [==================== ] 1/48 Installing : perl-Exporter-5.72-408.f [======================== ] 1/48 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/48 Installing : perl-libs-4:5.26.1-408.f [ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/48 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/48 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/48 Installing : perl-Carp-1.42-408.fc27. [ ] 3/48 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/48 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/48 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/48 Installing : perl-Scalar-List-Utils-3 [ ] 4/48 Installing : perl-Scalar-List-Utils-3 [= ] 4/48 Installing : perl-Scalar-List-Utils-3 [== ] 4/48 Installing : perl-Scalar-List-Utils-3 [=== ] 4/48 Installing : perl-Scalar-List-Utils-3 [===== ] 4/48 Installing : perl-Scalar-List-Utils-3 [======== ] 4/48 Installing : perl-Scalar-List-Utils-3 [========== ] 4/48 Installing : perl-Scalar-List-Utils-3 [============= ] 4/48 Installing : perl-Scalar-List-Utils-3 [================ ] 4/48 Installing : perl-Scalar-List-Utils-3 [================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/48 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/48 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/48 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/48 Installing : perl-Text-ParseWords-3.3 [ ] 5/48 Installing : perl-Text-ParseWords-3.3 [======= ] 5/48 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/48 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/48 Installing : perl-Term-ANSIColor-4.06 [ ] 6/48 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/48 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/48 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/48 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/48 random: crng init done Installing : perl-macros-4:5.26.1-408 [ ] 7/48 Installing : perl-macros-4:5.26.1-408 [======================== ] 7/48 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/48 Installing : perl-Errno-1.28-408.fc28 [ ] 8/48 Installing : perl-Errno-1.28-408.fc28 [================= ] 8/48 Installing : perl-Errno-1.28-408.fc28 [======================== ] 8/48 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 8/48 Installing : perl-File-Path-2.15-1.fc [ ] 9/48 Installing : perl-File-Path-2.15-1.fc [==== ] 9/48 Installing : perl-File-Path-2.15-1.fc [======== ] 9/48 Installing : perl-File-Path-2.15-1.fc [==================== ] 9/48 Installing : perl-File-Path-2.15-1.fc [======================== ] 9/48 Installing : perl-File-Path-2.15-1.fc27.noarch 9/48 Installing : perl-PathTools-3.67-408. [ ] 10/48 Installing : perl-PathTools-3.67-408. [== ] 10/48 Installing : perl-PathTools-3.67-408. [=== ] 10/48 Installing : perl-PathTools-3.67-408. [==== ] 10/48 Installing : perl-PathTools-3.67-408. [======= ] 10/48 Installing : perl-PathTools-3.67-408. [========= ] 10/48 Installing : perl-PathTools-3.67-408. [=========== ] 10/48 Installing : perl-PathTools-3.67-408. [============== ] 10/48 Installing : perl-PathTools-3.67-408. [================== ] 10/48 Installing : perl-PathTools-3.67-408. [==================== ] 10/48 Installing : perl-PathTools-3.67-408. [===================== ] 10/48 Installing : perl-PathTools-3.67-408. [====================== ] 10/48 Installing : perl-PathTools-3.67-408. [======================= ] 10/48 Installing : perl-PathTools-3.67-408. [======================== ] 10/48 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 10/48 Installing : perl-constant-1.33-408.f [ ] 11/48 Installing : perl-constant-1.33-408.f [======= ] 11/48 Installing : perl-constant-1.33-408.f [======================== ] 11/48 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 11/48 Installing : perl-IO-1.38-408.fc28.1. [ ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [= ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [=== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [==== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [===== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [====== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [======= ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [======== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [============== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [================= ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 12/48 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 12/48 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 12/48 Installing : perl-Socket-4:2.027-1.fc [ ] 13/48 Installing : perl-Socket-4:2.027-1.fc [=== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [======= ] 13/48 Installing : perl-Socket-4:2.027-1.fc [========== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [============== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [================= ] 13/48 Installing : perl-Socket-4:2.027-1.fc [==================== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [===================== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [====================== ] 13/48 Installing : perl-Socket-4:2.027-1.fc [======================= ] 13/48 Installing : perl-Socket-4:2.027-1.fc [======================== ] 13/48 Installing : perl-Socket-4:2.027-1.fc27.riscv64 13/48 Installing : perl-parent-1:0.236-408. [ ] 14/48 Installing : perl-parent-1:0.236-408. [============ ] 14/48 Installing : perl-parent-1:0.236-408. [======================== ] 14/48 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 14/48 Installing : perl-threads-shared-1.58 [ ] 15/48 Installing : perl-threads-shared-1.58 [=== ] 15/48 Installing : perl-threads-shared-1.58 [======= ] 15/48 Installing : perl-threads-shared-1.58 [========== ] 15/48 Installing : perl-threads-shared-1.58 [============== ] 15/48 Installing : perl-threads-shared-1.58 [================= ] 15/48 Installing : perl-threads-shared-1.58 [==================== ] 15/48 Installing : perl-threads-shared-1.58 [======================= ] 15/48 Installing : perl-threads-shared-1.58 [======================== ] 15/48 Installing : perl-threads-shared-1.58-1.fc27.riscv64 15/48 Installing : perl-threads-1:2.21-1.fc [ ] 16/48 Installing : perl-threads-1:2.21-1.fc [=== ] 16/48 Installing : perl-threads-1:2.21-1.fc [====== ] 16/48 Installing : perl-threads-1:2.21-1.fc [========= ] 16/48 Installing : perl-threads-1:2.21-1.fc [============= ] 16/48 Installing : perl-threads-1:2.21-1.fc [================ ] 16/48 Installing : perl-threads-1:2.21-1.fc [================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [===================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [====================== ] 16/48 Installing : perl-threads-1:2.21-1.fc [======================= ] 16/48 Installing : perl-threads-1:2.21-1.fc [======================== ] 16/48 Installing : perl-threads-1:2.21-1.fc27.riscv64 16/48 Installing : perl-Text-Tabs+Wrap-2013 [ ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 17/48 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 17/48 Installing : perl-interpreter-4:5.26. [ ] 18/48 Installing : perl-interpreter-4:5.26. [= ] 18/48 Installing : perl-interpreter-4:5.26. [== ] 18/48 Installing : perl-interpreter-4:5.26. [=== ] 18/48 Installing : perl-interpreter-4:5.26. [==== ] 18/48 Installing : perl-interpreter-4:5.26. [===== ] 18/48 Installing : perl-interpreter-4:5.26. [====== ] 18/48 Installing : perl-interpreter-4:5.26. [======= ] 18/48 Installing : perl-interpreter-4:5.26. [======== ] 18/48 Installing : perl-interpreter-4:5.26. [========= ] 18/48 Installing : perl-interpreter-4:5.26. [========== ] 18/48 Installing : perl-interpreter-4:5.26. [=========== ] 18/48 Installing : perl-interpreter-4:5.26. [============ ] 18/48 Installing : perl-interpreter-4:5.26. [============= ] 18/48 Installing : perl-interpreter-4:5.26. [============== ] 18/48 Installing : perl-interpreter-4:5.26. [=============== ] 18/48 Installing : perl-interpreter-4:5.26. [================ ] 18/48 Installing : perl-interpreter-4:5.26. [================= ] 18/48 Installing : perl-interpreter-4:5.26. [================== ] 18/48 Installing : perl-interpreter-4:5.26. [=================== ] 18/48 Installing : perl-interpreter-4:5.26. [==================== ] 18/48 Installing : perl-interpreter-4:5.26. [===================== ] 18/48 Installing : perl-interpreter-4:5.26. [====================== ] 18/48 Installing : perl-interpreter-4:5.26. [======================= ] 18/48 Installing : perl-interpreter-4:5.26. [======================== ] 18/48 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 18/48 Installing : perl-Unicode-Normalize-1 [ ] 19/48 Installing : perl-Unicode-Normalize-1 [= ] 19/48 Installing : perl-Unicode-Normalize-1 [== ] 19/48 Installing : perl-Unicode-Normalize-1 [=== ] 19/48 Installing : perl-Unicode-Normalize-1 [==== ] 19/48 Installing : perl-Unicode-Normalize-1 [===== ] 19/48 Installing : perl-Unicode-Normalize-1 [====== ] 19/48 Installing : perl-Unicode-Normalize-1 [======= ] 19/48 Installing : perl-Unicode-Normalize-1 [======== ] 19/48 Installing : perl-Unicode-Normalize-1 [========= ] 19/48 Installing : perl-Unicode-Normalize-1 [========== ] 19/48 Installing : perl-Unicode-Normalize-1 [============ ] 19/48 Installing : perl-Unicode-Normalize-1 [============= ] 19/48 Installing : perl-Unicode-Normalize-1 [============== ] 19/48 Installing : perl-Unicode-Normalize-1 [=============== ] 19/48 Installing : perl-Unicode-Normalize-1 [================ ] 19/48 Installing : perl-Unicode-Normalize-1 [================= ] 19/48 Installing : perl-Unicode-Normalize-1 [================== ] 19/48 Installing : perl-Unicode-Normalize-1 [=================== ] 19/48 Installing : perl-Unicode-Normalize-1 [==================== ] 19/48 Installing : perl-Unicode-Normalize-1 [===================== ] 19/48 Installing : perl-Unicode-Normalize-1 [====================== ] 19/48 Installing : perl-Unicode-Normalize-1 [======================= ] 19/48 Installing : perl-Unicode-Normalize-1 [======================== ] 19/48 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 19/48 Installing : perl-File-Temp-0.230.400 [ ] 20/48 Installing : perl-File-Temp-0.230.400 [=== ] 20/48 Installing : perl-File-Temp-0.230.400 [============ ] 20/48 Installing : perl-File-Temp-0.230.400 [===================== ] 20/48 Installing : perl-File-Temp-0.230.400 [======================== ] 20/48 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 20/48 Installing : perl-Storable-1:2.62-408 [ ] 21/48 Installing : perl-Storable-1:2.62-408 [== ] 21/48 Installing : perl-Storable-1:2.62-408 [==== ] 21/48 Installing : perl-Storable-1:2.62-408 [====== ] 21/48 Installing : perl-Storable-1:2.62-408 [======== ] 21/48 Installing : perl-Storable-1:2.62-408 [========== ] 21/48 Installing : perl-Storable-1:2.62-408 [============ ] 21/48 Installing : perl-Storable-1:2.62-408 [============== ] 21/48 Installing : perl-Storable-1:2.62-408 [================ ] 21/48 Installing : perl-Storable-1:2.62-408 [================== ] 21/48 Installing : perl-Storable-1:2.62-408 [==================== ] 21/48 Installing : perl-Storable-1:2.62-408 [====================== ] 21/48 Installing : perl-Storable-1:2.62-408 [======================== ] 21/48 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/48 Installing : python2-libs-2.7.14-9.fc [ ] 22/48 Installing : python2-libs-2.7.14-9.fc [= ] 22/48 Installing : python2-libs-2.7.14-9.fc [== ] 22/48 Installing : python2-libs-2.7.14-9.fc [=== ] 22/48 Installing : python2-libs-2.7.14-9.fc [==== ] 22/48 Installing : python2-libs-2.7.14-9.fc [===== ] 22/48 Installing : python2-libs-2.7.14-9.fc [====== ] 22/48 Installing : python2-libs-2.7.14-9.fc [======= ] 22/48 Installing : python2-libs-2.7.14-9.fc [======== ] 22/48 Installing : python2-libs-2.7.14-9.fc [========= ] 22/48 Installing : python2-libs-2.7.14-9.fc [========== ] 22/48 Installing : python2-libs-2.7.14-9.fc [=========== ] 22/48 Installing : python2-libs-2.7.14-9.fc [============ ] 22/48 Installing : python2-libs-2.7.14-9.fc [============= ] 22/48 Installing : python2-libs-2.7.14-9.fc [============== ] 22/48 Installing : python2-libs-2.7.14-9.fc [=============== ] 22/48 Installing : python2-libs-2.7.14-9.fc [================ ] 22/48 Installing : python2-libs-2.7.14-9.fc [================= ] 22/48 Installing : python2-libs-2.7.14-9.fc [================== ] 22/48 Installing : python2-libs-2.7.14-9.fc [=================== ] 22/48 Installing : python2-libs-2.7.14-9.fc [==================== ] 22/48 Installing : python2-libs-2.7.14-9.fc [===================== ] 22/48 Installing : python2-libs-2.7.14-9.fc [====================== ] 22/48 Installing : python2-libs-2.7.14-9.fc [======================= ] 22/48 Installing : python2-libs-2.7.14-9.fc [======================== ] 22/48 Installing : python2-libs-2.7.14-9.fc28.riscv64 22/48 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 22/48 Installing : python2-2.7.14-9.fc28.ri [ ] 23/48 Installing : python2-2.7.14-9.fc28.ri [====== ] 23/48 Installing : python2-2.7.14-9.fc28.ri [============== ] 23/48 Installing : python2-2.7.14-9.fc28.ri [==================== ] 23/48 Installing : python2-2.7.14-9.fc28.ri [======================= ] 23/48 Installing : python2-2.7.14-9.fc28.ri [======================== ] 23/48 Installing : python2-2.7.14-9.fc28.riscv64 23/48 Installing : cyrus-sasl-lib-2.1.26-37 [ ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [=== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [==== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [===== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [====== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [======= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [======== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [========= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [========== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [=========== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [============ ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [============= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [============== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [=============== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [================ ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [================= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [=================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [==================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [===================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [====================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [======================= ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37 [======================== ] 24/48 Installing : cyrus-sasl-lib-2.1.26-37.fc28.riscv64 24/48 Running scriptlet: cyrus-sasl-lib-2.1.26-37.fc28.riscv64 24/48 Running scriptlet: cyrus-sasl-2.1.26-37.fc28.riscv64 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [ ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [=== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [===== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [======== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [========== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [============ ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [=============== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [================= ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [=================== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [==================== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [====================== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [======================= ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc2 [======================== ] 25/48 Installing : cyrus-sasl-2.1.26-37.fc28.riscv64 25/48 Installing : perl-MIME-Base64-3.15-40 [ ] 26/48 Installing : perl-MIME-Base64-3.15-40 [= ] 26/48 Installing : perl-MIME-Base64-3.15-40 [== ] 26/48 Installing : perl-MIME-Base64-3.15-40 [========== ] 26/48 Installing : perl-MIME-Base64-3.15-40 [================== ] 26/48 Installing : perl-MIME-Base64-3.15-40 [======================= ] 26/48 Installing : perl-MIME-Base64-3.15-40 [======================== ] 26/48 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 26/48 Installing : perl-Term-Cap-1.17-408.f [ ] 27/48 Installing : perl-Term-Cap-1.17-408.f [==== ] 27/48 Installing : perl-Term-Cap-1.17-408.f [======================== ] 27/48 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 27/48 Installing : perl-Pod-Escapes-1:1.07- [ ] 28/48 Installing : perl-Pod-Escapes-1:1.07- [==== ] 28/48 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 28/48 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 28/48 Installing : perl-Time-Local-1:1.250- [ ] 29/48 Installing : perl-Time-Local-1:1.250- [= ] 29/48 Installing : perl-Time-Local-1:1.250- [===== ] 29/48 Installing : perl-Time-Local-1:1.250- [======== ] 29/48 Installing : perl-Time-Local-1:1.250- [========= ] 29/48 Installing : perl-Time-Local-1:1.250- [================= ] 29/48 Installing : perl-Time-Local-1:1.250- [=================== ] 29/48 Installing : perl-Time-Local-1:1.250- [======================== ] 29/48 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 29/48 Installing : perl-HTTP-Tiny-0.070-408 [ ] 30/48 Installing : perl-HTTP-Tiny-0.070-408 [== ] 30/48 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 30/48 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 30/48 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 30/48 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 30/48 Installing : perl-Pod-Simple-1:3.35-4 [ ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 31/48 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 31/48 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 31/48 Installing : perl-Encode-4:2.94-16.fc [ ] 32/48 Installing : perl-Encode-4:2.94-16.fc [= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [=== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [==== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [===== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [====== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [======= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [======== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [========= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [========== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [=========== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [============ ] 32/48 Installing : perl-Encode-4:2.94-16.fc [============= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [============== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [=============== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [================ ] 32/48 Installing : perl-Encode-4:2.94-16.fc [================= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [=================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [==================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [===================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [====================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc [======================= ] 32/48 Installing : perl-Encode-4:2.94-16.fc [======================== ] 32/48 Installing : perl-Encode-4:2.94-16.fc27.riscv64 32/48 Installing : perl-Getopt-Long-1:2.50- [ ] 33/48 Installing : perl-Getopt-Long-1:2.50- [=== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [==== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [===== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [====== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [======= ] 33/48 Installing : perl-Getopt-Long-1:2.50- [========= ] 33/48 Installing : perl-Getopt-Long-1:2.50- [=============== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [===================== ] 33/48 Installing : perl-Getopt-Long-1:2.50- [======================== ] 33/48 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 33/48 Installing : perl-Pod-Usage-4:1.69-40 [ ] 34/48 Installing : perl-Pod-Usage-4:1.69-40 [== ] 34/48 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 34/48 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 34/48 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 34/48 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 34/48 Installing : perl-podlators-4.09-408. [ ] 35/48 Installing : perl-podlators-4.09-408. [= ] 35/48 Installing : perl-podlators-4.09-408. [== ] 35/48 Installing : perl-podlators-4.09-408. [=== ] 35/48 Installing : perl-podlators-4.09-408. [==== ] 35/48 Installing : perl-podlators-4.09-408. [===== ] 35/48 Installing : perl-podlators-4.09-408. [====== ] 35/48 Installing : perl-podlators-4.09-408. [======= ] 35/48 Installing : perl-podlators-4.09-408. [=========== ] 35/48 Installing : perl-podlators-4.09-408. [=============== ] 35/48 Installing : perl-podlators-4.09-408. [================ ] 35/48 Installing : perl-podlators-4.09-408. [================= ] 35/48 Installing : perl-podlators-4.09-408. [===================== ] 35/48 Installing : perl-podlators-4.09-408. [====================== ] 35/48 Installing : perl-podlators-4.09-408. [======================= ] 35/48 Installing : perl-podlators-4.09-408. [======================== ] 35/48 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 35/48 Installing : perl-Pod-Perldoc-3.28-40 [ ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [= ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 36/48 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 36/48 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 36/48 Installing : perl-Data-Dumper-2.167-4 [ ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [==== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [============ ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=============== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [=================== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [====================== ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======================= ] 37/48 Installing : perl-Data-Dumper-2.167-4 [======================== ] 37/48 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 37/48 Installing : perl-Fedora-VSP-0.001-8. [ ] 38/48 Installing : perl-Fedora-VSP-0.001-8. [=================== ] 38/48 Installing : perl-Fedora-VSP-0.001-8. [===================== ] 38/48 Installing : perl-Fedora-VSP-0.001-8. [====================== ] 38/48 Installing : perl-Fedora-VSP-0.001-8. [======================== ] 38/48 Installing : perl-Fedora-VSP-0.001-8.fc27.noarch 38/48 Installing : libpkgconf-1.4.1-1.fc27. [ ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 39/48 Installing : libpkgconf-1.4.1-1.fc27.riscv64 39/48 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 39/48 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 40/48 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 40/48 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 40/48 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 40/48 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 40/48 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 40/48 Installing : pkgconf-1.4.1-1.fc27.riscv64 40/48 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 41/48 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 41/48 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 41/48 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 41/48 Installing : pkgconf-pkg-config-1.4.1 [ ] 42/48 Installing : pkgconf-pkg-config-1.4.1 [==== ] 42/48 Installing : pkgconf-pkg-config-1.4.1 [===== ] 42/48 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 42/48 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 42/48 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 42/48 Installing : libevent-2.0.22-6.fc28.r [ ] 43/48 Installing : libevent-2.0.22-6.fc28.r [= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [=== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [==== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [===== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [====== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [======= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [======== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [========= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [========== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [=========== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [============ ] 43/48 Installing : libevent-2.0.22-6.fc28.r [============= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [============== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [=============== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [================ ] 43/48 Installing : libevent-2.0.22-6.fc28.r [================= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [================== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [=================== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [==================== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [===================== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [====================== ] 43/48 Installing : libevent-2.0.22-6.fc28.r [======================= ] 43/48 Installing : libevent-2.0.22-6.fc28.r [======================== ] 43/48 Installing : libevent-2.0.22-6.fc28.riscv64 43/48 Running scriptlet: libevent-2.0.22-6.fc28.riscv64 43/48 Installing : libevent-devel-2.0.22-6. [ ] 44/48 Installing : libevent-devel-2.0.22-6. [== ] 44/48 Installing : libevent-devel-2.0.22-6. [=== ] 44/48 Installing : libevent-devel-2.0.22-6. [==== ] 44/48 Installing : libevent-devel-2.0.22-6. [====== ] 44/48 Installing : libevent-devel-2.0.22-6. [======== ] 44/48 Installing : libevent-devel-2.0.22-6. [========= ] 44/48 Installing : libevent-devel-2.0.22-6. [========== ] 44/48 Installing : libevent-devel-2.0.22-6. [=========== ] 44/48 Installing : libevent-devel-2.0.22-6. [============ ] 44/48 Installing : libevent-devel-2.0.22-6. [=============== ] 44/48 Installing : libevent-devel-2.0.22-6. [================ ] 44/48 Installing : libevent-devel-2.0.22-6. [================== ] 44/48 Installing : libevent-devel-2.0.22-6. [=================== ] 44/48 Installing : libevent-devel-2.0.22-6. [===================== ] 44/48 Installing : libevent-devel-2.0.22-6. [====================== ] 44/48 Installing : libevent-devel-2.0.22-6. [======================== ] 44/48 Installing : libevent-devel-2.0.22-6.fc28.riscv64 44/48 Installing : cyrus-sasl-devel-2.1.26- [ ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [=== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [==== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [===== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [====== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [======= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [======== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [========= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [========== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [=========== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [============ ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [============= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [============== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [=============== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [================ ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [================= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [=================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [==================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [===================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [====================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [======================= ] 45/48 Installing : cyrus-sasl-devel-2.1.26- [======================== ] 45/48 Installing : cyrus-sasl-devel-2.1.26-37.fc28.riscv64 45/48 Installing : perl-generators-1.10-6.f [ ] 46/48 Installing : perl-generators-1.10-6.f [======== ] 46/48 Installing : perl-generators-1.10-6.f [===================== ] 46/48 Installing : perl-generators-1.10-6.f [======================= ] 46/48 Installing : perl-generators-1.10-6.f [======================== ] 46/48 Installing : perl-generators-1.10-6.fc27.noarch 46/48 Installing : perl-Test-Simple-1:1.302 [ ] 47/48 Installing : perl-Test-Simple-1:1.302 [= ] 47/48 Installing : perl-Test-Simple-1:1.302 [== ] 47/48 Installing : perl-Test-Simple-1:1.302 [=== ] 47/48 Installing : perl-Test-Simple-1:1.302 [==== ] 47/48 Installing : perl-Test-Simple-1:1.302 [===== ] 47/48 Installing : perl-Test-Simple-1:1.302 [====== ] 47/48 Installing : perl-Test-Simple-1:1.302 [======= ] 47/48 Installing : perl-Test-Simple-1:1.302 [======== ] 47/48 Installing : perl-Test-Simple-1:1.302 [========= ] 47/48 Installing : perl-Test-Simple-1:1.302 [========== ] 47/48 Installing : perl-Test-Simple-1:1.302 [=========== ] 47/48 Installing : perl-Test-Simple-1:1.302 [============ ] 47/48 Installing : perl-Test-Simple-1:1.302 [============= ] 47/48 Installing : perl-Test-Simple-1:1.302 [============== ] 47/48 Installing : perl-Test-Simple-1:1.302 [=============== ] 47/48 Installing : perl-Test-Simple-1:1.302 [================ ] 47/48 Installing : perl-Test-Simple-1:1.302 [================= ] 47/48 Installing : perl-Test-Simple-1:1.302 [================== ] 47/48 Installing : perl-Test-Simple-1:1.302 [=================== ] 47/48 Installing : perl-Test-Simple-1:1.302 [==================== ] 47/48 Installing : perl-Test-Simple-1:1.302 [===================== ] 47/48 Installing : perl-Test-Simple-1:1.302 [====================== ] 47/48 Installing : perl-Test-Simple-1:1.302 [======================= ] 47/48 Installing : perl-Test-Simple-1:1.302 [======================== ] 47/48 Installing : perl-Test-Simple-1:1.302103-1.fc27.noarch 47/48 Installing : perl-Test-Harness-1:3.39 [ ] 48/48 Installing : perl-Test-Harness-1:3.39 [= ] 48/48 Installing : perl-Test-Harness-1:3.39 [== ] 48/48 Installing : perl-Test-Harness-1:3.39 [=== ] 48/48 Installing : perl-Test-Harness-1:3.39 [==== ] 48/48 Installing : perl-Test-Harness-1:3.39 [===== ] 48/48 Installing : perl-Test-Harness-1:3.39 [====== ] 48/48 Installing : perl-Test-Harness-1:3.39 [======= ] 48/48 Installing : perl-Test-Harness-1:3.39 [======== ] 48/48 Installing : perl-Test-Harness-1:3.39 [========= ] 48/48 Installing : perl-Test-Harness-1:3.39 [========== ] 48/48 Installing : perl-Test-Harness-1:3.39 [=========== ] 48/48 Installing : perl-Test-Harness-1:3.39 [============ ] 48/48 Installing : perl-Test-Harness-1:3.39 [============= ] 48/48 Installing : perl-Test-Harness-1:3.39 [============== ] 48/48 Installing : perl-Test-Harness-1:3.39 [=============== ] 48/48 Installing : perl-Test-Harness-1:3.39 [================= ] 48/48 Installing : perl-Test-Harness-1:3.39 [================== ] 48/48 Installing : perl-Test-Harness-1:3.39 [=================== ] 48/48 Installing : perl-Test-Harness-1:3.39 [==================== ] 48/48 Installing : perl-Test-Harness-1:3.39 [===================== ] 48/48 Installing : perl-Test-Harness-1:3.39 [====================== ] 48/48 Installing : perl-Test-Harness-1:3.39 [======================= ] 48/48 Installing : perl-Test-Harness-1:3.39 [======================== ] 48/48 Installing : perl-Test-Harness-1:3.39-4.fc27.noarch 48/48 Running scriptlet: perl-Test-Harness-1:3.39-4.fc27.noarch 48/48 Verifying : cyrus-sasl-devel-2.1.26-37.fc28.riscv64 1/48 Verifying : perl-generators-1.10-6.fc27.noarch 2/48 Verifying : cyrus-sasl-2.1.26-37.fc28.riscv64 3/48 Verifying : cyrus-sasl-lib-2.1.26-37.fc28.riscv64 4/48 Verifying : perl-Fedora-VSP-0.001-8.fc27.noarch 5/48 Verifying : libevent-devel-2.0.22-6.fc28.riscv64 6/48 Verifying : libevent-2.0.22-6.fc28.riscv64 7/48 Verifying : perl-Test-Harness-1:3.39-4.fc27.noarch 8/48 Verifying : perl-Test-Simple-1:1.302103-1.fc27.noarch 9/48 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 10/48 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 11/48 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 12/48 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 13/48 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 14/48 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 15/48 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/48 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 17/48 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 18/48 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 19/48 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 20/48 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 21/48 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 22/48 Verifying : perl-File-Path-2.15-1.fc27.noarch 23/48 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 24/48 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 25/48 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 26/48 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 27/48 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 28/48 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 29/48 Verifying : pkgconf-1.4.1-1.fc27.riscv64 30/48 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 31/48 Verifying : python2-2.7.14-9.fc28.riscv64 32/48 Verifying : python2-libs-2.7.14-9.fc28.riscv64 33/48 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 34/48 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 35/48 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 36/48 Verifying : perl-threads-1:2.21-1.fc27.riscv64 37/48 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 38/48 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 39/48 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 40/48 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 41/48 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 42/48 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 43/48 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 44/48 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 45/48 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 46/48 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 47/48 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 48/48 Installed: cyrus-sasl-devel.riscv64 2.1.26-37.fc28 libevent-devel.riscv64 2.0.22-6.fc28 perl-Test-Harness.noarch 1:3.39-4.fc27 perl-Test-Simple.noarch 1:1.302103-1.fc27 perl-generators.noarch 1.10-6.fc27 cyrus-sasl.riscv64 2.1.26-37.fc28 cyrus-sasl-lib.riscv64 2.1.26-37.fc28 libevent.riscv64 2.0.22-6.fc28 libpkgconf.riscv64 1.4.1-1.fc27 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-Fedora-VSP.noarch 0.001-8.fc27 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:05:21 ago on Thu Feb 22 05:09:34 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:05:40 ago on Thu Feb 22 05:09:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group cpio sed util-linux gzip findutils unzip tar which rpm-build redhat-rpm-config coreutils bash info xz fedora-release gawk diffutils grep bzip2 make shadow-utils patch ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 27 Packages Total download size: 12 M Installed size: 50 M Downloading Packages: (1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/27): make-4.2.1 6% [= ] 2.6 MB/s | 799 kB 00:04 ETA (1/27): make-4.2.1-6.fc27.riscv64.rpm 940 kB/s | 486 kB 00:00 (2-3/27): tar-1.29-7 11% [== ] 2.6 MB/s | 1.4 MB 00:04 ETA (2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 861 kB/s | 75 kB 00:00 (3-4/27): tar-1.29-7 13% [==- ] 2.6 MB/s | 1.7 MB 00:04 ETA (3/27): diffutils-3.6-3.fc28.riscv64.rpm 756 kB/s | 577 kB 00:00 (4-5/27): tar-1.29-7 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA (4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 75 kB/s | 7.6 kB 00:00 (5/27): tar-1.29-7.f 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA (5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 181 kB/s | 7.8 kB 00:00 (6-7/27): tar-1.29-7 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA (6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 168 kB/s | 6.6 kB 00:00 (7/27): tar-1.29-7.f 13% [==- ] 2.5 MB/s | 1.7 MB 00:04 ETA (7/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 207 kB/s | 9.0 kB 00:00 (8-9/27): tar-1.29-7 14% [==- ] 2.5 MB/s | 1.8 MB 00:04 ETA (8/27): rust-srpm-macros-5-1.fc28.noarch.rpm 205 kB/s | 8.0 kB 00:00 (9/27): tar-1.29-7.f 14% [==- ] 2.5 MB/s | 1.8 MB 00:04 ETA (9/27): tar-1.29-7.fc27.riscv64.rpm 627 kB/s | 805 kB 00:01 (10-11/27): zstd-1.3 18% [===- ] 2.4 MB/s | 2.3 MB 00:04 ETA (10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 608 kB/s | 235 kB 00:00 (11-12/27): which-2. 19% [===- ] 2.4 MB/s | 2.4 MB 00:04 ETA (11/27): which-2.21-4.fc28.riscv64.rpm 428 kB/s | 65 kB 00:00 (12-13/27): patch-2. 20% [==== ] 2.4 MB/s | 2.5 MB 00:04 ETA (12/27): patch-2.7.5-6.fc27.riscv64.rpm 817 kB/s | 270 kB 00:00 (13-14/27): unzip-6. 25% [===== ] 2.4 MB/s | 3.2 MB 00:03 ETA (13/27): unzip-6.0-36.fc28.riscv64.rpm 839 kB/s | 398 kB 00:00 (14-15/27): xz-5.2.3 29% [=====- ] 2.4 MB/s | 3.7 MB 00:03 ETA (14/27): xz-5.2.3-5.fc28.riscv64.rpm 693 kB/s | 212 kB 00:00 (15-16/27): bzip2-1. 31% [====== ] 2.4 MB/s | 3.9 MB 00:03 ETA (15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 496 kB/s | 81 kB 00:00 (16-17/27): elfutils 31% [====== ] 2.3 MB/s | 3.9 MB 00:03 ETA (16/27): file-5.32-3.fc28.riscv64.rpm 777 kB/s | 81 kB 00:00 (17-18/27): zstd-1.3 33% [======- ] 2.3 MB/s | 4.2 MB 00:03 ETA (17-19/27): elfutils 40% [======== ] 2.4 MB/s | 5.1 MB 00:03 ETA (17/27): zstd-1.3.3-1.fc27.riscv64.rpm 680 kB/s | 1.1 MB 00:01 (18-19/27): elfutils 40% [======== ] 2.4 MB/s | 5.1 MB 00:03 ETA (18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 313 kB/s | 7.5 kB 00:00 (19-20/27): elfutils 41% [======== ] 2.3 MB/s | 5.1 MB 00:03 ETA (19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 343 kB/s | 8.2 kB 00:00 (20-21/27): elfutils 41% [======== ] 2.3 MB/s | 5.2 MB 00:03 ETA (20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 368 kB/s | 8.8 kB 00:00 (21-22/27): elfutils 41% [======== ] 2.3 MB/s | 5.2 MB 00:03 ETA (21/27): go-srpm-macros-2-11.fc28.noarch.rpm 346 kB/s | 8.4 kB 00:00 (22-23/27): elfutils 42% [======== ] 2.3 MB/s | 5.2 MB 00:03 ETA (22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 407 kB/s | 9.7 kB 00:00 (23-24/27): elfutils 42% [======== ] 2.3 MB/s | 5.3 MB 00:03 ETA (23/27): python-srpm-macros-3-26.fc28.noarch.rp 422 kB/s | 10 kB 00:00 (24-25/27): elfutils 42% [========- ] 2.3 MB/s | 5.3 MB 00:03 ETA (24/27): dwz-0.12-5.fc28.riscv64.rpm 871 kB/s | 108 kB 00:00 (25-26/27): elfutils 45% [========= ] 2.3 MB/s | 5.7 MB 00:02 ETA (25/27): elfutils-0.170-4.fc28.riscv64.rpm 599 kB/s | 791 kB 00:01 (26-27/27): zip-3.0- 49% [=========- ] 2.2 MB/s | 6.1 MB 00:02 ETA (26/27): zip-3.0-20.fc28.riscv64.rpm 775 kB/s | 271 kB 00:00 (27/27): binutils-2. 50% [========== ] 2.2 MB/s | 6.3 MB 00:02 ETA (27/27): binutils-2. 57% [===========- ] 2.3 MB/s | 7.2 MB 00:02 ETA (27/27): binutils-2. 65% [============= ] 2.3 MB/s | 8.1 MB 00:01 ETA (27/27): binutils-2. 72% [============== ] 2.4 MB/s | 9.0 MB 00:01 ETA (27/27): binutils-2. 79% [===============- ] 2.4 MB/s | 9.9 MB 00:01 ETA (27/27): binutils-2. 86% [================= ] 2.4 MB/s | 11 MB 00:00 ETA (27/27): binutils-2. 93% [==================- ] 2.5 MB/s | 12 MB 00:00 ETA (27/27): binutils-2.30-1.fc28.riscv64.rpm 1.7 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.9 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 1/27 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv64 2/27 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 3/27 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 4/27 Installing : python-srpm-macros-3-26. [ ] 5/27 Installing : python-srpm-macros-3-26. [======================= ] 5/27 Installing : python-srpm-macros-3-26.fc28.noarch 5/27 Installing : perl-srpm-macros-1-26.fc [ ] 6/27 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27 Installing : perl-srpm-macros-1-26.fc28.noarch 6/27 Installing : go-srpm-macros-2-11.fc28 [ ] 7/27 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27 Installing : go-srpm-macros-2-11.fc28.noarch 7/27 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27 Installing : binutils-2.30-1.fc28.ris [ ] 11/27 Installing : binutils-2.30-1.fc28.ris [= ] 11/27 Installing : binutils-2.30-1.fc28.ris [== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======== ] 11/27 Installing : binutils-2.30-1.fc28.ris [========= ] 11/27 Installing : binutils-2.30-1.fc28.ris [========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [============ ] 11/27 Installing : binutils-2.30-1.fc28.ris [============= ] 11/27 Installing : binutils-2.30-1.fc28.ris [============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [================ ] 11/27 Installing : binutils-2.30-1.fc28.ris [================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27 Installing : binutils-2.30-1.fc28.riscv64 11/27 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27 Installing : elfutils-0.170-4.fc28.ri [ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27 Installing : elfutils-0.170-4.fc28.riscv64 12/27 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.riscv64 13/27 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 14/27 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv64 15/27 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv64 16/27 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27 Installing : rust-srpm-macros-5-1.fc28.noarch 17/27 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27 Installing : openblas-srpm-macros-2-2 [ ] 19/27 Installing : openblas-srpm-macros-2-2 [================ ] 19/27 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27 Installing : nim-srpm-macros-1-1.fc28.noarch 21/27 Installing : redhat-rpm-config-96-1.f [ ] 22/27 Installing : redhat-rpm-config-96-1.f [== ] 22/27 Installing : redhat-rpm-config-96-1.f [=== ] 22/27 Installing : redhat-rpm-config-96-1.f [========= ] 22/27 Installing : redhat-rpm-config-96-1.f [=========== ] 22/27 Installing : redhat-rpm-config-96-1.f [================= ] 22/27 Installing : redhat-rpm-config-96-1.f [================== ] 22/27 Installing : redhat-rpm-config-96-1.f [=================== ] 22/27 Installing : redhat-rpm-config-96-1.f [===================== ] 22/27 Installing : redhat-rpm-config-96-1.f [====================== ] 22/27 Installing : redhat-rpm-config-96-1.f [======================== ] 22/27 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27 Installing : diffutils-3.6-3.fc28.ris [ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27 Installing : diffutils-3.6-3.fc28.riscv64 23/27 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv64 24/27 Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27 Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27 Installing : which-2.21-4.fc28.riscv6 [ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27 Installing : which-2.21-4.fc28.riscv64 26/27 Running scriptlet: which-2.21-4.fc28.riscv64 26/27 Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27 Installing : make-1:4.2.1-6.fc27.riscv64 27/27 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27 Verifying : tar-2:1.29-7.fc27.riscv64 1/27 Verifying : diffutils-3.6-3.fc28.riscv64 2/27 Verifying : make-1:4.2.1-6.fc27.riscv64 3/27 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27 Verifying : zstd-1.3.3-1.fc27.riscv64 11/27 Verifying : which-2.21-4.fc28.riscv64 12/27 Verifying : patch-2.7.5-6.fc27.riscv64 13/27 Verifying : unzip-6.0-36.fc28.riscv64 14/27 Verifying : xz-5.2.3-5.fc28.riscv64 15/27 Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27 Verifying : elfutils-0.170-4.fc28.riscv64 17/27 Verifying : file-5.32-3.fc28.riscv64 18/27 Verifying : binutils-2.30-1.fc28.riscv64 19/27 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27 Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27 Verifying : go-srpm-macros-2-11.fc28.noarch 23/27 Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27 Verifying : python-srpm-macros-3-26.fc28.noarch 25/27 Verifying : dwz-0.12-5.fc28.riscv64 26/27 Verifying : zip-3.0-20.fc28.riscv64 27/27 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:07:33 ago on Thu Feb 22 05:09:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 587 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 608 kB/s | 46 kB 00:04 ETA (2-4/4): kernel-head 36% [======= ] 750 kB/s | 942 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 823 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 801 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 88% [=================- ] 939 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 963 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 943 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 990 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off