OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 04:36:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/mcstrans-0.3.4-8.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/mcstrans.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.1 MB/s | 975 kB 00:03 ETA Local RPMS 15% [=== ] 3.1 MB/s | 1.8 MB 00:03 ETA Local RPMS 24% [====- ] 3.1 MB/s | 2.9 MB 00:02 ETA Local RPMS 33% [======- ] 3.2 MB/s | 4.0 MB 00:02 ETA Local RPMS 43% [========- ] 3.2 MB/s | 5.0 MB 00:02 ETA Local RPMS 51% [========== ] 3.2 MB/s | 6.0 MB 00:01 ETA Local RPMS 59% [===========- ] 3.0 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [=============- ] 3.0 MB/s | 7.9 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.9 MB 00:00 ETA Local RPMS 84% [================- ] 3.0 MB/s | 9.8 MB 00:00 ETA Local RPMS 92% [================== ] 3.0 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 12 MB 00:04 Last metadata expiration check: 0:01:30 ago on Thu Feb 22 04:36:34 2018. Package systemd-235-0.3.riscv64.noarch is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libcap-devel riscv64 2.25-7.fc28 local 31 k libselinux-devel riscv64 2.7-11.0.riscv64.fc28 local 196 k libsepol-devel riscv64 2.7-3.fc28 local 83 k libsepol-static riscv64 2.7-3.fc28 local 866 k pcre-devel riscv64 8.41-4.fc27 local 549 k Installing dependencies: libpkgconf riscv64 1.4.1-1.fc27 local 74 k pcre-cpp riscv64 8.41-4.fc27 local 111 k pcre-utf16 riscv64 8.41-4.fc27 local 245 k pcre-utf32 riscv64 8.41-4.fc27 local 232 k pcre2-devel riscv64 10.31-0.3.RC1.fc28.1 local 587 k pcre2-utf16 riscv64 10.31-0.3.RC1.fc28.1 local 296 k pcre2-utf32 riscv64 10.31-0.3.RC1.fc28.1 local 290 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k Transaction Summary ================================================================================ Install 15 Packages Total download size: 3.5 M Installed size: 14 M Downloading Packages: (1/15): libcap-devel 0% [ ] --- B/s | 0 B --:-- ETA (1/15): libcap-devel-2.25-7.fc28.riscv64.rpm 214 kB/s | 31 kB 00:00 (2-3/15): libsepol-d 3% [- ] 984 kB/s | 142 kB 00:03 ETA (2/15): libsepol-devel-2.7-3.fc28.riscv64.rpm 465 kB/s | 83 kB 00:00 (3-4/15): libsepol-s 5% [= ] 980 kB/s | 195 kB 00:03 ETA (3/15): libselinux-devel-2.7-11.0.riscv64.fc28. 548 kB/s | 196 kB 00:00 (4-5/15): pcre-devel 15% [=== ] 1.0 MB/s | 567 kB 00:02 ETA (4/15): pcre-cpp-8.41-4.fc27.riscv64.rpm 846 kB/s | 111 kB 00:00 (5-6/15): libsepol-s 24% [====- ] 1.0 MB/s | 903 kB 00:02 ETA (5/15): pcre-utf16-8.41-4.fc27.riscv64.rpm 916 kB/s | 245 kB 00:00 (6-7/15): libsepol-s 45% [========= ] 1.1 MB/s | 1.6 MB 00:01 ETA (6/15): pcre-devel-8.41-4.fc27.riscv64.rpm 710 kB/s | 549 kB 00:00 (7-8/15): libsepol-s 50% [========== ] 1.1 MB/s | 1.8 MB 00:01 ETA (7/15): pcre-utf32-8.41-4.fc27.riscv64.rpm 608 kB/s | 232 kB 00:00 (8-9/15): libsepol-s 65% [============= ] 1.2 MB/s | 2.3 MB 00:01 ETA (8/15): libsepol-static-2.7-3.fc28.riscv64.rpm 618 kB/s | 866 kB 00:01 (9-10/15): pcre2-utf 76% [=============== ] 1.2 MB/s | 2.7 MB 00:00 ETA (9/15): pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv6 593 kB/s | 296 kB 00:00 (10-11/15): pcre2-ut 89% [=================- ] 1.2 MB/s | 3.2 MB 00:00 ETA (10/15): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 504 kB/s | 14 kB 00:00 (11-12/15): pcre2-ut 90% [================== ] 1.2 MB/s | 3.2 MB 00:00 ETA (11/15): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 495 kB/s | 15 kB 00:00 (12-13/15): pcre2-ut 92% [================== ] 1.2 MB/s | 3.3 MB 00:00 ETA (12/15): pkgconf-1.4.1-1.fc27.riscv64.rpm 633 kB/s | 35 kB 00:00 (13-14/15): pcre2-ut 95% [=================== ] 1.2 MB/s | 3.4 MB 00:00 ETA (13/15): pcre2-devel-10.31-0.3.RC1.fc28.1.riscv 552 kB/s | 587 kB 00:01 (14-15/15): libpkgco 98% [===================-] 1.2 MB/s | 3.5 MB 00:00 ETA (14/15): pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv 507 kB/s | 290 kB 00:00 (15/15): libpkgconf- 99% [===================-] 1.2 MB/s | 3.5 MB 00:00 ETA (15/15): libpkgconf-1.4.1-1.fc27.riscv64.rpm 354 kB/s | 74 kB 00:00 -------------------------------------------------------------------------------- Total 1.5 MB/s | 3.5 MB 00:02 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [=== ] 1/1 Preparing : [====== ] 1/1 Preparing : [========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [================ ] 1/1 Preparing : [==================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : 1/1 Installing : libpkgconf-1.4.1-1.fc27. [ ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 1/15 Installing : libpkgconf-1.4.1-1.fc27.riscv64 1/15 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 1/15 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 2/15 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 2/15 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 2/15 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 2/15 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 2/15 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 2/15 Installing : pkgconf-1.4.1-1.fc27.riscv64 2/15 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 3/15 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 3/15 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 3/15 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 3/15 Installing : pkgconf-pkg-config-1.4.1 [ ] 4/15 Installing : pkgconf-pkg-config-1.4.1 [==== ] 4/15 Installing : pkgconf-pkg-config-1.4.1 [===== ] 4/15 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 4/15 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 4/15 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 4/15 Installing : libsepol-devel-2.7-3.fc2 [ ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [= ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [=== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [==== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [===== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [====== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [======= ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [======== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [========= ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [========== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [=========== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [============ ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [============= ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [============== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [=============== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [==================== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [===================== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [====================== ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [======================= ] 5/15 Installing : libsepol-devel-2.7-3.fc2 [======================== ] 5/15 Installing : libsepol-devel-2.7-3.fc28.riscv64 5/15 Installing : pcre2-utf32-10.31-0.3.RC [ ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [=== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [==== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [===== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [====== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [======= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [======== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [========= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [========== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [=========== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [============ ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [============= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [============== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [=============== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [================ ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [================= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [=================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [==================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [===================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [====================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [======================= ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC [======================== ] 6/15 Installing : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 6/15 Installing : pcre2-utf16-10.31-0.3.RC [ ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [=== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [==== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [===== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [====== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [======= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [======== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [========= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [========== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [=========== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [============ ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [============= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [============== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [=============== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [================ ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [================= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [=================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [==================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [===================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [====================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [======================= ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC [======================== ] 7/15 Installing : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 7/15 Installing : pcre2-devel-10.31-0.3.RC [ ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [=== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [==== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [===== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [====== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [======= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [======== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [========= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [========== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [=========== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [============ ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [============= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [============== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [=============== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [================ ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [================= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [=================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [==================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [===================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [====================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [======================= ] 8/15 Installing : pcre2-devel-10.31-0.3.RC [======================== ] 8/15 Installing : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 8/15 Installing : pcre-utf32-8.41-4.fc27.r [ ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [= ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [=== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [==== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [===== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [====== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [======= ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [======== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [========= ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [========== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [=========== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [============ ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [============= ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [============== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [=============== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [================ ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [=================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [==================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [===================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [====================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [======================= ] 9/15 Installing : pcre-utf32-8.41-4.fc27.r [======================== ] 9/15 Installing : pcre-utf32-8.41-4.fc27.riscv64 9/15 Running scriptlet: pcre-utf32-8.41-4.fc27.riscv64 9/15 Installing : pcre-utf16-8.41-4.fc27.r [ ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [=== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [==== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [===== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [====== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [======= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [======== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [========= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [========== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [=========== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [============ ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [============= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [============== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [=============== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [================ ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [================= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [=================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [==================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [===================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [====================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [======================= ] 10/15 Installing : pcre-utf16-8.41-4.fc27.r [======================== ] 10/15 Installing : pcre-utf16-8.41-4.fc27.riscv64 10/15 Running scriptlet: pcre-utf16-8.41-4.fc27.riscv64 10/15 Installing : pcre-cpp-8.41-4.fc27.ris [ ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [===== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [======= ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [========== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [============= ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [=============== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [================== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [==================== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [======================= ] 11/15 Installing : pcre-cpp-8.41-4.fc27.ris [======================== ] 11/15 Installing : pcre-cpp-8.41-4.fc27.riscv64 11/15 Running scriptlet: pcre-cpp-8.41-4.fc27.riscv64 11/15 Installing : pcre-devel-8.41-4.fc27.r [ ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [=== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [==== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [===== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [====== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [======= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [======== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [========= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [========== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [=========== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [============ ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [============= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [============== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [=============== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [================ ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [================= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [=================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [==================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [===================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [====================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [======================= ] 12/15 Installing : pcre-devel-8.41-4.fc27.r [======================== ] 12/15 Installing : pcre-devel-8.41-4.fc27.riscv64 12/15 Installing : libselinux-devel-2.7-11. [ ] 13/15 Installing : libselinux-devel-2.7-11. [=== ] 13/15 Installing : libselinux-devel-2.7-11. [======= ] 13/15 Installing : libselinux-devel-2.7-11. [========= ] 13/15 Installing : libselinux-devel-2.7-11. [========== ] 13/15 Installing : libselinux-devel-2.7-11. [=========== ] 13/15 Installing : libselinux-devel-2.7-11. [============== ] 13/15 Installing : libselinux-devel-2.7-11. [=============== ] 13/15 Installing : libselinux-devel-2.7-11. [================ ] 13/15 Installing : libselinux-devel-2.7-11. [================= ] 13/15 Installing : libselinux-devel-2.7-11. [================== ] 13/15 Installing : libselinux-devel-2.7-11. [=================== ] 13/15 Installing : libselinux-devel-2.7-11. [==================== ] 13/15 Installing : libselinux-devel-2.7-11. [===================== ] 13/15 Installing : libselinux-devel-2.7-11. [====================== ] 13/15 Installing : libselinux-devel-2.7-11. [======================= ] 13/15 Installing : libselinux-devel-2.7-11. [======================== ] 13/15 Installing : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 13/15 Installing : libsepol-static-2.7-3.fc [ ] 14/15 Installing : libsepol-static-2.7-3.fc [= ] 14/15 Installing : libsepol-static-2.7-3.fc [== ] 14/15 Installing : libsepol-static-2.7-3.fc [=== ] 14/15 Installing : libsepol-static-2.7-3.fc [==== ] 14/15 Installing : libsepol-static-2.7-3.fc [===== ] 14/15 Installing : libsepol-static-2.7-3.fc [====== ] 14/15 Installing : libsepol-static-2.7-3.fc [======= ] 14/15 Installing : libsepol-static-2.7-3.fc [======== ] 14/15 Installing : libsepol-static-2.7-3.fc [========= ] 14/15 Installing : libsepol-static-2.7-3.fc [========== ] 14/15 Installing : libsepol-static-2.7-3.fc [=========== ] 14/15 Installing : libsepol-static-2.7-3.fc [============ ] 14/15 Installing : libsepol-static-2.7-3.fc [============= ] 14/15 Installing : libsepol-static-2.7-3.fc [============== ] 14/15 Installing : libsepol-static-2.7-3.fc [=============== ] 14/15 Installing : libsepol-static-2.7-3.fc [================ ] 14/15 Installing : libsepol-static-2.7-3.fc [================= ] 14/15 Installing : libsepol-static-2.7-3.fc [================== ] 14/15 Installing : libsepol-static-2.7-3.fc [=================== ] 14/15 Installing : libsepol-static-2.7-3.fc [==================== ] 14/15 Installing : libsepol-static-2.7-3.fc [===================== ] 14/15 Installing : libsepol-static-2.7-3.fc [====================== ] 14/15 Installing : libsepol-static-2.7-3.fc [======================= ] 14/15 Installing : libsepol-static-2.7-3.fc [======================== ] 14/15 Installing : libsepol-static-2.7-3.fc28.riscv64 14/15 Installing : libcap-devel-2.25-7.fc28 [ ] 15/15 Installing : libcap-devel-2.25-7.fc28 [==== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [====== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [======= ] 15/15 Installing : libcap-devel-2.25-7.fc28 [========= ] 15/15 Installing : libcap-devel-2.25-7.fc28 [========== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [============= ] 15/15 Installing : libcap-devel-2.25-7.fc28 [============== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [================ ] 15/15 Installing : libcap-devel-2.25-7.fc28 [=================== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [===================== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [====================== ] 15/15 Installing : libcap-devel-2.25-7.fc28 [======================= ] 15/15 Installing : libcap-devel-2.25-7.fc28 [======================== ] 15/15 Installing : libcap-devel-2.25-7.fc28.riscv64 15/15 Running scriptlet: libcap-devel-2.25-7.fc28.riscv64 15/15 Verifying : libcap-devel-2.25-7.fc28.riscv64 1/15 Verifying : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 2/15 Verifying : libsepol-devel-2.7-3.fc28.riscv64 3/15 Verifying : libsepol-static-2.7-3.fc28.riscv64 4/15 Verifying : pcre-devel-8.41-4.fc27.riscv64 5/15 Verifying : pcre-cpp-8.41-4.fc27.riscv64 6/15 Verifying : pcre-utf16-8.41-4.fc27.riscv64 7/15 Verifying : pcre-utf32-8.41-4.fc27.riscv64 8/15 Verifying : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 9/15 Verifying : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 10/15 Verifying : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 11/15 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 12/15 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 13/15 Verifying : pkgconf-1.4.1-1.fc27.riscv64 14/15 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 15/15 Installed: libcap-devel.riscv64 2.25-7.fc28 libselinux-devel.riscv64 2.7-11.0.riscv64.fc28 libsepol-devel.riscv64 2.7-3.fc28 libsepol-static.riscv64 2.7-3.fc28 pcre-devel.riscv64 8.41-4.fc27 libpkgconf.riscv64 1.4.1-1.fc27 pcre-cpp.riscv64 8.41-4.fc27 pcre-utf16.riscv64 8.41-4.fc27 pcre-utf32.riscv64 8.41-4.fc27 pcre2-devel.riscv64 10.31-0.3.RC1.fc28.1 pcre2-utf16.riscv64 10.31-0.3.RC1.fc28.1 pcre2-utf32.riscv64 10.31-0.3.RC1.fc28.1 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:02:59 ago on Thu Feb 22 04:36:34 2018.random: crng init done Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:03:20 ago on Thu Feb 22 04:36:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group cpio util-linux gawk bash info redhat-rpm-config tar fedora-release make diffutils findutils xz bzip2 rpm-build shadow-utils sed coreutils which unzip grep gzip patch ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 27 Packages Total download size: 12 M Installed size: 50 M Downloading Packages: (1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/27): diffutils- 4% [- ] 2.1 MB/s | 637 kB 00:05 ETA (1/27): make-4.2.1-6.fc27.riscv64.rpm 801 kB/s | 486 kB 00:00 (2-3/27): diffutils- 11% [== ] 2.1 MB/s | 1.4 MB 00:05 ETA (2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 811 kB/s | 75 kB 00:00 (3-4/27): diffutils- 13% [==- ] 2.1 MB/s | 1.7 MB 00:05 ETA (3/27): diffutils-3.6-3.fc28.riscv64.rpm 647 kB/s | 577 kB 00:00 (4-5/27): nim-srpm-m 13% [==- ] 2.0 MB/s | 1.7 MB 00:05 ETA (4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 58 kB/s | 7.6 kB 00:00 (5/27): tar-1.29-7.f 13% [==- ] 2.0 MB/s | 1.7 MB 00:05 ETA (5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 100 kB/s | 7.8 kB 00:00 (6-7/27): openblas-s 13% [==- ] 2.0 MB/s | 1.7 MB 00:05 ETA (6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 112 kB/s | 6.6 kB 00:00 (7/27): tar-1.29-7.f 13% [==- ] 2.0 MB/s | 1.7 MB 00:05 ETA (7/27): rust-srpm-macros-5-1.fc28.noarch.rpm 226 kB/s | 8.0 kB 00:00 (8-9/27): tar-1.29-7 13% [==- ] 2.0 MB/s | 1.7 MB 00:05 ETA (8/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 78 kB/s | 9.0 kB 00:00 (9-10/27): tar-1.29- 14% [==- ] 1.9 MB/s | 1.8 MB 00:05 ETA (9/27): tar-1.29-7.fc27.riscv64.rpm 528 kB/s | 805 kB 00:01 (10-11/27): rpm-buil 18% [===- ] 1.9 MB/s | 2.3 MB 00:05 ETA (10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 558 kB/s | 235 kB 00:00 (11-12/27): zstd-1.3 19% [===- ] 1.9 MB/s | 2.4 MB 00:05 ETA (11/27): which-2.21-4.fc28.riscv64.rpm 417 kB/s | 65 kB 00:00 (12-13/27): zstd-1.3 20% [==== ] 1.9 MB/s | 2.5 MB 00:05 ETA (12/27): patch-2.7.5-6.fc27.riscv64.rpm 788 kB/s | 270 kB 00:00 (13-14/27): zstd-1.3 25% [===== ] 1.9 MB/s | 3.2 MB 00:04 ETA (13/27): unzip-6.0-36.fc28.riscv64.rpm 757 kB/s | 398 kB 00:00 (14-15/27): xz-5.2.3 29% [=====- ] 1.9 MB/s | 3.7 MB 00:04 ETA (14/27): xz-5.2.3-5.fc28.riscv64.rpm 578 kB/s | 212 kB 00:00 (15-16/27): bzip2-1. 30% [====== ] 1.9 MB/s | 3.8 MB 00:04 ETA (15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 404 kB/s | 81 kB 00:00 (16-17/27): elfutils 31% [====== ] 1.9 MB/s | 4.0 MB 00:04 ETA (16/27): file-5.32-3.fc28.riscv64.rpm 754 kB/s | 81 kB 00:00 (17-18/27): elfutils 33% [======- ] 1.9 MB/s | 4.2 MB 00:04 ETA (17-19/27): zstd-1.3 39% [=======- ] 1.9 MB/s | 5.0 MB 00:03 ETA (17/27): zstd-1.3.3-1.fc27.riscv64.rpm 617 kB/s | 1.1 MB 00:01 (18-19/27): binutils 40% [======== ] 1.9 MB/s | 5.1 MB 00:03 ETA (18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 242 kB/s | 7.5 kB 00:00 (19-20/27): elfutils 41% [======== ] 1.9 MB/s | 5.1 MB 00:03 ETA (19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 292 kB/s | 8.2 kB 00:00 (20-21/27): elfutils 41% [======== ] 1.9 MB/s | 5.2 MB 00:03 ETA (20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 272 kB/s | 8.8 kB 00:00 (21-22/27): elfutils 41% [======== ] 1.8 MB/s | 5.2 MB 00:03 ETA (21/27): go-srpm-macros-2-11.fc28.noarch.rpm 303 kB/s | 8.4 kB 00:00 (22-23/27): elfutils 42% [======== ] 1.8 MB/s | 5.3 MB 00:03 ETA (22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 238 kB/s | 9.7 kB 00:00 (23-24/27): elfutils 42% [========- ] 1.8 MB/s | 5.3 MB 00:03 ETA (23/27): python-srpm-macros-3-26.fc28.noarch.rp 387 kB/s | 10 kB 00:00 (24-25/27): elfutils 43% [========- ] 1.8 MB/s | 5.4 MB 00:03 ETA (24/27): dwz-0.12-5.fc28.riscv64.rpm 845 kB/s | 108 kB 00:00 (25-26/27): elfutils 45% [========= ] 1.8 MB/s | 5.7 MB 00:03 ETA (25/27): elfutils-0.170-4.fc28.riscv64.rpm 535 kB/s | 791 kB 00:01 (26-27/27): binutils 48% [=========- ] 1.8 MB/s | 6.1 MB 00:03 ETA (26/27): zip-3.0-20.fc28.riscv64.rpm 763 kB/s | 271 kB 00:00 (27/27): binutils-2. 50% [========== ] 1.8 MB/s | 6.3 MB 00:03 ETA (27/27): binutils-2. 58% [===========- ] 1.9 MB/s | 7.3 MB 00:02 ETA (27/27): binutils-2. 65% [============= ] 1.9 MB/s | 8.1 MB 00:02 ETA (27/27): binutils-2. 72% [============== ] 2.0 MB/s | 9.0 MB 00:01 ETA (27/27): binutils-2. 79% [===============- ] 2.1 MB/s | 9.9 MB 00:01 ETA (27/27): binutils-2. 86% [================= ] 2.1 MB/s | 11 MB 00:00 ETA (27/27): binutils-2. 94% [==================- ] 2.2 MB/s | 12 MB 00:00 ETA (27/27): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.7 MB/s | 12 MB 00:07 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 1/27 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv64 2/27 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 3/27 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 4/27 Installing : python-srpm-macros-3-26. [ ] 5/27 Installing : python-srpm-macros-3-26. [======================= ] 5/27 Installing : python-srpm-macros-3-26.fc28.noarch 5/27 Installing : perl-srpm-macros-1-26.fc [ ] 6/27 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27 Installing : perl-srpm-macros-1-26.fc28.noarch 6/27 Installing : go-srpm-macros-2-11.fc28 [ ] 7/27 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27 Installing : go-srpm-macros-2-11.fc28.noarch 7/27 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27 Installing : binutils-2.30-1.fc28.ris [ ] 11/27 Installing : binutils-2.30-1.fc28.ris [= ] 11/27 Installing : binutils-2.30-1.fc28.ris [== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======== ] 11/27 Installing : binutils-2.30-1.fc28.ris [========= ] 11/27 Installing : binutils-2.30-1.fc28.ris [========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [============ ] 11/27 Installing : binutils-2.30-1.fc28.ris [============= ] 11/27 Installing : binutils-2.30-1.fc28.ris [============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [================ ] 11/27 Installing : binutils-2.30-1.fc28.ris [================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27 Installing : binutils-2.30-1.fc28.riscv64 11/27 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27 Installing : elfutils-0.170-4.fc28.ri [ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27 Installing : elfutils-0.170-4.fc28.riscv64 12/27 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.riscv64 13/27 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 14/27 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv64 15/27 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv64 16/27 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27 Installing : rust-srpm-macros-5-1.fc28.noarch 17/27 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27 Installing : openblas-srpm-macros-2-2 [ ] 19/27 Installing : openblas-srpm-macros-2-2 [================ ] 19/27 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27 Installing : nim-srpm-macros-1-1.fc28.noarch 21/27 Installing : redhat-rpm-config-96-1.f [ ] 22/27 Installing : redhat-rpm-config-96-1.f [== ] 22/27 Installing : redhat-rpm-config-96-1.f [=== ] 22/27 Installing : redhat-rpm-config-96-1.f [========= ] 22/27 Installing : redhat-rpm-config-96-1.f [=========== ] 22/27 Installing : redhat-rpm-config-96-1.f [================= ] 22/27 Installing : redhat-rpm-config-96-1.f [================== ] 22/27 Installing : redhat-rpm-config-96-1.f [=================== ] 22/27 Installing : redhat-rpm-config-96-1.f [===================== ] 22/27 Installing : redhat-rpm-config-96-1.f [====================== ] 22/27 Installing : redhat-rpm-config-96-1.f [======================== ] 22/27 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27 Installing : diffutils-3.6-3.fc28.ris [ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27 Installing : diffutils-3.6-3.fc28.riscv64 23/27 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv64 24/27 Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27 Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27 Installing : which-2.21-4.fc28.riscv6 [ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27 Installing : which-2.21-4.fc28.riscv64 26/27 Running scriptlet: which-2.21-4.fc28.riscv64 26/27 Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27 Installing : make-1:4.2.1-6.fc27.riscv64 27/27 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27 Verifying : tar-2:1.29-7.fc27.riscv64 1/27 Verifying : diffutils-3.6-3.fc28.riscv64 2/27 Verifying : make-1:4.2.1-6.fc27.riscv64 3/27 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27 Verifying : zstd-1.3.3-1.fc27.riscv64 11/27 Verifying : which-2.21-4.fc28.riscv64 12/27 Verifying : patch-2.7.5-6.fc27.riscv64 13/27 Verifying : unzip-6.0-36.fc28.riscv64 14/27 Verifying : xz-5.2.3-5.fc28.riscv64 15/27 Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27 Verifying : elfutils-0.170-4.fc28.riscv64 17/27 Verifying : file-5.32-3.fc28.riscv64 18/27 Verifying : binutils-2.30-1.fc28.riscv64 19/27 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27 Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27 Verifying : go-srpm-macros-2-11.fc28.noarch 23/27 Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27 Verifying : python-srpm-macros-3-26.fc28.noarch 25/27 Verifying : dwz-0.12-5.fc28.riscv64 26/27 Verifying : zip-3.0-20.fc28.riscv64 27/27 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:05:20 ago on Thu Feb 22 04:36:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 542 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 640 kB/s | 46 kB 00:03 ETA (2-4/4): glibc-heade 36% [======= ] 780 kB/s | 942 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 835 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 831 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 90% [================== ] 979 kB/s | 2.3 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 988 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 972 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 1.0 MB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 2.0 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off