OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 01:49:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/lunatic-python-1.0.1-0.16.20090917bzr.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/lunatic-python.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 3.0 MB/s | 911 kB 00:03 ETA Local RPMS 13% [==- ] 2.9 MB/s | 1.6 MB 00:03 ETA Local RPMS 22% [==== ] 2.9 MB/s | 2.6 MB 00:03 ETA Local RPMS 31% [====== ] 3.0 MB/s | 3.6 MB 00:02 ETA Local RPMS 39% [=======- ] 3.0 MB/s | 4.6 MB 00:02 ETA Local RPMS 48% [=========- ] 3.0 MB/s | 5.7 MB 00:01 ETA Local RPMS 57% [===========- ] 3.0 MB/s | 6.7 MB 00:01 ETA Local RPMS 59% [===========- ] 2.8 MB/s | 6.9 MB 00:01 ETA Local RPMS 67% [=============- ] 2.8 MB/s | 7.9 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 8.9 MB 00:00 ETA Local RPMS 84% [================- ] 2.9 MB/s | 9.8 MB 00:00 ETA Local RPMS 92% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 98% [===================-] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 2.3 MB/s | 12 MB 00:05 Last metadata expiration check: 0:01:28 ago on Thu Feb 22 01:49:34 2018. sh: /usr/bin/python: No such file or directory sh: /usr/bin/python: No such file or directory Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: compat-lua-devel riscv64 5.1.5-5.fc28 local 20 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python2-devel riscv64 2.7.14-9.fc28 local 410 k Installing dependencies: compat-lua-libs riscv64 5.1.5-5.fc28 local 328 k dwz riscv64 0.12-5.fc28 local 108 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k unzip riscv64 6.0-36.fc28 local 398 k zip riscv64 3.0-20.fc28 local 271 k Transaction Summary ================================================================================ Install 29 Packages Total download size: 11 M Installed size: 42 M Downloading Packages: (1/29): compat-lua-d 0% [ ] --- B/s | 0 B --:-- ETA (1/29): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 504 kB/s | 14 kB 00:00 (2-3/29): compat-lua 0% [ ] 518 kB/s | 36 kB 00:21 ETA (2/29): compat-lua-devel-5.1.5-5.fc28.riscv64.r 164 kB/s | 20 kB 00:00 (3-4/29): pkgconf-m4 0% [ ] 522 kB/s | 81 kB 00:20 ETA (3/29): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 365 kB/s | 15 kB 00:00 (4/29): compat-lua-l 0% [ ] 522 kB/s | 81 kB 00:20 ETA (4/29): pkgconf-1.4.1-1.fc27.riscv64.rpm 467 kB/s | 35 kB 00:00 (5-6/29): libpkgconf 1% [ ] 538 kB/s | 212 kB 00:20 ETA (5/29): libpkgconf-1.4.1-1.fc27.riscv64.rpm 547 kB/s | 74 kB 00:00 (6-7/29): python2-de 2% [- ] 548 kB/s | 301 kB 00:19 ETA (6/29): python2-2.7.14-9.fc28.riscv64.rpm 722 kB/s | 107 kB 00:00 (7-8/29): compat-lua 6% [= ] 608 kB/s | 696 kB 00:16 ETA (7/29): compat-lua-libs-5.1.5-5.fc28.riscv64.rp 538 kB/s | 328 kB 00:00 (8-9/29): python2-de 8% [=- ] 630 kB/s | 896 kB 00:16 ETA (8/29): python-rpm-macros-3-26.fc28.noarch.rpm 416 kB/s | 11 kB 00:00 (9-10/29): python2-d 8% [=- ] 633 kB/s | 938 kB 00:15 ETA (9/29): python2-rpm-macros-3-26.fc28.noarch.rpm 392 kB/s | 10 kB 00:00 (10-11/29): python2- 8% [=- ] 635 kB/s | 980 kB 00:15 ETA (10/29): python3-rpm-generators-5-1.fc28.noarch 554 kB/s | 23 kB 00:00 (11-12/29): python2- 9% [=- ] 644 kB/s | 1.0 MB 00:15 ETA (11/29): python2-devel-2.7.14-9.fc28.riscv64.rp 585 kB/s | 410 kB 00:00 (12-13/29): python2- 12% [== ] 678 kB/s | 1.3 MB 00:14 ETA (12/29): redhat-rpm-config-96-1.fc28.0.riscv64. 813 kB/s | 75 kB 00:00 (13-14/29): python2- 14% [==- ] 710 kB/s | 1.5 MB 00:13 ETA (13/29): nim-srpm-macros-1-1.fc28.noarch.rpm 321 kB/s | 7.6 kB 00:00 (14-15/29): python2- 14% [==- ] 711 kB/s | 1.6 MB 00:13 ETA (14/29): ocaml-srpm-macros-5-2.fc27.noarch.rpm 328 kB/s | 7.8 kB 00:00 (15-16/29): python2- 15% [=== ] 712 kB/s | 1.6 MB 00:13 ETA (15/29): openblas-srpm-macros-2-2.fc27.noarch.r 283 kB/s | 6.6 kB 00:00 (16-17/29): python2- 15% [=== ] 713 kB/s | 1.7 MB 00:13 ETA (16/29): qt5-srpm-macros-5.10.0-1.fc28.noarch.r 365 kB/s | 9.0 kB 00:00 (17-18/29): python2- 15% [=== ] 714 kB/s | 1.7 MB 00:12 ETA (17/29): rust-srpm-macros-5-1.fc28.noarch.rpm 331 kB/s | 8.0 kB 00:00 (18-19/29): python2- 16% [=== ] 715 kB/s | 1.7 MB 00:12 ETA (18/29): file-5.32-3.fc28.riscv64.rpm 775 kB/s | 81 kB 00:00 (19-20/29): python3- 18% [===- ] 751 kB/s | 2.0 MB 00:11 ETA (19/29): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 307 kB/s | 7.5 kB 00:00 (20-21/29): python3- 19% [===- ] 751 kB/s | 2.0 MB 00:11 ETA (20/29): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 345 kB/s | 8.2 kB 00:00 (21-22/29): python3- 19% [===- ] 752 kB/s | 2.1 MB 00:11 ETA (21/29): gnat-srpm-macros-4-5.fc28.noarch.rpm 356 kB/s | 8.8 kB 00:00 (22-23/29): python3- 19% [===- ] 753 kB/s | 2.1 MB 00:11 ETA (22/29): go-srpm-macros-2-11.fc28.noarch.rpm 340 kB/s | 8.4 kB 00:00 (23-24/29): python3- 20% [==== ] 754 kB/s | 2.2 MB 00:11 ETA (23/29): perl-srpm-macros-1-26.fc28.noarch.rpm 395 kB/s | 9.7 kB 00:00 (24-25/29): python3- 20% [==== ] 754 kB/s | 2.2 MB 00:11 ETA (24/29): python-srpm-macros-3-26.fc28.noarch.rp 403 kB/s | 10 kB 00:00 (25-26/29): python3- 20% [==== ] 755 kB/s | 2.2 MB 00:11 ETA (25/29): dwz-0.12-5.fc28.riscv64.rpm 870 kB/s | 108 kB 00:00 (26-27/29): python3- 23% [====- ] 799 kB/s | 2.6 MB 00:10 ETA (26/29): python3-setuptools-38.4.0-3.fc28.noarc 498 kB/s | 620 kB 00:01 (27-28/29): zip-3.0- 25% [===== ] 810 kB/s | 2.8 MB 00:10 ETA (27/29): zip-3.0-20.fc28.riscv64.rpm 683 kB/s | 271 kB 00:00 (28-29/29): unzip-6. 31% [====== ] 894 kB/s | 3.4 MB 00:08 ETA (28/29): unzip-6.0-36.fc28.riscv64.rpm 974 kB/s | 398 kB 00:00 (29/29): python2-lib 34% [======- ] 938 kB/s | 3.7 MB 00:07 ETA (29/29): python2-lib 42% [========- ] 1.0 MB/s | 4.6 MB 00:05 ETA (29/29): python2-lib 50% [========== ] 1.1 MB/s | 5.5 MB 00:04 ETA (29/29): python2-lib 59% [===========- ] 1.3 MB/s | 6.3 MB 00:03 ETA (29/29): python2-lib 67% [============= ] 1.3 MB/s | 7.2 MB 00:02 ETA (29/29): python2-lib 75% [=============== ] 1.4 MB/s | 8.1 MB 00:01 ETA (29/29): python2-lib 83% [================- ] 1.5 MB/s | 8.9 MB 00:01 ETA (29/29): python2-lib 91% [================== ] 1.6 MB/s | 9.8 MB 00:00 ETA (29/29): python2-lib 99% [===================-] 1.7 MB/s | 11 MB 00:00 ETA (29/29): python2-libs-2.7.14-9.fc28.riscv64.rpm 1.5 MB/s | 8.1 MB 00:05 -------------------------------------------------------------------------------- Total 1.7 MB/s | 11 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : python2-libs-2.7.14-9.fc [ ] 1/29 Installing : python2-libs-2.7.14-9.fc [= ] 1/29 Installing : python2-libs-2.7.14-9.fc [== ] 1/29 Installing : python2-libs-2.7.14-9.fc [=== ] 1/29 Installing : python2-libs-2.7.14-9.fc [==== ] 1/29 Installing : python2-libs-2.7.14-9.fc [===== ] 1/29 Installing : python2-libs-2.7.14-9.fc [====== ] 1/29 Installing : python2-libs-2.7.14-9.fc [======= ] 1/29 Installing : python2-libs-2.7.14-9.fc [======== ] 1/29 Installing : python2-libs-2.7.14-9.fc [========= ] 1/29 Installing : python2-libs-2.7.14-9.fc [========== ] 1/29 Installing : python2-libs-2.7.14-9.fc [=========== ] 1/29 Installing : python2-libs-2.7.14-9.fc [============ ] 1/29 Installing : python2-libs-2.7.14-9.fc [============= ] 1/29 Installing : python2-libs-2.7.14-9.fc [============== ] 1/29 Installing : python2-libs-2.7.14-9.fc [=============== ] 1/29 Installing : python2-libs-2.7.14-9.fc [================ ] 1/29 Installing : python2-libs-2.7.14-9.fc [================= ] 1/29 Installing : python2-libs-2.7.14-9.fc [================== ] 1/29 Installing : python2-libs-2.7.14-9.fc [=================== ] 1/29 Installing : python2-libs-2.7.14-9.fc [==================== ] 1/29 Installing : python2-libs-2.7.14-9.fc [===================== ] 1/29 Installing : python2-libs-2.7.14-9.fc [====================== ] 1/29 Installing : python2-libs-2.7.14-9.fc [======================= ] 1/29 Installing : python2-libs-2.7.14-9.fc [======================== ] 1/29 Installing : python2-libs-2.7.14-9.fc28.riscv64 1/29 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 1/29 Installing : python2-2.7.14-9.fc28.ri [ ] 2/29 Installing : python2-2.7.14-9.fc28.ri [====== ] 2/29 Installing : python2-2.7.14-9.fc28.ri [============== ] 2/29 Installing : python2-2.7.14-9.fc28.ri [==================== ] 2/29 Installing : python2-2.7.14-9.fc28.ri [======================= ] 2/29 Installing : python2-2.7.14-9.fc28.ri [======================== ] 2/29random: crng init done Installing : python2-2.7.14-9.fc28.riscv64 2/29 Installing : python-srpm-macros-3-26. [ ] 3/29 Installing : python-srpm-macros-3-26. [======================= ] 3/29 Installing : python-srpm-macros-3-26.fc28.noarch 3/29 Installing : python-rpm-macros-3-26.f [ ] 4/29 Installing : python-rpm-macros-3-26.f [======================= ] 4/29 Installing : python-rpm-macros-3-26.fc28.noarch 4/29 Installing : unzip-6.0-36.fc28.riscv6 [ ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 5/29 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 5/29 Installing : unzip-6.0-36.fc28.riscv64 5/29 Installing : zip-3.0-20.fc28.riscv64 [ ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [=== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [==== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [===== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [====== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [======= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [======== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [========= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [========== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [============ ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [============= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [============== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [================ ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [================= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 6/29 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 6/29 Installing : zip-3.0-20.fc28.riscv64 6/29 Installing : dwz-0.12-5.fc28.riscv64 [ ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 7/29 Installing : dwz-0.12-5.fc28.riscv64 7/29 Installing : perl-srpm-macros-1-26.fc [ ] 8/29 Installing : perl-srpm-macros-1-26.fc [====================== ] 8/29 Installing : perl-srpm-macros-1-26.fc28.noarch 8/29 Installing : go-srpm-macros-2-11.fc28 [ ] 9/29 Installing : go-srpm-macros-2-11.fc28 [====================== ] 9/29 Installing : go-srpm-macros-2-11.fc28.noarch 9/29 Installing : gnat-srpm-macros-4-5.fc2 [ ] 10/29 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 10/29 Installing : gnat-srpm-macros-4-5.fc28.noarch 10/29 Installing : ghc-srpm-macros-1.4.2-7. [ ] 11/29 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 11/29 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 11/29 Installing : fpc-srpm-macros-1.1-4.fc [ ] 12/29 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 12/29 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 12/29 Installing : file-5.32-3.fc28.riscv64 [ ] 13/29 Installing : file-5.32-3.fc28.riscv64 [====== ] 13/29 Installing : file-5.32-3.fc28.riscv64 [=========== ] 13/29 Installing : file-5.32-3.fc28.riscv64 [================== ] 13/29 Installing : file-5.32-3.fc28.riscv64 [===================== ] 13/29 Installing : file-5.32-3.fc28.riscv64 [====================== ] 13/29 Installing : file-5.32-3.fc28.riscv64 [======================= ] 13/29 Installing : file-5.32-3.fc28.riscv64 [======================== ] 13/29 Installing : file-5.32-3.fc28.riscv64 13/29 Installing : rust-srpm-macros-5-1.fc2 [ ] 14/29 Installing : rust-srpm-macros-5-1.fc2 [=== ] 14/29 Installing : rust-srpm-macros-5-1.fc2 [===== ] 14/29 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 14/29 Installing : rust-srpm-macros-5-1.fc28.noarch 14/29 Installing : qt5-srpm-macros-5.10.0-1 [ ] 15/29 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 15/29 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 15/29 Installing : openblas-srpm-macros-2-2 [ ] 16/29 Installing : openblas-srpm-macros-2-2 [================ ] 16/29 Installing : openblas-srpm-macros-2-2.fc27.noarch 16/29 Installing : ocaml-srpm-macros-5-2.fc [ ] 17/29 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 17/29 Installing : ocaml-srpm-macros-5-2.fc27.noarch 17/29 Installing : nim-srpm-macros-1-1.fc28 [ ] 18/29 Installing : nim-srpm-macros-1-1.fc28 [=== ] 18/29 Installing : nim-srpm-macros-1-1.fc28 [===== ] 18/29 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 18/29 Installing : nim-srpm-macros-1-1.fc28.noarch 18/29 Installing : redhat-rpm-config-96-1.f [ ] 19/29 Installing : redhat-rpm-config-96-1.f [== ] 19/29 Installing : redhat-rpm-config-96-1.f [=== ] 19/29 Installing : redhat-rpm-config-96-1.f [========= ] 19/29 Installing : redhat-rpm-config-96-1.f [=========== ] 19/29 Installing : redhat-rpm-config-96-1.f [================= ] 19/29 Installing : redhat-rpm-config-96-1.f [================== ] 19/29 Installing : redhat-rpm-config-96-1.f [=================== ] 19/29 Installing : redhat-rpm-config-96-1.f [===================== ] 19/29 Installing : redhat-rpm-config-96-1.f [====================== ] 19/29 Installing : redhat-rpm-config-96-1.f [======================== ] 19/29 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 19/29 Installing : python3-setuptools-38.4. [ ] 20/29 Installing : python3-setuptools-38.4. [= ] 20/29 Installing : python3-setuptools-38.4. [== ] 20/29 Installing : python3-setuptools-38.4. [=== ] 20/29 Installing : python3-setuptools-38.4. [==== ] 20/29 Installing : python3-setuptools-38.4. [===== ] 20/29 Installing : python3-setuptools-38.4. [====== ] 20/29 Installing : python3-setuptools-38.4. [======= ] 20/29 Installing : python3-setuptools-38.4. [======== ] 20/29 Installing : python3-setuptools-38.4. [========= ] 20/29 Installing : python3-setuptools-38.4. [========== ] 20/29 Installing : python3-setuptools-38.4. [=========== ] 20/29 Installing : python3-setuptools-38.4. [============ ] 20/29 Installing : python3-setuptools-38.4. [============= ] 20/29 Installing : python3-setuptools-38.4. [============== ] 20/29 Installing : python3-setuptools-38.4. [=============== ] 20/29 Installing : python3-setuptools-38.4. [================ ] 20/29 Installing : python3-setuptools-38.4. [================= ] 20/29 Installing : python3-setuptools-38.4. [================== ] 20/29 Installing : python3-setuptools-38.4. [=================== ] 20/29 Installing : python3-setuptools-38.4. [==================== ] 20/29 Installing : python3-setuptools-38.4. [===================== ] 20/29 Installing : python3-setuptools-38.4. [====================== ] 20/29 Installing : python3-setuptools-38.4. [======================= ] 20/29 Installing : python3-setuptools-38.4. [======================== ] 20/29 Installing : python3-setuptools-38.4.0-3.fc28.noarch 20/29 Installing : python3-rpm-generators-5 [ ] 21/29 Installing : python3-rpm-generators-5 [===== ] 21/29 Installing : python3-rpm-generators-5 [=================== ] 21/29 Installing : python3-rpm-generators-5 [======================== ] 21/29 Installing : python3-rpm-generators-5-1.fc28.noarch 21/29 Installing : python2-rpm-macros-3-26. [ ] 22/29 Installing : python2-rpm-macros-3-26. [======================= ] 22/29 Installing : python2-rpm-macros-3-26.fc28.noarch 22/29 Installing : libpkgconf-1.4.1-1.fc27. [ ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 23/29 Installing : libpkgconf-1.4.1-1.fc27.riscv64 23/29 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 23/29 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 24/29 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 24/29 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 24/29 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 24/29 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 24/29 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 24/29 Installing : pkgconf-1.4.1-1.fc27.riscv64 24/29 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 25/29 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 25/29 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 25/29 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 25/29 Installing : pkgconf-pkg-config-1.4.1 [ ] 26/29 Installing : pkgconf-pkg-config-1.4.1 [==== ] 26/29 Installing : pkgconf-pkg-config-1.4.1 [===== ] 26/29 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 26/29 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 26/29 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 26/29 Installing : compat-lua-libs-5.1.5-5. [ ] 27/29 Installing : compat-lua-libs-5.1.5-5. [= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [=== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [==== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [===== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [====== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [======= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [======== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [========= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [========== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [=========== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [============ ] 27/29 Installing : compat-lua-libs-5.1.5-5. [============= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [============== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [=============== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [================ ] 27/29 Installing : compat-lua-libs-5.1.5-5. [================= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [================== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [=================== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [==================== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [===================== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [====================== ] 27/29 Installing : compat-lua-libs-5.1.5-5. [======================= ] 27/29 Installing : compat-lua-libs-5.1.5-5. [======================== ] 27/29 Installing : compat-lua-libs-5.1.5-5.fc28.riscv64 27/29 Running scriptlet: compat-lua-libs-5.1.5-5.fc28.riscv64 27/29 Installing : compat-lua-devel-5.1.5-5 [ ] 28/29 Installing : compat-lua-devel-5.1.5-5 [=== ] 28/29 Installing : compat-lua-devel-5.1.5-5 [========== ] 28/29 Installing : compat-lua-devel-5.1.5-5 [======================== ] 28/29 Installing : compat-lua-devel-5.1.5-5.fc28.riscv64 28/29 Installing : python2-devel-2.7.14-9.f [ ] 29/29 Installing : python2-devel-2.7.14-9.f [= ] 29/29 Installing : python2-devel-2.7.14-9.f [== ] 29/29 Installing : python2-devel-2.7.14-9.f [=== ] 29/29 Installing : python2-devel-2.7.14-9.f [==== ] 29/29 Installing : python2-devel-2.7.14-9.f [===== ] 29/29 Installing : python2-devel-2.7.14-9.f [====== ] 29/29 Installing : python2-devel-2.7.14-9.f [======= ] 29/29 Installing : python2-devel-2.7.14-9.f [======== ] 29/29 Installing : python2-devel-2.7.14-9.f [========= ] 29/29 Installing : python2-devel-2.7.14-9.f [========== ] 29/29 Installing : python2-devel-2.7.14-9.f [=========== ] 29/29 Installing : python2-devel-2.7.14-9.f [============ ] 29/29 Installing : python2-devel-2.7.14-9.f [============= ] 29/29 Installing : python2-devel-2.7.14-9.f [============== ] 29/29 Installing : python2-devel-2.7.14-9.f [=============== ] 29/29 Installing : python2-devel-2.7.14-9.f [================ ] 29/29 Installing : python2-devel-2.7.14-9.f [================= ] 29/29 Installing : python2-devel-2.7.14-9.f [================== ] 29/29 Installing : python2-devel-2.7.14-9.f [=================== ] 29/29 Installing : python2-devel-2.7.14-9.f [==================== ] 29/29 Installing : python2-devel-2.7.14-9.f [===================== ] 29/29 Installing : python2-devel-2.7.14-9.f [====================== ] 29/29 Installing : python2-devel-2.7.14-9.f [======================= ] 29/29 Installing : python2-devel-2.7.14-9.f [======================== ] 29/29 Installing : python2-devel-2.7.14-9.fc28.riscv64 29/29 Running scriptlet: python2-devel-2.7.14-9.fc28.riscv64 29/29 Verifying : compat-lua-devel-5.1.5-5.fc28.riscv64 1/29 Verifying : compat-lua-libs-5.1.5-5.fc28.riscv64 2/29 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 3/29 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 4/29 Verifying : pkgconf-1.4.1-1.fc27.riscv64 5/29 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 6/29 Verifying : python2-devel-2.7.14-9.fc28.riscv64 7/29 Verifying : python2-2.7.14-9.fc28.riscv64 8/29 Verifying : python2-libs-2.7.14-9.fc28.riscv64 9/29 Verifying : python-rpm-macros-3-26.fc28.noarch 10/29 Verifying : python2-rpm-macros-3-26.fc28.noarch 11/29 Verifying : python3-rpm-generators-5-1.fc28.noarch 12/29 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 13/29 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 14/29 Verifying : nim-srpm-macros-1-1.fc28.noarch 15/29 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 16/29 Verifying : openblas-srpm-macros-2-2.fc27.noarch 17/29 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/29 Verifying : rust-srpm-macros-5-1.fc28.noarch 19/29 Verifying : file-5.32-3.fc28.riscv64 20/29 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 21/29 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 22/29 Verifying : gnat-srpm-macros-4-5.fc28.noarch 23/29 Verifying : go-srpm-macros-2-11.fc28.noarch 24/29 Verifying : perl-srpm-macros-1-26.fc28.noarch 25/29 Verifying : python-srpm-macros-3-26.fc28.noarch 26/29 Verifying : dwz-0.12-5.fc28.riscv64 27/29 Verifying : zip-3.0-20.fc28.riscv64 28/29 Verifying : unzip-6.0-36.fc28.riscv64 29/29 Installed: compat-lua-devel.riscv64 5.1.5-5.fc28 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python2-devel.riscv64 2.7.14-9.fc28 compat-lua-libs.riscv64 5.1.5-5.fc28 dwz.riscv64 0.12-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-setuptools.noarch 38.4.0-3.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 unzip.riscv64 6.0-36.fc28 zip.riscv64 3.0-20.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:04:08 ago on Thu Feb 22 01:49:34 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:04:27 ago on Thu Feb 22 01:49:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group which bash coreutils grep patch unzip cpio tar util-linux fedora-release findutils gawk info diffutils shadow-utils bzip2 gzip rpm-build make redhat-rpm-config xz sed ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): diffutils- 6% [= ] 2.5 MB/s | 783 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 906 kB/s | 486 kB 00:00 (2-3/11): diffutils- 12% [==- ] 2.5 MB/s | 1.4 MB 00:03 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 771 kB/s | 577 kB 00:00 (3-4/11): rpm-build- 14% [==- ] 2.5 MB/s | 1.7 MB 00:03 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 662 kB/s | 235 kB 00:00 (4-5/11): zstd-1.3.3 18% [===- ] 2.5 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 691 kB/s | 805 kB 00:01 (5-6/11): which-2.21 20% [==== ] 2.4 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 329 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.4 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 908 kB/s | 212 kB 00:00 (7-8/11): zstd-1.3.3 25% [===== ] 2.4 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 742 kB/s | 270 kB 00:00 (8-9/11): zstd-1.3.3 27% [===== ] 2.4 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 467 kB/s | 81 kB 00:00 (9-10/11): zstd-1.3. 28% [=====- ] 2.4 MB/s | 3.2 MB 00:03 ETA (9-11/11): binutils- 35% [======= ] 2.4 MB/s | 4.1 MB 00:03 ETA (9-11/11): binutils- 44% [========- ] 2.4 MB/s | 5.1 MB 00:02 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 717 kB/s | 1.1 MB 00:01 (10-11/11): binutils 44% [========- ] 2.4 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 801 kB/s | 791 kB 00:00 (11/11): binutils-2. 46% [========= ] 2.4 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 53% [==========- ] 2.4 MB/s | 6.1 MB 00:02 ETA (11/11): binutils-2. 61% [============ ] 2.5 MB/s | 7.0 MB 00:01 ETA (11/11): binutils-2. 68% [=============- ] 2.5 MB/s | 7.9 MB 00:01 ETA (11/11): binutils-2. 76% [=============== ] 2.5 MB/s | 8.7 MB 00:01 ETA (11/11): binutils-2. 83% [================- ] 2.5 MB/s | 9.6 MB 00:00 ETA (11/11): binutils-2. 91% [================== ] 2.6 MB/s | 10 MB 00:00 ETA (11/11): binutils-2. 98% [===================-] 2.6 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.8 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 2.0 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:06:02 ago on Thu Feb 22 01:49:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 542 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 646 kB/s | 46 kB 00:03 ETA (2-4/4): glibc-heade 36% [======= ] 786 kB/s | 942 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 818 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 836 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 89% [=================- ] 973 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 961 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 973 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 985 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off