OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 22:54:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/llvm35-3.5.2-3.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/llvm35.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.1 MB/s | 959 kB 00:03 ETA Local RPMS 15% [=== ] 3.1 MB/s | 1.8 MB 00:03 ETA Local RPMS 25% [===== ] 3.1 MB/s | 2.9 MB 00:02 ETA Local RPMS 34% [======- ] 3.2 MB/s | 4.0 MB 00:02 ETA Local RPMS 44% [========- ] 3.2 MB/s | 5.1 MB 00:02 ETA Local RPMS 53% [==========- ] 3.2 MB/s | 6.2 MB 00:01 ETA Local RPMS 59% [===========- ] 3.0 MB/s | 6.8 MB 00:01 ETA Local RPMS 67% [=============- ] 3.0 MB/s | 7.8 MB 00:01 ETA Local RPMS 76% [=============== ] 3.1 MB/s | 8.9 MB 00:00 ETA Local RPMS 85% [================= ] 3.1 MB/s | 9.9 MB 00:00 ETA Local RPMS 94% [==================- ] 3.1 MB/s | 11 MB 00:00 ETA Local RPMS 2.5 MB/s | 12 MB 00:04 Last metadata expiration check: 0:01:29 ago on Wed Feb 21 22:54:35 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: bison riscv64 3.0.4-8.fc28 local 1.0 M chrpath riscv64 0.16-6.fc28 local 44 k dejagnu noarch 1:1.6-3.fc27 local 234 k flex riscv64 2.6.1-5.fc27 local 301 k groff riscv64 1.22.3-8.fc27 local 1.1 M libffi-devel riscv64 3.1-9.fc27.0.riscv64 local 26 k libtool-ltdl-devel riscv64 2.4.6-21.fc27 local 182 k ncurses-devel riscv64 6.1-2.20180129.fc27 local 527 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k python2-devel riscv64 2.7.14-9.fc28 local 410 k tcl-devel riscv64 1:8.6.7-2.fc28 local 187 k zip riscv64 3.0-20.fc28 local 271 k Installing dependencies: dwz riscv64 0.12-5.fc28 local 108 k expect riscv64 5.45.3-1.fc28 local 564 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libtool-ltdl riscv64 2.4.6-21.fc27 local 85 k m4 riscv64 1.4.18-5.fc28 local 369 k ncurses-c++-libs riscv64 6.1-2.20180129.fc27 local 185 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k tcl riscv64 1:8.6.7-2.fc28 local 2.8 M unzip riscv64 6.0-36.fc28 local 398 k Transaction Summary ================================================================================ Install 74 Packages Total download size: 33 M Installed size: 115 M Downloading Packages: (1/74): groff-1.22.3 0% [ ] --- B/s | 0 B --:-- ETA (1/74): perl-podlators-4.09-408.fc27.0.riscv64. 735 kB/s | 157 kB 00:00 (2-3/74): bison-3.0. 1% [ ] 1.9 MB/s | 477 kB 00:16 ETA (2/74): chrpath-0.16-6.fc28.riscv64.rpm 754 kB/s | 44 kB 00:00 (3-4/74): bison-3.0. 1% [ ] 1.9 MB/s | 616 kB 00:16 ETA (3/74): dejagnu-1.6-3.fc27.noarch.rpm 871 kB/s | 234 kB 00:00 (4-5/74): bison-3.0. 3% [- ] 2.0 MB/s | 1.3 MB 00:15 ETA (4-6/74): bison-3.0. 6% [= ] 2.0 MB/s | 2.1 MB 00:15 ETA (4/74): flex-2.6.1-5.fc27.riscv64.rpm 809 kB/s | 301 kB 00:00 (5-6/74): bison-3.0. 6% [= ] 2.0 MB/s | 2.2 MB 00:15 ETA (5/74): libffi-devel-3.1-9.fc27.0.riscv64.riscv 552 kB/s | 26 kB 00:00 (6-7/74): bison-3.0. 7% [= ] 2.0 MB/s | 2.3 MB 00:15 ETA (6/74): libtool-ltdl-devel-2.4.6-21.fc27.riscv6 801 kB/s | 182 kB 00:00 (7-8/74): groff-1.22 8% [=- ] 2.0 MB/s | 2.9 MB 00:14 ETA (7/74): bison-3.0.4-8.fc28.riscv64.rpm 698 kB/s | 1.0 MB 00:01 (8-9/74): groff-1.22 9% [=- ] 1.9 MB/s | 3.0 MB 00:15 ETA (8/74): libtool-ltdl-2.4.6-21.fc27.riscv64.rpm 316 kB/s | 85 kB 00:00 (9-10/74): groff-1.2 9% [=- ] 1.9 MB/s | 3.1 MB 00:15 ETA (9/74): groff-1.22.3-8.fc27.riscv64.rpm 608 kB/s | 1.1 MB 00:01 (10-11/74): ncurses- 9% [=- ] 1.9 MB/s | 3.3 MB 00:15 ETA (10/74): ncurses-c++-libs-6.1-2.20180129.fc27.r 461 kB/s | 185 kB 00:00 (11-12/74): ncurses- 11% [== ] 1.9 MB/s | 3.7 MB 00:15 ETA (11/74): python2-2.7.14-9.fc28.riscv64.rpm 863 kB/s | 107 kB 00:00 (12-13/74): python2- 12% [== ] 1.9 MB/s | 4.0 MB 00:15 ETA (12/74): python2-devel-2.7.14-9.fc28.riscv64.rp 718 kB/s | 410 kB 00:00 (13-14/74): python2- 13% [==- ] 1.9 MB/s | 4.5 MB 00:14 ETA (13/74): ncurses-devel-6.1-2.20180129.fc27.risc 526 kB/s | 527 kB 00:01 (14-15/74): tcl-deve 13% [==- ] 1.8 MB/s | 4.5 MB 00:15 ETA (14/74): tcl-devel-8.6.7-2.fc28.riscv64.rpm 613 kB/s | 187 kB 00:00 (15-16/74): tcl-8.6. 15% [=== ] 1.9 MB/s | 5.0 MB 00:14 ETA (15-17/74): python2- 17% [===- ] 1.9 MB/s | 5.8 MB 00:13 ETA (15/74): zip-3.0-20.fc28.riscv64.rpm 850 kB/s | 271 kB 00:00 (16-17/74): tcl-8.6. 17% [===- ] 1.9 MB/s | 5.8 MB 00:13 ETA (16-18/74): tcl-8.6. 20% [==== ] 2.0 MB/s | 6.6 MB 00:13 ETA (16/74): unzip-6.0-36.fc28.riscv64.rpm 878 kB/s | 398 kB 00:00 (17-18/74): python2- 21% [==== ] 2.0 MB/s | 7.0 MB 00:13 ETA (17/74): python-rpm-macros-3-26.fc28.noarch.rpm 433 kB/s | 11 kB 00:00 (18-19/74): python2- 21% [==== ] 2.0 MB/s | 7.0 MB 00:13 ETA (18/74): python2-rpm-macros-3-26.fc28.noarch.rp 399 kB/s | 10 kB 00:00 (19-20/74): python2- 21% [==== ] 1.9 MB/s | 7.1 MB 00:13 ETA (19/74): python3-rpm-generators-5-1.fc28.noarch 486 kB/s | 23 kB 00:00 (20-21/74): python2- 21% [==== ] 1.9 MB/s | 7.1 MB 00:13 ETA (20-22/74): tcl-8.6. 24% [====- ] 2.0 MB/s | 8.0 MB 00:12 ETA (20-22/74): python3- 27% [===== ] 2.0 MB/s | 8.9 MB 00:11 ETA (20/74): python3-setuptools-38.4.0-3.fc28.noarc 901 kB/s | 620 kB 00:00 (21-22/74): tcl-8.6. 27% [=====- ] 2.0 MB/s | 9.0 MB 00:11 ETA (21/74): redhat-rpm-config-96-1.fc28.0.riscv64. 820 kB/s | 75 kB 00:00 (22-23/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.2 MB 00:11 ETA (22/74): nim-srpm-macros-1-1.fc28.noarch.rpm 305 kB/s | 7.6 kB 00:00 (23-24/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.2 MB 00:11 ETA (23/74): ocaml-srpm-macros-5-2.fc27.noarch.rpm 326 kB/s | 7.8 kB 00:00 (24-25/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.3 MB 00:11 ETA (24/74): openblas-srpm-macros-2-2.fc27.noarch.r 225 kB/s | 6.6 kB 00:00 (25-26/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.3 MB 00:11 ETA (25/74): qt5-srpm-macros-5.10.0-1.fc28.noarch.r 376 kB/s | 9.0 kB 00:00 (26-27/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.4 MB 00:11 ETA (26/74): rust-srpm-macros-5-1.fc28.noarch.rpm 262 kB/s | 8.0 kB 00:00 (27-28/74): tcl-8.6. 28% [=====- ] 2.0 MB/s | 9.4 MB 00:11 ETA (27/74): file-5.32-3.fc28.riscv64.rpm 713 kB/s | 81 kB 00:00 (28-29/74): tcl-8.6. 29% [=====- ] 1.9 MB/s | 9.7 MB 00:11 ETA (28/74): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 482 kB/s | 14 kB 00:00 (29-30/74): tcl-8.6. 29% [=====- ] 1.9 MB/s | 9.7 MB 00:11 ETA (29/74): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 467 kB/s | 15 kB 00:00 (30-31/74): tcl-8.6. 29% [=====- ] 1.9 MB/s | 9.7 MB 00:11 ETA (30/74): pkgconf-1.4.1-1.fc27.riscv64.rpm 529 kB/s | 35 kB 00:00 (31-32/74): python2- 30% [====== ] 1.9 MB/s | 9.9 MB 00:11 ETA (31/74): libpkgconf-1.4.1-1.fc27.riscv64.rpm 757 kB/s | 74 kB 00:00 (32-33/74): python2- 31% [====== ] 1.9 MB/s | 10 MB 00:11 ETA (32/74): perl-Data-Dumper-2.167-408.fc27.0.risc 860 kB/s | 149 kB 00:00 (33-34/74): python2- 32% [====== ] 1.9 MB/s | 11 MB 00:11 ETA (33/74): perl-PathTools-3.67-408.fc27.0.riscv64 876 kB/s | 166 kB 00:00 (34-35/74): python2- 33% [======- ] 1.9 MB/s | 11 MB 00:11 ETA (34-36/74): python2- 36% [======= ] 2.0 MB/s | 12 MB 00:10 ETA (34-36/74): tcl-8.6. 39% [=======- ] 2.0 MB/s | 13 MB 00:09 ETA (34/74): tcl-8.6.7-2.fc28.riscv64.rpm 700 kB/s | 2.8 MB 00:04 (35-36/74): perl-lib 39% [=======- ] 1.9 MB/s | 13 MB 00:10 ETA (35-37/74): perl-lib 41% [======== ] 2.0 MB/s | 14 MB 00:09 ETA (35-37/74): perl-int 44% [========- ] 2.0 MB/s | 14 MB 00:08 ETA (35-37/74): perl-int 47% [========= ] 2.1 MB/s | 15 MB 00:08 ETA (35-37/74): perl-int 49% [=========- ] 2.1 MB/s | 16 MB 00:07 ETA (35-37/74): python2- 52% [========== ] 2.1 MB/s | 17 MB 00:07 ETA (35-37/74): python2- 54% [==========- ] 2.2 MB/s | 18 MB 00:06 ETA (35-37/74): python2- 57% [===========- ] 2.2 MB/s | 19 MB 00:06 ETA (35-37/74): python2- 60% [============ ] 2.3 MB/s | 20 MB 00:05 ETA (35-37/74): perl-lib 63% [============- ] 2.3 MB/s | 21 MB 00:05 ETA (35/74): perl-libs-5.26.1-408.fc28.1.riscv64.ri 805 kB/s | 3.3 MB 00:04 (36-37/74): python2- 64% [============- ] 2.2 MB/s | 21 MB 00:05 ETA (36-38/74): m4-1.4.1 66% [============= ] 2.2 MB/s | 22 MB 00:04 ETA (36/74): m4-1.4.18-5.fc28.riscv64.rpm 852 kB/s | 369 kB 00:00 (37-38/74): perl-int 67% [=============- ] 2.2 MB/s | 22 MB 00:04 ETA (37/74): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 308 kB/s | 7.5 kB 00:00 (38-39/74): perl-int 67% [=============- ] 2.2 MB/s | 22 MB 00:04 ETA (38/74): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 342 kB/s | 8.2 kB 00:00 (39-40/74): perl-int 68% [=============- ] 2.1 MB/s | 22 MB 00:04 ETA (39/74): gnat-srpm-macros-4-5.fc28.noarch.rpm 355 kB/s | 8.8 kB 00:00 (40-41/74): perl-int 68% [=============- ] 2.1 MB/s | 22 MB 00:04 ETA (40/74): go-srpm-macros-2-11.fc28.noarch.rpm 350 kB/s | 8.4 kB 00:00 (41-42/74): perl-int 68% [=============- ] 2.1 MB/s | 22 MB 00:04 ETA (41/74): perl-srpm-macros-1-26.fc28.noarch.rpm 388 kB/s | 9.7 kB 00:00 (42-43/74): perl-int 68% [=============- ] 2.1 MB/s | 22 MB 00:04 ETA (42/74): python-srpm-macros-3-26.fc28.noarch.rp 413 kB/s | 10 kB 00:00 (43-44/74): perl-int 68% [=============- ] 2.1 MB/s | 22 MB 00:04 ETA (43/74): dwz-0.12-5.fc28.riscv64.rpm 818 kB/s | 108 kB 00:00 (44-45/74): perl-int 69% [=============- ] 2.1 MB/s | 23 MB 00:04 ETA (44/74): perl-Carp-1.42-408.fc27.0.riscv64.noar 747 kB/s | 84 kB 00:00 (45-46/74): perl-int 70% [============== ] 2.1 MB/s | 23 MB 00:04 ETA (45/74): perl-Exporter-5.72-408.fc27.0.riscv64. 794 kB/s | 87 kB 00:00 (46-47/74): python2- 71% [============== ] 2.1 MB/s | 23 MB 00:04 ETA (46/74): perl-Getopt-Long-2.50-3.fc27.noarch.rp 740 kB/s | 61 kB 00:00 (47-48/74): python2- 71% [============== ] 2.1 MB/s | 23 MB 00:04 ETA (47/74): perl-Pod-Simple-3.35-408.fc27.0.riscv6 904 kB/s | 271 kB 00:00 (48-49/74): python2- 74% [==============- ] 2.1 MB/s | 24 MB 00:03 ETA (48/74): perl-Pod-Usage-1.69-408.fc27.0.riscv64 764 kB/s | 89 kB 00:00 (49-50/74): python2- 75% [=============== ] 2.1 MB/s | 24 MB 00:03 ETA (49/74): perl-Term-ANSIColor-4.06-408.fc27.0.ri 835 kB/s | 94 kB 00:00 (50-51/74): python2- 75% [=============== ] 2.1 MB/s | 25 MB 00:03 ETA (50/74): perl-Term-Cap-1.17-408.fc27.0.riscv64. 829 kB/s | 78 kB 00:00 (51-52/74): python2- 76% [=============== ] 2.1 MB/s | 25 MB 00:03 ETA (51-53/74): perl-int 79% [===============- ] 2.1 MB/s | 26 MB 00:03 ETA (51-53/74): perl-int 81% [================ ] 2.2 MB/s | 27 MB 00:02 ETA (51-53/74): perl-int 84% [================- ] 2.2 MB/s | 28 MB 00:02 ETA (51/74): python2-libs-2.7.14-9.fc28.riscv64.rpm 705 kB/s | 8.1 MB 00:11 (52-53/74): perl-int 86% [================= ] 1.8 MB/s | 28 MB 00:02 ETA (52/74): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 819 kB/s | 139 kB 00:00 (53-54/74): perl-Enc 87% [=================- ] 1.8 MB/s | 29 MB 00:02 ETA (53/74): perl-Pod-Escapes-1.07-408.fc27.0.riscv 808 kB/s | 77 kB 00:00 (54-55/74): perl-Enc 88% [=================- ] 1.8 MB/s | 29 MB 00:02 ETA (54/74): perl-Text-Tabs+Wrap-2013.0523-408.fc27 727 kB/s | 80 kB 00:00 (55-56/74): perl-Enc 89% [=================- ] 1.8 MB/s | 29 MB 00:01 ETA (55/74): perl-Encode-2.94-16.fc27.riscv64.rpm 533 kB/s | 1.4 MB 00:02 (56-57/74): perl-Fil 89% [=================- ] 1.8 MB/s | 29 MB 00:01 ETA (56/74): perl-File-Temp-0.230.400-408.fc27.0.ri 319 kB/s | 103 kB 00:00 (57-58/74): perl-Err 90% [================== ] 1.8 MB/s | 29 MB 00:01 ETA (57/74): perl-Errno-1.28-408.fc28.1.riscv64.ris 523 kB/s | 73 kB 00:00 (58-59/74): perl-HTT 90% [================== ] 1.8 MB/s | 30 MB 00:01 ETA (58/74): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 567 kB/s | 97 kB 00:00 (59-60/74): perl-Tex 91% [================== ] 1.8 MB/s | 30 MB 00:01 ETA (59/74): perl-Text-ParseWords-3.30-408.fc27.0.r 505 kB/s | 73 kB 00:00 (60-61/74): perl-par 91% [================== ] 1.8 MB/s | 30 MB 00:01 ETA (60/74): perl-parent-0.236-408.fc27.0.riscv64.n 472 kB/s | 71 kB 00:00 (61-62/74): perl-int 91% [================== ] 1.8 MB/s | 30 MB 00:01 ETA (61/74): perl-Time-Local-1.250-394.fc27.noarch. 653 kB/s | 30 kB 00:00 (62-63/74): perl-int 91% [================== ] 1.7 MB/s | 30 MB 00:01 ETA (62/74): perl-Socket-2.027-1.fc27.riscv64.rpm 887 kB/s | 95 kB 00:00 (63-64/74): perl-int 92% [==================- ] 1.8 MB/s | 30 MB 00:01 ETA (63/74): perl-IO-1.38-408.fc28.1.riscv64.riscv6 498 kB/s | 176 kB 00:00 (64-65/74): perl-int 92% [==================- ] 1.7 MB/s | 30 MB 00:01 ETA (64/74): perl-File-Path-2.15-1.fc27.noarch.rpm 567 kB/s | 37 kB 00:00 (65-66/74): perl-int 93% [==================- ] 1.7 MB/s | 30 MB 00:01 ETA (65/74): perl-constant-1.33-408.fc27.0.riscv64. 373 kB/s | 79 kB 00:00 (66-67/74): perl-int 93% [==================- ] 1.7 MB/s | 30 MB 00:01 ETA (66/74): perl-Scalar-List-Utils-1.48-1.fc27.ris 601 kB/s | 119 kB 00:00 (67-68/74): perl-int 94% [==================- ] 1.7 MB/s | 31 MB 00:01 ETA (67/74): perl-Unicode-Normalize-1.25-408.fc27.0 799 kB/s | 164 kB 00:00 (68-69/74): perl-int 95% [=================== ] 1.7 MB/s | 31 MB 00:00 ETA (68/74): perl-macros-5.26.1-408.fc28.1.riscv64. 717 kB/s | 69 kB 00:00 (69-70/74): expect-5 96% [=================== ] 1.7 MB/s | 31 MB 00:00 ETA (69/74): perl-threads-2.21-1.fc27.riscv64.rpm 706 kB/s | 104 kB 00:00 (70-71/74): expect-5 97% [===================-] 1.7 MB/s | 32 MB 00:00 ETA (70/74): expect-5.45.3-1.fc28.riscv64.rpm 659 kB/s | 564 kB 00:00 (71-72/74): perl-thr 98% [===================-] 1.7 MB/s | 32 MB 00:00 ETA (71/74): perl-threads-shared-1.58-1.fc27.riscv6 480 kB/s | 91 kB 00:00 (72/74): perl-interp 98% [===================-] 1.7 MB/s | 32 MB 00:00 ETA (72/74): perl-MIME-Base64-3.15-408.fc27.0.riscv 742 kB/s | 111 kB 00:00 (73-74/74): perl-Sto 99% [===================-] 1.7 MB/s | 32 MB 00:00 ETA (73/74): perl-interpreter-5.26.1-408.fc28.1.ris 633 kB/s | 6.7 MB 00:10 (74/74): perl-Storab 99% [===================-] 1.5 MB/s | 33 MB 00:00 ETA (74/74): perl-Storable-2.62-408.fc27.0.riscv64. 202 kB/s | 205 kB 00:01 -------------------------------------------------------------------------------- Total 1.8 MB/s | 33 MB 00:18 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 random: crng init done Installing : perl-Carp-1.42-408.fc27. [ ] 1/74 Installing : perl-Carp-1.42-408.fc27. [==== ] 1/74 Installing : perl-Carp-1.42-408.fc27. [======================== ] 1/74 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 1/74 Installing : perl-Exporter-5.72-408.f [ ] 2/74 Installing : perl-Exporter-5.72-408.f [===== ] 2/74 Installing : perl-Exporter-5.72-408.f [======= ] 2/74 Installing : perl-Exporter-5.72-408.f [==================== ] 2/74 Installing : perl-Exporter-5.72-408.f [======================== ] 2/74 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 2/74 Installing : perl-libs-4:5.26.1-408.f [ ] 3/74 Installing : perl-libs-4:5.26.1-408.f [= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [=== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [==== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [===== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [====== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [======= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [======== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [========= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [========== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [=========== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [============ ] 3/74 Installing : perl-libs-4:5.26.1-408.f [============= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [============== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [=============== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [================ ] 3/74 Installing : perl-libs-4:5.26.1-408.f [================= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [================== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [=================== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [==================== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [===================== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [====================== ] 3/74 Installing : perl-libs-4:5.26.1-408.f [======================= ] 3/74 Installing : perl-libs-4:5.26.1-408.f [======================== ] 3/74 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 3/74 Installing : perl-Scalar-List-Utils-3 [ ] 4/74 Installing : perl-Scalar-List-Utils-3 [= ] 4/74 Installing : perl-Scalar-List-Utils-3 [== ] 4/74 Installing : perl-Scalar-List-Utils-3 [=== ] 4/74 Installing : perl-Scalar-List-Utils-3 [===== ] 4/74 Installing : perl-Scalar-List-Utils-3 [======== ] 4/74 Installing : perl-Scalar-List-Utils-3 [========== ] 4/74 Installing : perl-Scalar-List-Utils-3 [============= ] 4/74 Installing : perl-Scalar-List-Utils-3 [================ ] 4/74 Installing : perl-Scalar-List-Utils-3 [================== ] 4/74 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/74 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/74 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/74 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/74 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/74 Installing : perl-Text-ParseWords-3.3 [ ] 5/74 Installing : perl-Text-ParseWords-3.3 [======= ] 5/74 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/74 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/74 Installing : python2-libs-2.7.14-9.fc [ ] 6/74 Installing : python2-libs-2.7.14-9.fc [= ] 6/74 Installing : python2-libs-2.7.14-9.fc [== ] 6/74 Installing : python2-libs-2.7.14-9.fc [=== ] 6/74 Installing : python2-libs-2.7.14-9.fc [==== ] 6/74 Installing : python2-libs-2.7.14-9.fc [===== ] 6/74 Installing : python2-libs-2.7.14-9.fc [====== ] 6/74 Installing : python2-libs-2.7.14-9.fc [======= ] 6/74 Installing : python2-libs-2.7.14-9.fc [======== ] 6/74 Installing : python2-libs-2.7.14-9.fc [========= ] 6/74 Installing : python2-libs-2.7.14-9.fc [========== ] 6/74 Installing : python2-libs-2.7.14-9.fc [=========== ] 6/74 Installing : python2-libs-2.7.14-9.fc [============ ] 6/74 Installing : python2-libs-2.7.14-9.fc [============= ] 6/74 Installing : python2-libs-2.7.14-9.fc [============== ] 6/74 Installing : python2-libs-2.7.14-9.fc [=============== ] 6/74 Installing : python2-libs-2.7.14-9.fc [================ ] 6/74 Installing : python2-libs-2.7.14-9.fc [================= ] 6/74 Installing : python2-libs-2.7.14-9.fc [================== ] 6/74 Installing : python2-libs-2.7.14-9.fc [=================== ] 6/74 Installing : python2-libs-2.7.14-9.fc [==================== ] 6/74 Installing : python2-libs-2.7.14-9.fc [===================== ] 6/74 Installing : python2-libs-2.7.14-9.fc [====================== ] 6/74 Installing : python2-libs-2.7.14-9.fc [======================= ] 6/74 Installing : python2-libs-2.7.14-9.fc [======================== ] 6/74 Installing : python2-libs-2.7.14-9.fc28.riscv64 6/74 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 6/74 Installing : python2-2.7.14-9.fc28.ri [ ] 7/74 Installing : python2-2.7.14-9.fc28.ri [====== ] 7/74 Installing : python2-2.7.14-9.fc28.ri [============== ] 7/74 Installing : python2-2.7.14-9.fc28.ri [==================== ] 7/74 Installing : python2-2.7.14-9.fc28.ri [======================= ] 7/74 Installing : python2-2.7.14-9.fc28.ri [======================== ] 7/74 Installing : python2-2.7.14-9.fc28.riscv64 7/74 Installing : python-srpm-macros-3-26. [ ] 8/74 Installing : python-srpm-macros-3-26. [======================= ] 8/74 Installing : python-srpm-macros-3-26.fc28.noarch 8/74 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 9/74 Installing : m4-1.4.18-5.fc28.riscv64 9/74 Running scriptlet: m4-1.4.18-5.fc28.riscv64 9/74 Installing : tcl-1:8.6.7-2.fc28.riscv [ ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [=== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [==== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [===== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [====== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [======= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [======== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [========= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [========== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [=========== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [============ ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [============= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [============== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [=============== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [================ ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [================= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [=================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [==================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [===================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [====================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [======================= ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv [======================== ] 10/74 Installing : tcl-1:8.6.7-2.fc28.riscv64 10/74 Running scriptlet: tcl-1:8.6.7-2.fc28.riscv64 10/74 Installing : expect-5.45.3-1.fc28.ris [ ] 11/74 Installing : expect-5.45.3-1.fc28.ris [= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [=== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [==== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [===== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [====== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [======= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [======== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [========= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [========== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [=========== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [============ ] 11/74 Installing : expect-5.45.3-1.fc28.ris [============= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [============== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [=============== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [================ ] 11/74 Installing : expect-5.45.3-1.fc28.ris [================= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [================== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [=================== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [==================== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [===================== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [====================== ] 11/74 Installing : expect-5.45.3-1.fc28.ris [======================= ] 11/74 Installing : expect-5.45.3-1.fc28.ris [======================== ] 11/74 Installing : expect-5.45.3-1.fc28.riscv64 11/74 Installing : python-rpm-macros-3-26.f [ ] 12/74 Installing : python-rpm-macros-3-26.f [======================= ] 12/74 Installing : python-rpm-macros-3-26.fc28.noarch 12/74 Installing : perl-Term-ANSIColor-4.06 [ ] 13/74 Installing : perl-Term-ANSIColor-4.06 [==== ] 13/74 Installing : perl-Term-ANSIColor-4.06 [================== ] 13/74 Installing : perl-Term-ANSIColor-4.06 [======================== ] 13/74 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 13/74 Installing : perl-macros-4:5.26.1-408 [ ] 14/74 Installing : perl-macros-4:5.26.1-408 [======================== ] 14/74 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 14/74 Installing : perl-Text-Tabs+Wrap-2013 [ ] 15/74 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 15/74 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 15/74 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 15/74 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 15/74 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 15/74 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 15/74 Installing : perl-Errno-1.28-408.fc28 [ ] 16/74 Installing : perl-Errno-1.28-408.fc28 [================= ] 16/74 Installing : perl-Errno-1.28-408.fc28 [======================== ] 16/74 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 16/74 Installing : perl-parent-1:0.236-408. [ ] 17/74 Installing : perl-parent-1:0.236-408. [============ ] 17/74 Installing : perl-parent-1:0.236-408. [======================== ] 17/74 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 17/74 Installing : perl-IO-1.38-408.fc28.1. [ ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [= ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [=== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [==== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [===== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [====== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [======= ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [======== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [============== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [================= ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 18/74 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 18/74 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 18/74 Installing : perl-Socket-4:2.027-1.fc [ ] 19/74 Installing : perl-Socket-4:2.027-1.fc [=== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [======= ] 19/74 Installing : perl-Socket-4:2.027-1.fc [========== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [============== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [================= ] 19/74 Installing : perl-Socket-4:2.027-1.fc [==================== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [===================== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [====================== ] 19/74 Installing : perl-Socket-4:2.027-1.fc [======================= ] 19/74 Installing : perl-Socket-4:2.027-1.fc [======================== ] 19/74 Installing : perl-Socket-4:2.027-1.fc27.riscv64 19/74 Installing : perl-constant-1.33-408.f [ ] 20/74 Installing : perl-constant-1.33-408.f [======= ] 20/74 Installing : perl-constant-1.33-408.f [======================== ] 20/74 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 20/74 Installing : perl-Unicode-Normalize-1 [ ] 21/74 Installing : perl-Unicode-Normalize-1 [= ] 21/74 Installing : perl-Unicode-Normalize-1 [== ] 21/74 Installing : perl-Unicode-Normalize-1 [=== ] 21/74 Installing : perl-Unicode-Normalize-1 [==== ] 21/74 Installing : perl-Unicode-Normalize-1 [===== ] 21/74 Installing : perl-Unicode-Normalize-1 [====== ] 21/74 Installing : perl-Unicode-Normalize-1 [======= ] 21/74 Installing : perl-Unicode-Normalize-1 [======== ] 21/74 Installing : perl-Unicode-Normalize-1 [========= ] 21/74 Installing : perl-Unicode-Normalize-1 [========== ] 21/74 Installing : perl-Unicode-Normalize-1 [============ ] 21/74 Installing : perl-Unicode-Normalize-1 [============= ] 21/74 Installing : perl-Unicode-Normalize-1 [============== ] 21/74 Installing : perl-Unicode-Normalize-1 [=============== ] 21/74 Installing : perl-Unicode-Normalize-1 [================ ] 21/74 Installing : perl-Unicode-Normalize-1 [================= ] 21/74 Installing : perl-Unicode-Normalize-1 [================== ] 21/74 Installing : perl-Unicode-Normalize-1 [=================== ] 21/74 Installing : perl-Unicode-Normalize-1 [==================== ] 21/74 Installing : perl-Unicode-Normalize-1 [===================== ] 21/74 Installing : perl-Unicode-Normalize-1 [====================== ] 21/74 Installing : perl-Unicode-Normalize-1 [======================= ] 21/74 Installing : perl-Unicode-Normalize-1 [======================== ] 21/74 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 21/74 Installing : perl-threads-shared-1.58 [ ] 22/74 Installing : perl-threads-shared-1.58 [=== ] 22/74 Installing : perl-threads-shared-1.58 [======= ] 22/74 Installing : perl-threads-shared-1.58 [========== ] 22/74 Installing : perl-threads-shared-1.58 [============== ] 22/74 Installing : perl-threads-shared-1.58 [================= ] 22/74 Installing : perl-threads-shared-1.58 [==================== ] 22/74 Installing : perl-threads-shared-1.58 [======================= ] 22/74 Installing : perl-threads-shared-1.58 [======================== ] 22/74 Installing : perl-threads-shared-1.58-1.fc27.riscv64 22/74 Installing : perl-threads-1:2.21-1.fc [ ] 23/74 Installing : perl-threads-1:2.21-1.fc [=== ] 23/74 Installing : perl-threads-1:2.21-1.fc [====== ] 23/74 Installing : perl-threads-1:2.21-1.fc [========= ] 23/74 Installing : perl-threads-1:2.21-1.fc [============= ] 23/74 Installing : perl-threads-1:2.21-1.fc [================ ] 23/74 Installing : perl-threads-1:2.21-1.fc [================== ] 23/74 Installing : perl-threads-1:2.21-1.fc [===================== ] 23/74 Installing : perl-threads-1:2.21-1.fc [====================== ] 23/74 Installing : perl-threads-1:2.21-1.fc [======================= ] 23/74 Installing : perl-threads-1:2.21-1.fc [======================== ] 23/74 Installing : perl-threads-1:2.21-1.fc27.riscv64 23/74 Installing : perl-interpreter-4:5.26. [ ] 24/74 Installing : perl-interpreter-4:5.26. [= ] 24/74 Installing : perl-interpreter-4:5.26. [== ] 24/74 Installing : perl-interpreter-4:5.26. [=== ] 24/74 Installing : perl-interpreter-4:5.26. [==== ] 24/74 Installing : perl-interpreter-4:5.26. [===== ] 24/74 Installing : perl-interpreter-4:5.26. [====== ] 24/74 Installing : perl-interpreter-4:5.26. [======= ] 24/74 Installing : perl-interpreter-4:5.26. [======== ] 24/74 Installing : perl-interpreter-4:5.26. [========= ] 24/74 Installing : perl-interpreter-4:5.26. [========== ] 24/74 Installing : perl-interpreter-4:5.26. [=========== ] 24/74 Installing : perl-interpreter-4:5.26. [============ ] 24/74 Installing : perl-interpreter-4:5.26. [============= ] 24/74 Installing : perl-interpreter-4:5.26. [============== ] 24/74 Installing : perl-interpreter-4:5.26. [=============== ] 24/74 Installing : perl-interpreter-4:5.26. [================ ] 24/74 Installing : perl-interpreter-4:5.26. [================= ] 24/74 Installing : perl-interpreter-4:5.26. [================== ] 24/74 Installing : perl-interpreter-4:5.26. [=================== ] 24/74 Installing : perl-interpreter-4:5.26. [==================== ] 24/74 Installing : perl-interpreter-4:5.26. [===================== ] 24/74 Installing : perl-interpreter-4:5.26. [====================== ] 24/74 Installing : perl-interpreter-4:5.26. [======================= ] 24/74 Installing : perl-interpreter-4:5.26. [======================== ] 24/74 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 24/74 Installing : perl-PathTools-3.67-408. [ ] 25/74 Installing : perl-PathTools-3.67-408. [== ] 25/74 Installing : perl-PathTools-3.67-408. [=== ] 25/74 Installing : perl-PathTools-3.67-408. [==== ] 25/74 Installing : perl-PathTools-3.67-408. [======= ] 25/74 Installing : perl-PathTools-3.67-408. [========= ] 25/74 Installing : perl-PathTools-3.67-408. [=========== ] 25/74 Installing : perl-PathTools-3.67-408. [============== ] 25/74 Installing : perl-PathTools-3.67-408. [================== ] 25/74 Installing : perl-PathTools-3.67-408. [==================== ] 25/74 Installing : perl-PathTools-3.67-408. [===================== ] 25/74 Installing : perl-PathTools-3.67-408. [====================== ] 25/74 Installing : perl-PathTools-3.67-408. [======================= ] 25/74 Installing : perl-PathTools-3.67-408. [======================== ] 25/74 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 25/74 Installing : perl-File-Path-2.15-1.fc [ ] 26/74 Installing : perl-File-Path-2.15-1.fc [==== ] 26/74 Installing : perl-File-Path-2.15-1.fc [======== ] 26/74 Installing : perl-File-Path-2.15-1.fc [==================== ] 26/74 Installing : perl-File-Path-2.15-1.fc [======================== ] 26/74 Installing : perl-File-Path-2.15-1.fc27.noarch 26/74 Installing : perl-File-Temp-0.230.400 [ ] 27/74 Installing : perl-File-Temp-0.230.400 [=== ] 27/74 Installing : perl-File-Temp-0.230.400 [============ ] 27/74 Installing : perl-File-Temp-0.230.400 [===================== ] 27/74 Installing : perl-File-Temp-0.230.400 [======================== ] 27/74 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 27/74 Installing : perl-Term-Cap-1.17-408.f [ ] 28/74 Installing : perl-Term-Cap-1.17-408.f [==== ] 28/74 Installing : perl-Term-Cap-1.17-408.f [======================== ] 28/74 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 28/74 Installing : perl-Pod-Escapes-1:1.07- [ ] 29/74 Installing : perl-Pod-Escapes-1:1.07- [==== ] 29/74 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 29/74 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/74 Installing : perl-MIME-Base64-3.15-40 [ ] 30/74 Installing : perl-MIME-Base64-3.15-40 [= ] 30/74 Installing : perl-MIME-Base64-3.15-40 [== ] 30/74 Installing : perl-MIME-Base64-3.15-40 [========== ] 30/74 Installing : perl-MIME-Base64-3.15-40 [================== ] 30/74 Installing : perl-MIME-Base64-3.15-40 [======================= ] 30/74 Installing : perl-MIME-Base64-3.15-40 [======================== ] 30/74 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 30/74 Installing : perl-Storable-1:2.62-408 [ ] 31/74 Installing : perl-Storable-1:2.62-408 [== ] 31/74 Installing : perl-Storable-1:2.62-408 [==== ] 31/74 Installing : perl-Storable-1:2.62-408 [====== ] 31/74 Installing : perl-Storable-1:2.62-408 [======== ] 31/74 Installing : perl-Storable-1:2.62-408 [========== ] 31/74 Installing : perl-Storable-1:2.62-408 [============ ] 31/74 Installing : perl-Storable-1:2.62-408 [============== ] 31/74 Installing : perl-Storable-1:2.62-408 [================ ] 31/74 Installing : perl-Storable-1:2.62-408 [================== ] 31/74 Installing : perl-Storable-1:2.62-408 [==================== ] 31/74 Installing : perl-Storable-1:2.62-408 [====================== ] 31/74 Installing : perl-Storable-1:2.62-408 [======================== ] 31/74 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 31/74 Installing : perl-Data-Dumper-2.167-4 [ ] 32/74 Installing : perl-Data-Dumper-2.167-4 [=== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [==== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [======== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [============ ] 32/74 Installing : perl-Data-Dumper-2.167-4 [=============== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [=================== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [====================== ] 32/74 Installing : perl-Data-Dumper-2.167-4 [======================= ] 32/74 Installing : perl-Data-Dumper-2.167-4 [======================== ] 32/74 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 32/74 Installing : perl-Time-Local-1:1.250- [ ] 33/74 Installing : perl-Time-Local-1:1.250- [= ] 33/74 Installing : perl-Time-Local-1:1.250- [===== ] 33/74 Installing : perl-Time-Local-1:1.250- [======== ] 33/74 Installing : perl-Time-Local-1:1.250- [========= ] 33/74 Installing : perl-Time-Local-1:1.250- [================= ] 33/74 Installing : perl-Time-Local-1:1.250- [=================== ] 33/74 Installing : perl-Time-Local-1:1.250- [======================== ] 33/74 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 33/74 Installing : perl-HTTP-Tiny-0.070-408 [ ] 34/74 Installing : perl-HTTP-Tiny-0.070-408 [== ] 34/74 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 34/74 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 34/74 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 34/74 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 34/74 Installing : perl-Pod-Simple-1:3.35-4 [ ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 35/74 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 35/74 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 35/74 Installing : perl-Encode-4:2.94-16.fc [ ] 36/74 Installing : perl-Encode-4:2.94-16.fc [= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [=== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [==== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [===== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [====== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [======= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [======== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [========= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [========== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [=========== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [============ ] 36/74 Installing : perl-Encode-4:2.94-16.fc [============= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [============== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [=============== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [================ ] 36/74 Installing : perl-Encode-4:2.94-16.fc [================= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [=================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [==================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [===================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [====================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc [======================= ] 36/74 Installing : perl-Encode-4:2.94-16.fc [======================== ] 36/74 Installing : perl-Encode-4:2.94-16.fc27.riscv64 36/74 Installing : perl-Getopt-Long-1:2.50- [ ] 37/74 Installing : perl-Getopt-Long-1:2.50- [=== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [==== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [===== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [====== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [======= ] 37/74 Installing : perl-Getopt-Long-1:2.50- [========= ] 37/74 Installing : perl-Getopt-Long-1:2.50- [=============== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [===================== ] 37/74 Installing : perl-Getopt-Long-1:2.50- [======================== ] 37/74 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 37/74 Installing : perl-Pod-Usage-4:1.69-40 [ ] 38/74 Installing : perl-Pod-Usage-4:1.69-40 [== ] 38/74 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 38/74 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 38/74 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 38/74 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 38/74 Installing : perl-podlators-4.09-408. [ ] 39/74 Installing : perl-podlators-4.09-408. [= ] 39/74 Installing : perl-podlators-4.09-408. [== ] 39/74 Installing : perl-podlators-4.09-408. [=== ] 39/74 Installing : perl-podlators-4.09-408. [==== ] 39/74 Installing : perl-podlators-4.09-408. [===== ] 39/74 Installing : perl-podlators-4.09-408. [====== ] 39/74 Installing : perl-podlators-4.09-408. [======= ] 39/74 Installing : perl-podlators-4.09-408. [=========== ] 39/74 Installing : perl-podlators-4.09-408. [=============== ] 39/74 Installing : perl-podlators-4.09-408. [================ ] 39/74 Installing : perl-podlators-4.09-408. [================= ] 39/74 Installing : perl-podlators-4.09-408. [===================== ] 39/74 Installing : perl-podlators-4.09-408. [====================== ] 39/74 Installing : perl-podlators-4.09-408. [======================= ] 39/74 Installing : perl-podlators-4.09-408. [======================== ] 39/74 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 39/74 Installing : perl-Pod-Perldoc-3.28-40 [ ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [= ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 40/74 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 40/74 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 40/74 Installing : dwz-0.12-5.fc28.riscv64 [ ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 41/74 Installing : dwz-0.12-5.fc28.riscv64 41/74 Installing : perl-srpm-macros-1-26.fc [ ] 42/74 Installing : perl-srpm-macros-1-26.fc [====================== ] 42/74 Installing : perl-srpm-macros-1-26.fc28.noarch 42/74 Installing : go-srpm-macros-2-11.fc28 [ ] 43/74 Installing : go-srpm-macros-2-11.fc28 [====================== ] 43/74 Installing : go-srpm-macros-2-11.fc28.noarch 43/74 Installing : gnat-srpm-macros-4-5.fc2 [ ] 44/74 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 44/74 Installing : gnat-srpm-macros-4-5.fc28.noarch 44/74 Installing : ghc-srpm-macros-1.4.2-7. [ ] 45/74 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 45/74 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 45/74 Installing : fpc-srpm-macros-1.1-4.fc [ ] 46/74 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 46/74 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 46/74 Installing : libpkgconf-1.4.1-1.fc27. [ ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 47/74 Installing : libpkgconf-1.4.1-1.fc27.riscv64 47/74 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 47/74 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 48/74 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 48/74 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 48/74 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 48/74 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 48/74 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 48/74 Installing : pkgconf-1.4.1-1.fc27.riscv64 48/74 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 49/74 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 49/74 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 49/74 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 49/74 Installing : pkgconf-pkg-config-1.4.1 [ ] 50/74 Installing : pkgconf-pkg-config-1.4.1 [==== ] 50/74 Installing : pkgconf-pkg-config-1.4.1 [===== ] 50/74 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 50/74 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 50/74 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 50/74 Installing : file-5.32-3.fc28.riscv64 [ ] 51/74 Installing : file-5.32-3.fc28.riscv64 [====== ] 51/74 Installing : file-5.32-3.fc28.riscv64 [=========== ] 51/74 Installing : file-5.32-3.fc28.riscv64 [================== ] 51/74 Installing : file-5.32-3.fc28.riscv64 [===================== ] 51/74 Installing : file-5.32-3.fc28.riscv64 [====================== ] 51/74 Installing : file-5.32-3.fc28.riscv64 [======================= ] 51/74 Installing : file-5.32-3.fc28.riscv64 [======================== ] 51/74 Installing : file-5.32-3.fc28.riscv64 51/74 Installing : rust-srpm-macros-5-1.fc2 [ ] 52/74 Installing : rust-srpm-macros-5-1.fc2 [=== ] 52/74 Installing : rust-srpm-macros-5-1.fc2 [===== ] 52/74 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 52/74 Installing : rust-srpm-macros-5-1.fc28.noarch 52/74 Installing : qt5-srpm-macros-5.10.0-1 [ ] 53/74 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 53/74 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 53/74 Installing : openblas-srpm-macros-2-2 [ ] 54/74 Installing : openblas-srpm-macros-2-2 [================ ] 54/74 Installing : openblas-srpm-macros-2-2.fc27.noarch 54/74 Installing : ocaml-srpm-macros-5-2.fc [ ] 55/74 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 55/74 Installing : ocaml-srpm-macros-5-2.fc27.noarch 55/74 Installing : nim-srpm-macros-1-1.fc28 [ ] 56/74 Installing : nim-srpm-macros-1-1.fc28 [=== ] 56/74 Installing : nim-srpm-macros-1-1.fc28 [===== ] 56/74 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 56/74 Installing : nim-srpm-macros-1-1.fc28.noarch 56/74 Installing : python3-setuptools-38.4. [ ] 57/74 Installing : python3-setuptools-38.4. [= ] 57/74 Installing : python3-setuptools-38.4. [== ] 57/74 Installing : python3-setuptools-38.4. [=== ] 57/74 Installing : python3-setuptools-38.4. [==== ] 57/74 Installing : python3-setuptools-38.4. [===== ] 57/74 Installing : python3-setuptools-38.4. [====== ] 57/74 Installing : python3-setuptools-38.4. [======= ] 57/74 Installing : python3-setuptools-38.4. [======== ] 57/74 Installing : python3-setuptools-38.4. [========= ] 57/74 Installing : python3-setuptools-38.4. [========== ] 57/74 Installing : python3-setuptools-38.4. [=========== ] 57/74 Installing : python3-setuptools-38.4. [============ ] 57/74 Installing : python3-setuptools-38.4. [============= ] 57/74 Installing : python3-setuptools-38.4. [============== ] 57/74 Installing : python3-setuptools-38.4. [=============== ] 57/74 Installing : python3-setuptools-38.4. [================ ] 57/74 Installing : python3-setuptools-38.4. [================= ] 57/74 Installing : python3-setuptools-38.4. [================== ] 57/74 Installing : python3-setuptools-38.4. [=================== ] 57/74 Installing : python3-setuptools-38.4. [==================== ] 57/74 Installing : python3-setuptools-38.4. [===================== ] 57/74 Installing : python3-setuptools-38.4. [====================== ] 57/74 Installing : python3-setuptools-38.4. [======================= ] 57/74 Installing : python3-setuptools-38.4. [======================== ] 57/74 Installing : python3-setuptools-38.4.0-3.fc28.noarch 57/74 Installing : python3-rpm-generators-5 [ ] 58/74 Installing : python3-rpm-generators-5 [===== ] 58/74 Installing : python3-rpm-generators-5 [=================== ] 58/74 Installing : python3-rpm-generators-5 [======================== ] 58/74 Installing : python3-rpm-generators-5-1.fc28.noarch 58/74 Installing : python2-rpm-macros-3-26. [ ] 59/74 Installing : python2-rpm-macros-3-26. [======================= ] 59/74 Installing : python2-rpm-macros-3-26.fc28.noarch 59/74 Installing : unzip-6.0-36.fc28.riscv6 [ ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 60/74 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 60/74 Installing : unzip-6.0-36.fc28.riscv64 60/74 Installing : zip-3.0-20.fc28.riscv64 [ ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [=== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [==== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [===== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [====== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [======= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [======== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [========= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [========== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [============ ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [============= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [============== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [================ ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [================= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 61/74 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 61/74 Installing : zip-3.0-20.fc28.riscv64 61/74 Installing : redhat-rpm-config-96-1.f [ ] 62/74 Installing : redhat-rpm-config-96-1.f [== ] 62/74 Installing : redhat-rpm-config-96-1.f [=== ] 62/74 Installing : redhat-rpm-config-96-1.f [========= ] 62/74 Installing : redhat-rpm-config-96-1.f [=========== ] 62/74 Installing : redhat-rpm-config-96-1.f [================= ] 62/74 Installing : redhat-rpm-config-96-1.f [================== ] 62/74 Installing : redhat-rpm-config-96-1.f [=================== ] 62/74 Installing : redhat-rpm-config-96-1.f [===================== ] 62/74 Installing : redhat-rpm-config-96-1.f [====================== ] 62/74 Installing : redhat-rpm-config-96-1.f [======================== ] 62/74 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 62/74 Installing : ncurses-c++-libs-6.1-2.2 [ ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [=== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [==== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [===== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [====== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [======= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [======== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [========= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [========== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [=========== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [============ ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [============= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [============== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [=============== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [================ ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [================= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [=================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [==================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [===================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [====================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [======================= ] 63/74 Installing : ncurses-c++-libs-6.1-2.2 [======================== ] 63/74 Installing : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 63/74 Installing : libtool-ltdl-2.4.6-21.fc [ ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [==== ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [======== ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [============= ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [================= ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [===================== ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc [======================== ] 64/74 Installing : libtool-ltdl-2.4.6-21.fc27.riscv64 64/74 Running scriptlet: libtool-ltdl-2.4.6-21.fc27.riscv64 64/74 Installing : libtool-ltdl-devel-2.4.6 [ ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [=== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [==== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [===== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [====== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [======= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [======== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [========= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [========== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [=========== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [============ ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [============= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [============== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [=============== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [================ ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [================= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [=================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [==================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [===================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [====================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [======================= ] 65/74 Installing : libtool-ltdl-devel-2.4.6 [======================== ] 65/74 Installing : libtool-ltdl-devel-2.4.6-21.fc27.riscv64 65/74 Installing : ncurses-devel-6.1-2.2018 [ ] 66/74 Installing : ncurses-devel-6.1-2.2018 [= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [=== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [==== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [===== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [====== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [======= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [======== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [========= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [========== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [=========== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [============ ] 66/74 Installing : ncurses-devel-6.1-2.2018 [============= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [============== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [=============== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [================ ] 66/74 Installing : ncurses-devel-6.1-2.2018 [================= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [================== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [=================== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [==================== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [===================== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [====================== ] 66/74 Installing : ncurses-devel-6.1-2.2018 [======================= ] 66/74 Installing : ncurses-devel-6.1-2.2018 [======================== ] 66/74 Installing : ncurses-devel-6.1-2.20180129.fc27.riscv64 66/74 Installing : python2-devel-2.7.14-9.f [ ] 67/74 Installing : python2-devel-2.7.14-9.f [= ] 67/74 Installing : python2-devel-2.7.14-9.f [== ] 67/74 Installing : python2-devel-2.7.14-9.f [=== ] 67/74 Installing : python2-devel-2.7.14-9.f [==== ] 67/74 Installing : python2-devel-2.7.14-9.f [===== ] 67/74 Installing : python2-devel-2.7.14-9.f [====== ] 67/74 Installing : python2-devel-2.7.14-9.f [======= ] 67/74 Installing : python2-devel-2.7.14-9.f [======== ] 67/74 Installing : python2-devel-2.7.14-9.f [========= ] 67/74 Installing : python2-devel-2.7.14-9.f [========== ] 67/74 Installing : python2-devel-2.7.14-9.f [=========== ] 67/74 Installing : python2-devel-2.7.14-9.f [============ ] 67/74 Installing : python2-devel-2.7.14-9.f [============= ] 67/74 Installing : python2-devel-2.7.14-9.f [============== ] 67/74 Installing : python2-devel-2.7.14-9.f [=============== ] 67/74 Installing : python2-devel-2.7.14-9.f [================ ] 67/74 Installing : python2-devel-2.7.14-9.f [================= ] 67/74 Installing : python2-devel-2.7.14-9.f [================== ] 67/74 Installing : python2-devel-2.7.14-9.f [=================== ] 67/74 Installing : python2-devel-2.7.14-9.f [==================== ] 67/74 Installing : python2-devel-2.7.14-9.f [===================== ] 67/74 Installing : python2-devel-2.7.14-9.f [====================== ] 67/74 Installing : python2-devel-2.7.14-9.f [======================= ] 67/74 Installing : python2-devel-2.7.14-9.f [======================== ] 67/74 Installing : python2-devel-2.7.14-9.fc28.riscv64 67/74 Installing : libffi-devel-3.1-9.fc27. [ ] 68/74 Installing : libffi-devel-3.1-9.fc27. [=========== ] 68/74 Installing : libffi-devel-3.1-9.fc27. [=============== ] 68/74 Installing : libffi-devel-3.1-9.fc27. [================ ] 68/74 Installing : libffi-devel-3.1-9.fc27. [====================== ] 68/74 Installing : libffi-devel-3.1-9.fc27. [======================= ] 68/74 Installing : libffi-devel-3.1-9.fc27. [======================== ] 68/74 Installing : libffi-devel-3.1-9.fc27.0.riscv64.riscv64 68/74 Running scriptlet: libffi-devel-3.1-9.fc27.0.riscv64.riscv64 68/74 Installing : groff-1.22.3-8.fc27.risc [ ] 69/74 Installing : groff-1.22.3-8.fc27.risc [= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [=== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [==== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [===== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [====== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [======= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [======== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [========= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [========== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [=========== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [============ ] 69/74 Installing : groff-1.22.3-8.fc27.risc [============= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [============== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [=============== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [================ ] 69/74 Installing : groff-1.22.3-8.fc27.risc [================= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [================== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [=================== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [==================== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [===================== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [====================== ] 69/74 Installing : groff-1.22.3-8.fc27.risc [======================= ] 69/74 Installing : groff-1.22.3-8.fc27.risc [======================== ] 69/74 Installing : groff-1.22.3-8.fc27.riscv64 69/74 Running scriptlet: groff-1.22.3-8.fc27.riscv64 69/74 Installing : dejagnu-1:1.6-3.fc27.noa [ ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [=== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [==== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [===== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [====== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [======= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [======== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [========= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [========== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [=========== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [============ ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [============= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [============== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [=============== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [================ ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [================= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [=================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [==================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [===================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [====================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [======================= ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noa [======================== ] 70/74 Installing : dejagnu-1:1.6-3.fc27.noarch 70/74 Running scriptlet: dejagnu-1:1.6-3.fc27.noarch 70/74 Installing : tcl-devel-1:8.6.7-2.fc28 [ ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [=== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [==== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [===== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [====== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [======= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [======== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [========= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [========== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [=========== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [============ ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [============= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [============== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [=============== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [================ ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [================= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [=================== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [==================== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [===================== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [====================== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [======================= ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28 [======================== ] 71/74 Installing : tcl-devel-1:8.6.7-2.fc28.riscv64 71/74 Installing : bison-3.0.4-8.fc28.riscv [ ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [=== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [==== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [===== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [====== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [======= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [======== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [========= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [========== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [=========== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [============ ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [============= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [============== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [=============== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [================ ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [================= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [=================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [==================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [===================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [====================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [======================= ] 72/74 Installing : bison-3.0.4-8.fc28.riscv [======================== ] 72/74 Installing : bison-3.0.4-8.fc28.riscv64 72/74 Running scriptlet: bison-3.0.4-8.fc28.riscv64 72/74 Installing : flex-2.6.1-5.fc27.riscv6 [ ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [=== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [==== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [===== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [====== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [======= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [======== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [========= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [========== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [=========== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [============ ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [============= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [============== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [=============== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [================ ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [================= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [=================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [==================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [===================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [====================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [======================= ] 73/74 Installing : flex-2.6.1-5.fc27.riscv6 [======================== ] 73/74 Installing : flex-2.6.1-5.fc27.riscv64 73/74 Running scriptlet: flex-2.6.1-5.fc27.riscv64 73/74 Installing : chrpath-0.16-6.fc28.risc [ ] 74/74 Installing : chrpath-0.16-6.fc28.risc [======== ] 74/74 Installing : chrpath-0.16-6.fc28.risc [=============== ] 74/74 Installing : chrpath-0.16-6.fc28.risc [================ ] 74/74 Installing : chrpath-0.16-6.fc28.risc [================== ] 74/74 Installing : chrpath-0.16-6.fc28.risc [=================== ] 74/74 Installing : chrpath-0.16-6.fc28.risc [==================== ] 74/74 Installing : chrpath-0.16-6.fc28.risc [======================== ] 74/74 Installing : chrpath-0.16-6.fc28.riscv64 74/74 Running scriptlet: chrpath-0.16-6.fc28.riscv64 74/74 Verifying : groff-1.22.3-8.fc27.riscv64 1/74 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 2/74 Verifying : bison-3.0.4-8.fc28.riscv64 3/74 Verifying : chrpath-0.16-6.fc28.riscv64 4/74 Verifying : dejagnu-1:1.6-3.fc27.noarch 5/74 Verifying : flex-2.6.1-5.fc27.riscv64 6/74 Verifying : libffi-devel-3.1-9.fc27.0.riscv64.riscv64 7/74 Verifying : libtool-ltdl-devel-2.4.6-21.fc27.riscv64 8/74 Verifying : libtool-ltdl-2.4.6-21.fc27.riscv64 9/74 Verifying : ncurses-devel-6.1-2.20180129.fc27.riscv64 10/74 Verifying : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 11/74 Verifying : python2-devel-2.7.14-9.fc28.riscv64 12/74 Verifying : python2-2.7.14-9.fc28.riscv64 13/74 Verifying : python2-libs-2.7.14-9.fc28.riscv64 14/74 Verifying : tcl-devel-1:8.6.7-2.fc28.riscv64 15/74 Verifying : tcl-1:8.6.7-2.fc28.riscv64 16/74 Verifying : zip-3.0-20.fc28.riscv64 17/74 Verifying : unzip-6.0-36.fc28.riscv64 18/74 Verifying : python-rpm-macros-3-26.fc28.noarch 19/74 Verifying : python2-rpm-macros-3-26.fc28.noarch 20/74 Verifying : python3-rpm-generators-5-1.fc28.noarch 21/74 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 22/74 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 23/74 Verifying : nim-srpm-macros-1-1.fc28.noarch 24/74 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 25/74 Verifying : openblas-srpm-macros-2-2.fc27.noarch 26/74 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 27/74 Verifying : rust-srpm-macros-5-1.fc28.noarch 28/74 Verifying : file-5.32-3.fc28.riscv64 29/74 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 30/74 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 31/74 Verifying : pkgconf-1.4.1-1.fc27.riscv64 32/74 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 33/74 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 34/74 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 35/74 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 36/74 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 37/74 Verifying : m4-1.4.18-5.fc28.riscv64 38/74 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 39/74 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 40/74 Verifying : gnat-srpm-macros-4-5.fc28.noarch 41/74 Verifying : go-srpm-macros-2-11.fc28.noarch 42/74 Verifying : perl-srpm-macros-1-26.fc28.noarch 43/74 Verifying : python-srpm-macros-3-26.fc28.noarch 44/74 Verifying : dwz-0.12-5.fc28.riscv64 45/74 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 46/74 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 47/74 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 48/74 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 49/74 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 50/74 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 51/74 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 52/74 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 53/74 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 54/74 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 55/74 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 56/74 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 57/74 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 58/74 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 59/74 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 60/74 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 61/74 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 62/74 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 63/74 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 64/74 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 65/74 Verifying : perl-File-Path-2.15-1.fc27.noarch 66/74 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 67/74 Verifying : expect-5.45.3-1.fc28.riscv64 68/74 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 69/74 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 70/74 Verifying : perl-threads-1:2.21-1.fc27.riscv64 71/74 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 72/74 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 73/74 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 74/74 Installed: bison.riscv64 3.0.4-8.fc28 chrpath.riscv64 0.16-6.fc28 dejagnu.noarch 1:1.6-3.fc27 flex.riscv64 2.6.1-5.fc27 groff.riscv64 1.22.3-8.fc27 libffi-devel.riscv64 3.1-9.fc27.0.riscv64 libtool-ltdl-devel.riscv64 2.4.6-21.fc27 ncurses-devel.riscv64 6.1-2.20180129.fc27 perl-podlators.noarch 4.09-408.fc27.0.riscv64 python2-devel.riscv64 2.7.14-9.fc28 tcl-devel.riscv64 1:8.6.7-2.fc28 zip.riscv64 3.0-20.fc28 dwz.riscv64 0.12-5.fc28 expect.riscv64 5.45.3-1.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 libtool-ltdl.riscv64 2.4.6-21.fc27 m4.riscv64 1.4.18-5.fc28 ncurses-c++-libs.riscv64 6.1-2.20180129.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-srpm-macros.noarch 1-26.fc28 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-setuptools.noarch 38.4.0-3.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 tcl.riscv64 1:8.6.7-2.fc28 unzip.riscv64 6.0-36.fc28 Complete! + dnf -y update --best Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 2.9 MB/s | 911 kB 00:03 ETA Local RPMS 15% [=== ] 2.9 MB/s | 1.8 MB 00:03 ETA Local RPMS 24% [====- ] 3.0 MB/s | 2.9 MB 00:02 ETA Local RPMS 33% [======- ] 3.0 MB/s | 3.9 MB 00:02 ETA Local RPMS 42% [========- ] 3.0 MB/s | 4.9 MB 00:02 ETA Local RPMS 51% [========== ] 3.0 MB/s | 5.9 MB 00:01 ETA Local RPMS 59% [===========- ] 2.9 MB/s | 6.8 MB 00:01 ETA Local RPMS 67% [=============- ] 2.9 MB/s | 7.8 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 8.8 MB 00:00 ETA Local RPMS 84% [================- ] 2.9 MB/s | 9.8 MB 00:00 ETA Local RPMS 93% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 12 MB 00:04 Last metadata expiration check: 0:01:23 ago on Wed Feb 21 23:01:16 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:01:52 ago on Wed Feb 21 23:01:16 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group xz tar which diffutils util-linux bzip2 patch unzip grep info gzip coreutils fedora-release cpio rpm-build shadow-utils findutils redhat-rpm-config sed bash gawk make ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): tar-1.29-7 6% [= ] 2.4 MB/s | 751 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 905 kB/s | 486 kB 00:00 (2-3/11): diffutils- 12% [==- ] 2.4 MB/s | 1.4 MB 00:04 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 764 kB/s | 577 kB 00:00 (3-4/11): rpm-build- 14% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 645 kB/s | 235 kB 00:00 (4-5/11): zstd-1.3.3 18% [===- ] 2.4 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 687 kB/s | 805 kB 00:01 (5-6/11): which-2.21 20% [==== ] 2.3 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 341 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.3 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 910 kB/s | 212 kB 00:00 (7-8/11): zstd-1.3.3 25% [===== ] 2.3 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 742 kB/s | 270 kB 00:00 (8-9/11): zstd-1.3.3 27% [===== ] 2.3 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 468 kB/s | 81 kB 00:00 (9-10/11): zstd-1.3. 28% [=====- ] 2.3 MB/s | 3.2 MB 00:03 ETA (9-11/11): binutils- 36% [======= ] 2.3 MB/s | 4.1 MB 00:03 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 726 kB/s | 1.1 MB 00:01 (10-11/11): binutils 44% [========- ] 2.3 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 817 kB/s | 791 kB 00:00 (11/11): binutils-2. 46% [========= ] 2.3 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 53% [==========- ] 2.3 MB/s | 6.2 MB 00:02 ETA (11/11): binutils-2. 61% [============ ] 2.4 MB/s | 7.1 MB 00:01 ETA (11/11): binutils-2. 69% [=============- ] 2.4 MB/s | 8.0 MB 00:01 ETA (11/11): binutils-2. 77% [=============== ] 2.4 MB/s | 8.8 MB 00:01 ETA (11/11): binutils-2. 84% [================- ] 2.5 MB/s | 9.7 MB 00:00 ETA (11/11): binutils-2. 92% [==================- ] 2.5 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.9 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 2.1 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:03:30 ago on Wed Feb 21 23:01:16 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 547 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 655 kB/s | 46 kB 00:03 ETA (2-4/4): glibc-heade 35% [======= ] 788 kB/s | 910 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 807 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 842 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 89% [=================- ] 980 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 955 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 979 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 991 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off