OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 19:15:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/libwvstreams.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1GQsvc + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf wvstreams-4.6.1 + /usr/bin/gzip -dc /builddir/build/SOURCES/wvstreams-4.6.1.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd wvstreams-4.6.1 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #1 (wvstreams-4.2.2-multilib.patch):' Patch #1 (wvstreams-4.2.2-multilib.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .multilib --fuzz=0 patching file include/wvautoconf.h.in Hunk #2 succeeded at 169 (offset 3 lines). Hunk #3 succeeded at 204 (offset 3 lines). + echo 'Patch #2 (wvstreams-4.5-noxplctarget.patch):' Patch #2 (wvstreams-4.5-noxplctarget.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .xplctarget --fuzz=0 patching file install.mk + echo 'Patch #3 (wvstreams-4.6.1-make.patch):' Patch #3 (wvstreams-4.6.1-make.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .make --fuzz=0 patching file Makefile patching file wvrules.mk + echo 'Patch #4 (wvstreams-4.6.1-statinclude.patch):' Patch #4 (wvstreams-4.6.1-statinclude.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .statinclude --fuzz=0 patching file include/wvunixdgsocket.h patching file streams/wvatomicfile.cc + echo 'Patch #5 (wvstreams-4.6.1-gcc.patch):' Patch #5 (wvstreams-4.6.1-gcc.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc --fuzz=0 patching file crypto/wvx509.cc + echo 'Patch #6 (wvstreams-4.6.1-gcc47.patch):' Patch #6 (wvstreams-4.6.1-gcc47.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc47 --fuzz=0 patching file include/wvuid.h + echo 'Patch #7 (wvstreams-4.6.1-magic.patch):' Patch #7 (wvstreams-4.6.1-magic.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .magic --fuzz=0 patching file include/wvtask.h patching file utils/wvtask.cc + echo 'Patch #8 (0001-Use-explicit-cast-and-prevent-compiler-error.patch):' Patch #8 (0001-Use-explicit-cast-and-prevent-compiler-error.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .cast --fuzz=0 patching file streams/wvstream.cc + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mX1w2q + umask 022 + cd /builddir/build/BUILD + cd wvstreams-4.6.1 + export 'CXXFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls' + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls' + export 'CFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing' + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing' + touch configure + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-dbus=yes --with-pam --with-openssl --without-tcl --with-qt=no --disable-optimization configure: WARNING: unrecognized options: --disable-dependency-tracking checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for riscv64-redhat-linux-gnu-g++... no checking for riscv64-redhat-linux-gnu-c++... no checking for riscv64-redhat-linux-gnu-gpp... no checking for riscv64-redhat-linux-gnu-aCC... no checking for riscv64-redhat-linux-gnu-CC... no checking for riscv64-redhat-linux-gnu-cxx... no checking for riscv64-redhat-linux-gnu-cc++... no checking for riscv64-redhat-linux-gnu-cl.exe... no checking for riscv64-redhat-linux-gnu-FCC... no checking for riscv64-redhat-linux-gnu-KCC... no checking for riscv64-redhat-linux-gnu-RCC... no checking for riscv64-redhat-linux-gnu-xlC_r... no checking for riscv64-redhat-linux-gnu-xlC... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking how to run the C preprocessor... gcc -E checking how to run the C++ preprocessor... g++ -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... yes checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking target system type... riscv64-redhat-linux-gnu checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for __attribute__ ((deprecated))... yes checking argp.h usability... yes checking argp.h presence... yes checking for argp.h... yes checking for argp_parse... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for working alloca.h... yes checking for alloca... yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking for error_t... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for net/if.h... yes checking for net/ethernet.h... yes checking for netinet/if_ether.h... yes checking whether ETHER_ADDR_LEN is declared... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netinet/in_systm.h usability... yes checking netinet/in_systm.h presence... yes checking for netinet/in_systm.h... yes checking for netinet/ip.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking linux/serial.h usability... yes checking linux/serial.h presence... yes checking for linux/serial.h... yes checking for cfmakeraw... yes checking whether ln works...... yes checking whether __libc_stack_end is public... yes checking for pkg-config... /usr/bin/pkg-config checking Checking that D-Bus version greater than 1.2.14 installed.... yes checking dbus/dbus.h usability... no checking dbus/dbus.h presence... yes configure: WARNING: dbus/dbus.h: present but cannot be compiled configure: WARNING: dbus/dbus.h: check for missing prerequisite headers? configure: WARNING: dbus/dbus.h: see the Autoconf documentation configure: WARNING: dbus/dbus.h: section "Present But Cannot Be Compiled" configure: WARNING: dbus/dbus.h: proceeding with the preprocessor's result configure: WARNING: dbus/dbus.h: in the future, the compiler will take precedence configure: WARNING: ## ----------------------------------------------- ## configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ## configure: WARNING: ## ----------------------------------------------- ## checking for dbus/dbus.h... yes checking for bind in -lsocket... no checking for openssl/ssl.h... norandom: crng init done checking for X509_free in -lcrypto... yes checking for SSL_has_matching_session_id in -lssl... yes checking for POLICY_MAPPING_new in -lssl... yes checking readline/readline.h usability... no checking readline/readline.h presence... yes configure: WARNING: readline/readline.h: present but cannot be compiled configure: WARNING: readline/readline.h: check for missing prerequisite headers? configure: WARNING: readline/readline.h: see the Autoconf documentation configure: WARNING: readline/readline.h: section "Present But Cannot Be Compiled" configure: WARNING: readline/readline.h: proceeding with the preprocessor's result configure: WARNING: readline/readline.h: in the future, the compiler will take precedence configure: WARNING: ## ----------------------------------------------- ## configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ## configure: WARNING: ## ----------------------------------------------- ## checking for readline/readline.h... yes checking for readline in -lreadline... yes checking security/pam_appl.h usability... no checking security/pam_appl.h presence... no checking for security/pam_appl.h... no checking for pam_start in -lpam... no checking for sane PAM implementation... no checking for valgrind... no checking valgrind/memcheck.h usability... no checking valgrind/memcheck.h presence... no checking for valgrind/memcheck.h... no checking zlib.h usability... no checking zlib.h presence... yes configure: WARNING: zlib.h: present but cannot be compiled configure: WARNING: zlib.h: check for missing prerequisite headers? configure: WARNING: zlib.h: see the Autoconf documentation configure: WARNING: zlib.h: section "Present But Cannot Be Compiled" configure: WARNING: zlib.h: proceeding with the preprocessor's result configure: WARNING: zlib.h: in the future, the compiler will take precedence configure: WARNING: ## ----------------------------------------------- ## configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ## configure: WARNING: ## ----------------------------------------------- ## checking for zlib.h... yes checking for compress in -lz... yes checking tr1/functional usability... no checking tr1/functional presence... yes configure: WARNING: tr1/functional: present but cannot be compiled configure: WARNING: tr1/functional: check for missing prerequisite headers? configure: WARNING: tr1/functional: see the Autoconf documentation configure: WARNING: tr1/functional: section "Present But Cannot Be Compiled" configure: WARNING: tr1/functional: proceeding with the preprocessor's result configure: WARNING: tr1/functional: in the future, the compiler will take precedence configure: WARNING: ## ----------------------------------------------- ## configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ## configure: WARNING: ## ----------------------------------------------- ## checking for tr1/functional... yes checking boost/function.hpp usability... no checking boost/function.hpp presence... no checking for boost/function.hpp... no checking boost/throw_exception.hpp usability... no checking boost/throw_exception.hpp presence... no checking for boost/throw_exception.hpp... no configure: WARNING: PAM is missing. configure: WARNING: Qt is missing. configure: WARNING: Valgrind is missing. configure: WARNING: OpenSSL is missing. configure: error: Required dependencies missing: OpenSSL>=0.9.7 error: Bad exit status from /var/tmp/rpm-tmp.mX1w2q (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.mX1w2q (%build) ++ cleanup ++ set +e ++ sync ++ sleep 5 ++ sync ++ mount.static -o remount,ro / ++ poweroff reboot: Power down Power off