OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 15:47:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libtrash-3.3-5.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libtrash.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 8% [=- ] 3.2 MB/s | 975 kB 00:03 ETA Local RPMS 16% [=== ] 3.2 MB/s | 1.8 MB 00:03 ETA Local RPMS 24% [====- ] 3.2 MB/s | 2.8 MB 00:02 ETA Local RPMS 33% [======- ] 3.2 MB/s | 3.9 MB 00:02 ETA Local RPMS 43% [========- ] 3.2 MB/s | 4.9 MB 00:02 ETA Local RPMS 52% [========== ] 3.2 MB/s | 6.0 MB 00:01 ETA Local RPMS 59% [===========- ] 3.0 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 3.0 MB/s | 7.7 MB 00:01 ETA Local RPMS 76% [=============== ] 3.0 MB/s | 8.7 MB 00:00 ETA Local RPMS 85% [================= ] 3.1 MB/s | 9.7 MB 00:00 ETA Local RPMS 93% [==================- ] 3.1 MB/s | 11 MB 00:00 ETA Local RPMS 2.5 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:22 ago on Wed Feb 21 15:47:33 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: perl riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k python2 riscv64 2.7.14-9.fc28 local 107 k Installing dependencies: make riscv64 1:4.2.1-6.fc27 local 486 k perl-Algorithm-Diff noarch 1.1903-8.fc27 local 50 k perl-Archive-Tar noarch 2.26-4.fc27 local 77 k perl-Attribute-Handlers noarch 0.99-408.fc28.1.riscv64 local 85 k perl-B-Debug noarch 1.26-1.fc27 local 25 k perl-CPAN noarch 2.18-408.fc27.0.riscv64 local 342 k perl-CPAN-Meta noarch 2.150010-408.fc27.0.riscv64 local 189 k perl-CPAN-Meta-Requirements noarch 2.140-408.fc27.0.riscv64 local 79 k perl-CPAN-Meta-YAML noarch 0.018-408.fc27.0.riscv64 local 77 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Compress-Raw-Bzip2 riscv64 2.074-408.fc27.0.riscv64 local 122 k perl-Compress-Raw-Zlib riscv64 2.076-1.fc28 local 124 k perl-Config-Perl-V noarch 0.28-408.fc27.0.riscv64 local 77 k perl-DB_File riscv64 1.840-408.fc27.0.riscv64 local 192 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Data-OptList noarch 0.110-5.fc27 local 30 k perl-Data-Section noarch 0.200007-2.fc27 local 29 k perl-Devel-PPPort riscv64 3.36-4.fc28 local 224 k perl-Devel-Peek riscv64 1.26-408.fc28.1.riscv64 local 120 k perl-Devel-SelfStubber noarch 1.06-408.fc28.1.riscv64 local 72 k perl-Digest noarch 1.17-408.fc27.0.riscv64 local 82 k perl-Digest-MD5 riscv64 2.55-408.fc27.0.riscv64 local 117 k perl-Digest-SHA riscv64 1:6.01-1.fc28 local 115 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Env noarch 1.04-408.fc27.0.riscv64 local 71 k perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-ExtUtils-CBuilder noarch 1:0.280230-1.fc27 local 47 k perl-ExtUtils-Command noarch 1:7.30-2.fc27 local 17 k perl-ExtUtils-Embed noarch 1.34-408.fc28.1.riscv64 local 75 k perl-ExtUtils-Install noarch 2.14-3.fc27 local 45 k perl-ExtUtils-MM-Utils noarch 1:7.30-2.fc27 local 15 k perl-ExtUtils-MakeMaker noarch 1:7.30-2.fc27 local 296 k perl-ExtUtils-Manifest noarch 1.70-408.fc27.0.riscv64 local 80 k perl-ExtUtils-Miniperl noarch 1.06-408.fc28.1.riscv64 local 73 k perl-ExtUtils-ParseXS noarch 1:3.35-1.fc27 local 81 k perl-File-Fetch noarch 0.56-1.fc27 local 32 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Filter riscv64 2:1.58-1.fc28 local 129 k perl-Filter-Simple noarch 0.94-1.fc27 local 27 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-IO-Compress noarch 2.074-408.fc27.0.riscv64 local 298 k perl-IO-Socket-IP noarch 0.39-4.fc27 local 45 k perl-IO-Zlib noarch 1:1.10-408.fc28.1.riscv64 local 77 k perl-IPC-Cmd noarch 2:0.98-4.fc27 local 41 k perl-IPC-SysV riscv64 2.07-408.fc27.0.riscv64 local 129 k perl-JSON-PP noarch 1:2.94-4.fc27 local 65 k perl-Locale-Codes noarch 3.55-1.fc27 local 304 k perl-Locale-Maketext noarch 1.28-408.fc27.0.riscv64 local 154 k perl-Locale-Maketext-Simple noarch 1:0.21-408.fc28.1.riscv64 local 75 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-MRO-Compat noarch 0.13-3.fc27 local 23 k perl-Math-BigInt noarch 1:1.9998.11-4.fc27 local 194 k perl-Math-BigInt-FastCalc riscv64 0.500.600-5.fc28 local 51 k perl-Math-BigRat noarch 0.2613-2.fc27 local 38 k perl-Math-Complex noarch 1.59-408.fc28.1.riscv64 local 105 k perl-Memoize noarch 1.03-408.fc28.1.riscv64 local 115 k perl-Module-Build noarch 2:0.42.24-4.fc27 local 271 k perl-Module-CoreList noarch 1:5.20180120-1.fc27 local 83 k perl-Module-CoreList-tools noarch 1:5.20180120-1.fc27 local 20 k perl-Module-Load noarch 1:0.32-408.fc27.0.riscv64 local 74 k perl-Module-Load-Conditional noarch 0.68-408.fc27.0.riscv64 local 78 k perl-Module-Loaded noarch 1:0.08-408.fc28.1.riscv64 local 71 k perl-Module-Metadata noarch 1.000033-408.fc27.0.riscv64 local 84 k perl-Net-Ping noarch 2.55-408.fc28.1.riscv64 local 98 k perl-Package-Generator noarch 1.106-10.fc27 local 26 k perl-Params-Check noarch 1:0.38-408.fc27.0.riscv64 local 79 k perl-Params-Util riscv64 1.07-20.fc28 local 67 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Perl-OSType noarch 1.010-408.fc27.0.riscv64 local 72 k perl-PerlIO-via-QuotedPrint noarch 0.08-408.fc27.0.riscv64 local 70 k perl-Pod-Checker noarch 4:1.73-408.fc27.0.riscv64 local 88 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Html noarch 1.22.02-408.fc28.1.riscv64 local 84 k perl-Pod-Parser noarch 1.63-408.fc27.0.riscv64 local 152 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-SelfLoader noarch 1.23-408.fc28.1.riscv64 local 79 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Software-License noarch 0.103012-7.fc27 local 128 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Sub-Exporter noarch 0.987-13.fc27 local 71 k perl-Sub-Install noarch 0.928-13.fc27 local 25 k perl-Sys-Syslog riscv64 0.35-408.fc27.0.riscv64 local 124 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Test noarch 1.30-408.fc28.1.riscv64 local 86 k perl-Test-Harness noarch 1:3.39-4.fc27 local 276 k perl-Test-Simple noarch 1:1.302103-1.fc27 local 485 k perl-Text-Balanced noarch 2.03-408.fc27.0.riscv64 local 101 k perl-Text-Diff noarch 1.44-5.fc27 local 43 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Text-Template noarch 1.47-3.fc27 local 66 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-HiRes riscv64 1.9753-1.fc28 local 93 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Time-Piece riscv64 1.31-408.fc28.1.riscv64 local 122 k perl-Unicode-Collate riscv64 1.25-1.fc28 local 672 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-autodie noarch 2.29-408.fc27.0.riscv64 local 139 k perl-bignum noarch 0.47-408.fc27.0.riscv64 local 98 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-devel riscv64 4:5.26.1-408.fc28.1.riscv64 local 593 k perl-encoding riscv64 4:2.19-408.fc27.0.riscv64 local 84 k perl-experimental noarch 0.019-1.fc27 local 22 k perl-inc-latest noarch 2:0.500-8.fc27 local 24 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libnet noarch 3.11-1.fc27 local 119 k perl-libnetcfg noarch 4:5.26.1-408.fc28.1.riscv64 local 74 k perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-open noarch 1.11-408.fc28.1.riscv64 local 74 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-perlfaq noarch 5.021011-408.fc27.0.riscv64 local 441 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k perl-utils noarch 5.26.1-408.fc28.1.riscv64 local 125 k perl-version riscv64 6:0.99.18-5.fc28 local 99 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M Installing weak dependencies: perl-Encode-Locale noarch 1.05-8.fc27 local 20 k Transaction Summary ================================================================================ Install 129 Packages Total download size: 34 M Installed size: 105 M Downloading Packages: (1/129): perl-5.26.1 0% [ ] --- B/s | 0 B --:-- ETA (1/129): perl-5.26.1-408.fc28.1.riscv64.riscv64 468 kB/s | 69 kB 00:00 (2-3/129): perl-inte 0% [ ] 1.5 MB/s | 228 kB 00:22 ETA (2-4/129): perl-deve 3% [- ] 1.6 MB/s | 1.1 MB 00:20 ETA (2/129): perl-devel-5.26.1-408.fc28.1.riscv64.r 826 kB/s | 593 kB 00:00 (3-4/129): perl-inte 5% [= ] 1.6 MB/s | 1.8 MB 00:19 ETA (3/129): perl-Errno-1.28-408.fc28.1.riscv64.ris 822 kB/s | 73 kB 00:00 (4-5/129): perl-inte 5% [= ] 1.6 MB/s | 2.0 MB 00:19 ETA (4/129): perl-utils-5.26.1-408.fc28.1.riscv64.n 899 kB/s | 125 kB 00:00 (5-6/129): perl-inte 6% [= ] 1.7 MB/s | 2.4 MB 00:18 ETA (5/129): python2-2.7.14-9.fc28.riscv64.rpm 838 kB/s | 107 kB 00:00 (6-7/129): perl-inte 7% [=- ] 1.7 MB/s | 2.7 MB 00:18 ETA (6-8/129): perl-libs 10% [== ] 1.7 MB/s | 3.5 MB 00:17 ETA (6-8/129): perl-libs 13% [==- ] 1.8 MB/s | 4.4 MB 00:16 ETA (6-8/129): perl-libs 15% [=== ] 1.9 MB/s | 5.3 MB 00:15 ETA (6-8/129): perl-libs 18% [===- ] 2.0 MB/s | 6.2 MB 00:14 ETA (6-8/129): python2-l 21% [==== ] 2.0 MB/s | 7.1 MB 00:13 ETA (6-8/129): python2-l 23% [====- ] 2.1 MB/s | 8.1 MB 00:12 ETA (6-8/129): python2-l 26% [===== ] 2.1 MB/s | 8.9 MB 00:11 ETA (6-8/129): perl-inte 29% [=====- ] 2.2 MB/s | 9.9 MB 00:10 ETA (6/129): perl-libs-5.26.1-408.fc28.1.riscv64.ri 867 kB/s | 3.3 MB 00:03 (7-8/129): python2-l 29% [=====- ] 2.0 MB/s | 10 MB 00:11 ETA (7/129): perl-Carp-1.42-408.fc27.0.riscv64.noar 775 kB/s | 84 kB 00:00 (8-9/129): python2-l 30% [====== ] 2.0 MB/s | 10 MB 00:11 ETA (8/129): perl-Exporter-5.72-408.fc27.0.riscv64. 812 kB/s | 87 kB 00:00 (9-10/129): python2- 31% [====== ] 2.0 MB/s | 11 MB 00:11 ETA (9/129): perl-File-Path-2.15-1.fc27.noarch.rpm 621 kB/s | 37 kB 00:00 (10-11/129): python2 31% [====== ] 2.0 MB/s | 11 MB 00:11 ETA (10/129): perl-Text-Tabs+Wrap-2013.0523-408.fc2 772 kB/s | 80 kB 00:00 (11-12/129): perl-in 32% [======- ] 2.0 MB/s | 11 MB 00:11 ETA (11/129): perl-constant-1.33-408.fc27.0.riscv64 852 kB/s | 79 kB 00:00 (12-13/129): perl-in 33% [======- ] 2.0 MB/s | 11 MB 00:11 ETA (12/129): perl-parent-0.236-408.fc27.0.riscv64. 710 kB/s | 71 kB 00:00 (13-14/129): perl-in 33% [======- ] 2.0 MB/s | 11 MB 00:11 ETA (13/129): perl-IO-1.38-408.fc28.1.riscv64.riscv 839 kB/s | 176 kB 00:00 (14-15/129): perl-in 35% [======= ] 2.0 MB/s | 12 MB 00:10 ETA (14/129): perl-PathTools-3.67-408.fc27.0.riscv6 822 kB/s | 166 kB 00:00 (15-16/129): perl-in 37% [======= ] 2.0 MB/s | 13 MB 00:10 ETA (15/129): perl-Scalar-List-Utils-1.48-1.fc27.ri 824 kB/s | 119 kB 00:00 (16-17/129): python2 38% [=======- ] 2.0 MB/s | 13 MB 00:10 ETA (16/129): perl-Unicode-Normalize-1.25-408.fc27. 833 kB/s | 164 kB 00:00 (17-18/129): python2 39% [=======- ] 2.0 MB/s | 13 MB 00:09 ETA (17/129): perl-macros-5.26.1-408.fc28.1.riscv64 730 kB/s | 69 kB 00:00 (18-19/129): python2 40% [======== ] 2.0 MB/s | 14 MB 00:09 ETA (18/129): perl-threads-2.21-1.fc27.riscv64.rpm 868 kB/s | 104 kB 00:00 (19-20/129): python2 41% [======== ] 2.0 MB/s | 14 MB 00:09 ETA (19/129): perl-threads-shared-1.58-1.fc27.riscv 810 kB/s | 91 kB 00:00 (20-21/129): python2 42% [======== ] 2.0 MB/s | 14 MB 00:09 ETA (20/129): perl-ExtUtils-Install-2.14-3.fc27.noa 706 kB/s | 45 kB 00:00 (21-22/129): python2 42% [======== ] 2.0 MB/s | 14 MB 00:09 ETA (21/129): perl-ExtUtils-ParseXS-3.35-1.fc27.noa 758 kB/s | 81 kB 00:00 (22-23/129): python2 43% [========- ] 2.0 MB/s | 15 MB 00:09 ETA (22/129): perl-Getopt-Long-2.50-3.fc27.noarch.r 778 kB/s | 61 kB 00:00 (23-24/129): python2 43% [========- ] 2.0 MB/s | 15 MB 00:09 ETA (23/129): perl-Socket-2.027-1.fc27.riscv64.rpm 842 kB/s | 95 kB 00:00 (24-25/129): perl-in 44% [========- ] 2.0 MB/s | 15 MB 00:09 ETA (24/129): perl-Archive-Tar-2.26-4.fc27.noarch.r 816 kB/s | 77 kB 00:00 (25-26/129): perl-in 45% [========= ] 2.0 MB/s | 15 MB 00:09 ETA (25/129): perl-Text-Diff-1.44-5.fc27.noarch.rpm 684 kB/s | 43 kB 00:00 (26-27/129): perl-in 45% [========= ] 2.0 MB/s | 15 MB 00:09 ETA (26/129): perl-Algorithm-Diff-1.1903-8.fc27.noa 665 kB/s | 50 kB 00:00 (27-28/129): perl-in 46% [========= ] 2.0 MB/s | 16 MB 00:09 ETA (27/129): perl-Attribute-Handlers-0.99-408.fc28 767 kB/s | 85 kB 00:00 (28-29/129): perl-in 47% [========= ] 2.0 MB/s | 16 MB 00:08 ETA (28/129): perl-B-Debug-1.26-1.fc27.noarch.rpm 597 kB/s | 25 kB 00:00 (29-30/129): perl-in 47% [========= ] 2.0 MB/s | 16 MB 00:08 ETA (29-31/129): perl-in 49% [=========- ] 2.0 MB/s | 17 MB 00:08 ETA (29/129): perl-CPAN-2.18-408.fc27.0.riscv64.noa 873 kB/s | 342 kB 00:00 (30-31/129): python2 50% [========== ] 2.0 MB/s | 17 MB 00:08 ETA (30/129): perl-Module-Build-0.42.24-4.fc27.noar 911 kB/s | 271 kB 00:00 (31-32/129): python2 52% [==========- ] 2.1 MB/s | 18 MB 00:07 ETA (31/129): perl-Software-License-0.103012-7.fc27 823 kB/s | 128 kB 00:00 (32-33/129): python2 53% [==========- ] 2.1 MB/s | 18 MB 00:07 ETA (32/129): perl-inc-latest-0.500-8.fc27.noarch.r 550 kB/s | 24 kB 00:00 (33-34/129): python2 54% [==========- ] 2.0 MB/s | 18 MB 00:07 ETA (33/129): perl-Data-Section-0.200007-2.fc27.noa 645 kB/s | 29 kB 00:00 (34-35/129): python2 54% [==========- ] 2.0 MB/s | 18 MB 00:07 ETA (34/129): perl-Text-Template-1.47-3.fc27.noarch 689 kB/s | 66 kB 00:00 (35-36/129): python2 54% [==========- ] 2.0 MB/s | 19 MB 00:07 ETA (35/129): perl-MRO-Compat-0.13-3.fc27.noarch.rp 539 kB/s | 23 kB 00:00 (36-37/129): python2 55% [=========== ] 2.0 MB/s | 19 MB 00:07 ETA (36/129): perl-Sub-Exporter-0.987-13.fc27.noarc 735 kB/s | 71 kB 00:00 (37-38/129): perl-in 55% [=========== ] 2.0 MB/s | 19 MB 00:07 ETA (37/129): perl-Data-OptList-0.110-5.fc27.noarch 635 kB/s | 30 kB 00:00 (38-39/129): perl-in 56% [=========== ] 2.0 MB/s | 19 MB 00:07 ETA (38/129): perl-Package-Generator-1.106-10.fc27. 557 kB/s | 26 kB 00:00 (39-40/129): perl-in 56% [=========== ] 2.0 MB/s | 19 MB 00:07 ETA (39/129): perl-Sub-Install-0.928-13.fc27.noarch 578 kB/s | 25 kB 00:00 (40-41/129): perl-in 56% [=========== ] 2.0 MB/s | 19 MB 00:07 ETA (40/129): perl-CPAN-Meta-2.150010-408.fc27.0.ri 898 kB/s | 189 kB 00:00 (41-42/129): perl-in 58% [===========- ] 2.0 MB/s | 20 MB 00:07 ETA (41/129): perl-interpreter-5.26.1-408.fc28.1.ri 710 kB/s | 6.7 MB 00:09 (42-43/129): perl-CP 58% [===========- ] 1.7 MB/s | 20 MB 00:08 ETA (42/129): perl-CPAN-Meta-Requirements-2.140-408 89 kB/s | 79 kB 00:00 (43-44/129): perl-CP 58% [===========- ] 1.7 MB/s | 20 MB 00:08 ETA (43/129): perl-CPAN-Meta-YAML-0.018-408.fc27.0. 557 kB/s | 77 kB 00:00 (44-45/129): perl-Co 59% [===========- ] 1.7 MB/s | 20 MB 00:08 ETA (44/129): perl-Config-Perl-V-0.28-408.fc27.0.ri 558 kB/s | 77 kB 00:00 (45-46/129): perl-De 59% [===========- ] 1.7 MB/s | 20 MB 00:08 ETA (45/129): perl-Devel-SelfStubber-1.06-408.fc28. 510 kB/s | 72 kB 00:00 (46-47/129): perl-Di 59% [===========- ] 1.7 MB/s | 20 MB 00:08 ETA (46/129): perl-Digest-1.17-408.fc27.0.riscv64.n 537 kB/s | 82 kB 00:00 (47-48/129): perl-En 60% [============ ] 1.7 MB/s | 20 MB 00:08 ETA (47/129): perl-Env-1.04-408.fc27.0.riscv64.noar 515 kB/s | 71 kB 00:00 (48-49/129): perl-Ex 60% [============ ] 1.7 MB/s | 20 MB 00:08 ETA (48/129): perl-ExtUtils-CBuilder-0.280230-1.fc2 454 kB/s | 47 kB 00:00 (49-50/129): perl-Ex 60% [============ ] 1.6 MB/s | 21 MB 00:08 ETA (49/129): perl-ExtUtils-Command-7.30-2.fc27.noa 266 kB/s | 17 kB 00:00 (50/129): python2-li 60% [============ ] 1.6 MB/s | 21 MB 00:08 ETA (50/129): perl-ExtUtils-Embed-1.34-408.fc28.1.r 645 kB/s | 75 kB 00:00 (51-52/129): python2 61% [============ ] 1.6 MB/s | 21 MB 00:07 ETA (51/129): perl-ExtUtils-Manifest-1.70-408.fc27. 738 kB/s | 80 kB 00:00 (52-53/129): python2 62% [============ ] 1.7 MB/s | 21 MB 00:07 ETA (52/129): perl-ExtUtils-Miniperl-1.06-408.fc28. 786 kB/s | 73 kB 00:00 (53-54/129): python2 62% [============- ] 1.7 MB/s | 21 MB 00:07 ETA (53/129): perl-File-Fetch-0.56-1.fc27.noarch.rp 700 kB/s | 32 kB 00:00 (54-55/129): python2 63% [============- ] 1.7 MB/s | 21 MB 00:07 ETA (54/129): perl-ExtUtils-MakeMaker-7.30-2.fc27.n 582 kB/s | 296 kB 00:00 (55-56/129): python2 63% [============- ] 1.6 MB/s | 21 MB 00:07 ETA (55/129): perl-Filter-Simple-0.94-1.fc27.noarch 623 kB/s | 27 kB 00:00 (56-57/129): python2 63% [============- ] 1.6 MB/s | 22 MB 00:07 ETA (56/129): perl-File-Temp-0.230.400-408.fc27.0.r 421 kB/s | 103 kB 00:00 (57-58/129): python2 64% [============- ] 1.6 MB/s | 22 MB 00:07 ETA (57/129): perl-HTTP-Tiny-0.070-408.fc27.0.riscv 537 kB/s | 97 kB 00:00 (58-59/129): python2 64% [============- ] 1.6 MB/s | 22 MB 00:07 ETA (58/129): perl-IO-Socket-IP-0.39-4.fc27.noarch. 697 kB/s | 45 kB 00:00 (59-60/129): python2 64% [============- ] 1.6 MB/s | 22 MB 00:07 ETA (59/129): perl-IO-Zlib-1.10-408.fc28.1.riscv64. 600 kB/s | 77 kB 00:00 (60-61/129): python2 65% [============= ] 1.6 MB/s | 22 MB 00:07 ETA (60/129): perl-IPC-Cmd-0.98-4.fc27.noarch.rpm 612 kB/s | 41 kB 00:00 (61-62/129): perl-IO 66% [============= ] 1.6 MB/s | 22 MB 00:06 ETA (61/129): perl-IO-Compress-2.074-408.fc27.0.ris 588 kB/s | 298 kB 00:00 (62-63/129): perl-JS 66% [============= ] 1.6 MB/s | 22 MB 00:06 ETA (62/129): perl-JSON-PP-2.94-4.fc27.noarch.rpm 378 kB/s | 65 kB 00:00 (63-64/129): perl-Lo 66% [============= ] 1.6 MB/s | 23 MB 00:06 ETA (63/129): perl-Locale-Maketext-1.28-408.fc27.0. 879 kB/s | 154 kB 00:00 (64-65/129): perl-Lo 68% [=============- ] 1.6 MB/s | 23 MB 00:06 ETA (64/129): perl-Locale-Maketext-Simple-0.21-408. 832 kB/s | 75 kB 00:00 (65-66/129): perl-Lo 68% [=============- ] 1.6 MB/s | 23 MB 00:06 ETA (65/129): perl-Locale-Codes-3.55-1.fc27.noarch. 628 kB/s | 304 kB 00:00 (66-67/129): perl-Ma 69% [=============- ] 1.6 MB/s | 23 MB 00:06 ETA (66/129): perl-Math-BigRat-0.2613-2.fc27.noarch 670 kB/s | 38 kB 00:00 (67-68/129): perl-Ma 69% [=============- ] 1.6 MB/s | 23 MB 00:06 ETA (67/129): perl-Math-Complex-1.59-408.fc28.1.ris 768 kB/s | 105 kB 00:00 (68-69/129): perl-Ma 70% [============== ] 1.6 MB/s | 24 MB 00:06 ETA (68/129): perl-Math-BigInt-1.9998.11-4.fc27.noa 489 kB/s | 194 kB 00:00 (69-70/129): perl-Me 70% [============== ] 1.6 MB/s | 24 MB 00:06 ETA (69/129): perl-Memoize-1.03-408.fc28.1.riscv64. 547 kB/s | 115 kB 00:00 (70-71/129): python2 71% [============== ] 1.6 MB/s | 24 MB 00:05 ETA (70/129): perl-Module-CoreList-5.20180120-1.fc2 566 kB/s | 83 kB 00:00 (71/129): python2-li 71% [============== ] 1.6 MB/s | 24 MB 00:05 ETA (71/129): perl-Module-CoreList-tools-5.20180120 347 kB/s | 20 kB 00:00 (72-73/129): python2 71% [============== ] 1.6 MB/s | 24 MB 00:05 ETA (72/129): perl-Module-Load-0.32-408.fc27.0.risc 535 kB/s | 74 kB 00:00 (73-74/129): python2 72% [============== ] 1.6 MB/s | 24 MB 00:05 ETA (73/129): perl-Module-Load-Conditional-0.68-408 558 kB/s | 78 kB 00:00 (74-75/129): python2 72% [============== ] 1.6 MB/s | 24 MB 00:05 ETA (74/129): perl-Module-Loaded-0.08-408.fc28.1.ri 517 kB/s | 71 kB 00:00 (75-76/129): python2 72% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (75/129): perl-Module-Metadata-1.000033-408.fc2 550 kB/s | 84 kB 00:00 (76-77/129): python2 73% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (76/129): perl-Net-Ping-2.55-408.fc28.1.riscv64 556 kB/s | 98 kB 00:00 (77-78/129): python2 73% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (77/129): perl-Params-Check-0.38-408.fc27.0.ris 498 kB/s | 79 kB 00:00 (78-79/129): python2 73% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (78/129): perl-Perl-OSType-1.010-408.fc27.0.ris 503 kB/s | 72 kB 00:00 (79-80/129): python2 74% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (79/129): perl-PerlIO-via-QuotedPrint-0.08-408. 522 kB/s | 70 kB 00:00 (80-81/129): python2 74% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (80/129): perl-Pod-Escapes-1.07-408.fc27.0.risc 849 kB/s | 77 kB 00:00 (81-82/129): perl-Po 74% [==============- ] 1.6 MB/s | 25 MB 00:05 ETA (81/129): perl-Pod-Checker-1.73-408.fc27.0.risc 402 kB/s | 88 kB 00:00 (82-83/129): perl-Po 75% [=============== ] 1.6 MB/s | 25 MB 00:05 ETA (82/129): perl-Pod-Html-1.22.02-408.fc28.1.risc 476 kB/s | 84 kB 00:00 (83-84/129): perl-Po 75% [=============== ] 1.6 MB/s | 26 MB 00:05 ETA (83/129): perl-Pod-Parser-1.63-408.fc27.0.riscv 666 kB/s | 152 kB 00:00 (84-85/129): perl-Po 76% [=============== ] 1.6 MB/s | 26 MB 00:05 ETA (84/129): perl-Pod-Perldoc-3.28-408.fc27.0.risc 615 kB/s | 139 kB 00:00 (85-86/129): perl-Po 77% [=============== ] 1.6 MB/s | 26 MB 00:04 ETA (85/129): perl-Pod-Usage-1.69-408.fc27.0.riscv6 875 kB/s | 89 kB 00:00 (86-87/129): perl-Po 77% [===============- ] 1.6 MB/s | 26 MB 00:04 ETA (86/129): python2-libs-2.7.14-9.fc28.riscv64.rp 602 kB/s | 8.1 MB 00:13 (87-88/129): perl-Po 77% [===============- ] 1.3 MB/s | 26 MB 00:05 ETA (87/129): perl-Pod-Simple-3.35-408.fc27.0.riscv 201 kB/s | 271 kB 00:01 (88-89/129): perl-Se 78% [===============- ] 1.3 MB/s | 27 MB 00:05 ETA (88/129): perl-SelfLoader-1.23-408.fc28.1.riscv 72 kB/s | 79 kB 00:01 (89/129): perl-Term- 78% [===============- ] 1.3 MB/s | 27 MB 00:05 ETA (89/129): perl-Term-ANSIColor-4.06-408.fc27.0.r 408 kB/s | 94 kB 00:00 (90-91/129): perl-Te 78% [===============- ] 1.3 MB/s | 27 MB 00:05 ETA (90/129): perl-Term-Cap-1.17-408.fc27.0.riscv64 463 kB/s | 78 kB 00:00 (91-92/129): perl-Te 79% [===============- ] 1.3 MB/s | 27 MB 00:05 ETA (91/129): perl-Test-1.30-408.fc28.1.riscv64.noa 393 kB/s | 86 kB 00:00 (92-93/129): perl-Te 79% [===============- ] 1.3 MB/s | 27 MB 00:05 ETA (92/129): perl-Text-Balanced-2.03-408.fc27.0.ri 739 kB/s | 101 kB 00:00 (93-94/129): perl-Te 80% [================ ] 1.3 MB/s | 27 MB 00:05 ETA (93/129): perl-Test-Harness-3.39-4.fc27.noarch. 599 kB/s | 276 kB 00:00 (94-95/129): perl-Te 81% [================ ] 1.3 MB/s | 27 MB 00:04 ETA (94/129): perl-Text-ParseWords-3.30-408.fc27.0. 522 kB/s | 73 kB 00:00 (95/129): perl-Test- 81% [================ ] 1.3 MB/s | 27 MB 00:04 ETA (95/129): perl-Time-Local-1.250-394.fc27.noarch 697 kB/s | 30 kB 00:00 (96-97/129): perl-Th 81% [================ ] 1.3 MB/s | 28 MB 00:04 ETA (96/129): perl-Thread-Queue-3.12-408.fc27.0.ris 508 kB/s | 77 kB 00:00 (97-98/129): perl-au 81% [================ ] 1.3 MB/s | 28 MB 00:04 ETA (97/129): perl-autodie-2.29-408.fc27.0.riscv64. 703 kB/s | 139 kB 00:00 (98-99/129): perl-bi 82% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (98/129): perl-bignum-0.47-408.fc27.0.riscv64.n 556 kB/s | 98 kB 00:00 (99-100/129): perl-e 82% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (99/129): perl-experimental-0.019-1.fc27.noarch 228 kB/s | 22 kB 00:00 (100-101/129): perl- 82% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (100/129): perl-Test-Simple-1.302103-1.fc27.noa 521 kB/s | 485 kB 00:00 (101-102/129): perl- 83% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (101/129): perl-libnetcfg-5.26.1-408.fc28.1.ris 396 kB/s | 74 kB 00:00 (102-103/129): perl- 83% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (102/129): perl-libnet-3.11-1.fc27.noarch.rpm 374 kB/s | 119 kB 00:00 (103-104/129): perl- 83% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (103/129): perl-open-1.11-408.fc28.1.riscv64.no 375 kB/s | 74 kB 00:00 (104-105/129): perl- 83% [================- ] 1.3 MB/s | 28 MB 00:04 ETA (104/129): perl-version-0.99.18-5.fc28.riscv64. 781 kB/s | 99 kB 00:00 (105-106/129): perl- 84% [================- ] 1.3 MB/s | 29 MB 00:03 ETA (105/129): perl-podlators-4.09-408.fc27.0.riscv 586 kB/s | 157 kB 00:00 (106-107/129): perl- 85% [================= ] 1.3 MB/s | 29 MB 00:03 ETA (106/129): perl-Compress-Raw-Bzip2-2.074-408.fc 601 kB/s | 122 kB 00:00 (107-108/129): perl- 85% [================= ] 1.3 MB/s | 29 MB 00:03 ETA (107/129): perl-Compress-Raw-Zlib-2.076-1.fc28. 612 kB/s | 124 kB 00:00 (108-109/129): perl- 86% [================= ] 1.3 MB/s | 29 MB 00:03 ETA (108/129): perl-perlfaq-5.021011-408.fc27.0.ris 555 kB/s | 441 kB 00:00 (109-110/129): perl- 87% [================= ] 1.4 MB/s | 30 MB 00:03 ETA (109/129): perl-Data-Dumper-2.167-408.fc27.0.ri 589 kB/s | 149 kB 00:00 (110-111/129): perl- 87% [================= ] 1.3 MB/s | 30 MB 00:03 ETA (110/129): perl-DB_File-1.840-408.fc27.0.riscv6 441 kB/s | 192 kB 00:00 (111-112/129): perl- 87% [=================- ] 1.3 MB/s | 30 MB 00:03 ETA (111/129): perl-Devel-Peek-1.26-408.fc28.1.risc 597 kB/s | 120 kB 00:00 (112-113/129): perl- 88% [=================- ] 1.3 MB/s | 30 MB 00:02 ETA (112/129): perl-Digest-MD5-2.55-408.fc27.0.risc 642 kB/s | 117 kB 00:00 (113-114/129): perl- 88% [=================- ] 1.3 MB/s | 30 MB 00:02 ETA (113/129): perl-Devel-PPPort-3.36-4.fc28.riscv6 463 kB/s | 224 kB 00:00 (114-115/129): perl- 89% [=================- ] 1.3 MB/s | 30 MB 00:02 ETA (114/129): perl-Digest-SHA-6.01-1.fc28.riscv64. 418 kB/s | 115 kB 00:00 (115-116/129): perl- 89% [=================- ] 1.3 MB/s | 30 MB 00:02 ETA (115/129): perl-Filter-1.58-1.fc28.riscv64.rpm 565 kB/s | 129 kB 00:00 (116-117/129): perl- 90% [================== ] 1.4 MB/s | 31 MB 00:02 ETA (116/129): perl-IPC-SysV-2.07-408.fc27.0.riscv6 575 kB/s | 129 kB 00:00 (117-118/129): perl- 90% [================== ] 1.4 MB/s | 31 MB 00:02 ETA (117/129): perl-MIME-Base64-3.15-408.fc27.0.ris 640 kB/s | 111 kB 00:00 (118-119/129): perl- 91% [================== ] 1.4 MB/s | 31 MB 00:02 ETA (118/129): perl-Math-BigInt-FastCalc-0.500.600- 442 kB/s | 51 kB 00:00 (119/129): perl-Enco 91% [================== ] 1.4 MB/s | 31 MB 00:02 ETA (119/129): perl-Sys-Syslog-0.35-408.fc27.0.risc 773 kB/s | 124 kB 00:00 (120-121/129): perl- 92% [================== ] 1.4 MB/s | 31 MB 00:01 ETA (120/129): perl-Storable-2.62-408.fc27.0.riscv6 675 kB/s | 205 kB 00:00 (121-122/129): perl- 93% [==================- ] 1.4 MB/s | 31 MB 00:01 ETA (121/129): perl-Time-HiRes-1.9753-1.fc28.riscv6 542 kB/s | 93 kB 00:00 (122-123/129): perl- 93% [==================- ] 1.4 MB/s | 32 MB 00:01 ETA (122/129): perl-Time-Piece-1.31-408.fc28.1.risc 578 kB/s | 122 kB 00:00 (123-124/129): perl- 94% [==================- ] 1.4 MB/s | 32 MB 00:01 ETA (123/129): perl-encoding-2.19-408.fc27.0.riscv6 640 kB/s | 84 kB 00:00 (124-125/129): perl- 95% [=================== ] 1.4 MB/s | 32 MB 00:01 ETA (124/129): perl-ExtUtils-MM-Utils-7.30-2.fc27.n 267 kB/s | 15 kB 00:00 (125-126/129): perl- 95% [=================== ] 1.4 MB/s | 32 MB 00:01 ETA (125/129): perl-Params-Util-1.07-20.fc28.riscv6 640 kB/s | 67 kB 00:00 (126-127/129): perl- 96% [=================== ] 1.4 MB/s | 33 MB 00:00 ETA (126-128/129): perl- 98% [===================-] 1.5 MB/s | 33 MB 00:00 ETA (126/129): perl-Unicode-Collate-1.25-1.fc28.ris 711 kB/s | 672 kB 00:00 (127-128/129): make- 98% [===================-] 1.5 MB/s | 33 MB 00:00 ETA (127/129): perl-Encode-Locale-1.05-8.fc27.noarc 400 kB/s | 20 kB 00:00 (128-129/129): make- 99% [===================-] 1.5 MB/s | 34 MB 00:00 ETA (128/129): make-4.2.1-6.fc27.riscv64.rpm 764 kB/s | 486 kB 00:00 (129/129): perl-Enco 99% [===================-] 1.5 MB/s | 34 MB 00:00 ETA (129/129): perl-Encode-2.94-16.fc27.riscv64.rpm 620 kB/s | 1.4 MB 00:02 -------------------------------------------------------------------------------- Total 1.6 MB/s | 34 MB 00:21 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1random: crng init done Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : [================================================== ] 1/1 Preparing : 1/1 Installing : perl-Carp-1.42-408.fc27 [ ] 1/129 Installing : perl-Carp-1.42-408.fc27 [=== ] 1/129 Installing : perl-Carp-1.42-408.fc27 [==== ] 1/129 Installing : perl-Carp-1.42-408.fc27 [======================= ] 1/129 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 1/129 Installing : perl-Exporter-5.72-408. [ ] 2/129 Installing : perl-Exporter-5.72-408. [===== ] 2/129 Installing : perl-Exporter-5.72-408. [====== ] 2/129 Installing : perl-Exporter-5.72-408. [=================== ] 2/129 Installing : perl-Exporter-5.72-408. [======================= ] 2/129 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 2/129 Installing : perl-libs-4:5.26.1-408. [ ] 3/129 Installing : perl-libs-4:5.26.1-408. [= ] 3/129 Installing : perl-libs-4:5.26.1-408. [== ] 3/129 Installing : perl-libs-4:5.26.1-408. [=== ] 3/129 Installing : perl-libs-4:5.26.1-408. [==== ] 3/129 Installing : perl-libs-4:5.26.1-408. [===== ] 3/129 Installing : perl-libs-4:5.26.1-408. [====== ] 3/129 Installing : perl-libs-4:5.26.1-408. [======= ] 3/129 Installing : perl-libs-4:5.26.1-408. [======== ] 3/129 Installing : perl-libs-4:5.26.1-408. [========= ] 3/129 Installing : perl-libs-4:5.26.1-408. [========== ] 3/129 Installing : perl-libs-4:5.26.1-408. [=========== ] 3/129 Installing : perl-libs-4:5.26.1-408. [============ ] 3/129 Installing : perl-libs-4:5.26.1-408. [============= ] 3/129 Installing : perl-libs-4:5.26.1-408. [============== ] 3/129 Installing : perl-libs-4:5.26.1-408. [=============== ] 3/129 Installing : perl-libs-4:5.26.1-408. [================ ] 3/129 Installing : perl-libs-4:5.26.1-408. [================= ] 3/129 Installing : perl-libs-4:5.26.1-408. [================== ] 3/129 Installing : perl-libs-4:5.26.1-408. [=================== ] 3/129 Installing : perl-libs-4:5.26.1-408. [==================== ] 3/129 Installing : perl-libs-4:5.26.1-408. [===================== ] 3/129 Installing : perl-libs-4:5.26.1-408. [====================== ] 3/129 Installing : perl-libs-4:5.26.1-408. [======================= ] 3/129 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 3/129 Installing : perl-Scalar-List-Utils- [ ] 4/129 Installing : perl-Scalar-List-Utils- [= ] 4/129 Installing : perl-Scalar-List-Utils- [== ] 4/129 Installing : perl-Scalar-List-Utils- [===== ] 4/129 Installing : perl-Scalar-List-Utils- [======= ] 4/129 Installing : perl-Scalar-List-Utils- [========== ] 4/129 Installing : perl-Scalar-List-Utils- [============ ] 4/129 Installing : perl-Scalar-List-Utils- [=============== ] 4/129 Installing : perl-Scalar-List-Utils- [================== ] 4/129 Installing : perl-Scalar-List-Utils- [==================== ] 4/129 Installing : perl-Scalar-List-Utils- [===================== ] 4/129 Installing : perl-Scalar-List-Utils- [====================== ] 4/129 Installing : perl-Scalar-List-Utils- [======================= ] 4/129 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/129 Installing : perl-Text-ParseWords-3. [ ] 5/129 Installing : perl-Text-ParseWords-3. [======= ] 5/129 Installing : perl-Text-ParseWords-3. [======================= ] 5/129 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noa 5/129 Installing : perl-Perl-OSType-1.010- [ ] 6/129 Installing : perl-Perl-OSType-1.010- [========= ] 6/129 Installing : perl-Perl-OSType-1.010- [======================= ] 6/129 Installing : perl-Perl-OSType-1.010-408.fc27.0.riscv64.noarch 6/129 Installing : perl-Term-ANSIColor-4.0 [ ] 7/129 Installing : perl-Term-ANSIColor-4.0 [==== ] 7/129 Installing : perl-Term-ANSIColor-4.0 [================= ] 7/129 Installing : perl-Term-ANSIColor-4.0 [======================= ] 7/129 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noar 7/129 Installing : perl-Time-HiRes-1.9753- [ ] 8/129 Installing : perl-Time-HiRes-1.9753- [== ] 8/129 Installing : perl-Time-HiRes-1.9753- [====== ] 8/129 Installing : perl-Time-HiRes-1.9753- [========== ] 8/129 Installing : perl-Time-HiRes-1.9753- [============= ] 8/129 Installing : perl-Time-HiRes-1.9753- [================= ] 8/129 Installing : perl-Time-HiRes-1.9753- [===================== ] 8/129 Installing : perl-Time-HiRes-1.9753- [====================== ] 8/129 Installing : perl-Time-HiRes-1.9753- [======================= ] 8/129 Installing : perl-Time-HiRes-1.9753-1.fc28.riscv64 8/129 Installing : perl-macros-4:5.26.1-40 [ ] 9/129 Installing : perl-macros-4:5.26.1-40 [======================= ] 9/129 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 9/129 Installing : perl-Errno-1.28-408.fc2 [ ] 10/129 Installing : perl-Errno-1.28-408.fc2 [================ ] 10/129 Installing : perl-Errno-1.28-408.fc2 [======================= ] 10/129 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 10/129 Installing : perl-Text-Tabs+Wrap-201 [ ] 11/129 Installing : perl-Text-Tabs+Wrap-201 [=== ] 11/129 Installing : perl-Text-Tabs+Wrap-201 [======== ] 11/129 Installing : perl-Text-Tabs+Wrap-201 [============= ] 11/129 Installing : perl-Text-Tabs+Wrap-201 [======================= ] 11/129 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64 11/129 Installing : perl-constant-1.33-408. [ ] 12/129 Installing : perl-constant-1.33-408. [====== ] 12/129 Installing : perl-constant-1.33-408. [======================= ] 12/129 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 12/129 Installing : perl-parent-1:0.236-408 [ ] 13/129 Installing : perl-parent-1:0.236-408 [============ ] 13/129 Installing : perl-parent-1:0.236-408 [======================= ] 13/129 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 13/129 Installing : perl-File-Path-2.15-1.f [ ] 14/129 Installing : perl-File-Path-2.15-1.f [=== ] 14/129 Installing : perl-File-Path-2.15-1.f [==== ] 14/129 Installing : perl-File-Path-2.15-1.f [======= ] 14/129 Installing : perl-File-Path-2.15-1.f [=================== ] 14/129 Installing : perl-File-Path-2.15-1.f [======================= ] 14/129 Installing : perl-File-Path-2.15-1.fc27.noarch 14/129 Installing : perl-PathTools-3.67-408 [ ] 15/129 Installing : perl-PathTools-3.67-408 [== ] 15/129 Installing : perl-PathTools-3.67-408 [=== ] 15/129 Installing : perl-PathTools-3.67-408 [==== ] 15/129 Installing : perl-PathTools-3.67-408 [====== ] 15/129 Installing : perl-PathTools-3.67-408 [======= ] 15/129 Installing : perl-PathTools-3.67-408 [========= ] 15/129 Installing : perl-PathTools-3.67-408 [========== ] 15/129 Installing : perl-PathTools-3.67-408 [============= ] 15/129 Installing : perl-PathTools-3.67-408 [================= ] 15/129 Installing : perl-PathTools-3.67-408 [=================== ] 15/129 Installing : perl-PathTools-3.67-408 [==================== ] 15/129 Installing : perl-PathTools-3.67-408 [===================== ] 15/129 Installing : perl-PathTools-3.67-408 [====================== ] 15/129 Installing : perl-PathTools-3.67-408 [======================= ] 15/129 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 15/129 Installing : perl-Unicode-Normalize- [ ] 16/129 Installing : perl-Unicode-Normalize- [= ] 16/129 Installing : perl-Unicode-Normalize- [== ] 16/129 Installing : perl-Unicode-Normalize- [=== ] 16/129 Installing : perl-Unicode-Normalize- [==== ] 16/129 Installing : perl-Unicode-Normalize- [===== ] 16/129 Installing : perl-Unicode-Normalize- [====== ] 16/129 Installing : perl-Unicode-Normalize- [======= ] 16/129 Installing : perl-Unicode-Normalize- [======== ] 16/129 Installing : perl-Unicode-Normalize- [========= ] 16/129 Installing : perl-Unicode-Normalize- [========== ] 16/129 Installing : perl-Unicode-Normalize- [=========== ] 16/129 Installing : perl-Unicode-Normalize- [============ ] 16/129 Installing : perl-Unicode-Normalize- [============= ] 16/129 Installing : perl-Unicode-Normalize- [============== ] 16/129 Installing : perl-Unicode-Normalize- [=============== ] 16/129 Installing : perl-Unicode-Normalize- [================ ] 16/129 Installing : perl-Unicode-Normalize- [================= ] 16/129 Installing : perl-Unicode-Normalize- [================== ] 16/129 Installing : perl-Unicode-Normalize- [=================== ] 16/129 Installing : perl-Unicode-Normalize- [==================== ] 16/129 Installing : perl-Unicode-Normalize- [===================== ] 16/129 Installing : perl-Unicode-Normalize- [====================== ] 16/129 Installing : perl-Unicode-Normalize- [======================= ] 16/129 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.r 16/129 Installing : perl-threads-shared-1.5 [ ] 17/129 Installing : perl-threads-shared-1.5 [=== ] 17/129 Installing : perl-threads-shared-1.5 [====== ] 17/129 Installing : perl-threads-shared-1.5 [========== ] 17/129 Installing : perl-threads-shared-1.5 [============= ] 17/129 Installing : perl-threads-shared-1.5 [================ ] 17/129 Installing : perl-threads-shared-1.5 [=================== ] 17/129 Installing : perl-threads-shared-1.5 [====================== ] 17/129 Installing : perl-threads-shared-1.5 [======================= ] 17/129 Installing : perl-threads-shared-1.58-1.fc27.riscv64 17/129 Installing : perl-threads-1:2.21-1.f [ ] 18/129 Installing : perl-threads-1:2.21-1.f [=== ] 18/129 Installing : perl-threads-1:2.21-1.f [====== ] 18/129 Installing : perl-threads-1:2.21-1.f [========= ] 18/129 Installing : perl-threads-1:2.21-1.f [============ ] 18/129 Installing : perl-threads-1:2.21-1.f [=============== ] 18/129 Installing : perl-threads-1:2.21-1.f [================= ] 18/129 Installing : perl-threads-1:2.21-1.f [==================== ] 18/129 Installing : perl-threads-1:2.21-1.f [===================== ] 18/129 Installing : perl-threads-1:2.21-1.f [====================== ] 18/129 Installing : perl-threads-1:2.21-1.f [======================= ] 18/129 Installing : perl-threads-1:2.21-1.fc27.riscv64 18/129 Installing : perl-IO-1.38-408.fc28.1 [ ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [=== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [==== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [====== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [======= ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [========== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [============= ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [================ ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [=================== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [==================== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [===================== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [====================== ] 19/129 Installing : perl-IO-1.38-408.fc28.1 [======================= ] 19/129 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/129 Installing : perl-interpreter-4:5.26 [ ] 20/129 Installing : perl-interpreter-4:5.26 [= ] 20/129 Installing : perl-interpreter-4:5.26 [== ] 20/129 Installing : perl-interpreter-4:5.26 [=== ] 20/129 Installing : perl-interpreter-4:5.26 [==== ] 20/129 Installing : perl-interpreter-4:5.26 [===== ] 20/129 Installing : perl-interpreter-4:5.26 [====== ] 20/129 Installing : perl-interpreter-4:5.26 [======= ] 20/129 Installing : perl-interpreter-4:5.26 [======== ] 20/129 Installing : perl-interpreter-4:5.26 [========= ] 20/129 Installing : perl-interpreter-4:5.26 [========== ] 20/129 Installing : perl-interpreter-4:5.26 [=========== ] 20/129 Installing : perl-interpreter-4:5.26 [============ ] 20/129 Installing : perl-interpreter-4:5.26 [============= ] 20/129 Installing : perl-interpreter-4:5.26 [============== ] 20/129 Installing : perl-interpreter-4:5.26 [=============== ] 20/129 Installing : perl-interpreter-4:5.26 [================ ] 20/129 Installing : perl-interpreter-4:5.26 [================= ] 20/129 Installing : perl-interpreter-4:5.26 [================== ] 20/129 Installing : perl-interpreter-4:5.26 [=================== ] 20/129 Installing : perl-interpreter-4:5.26 [==================== ] 20/129 Installing : perl-interpreter-4:5.26 [===================== ] 20/129 Installing : perl-interpreter-4:5.26 [====================== ] 20/129 Installing : perl-interpreter-4:5.26 [======================= ] 20/129 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.ris 20/129 Installing : perl-Socket-4:2.027-1.f [ ] 21/129 Installing : perl-Socket-4:2.027-1.f [=== ] 21/129 Installing : perl-Socket-4:2.027-1.f [====== ] 21/129 Installing : perl-Socket-4:2.027-1.f [========== ] 21/129 Installing : perl-Socket-4:2.027-1.f [============= ] 21/129 Installing : perl-Socket-4:2.027-1.f [================ ] 21/129 Installing : perl-Socket-4:2.027-1.f [=================== ] 21/129 Installing : perl-Socket-4:2.027-1.f [==================== ] 21/129 Installing : perl-Socket-4:2.027-1.f [===================== ] 21/129 Installing : perl-Socket-4:2.027-1.f [====================== ] 21/129 Installing : perl-Socket-4:2.027-1.f [======================= ] 21/129 Installing : perl-Socket-4:2.027-1.fc27.riscv64 21/129 Installing : perl-File-Temp-0.230.40 [ ] 22/129 Installing : perl-File-Temp-0.230.40 [=== ] 22/129 Installing : perl-File-Temp-0.230.40 [=========== ] 22/129 Installing : perl-File-Temp-0.230.40 [==================== ] 22/129 Installing : perl-File-Temp-0.230.40 [======================= ] 22/129 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noar 22/129 Installing : perl-version-6:0.99.18- [ ] 23/129 Installing : perl-version-6:0.99.18- [=== ] 23/129 Installing : perl-version-6:0.99.18- [====== ] 23/129 Installing : perl-version-6:0.99.18- [========== ] 23/129 Installing : perl-version-6:0.99.18- [============= ] 23/129 Installing : perl-version-6:0.99.18- [============== ] 23/129 Installing : perl-version-6:0.99.18- [=============== ] 23/129 Installing : perl-version-6:0.99.18- [================= ] 23/129 Installing : perl-version-6:0.99.18- [================== ] 23/129 Installing : perl-version-6:0.99.18- [==================== ] 23/129 Installing : perl-version-6:0.99.18- [====================== ] 23/129 Installing : perl-version-6:0.99.18- [======================= ] 23/129 Installing : perl-version-6:0.99.18-5.fc28.riscv64 23/129 Installing : perl-Data-Dumper-2.167- [ ] 24/129 Installing : perl-Data-Dumper-2.167- [=== ] 24/129 Installing : perl-Data-Dumper-2.167- [==== ] 24/129 Installing : perl-Data-Dumper-2.167- [======== ] 24/129 Installing : perl-Data-Dumper-2.167- [=========== ] 24/129 Installing : perl-Data-Dumper-2.167- [============== ] 24/129 Installing : perl-Data-Dumper-2.167- [================== ] 24/129 Installing : perl-Data-Dumper-2.167- [===================== ] 24/129 Installing : perl-Data-Dumper-2.167- [====================== ] 24/129 Installing : perl-Data-Dumper-2.167- [======================= ] 24/129 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv6 24/129 Installing : perl-ExtUtils-Manifest- [ ] 25/129 Installing : perl-ExtUtils-Manifest- [==== ] 25/129 Installing : perl-ExtUtils-Manifest- [===== ] 25/129 Installing : perl-ExtUtils-Manifest- [======================= ] 25/129 Installing : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.n 25/129 Installing : perl-MIME-Base64-3.15-4 [ ] 26/129 Installing : perl-MIME-Base64-3.15-4 [= ] 26/129 Installing : perl-MIME-Base64-3.15-4 [== ] 26/129 Installing : perl-MIME-Base64-3.15-4 [========== ] 26/129 Installing : perl-MIME-Base64-3.15-4 [================= ] 26/129 Installing : perl-MIME-Base64-3.15-4 [====================== ] 26/129 Installing : perl-MIME-Base64-3.15-4 [======================= ] 26/129 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 26/129 Installing : perl-Storable-1:2.62-40 [ ] 27/129 Installing : perl-Storable-1:2.62-40 [= ] 27/129 Installing : perl-Storable-1:2.62-40 [== ] 27/129 Installing : perl-Storable-1:2.62-40 [==== ] 27/129 Installing : perl-Storable-1:2.62-40 [====== ] 27/129 Installing : perl-Storable-1:2.62-40 [======== ] 27/129 Installing : perl-Storable-1:2.62-40 [========== ] 27/129 Installing : perl-Storable-1:2.62-40 [============ ] 27/129 Installing : perl-Storable-1:2.62-40 [============= ] 27/129 Installing : perl-Storable-1:2.62-40 [=============== ] 27/129 Installing : perl-Storable-1:2.62-40 [================= ] 27/129 Installing : perl-Storable-1:2.62-40 [=================== ] 27/129 Installing : perl-Storable-1:2.62-40 [===================== ] 27/129 Installing : perl-Storable-1:2.62-40 [======================= ] 27/129 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 27/129 Installing : perl-Time-Local-1:1.250 [ ] 28/129 Installing : perl-Time-Local-1:1.250 [= ] 28/129 Installing : perl-Time-Local-1:1.250 [===== ] 28/129 Installing : perl-Time-Local-1:1.250 [======== ] 28/129 Installing : perl-Time-Local-1:1.250 [================ ] 28/129 Installing : perl-Time-Local-1:1.250 [================== ] 28/129 Installing : perl-Time-Local-1:1.250 [======================= ] 28/129 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 28/129 Installing : perl-HTTP-Tiny-0.070-40 [ ] 29/129 Installing : perl-HTTP-Tiny-0.070-40 [== ] 29/129 Installing : perl-HTTP-Tiny-0.070-40 [=========== ] 29/129 Installing : perl-HTTP-Tiny-0.070-40 [==================== ] 29/129 Installing : perl-HTTP-Tiny-0.070-40 [======================= ] 29/129 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 29/129 Installing : perl-Digest-1.17-408.fc [ ] 30/129 Installing : perl-Digest-1.17-408.fc [===== ] 30/129 Installing : perl-Digest-1.17-408.fc [======= ] 30/129 Installing : perl-Digest-1.17-408.fc [========= ] 30/129 Installing : perl-Digest-1.17-408.fc [==================== ] 30/129 Installing : perl-Digest-1.17-408.fc [====================== ] 30/129 Installing : perl-Digest-1.17-408.fc [======================= ] 30/129 Installing : perl-Digest-1.17-408.fc27.0.riscv64.noarch 30/129 Installing : perl-Module-Metadata-1. [ ] 31/129 Installing : perl-Module-Metadata-1. [=== ] 31/129 Installing : perl-Module-Metadata-1. [======================= ] 31/129 Installing : perl-Module-Metadata-1.000033-408.fc27.0.riscv64 31/129 Installing : perl-SelfLoader-1.23-40 [ ] 32/129 Installing : perl-SelfLoader-1.23-40 [====== ] 32/129 Installing : perl-SelfLoader-1.23-40 [======================= ] 32/129 Installing : perl-SelfLoader-1.23-408.fc28.1.riscv64.noarch 32/129 Installing : perl-Filter-2:1.58-1.fc [ ] 33/129 Installing : perl-Filter-2:1.58-1.fc [== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [=== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [===== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [======= ] 33/129 Installing : perl-Filter-2:1.58-1.fc [========= ] 33/129 Installing : perl-Filter-2:1.58-1.fc [============ ] 33/129 Installing : perl-Filter-2:1.58-1.fc [============== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [================ ] 33/129 Installing : perl-Filter-2:1.58-1.fc [================== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [==================== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [===================== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [====================== ] 33/129 Installing : perl-Filter-2:1.58-1.fc [======================= ] 33/129 Installing : perl-Filter-2:1.58-1.fc28.riscv64 33/129 Installing : perl-Module-Load-1:0.32 [ ] 34/129 Installing : perl-Module-Load-1:0.32 [======= ] 34/129 Installing : perl-Module-Load-1:0.32 [======================= ] 34/129 Installing : perl-Module-Load-1:0.32-408.fc27.0.riscv64.noarc 34/129 Installing : perl-Text-Balanced-2.03 [ ] 35/129 Installing : perl-Text-Balanced-2.03 [==== ] 35/129 Installing : perl-Text-Balanced-2.03 [============= ] 35/129 Installing : perl-Text-Balanced-2.03 [======================= ] 35/129 Installing : perl-Text-Balanced-2.03-408.fc27.0.riscv64.noarc 35/129 Installing : perl-Digest-MD5-2.55-40 [ ] 36/129 Installing : perl-Digest-MD5-2.55-40 [== ] 36/129 Installing : perl-Digest-MD5-2.55-40 [======== ] 36/129 Installing : perl-Digest-MD5-2.55-40 [=============== ] 36/129 Installing : perl-Digest-MD5-2.55-40 [===================== ] 36/129 Installing : perl-Digest-MD5-2.55-40 [====================== ] 36/129 Installing : perl-Digest-MD5-2.55-40 [======================= ] 36/129 Installing : perl-Digest-MD5-2.55-408.fc27.0.riscv64.riscv64 36/129 Installing : perl-Module-CoreList-1: [ ] 37/129 Installing : perl-Module-CoreList-1: [= ] 37/129 Installing : perl-Module-CoreList-1: [== ] 37/129 Installing : perl-Module-CoreList-1: [=== ] 37/129 Installing : perl-Module-CoreList-1: [==== ] 37/129 Installing : perl-Module-CoreList-1: [===== ] 37/129 Installing : perl-Module-CoreList-1: [====== ] 37/129 Installing : perl-Module-CoreList-1: [======= ] 37/129 Installing : perl-Module-CoreList-1: [======== ] 37/129 Installing : perl-Module-CoreList-1: [========= ] 37/129 Installing : perl-Module-CoreList-1: [========== ] 37/129 Installing : perl-Module-CoreList-1: [=========== ] 37/129 Installing : perl-Module-CoreList-1: [============ ] 37/129 Installing : perl-Module-CoreList-1: [============= ] 37/129 Installing : perl-Module-CoreList-1: [============== ] 37/129 Installing : perl-Module-CoreList-1: [=============== ] 37/129 Installing : perl-Module-CoreList-1: [================ ] 37/129 Installing : perl-Module-CoreList-1: [================= ] 37/129 Installing : perl-Module-CoreList-1: [================== ] 37/129 Installing : perl-Module-CoreList-1: [=================== ] 37/129 Installing : perl-Module-CoreList-1: [==================== ] 37/129 Installing : perl-Module-CoreList-1: [===================== ] 37/129 Installing : perl-Module-CoreList-1: [====================== ] 37/129 Installing : perl-Module-CoreList-1: [======================= ] 37/129 Installing : perl-Module-CoreList-1:5.20180120-1.fc27.noarch 37/129 Installing : perl-Compress-Raw-Bzip2 [ ] 38/129 Installing : perl-Compress-Raw-Bzip2 [= ] 38/129 Installing : perl-Compress-Raw-Bzip2 [====== ] 38/129 Installing : perl-Compress-Raw-Bzip2 [=========== ] 38/129 Installing : perl-Compress-Raw-Bzip2 [=============== ] 38/129 Installing : perl-Compress-Raw-Bzip2 [==================== ] 38/129 Installing : perl-Compress-Raw-Bzip2 [======================= ] 38/129 Installing : perl-Compress-Raw-Bzip2-2.074-408.fc27.0.riscv64 38/129 Installing : perl-IO-Socket-IP-0.39- [ ] 39/129 Installing : perl-IO-Socket-IP-0.39- [== ] 39/129 Installing : perl-IO-Socket-IP-0.39- [====== ] 39/129 Installing : perl-IO-Socket-IP-0.39- [======= ] 39/129 Installing : perl-IO-Socket-IP-0.39- [============ ] 39/129 Installing : perl-IO-Socket-IP-0.39- [============== ] 39/129 Installing : perl-IO-Socket-IP-0.39- [====================== ] 39/129 Installing : perl-IO-Socket-IP-0.39- [======================= ] 39/129 Installing : perl-IO-Socket-IP-0.39-4.fc27.noarch 39/129 Installing : perl-libnet-3.11-1.fc27 [ ] 40/129 Installing : perl-libnet-3.11-1.fc27 [= ] 40/129 Installing : perl-libnet-3.11-1.fc27 [=== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [==== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [===== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [====== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [======= ] 40/129 Installing : perl-libnet-3.11-1.fc27 [======== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [========= ] 40/129 Installing : perl-libnet-3.11-1.fc27 [========== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [============= ] 40/129 Installing : perl-libnet-3.11-1.fc27 [============== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [=============== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [================== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [=================== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [===================== ] 40/129 Installing : perl-libnet-3.11-1.fc27 [======================= ] 40/129 Installing : perl-libnet-3.11-1.fc27.noarch 40/129 Installing : perl-Net-Ping-2.55-408. [ ] 41/129 Installing : perl-Net-Ping-2.55-408. [== ] 41/129 Installing : perl-Net-Ping-2.55-408. [=========== ] 41/129 Installing : perl-Net-Ping-2.55-408. [=================== ] 41/129 Installing : perl-Net-Ping-2.55-408. [======================= ] 41/129 Installing : perl-Net-Ping-2.55-408.fc28.1.riscv64.noarch 41/129 Installing : perl-Sub-Install-0.928- [ ] 42/129 Installing : perl-Sub-Install-0.928- [= ] 42/129 Installing : perl-Sub-Install-0.928- [============= ] 42/129 Installing : perl-Sub-Install-0.928- [=============== ] 42/129 Installing : perl-Sub-Install-0.928- [======================= ] 42/129 Installing : perl-Sub-Install-0.928-13.fc27.noarch 42/129 Installing : perl-CPAN-Meta-YAML-0.0 [ ] 43/129 Installing : perl-CPAN-Meta-YAML-0.0 [== ] 43/129 Installing : perl-CPAN-Meta-YAML-0.0 [======================= ] 43/129 Installing : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noa 43/129 Installing : perl-ExtUtils-Command-1 [ ] 44/129 Installing : perl-ExtUtils-Command-1 [===== ] 44/129 Installing : perl-ExtUtils-Command-1 [======================= ] 44/129 Installing : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 44/129 Installing : perl-Locale-Maketext-1. [ ] 45/129 Installing : perl-Locale-Maketext-1. [== ] 45/129 Installing : perl-Locale-Maketext-1. [=== ] 45/129 Installing : perl-Locale-Maketext-1. [==== ] 45/129 Installing : perl-Locale-Maketext-1. [====== ] 45/129 Installing : perl-Locale-Maketext-1. [========== ] 45/129 Installing : perl-Locale-Maketext-1. [=============== ] 45/129 Installing : perl-Locale-Maketext-1. [================== ] 45/129 Installing : perl-Locale-Maketext-1. [======================= ] 45/129 Installing : perl-Locale-Maketext-1.28-408.fc27.0.riscv64.noa 45/129 Installing : perl-Locale-Maketext-Si [ ] 46/129 Installing : perl-Locale-Maketext-Si [====== ] 46/129 Installing : perl-Locale-Maketext-Si [======= ] 46/129 Installing : perl-Locale-Maketext-Si [======================= ] 46/129 Installing : perl-Locale-Maketext-Simple-1:0.21-408.fc28.1.ri 46/129 Installing : perl-Params-Check-1:0.3 [ ] 47/129 Installing : perl-Params-Check-1:0.3 [===== ] 47/129 Installing : perl-Params-Check-1:0.3 [======================= ] 47/129 Installing : perl-Params-Check-1:0.38-408.fc27.0.riscv64.noar 47/129 Installing : perl-Module-Load-Condit [ ] 48/129 Installing : perl-Module-Load-Condit [==== ] 48/129 Installing : perl-Module-Load-Condit [===== ] 48/129 Installing : perl-Module-Load-Condit [======================= ] 48/129 Installing : perl-Module-Load-Conditional-0.68-408.fc27.0.ris 48/129 Installing : perl-Math-Complex-1.59- [ ] 49/129 Installing : perl-Math-Complex-1.59- [== ] 49/129 Installing : perl-Math-Complex-1.59- [==== ] 49/129 Installing : perl-Math-Complex-1.59- [============= ] 49/129 Installing : perl-Math-Complex-1.59- [================== ] 49/129 Installing : perl-Math-Complex-1.59- [======================= ] 49/129 Installing : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 49/129 Installing : perl-Math-BigInt-1:1.99 [ ] 50/129 Installing : perl-Math-BigInt-1:1.99 [= ] 50/129 Installing : perl-Math-BigInt-1:1.99 [== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [=== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [==== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [===== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [====== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [======= ] 50/129 Installing : perl-Math-BigInt-1:1.99 [======== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [========= ] 50/129 Installing : perl-Math-BigInt-1:1.99 [=========== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [============ ] 50/129 Installing : perl-Math-BigInt-1:1.99 [============= ] 50/129 Installing : perl-Math-BigInt-1:1.99 [=============== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [================ ] 50/129 Installing : perl-Math-BigInt-1:1.99 [================= ] 50/129 Installing : perl-Math-BigInt-1:1.99 [================== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [==================== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [===================== ] 50/129 Installing : perl-Math-BigInt-1:1.99 [======================= ] 50/129 Installing : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 50/129 Installing : perl-Math-BigRat-0.2613 [ ] 51/129 Installing : perl-Math-BigRat-0.2613 [=== ] 51/129 Installing : perl-Math-BigRat-0.2613 [==== ] 51/129 Installing : perl-Math-BigRat-0.2613 [===== ] 51/129 Installing : perl-Math-BigRat-0.2613 [====== ] 51/129 Installing : perl-Math-BigRat-0.2613 [============= ] 51/129 Installing : perl-Math-BigRat-0.2613 [==================== ] 51/129 Installing : perl-Math-BigRat-0.2613 [======================= ] 51/129 Installing : perl-Math-BigRat-0.2613-2.fc27.noarch 51/129 Installing : perl-Pod-Escapes-1:1.07 [ ] 52/129 Installing : perl-Pod-Escapes-1:1.07 [==== ] 52/129 Installing : perl-Pod-Escapes-1:1.07 [======================= ] 52/129 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarc 52/129 Installing : perl-Term-Cap-1.17-408. [ ] 53/129 Installing : perl-Term-Cap-1.17-408. [==== ] 53/129 Installing : perl-Term-Cap-1.17-408. [======================= ] 53/129 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 53/129 Installing : perl-Pod-Perldoc-3.28-4 [ ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [= ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [=== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [==== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [===== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [========== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [=============== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [================ ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [================= ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [=================== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [==================== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [===================== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [====================== ] 54/129 Installing : perl-Pod-Perldoc-3.28-4 [======================= ] 54/129 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 54/129 Installing : perl-Pod-Simple-1:3.35- [ ] 55/129 Installing : perl-Pod-Simple-1:3.35- [= ] 55/129 Installing : perl-Pod-Simple-1:3.35- [== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [=== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [==== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [===== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [====== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [======= ] 55/129 Installing : perl-Pod-Simple-1:3.35- [======== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [========== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [=========== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [============ ] 55/129 Installing : perl-Pod-Simple-1:3.35- [============= ] 55/129 Installing : perl-Pod-Simple-1:3.35- [============== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [=============== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [================ ] 55/129 Installing : perl-Pod-Simple-1:3.35- [================= ] 55/129 Installing : perl-Pod-Simple-1:3.35- [================== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [=================== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [==================== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [===================== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [====================== ] 55/129 Installing : perl-Pod-Simple-1:3.35- [======================= ] 55/129 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 55/129 Installing : perl-Getopt-Long-1:2.50 [ ] 56/129 Installing : perl-Getopt-Long-1:2.50 [=== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [==== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [===== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [====== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [========= ] 56/129 Installing : perl-Getopt-Long-1:2.50 [============== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [==================== ] 56/129 Installing : perl-Getopt-Long-1:2.50 [======================= ] 56/129 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 56/129 Installing : perl-Encode-4:2.94-16.f [ ] 57/129 Installing : perl-Encode-4:2.94-16.f [= ] 57/129 Installing : perl-Encode-4:2.94-16.f [== ] 57/129 Installing : perl-Encode-4:2.94-16.f [=== ] 57/129 Installing : perl-Encode-4:2.94-16.f [==== ] 57/129 Installing : perl-Encode-4:2.94-16.f [===== ] 57/129 Installing : perl-Encode-4:2.94-16.f [====== ] 57/129 Installing : perl-Encode-4:2.94-16.f [======= ] 57/129 Installing : perl-Encode-4:2.94-16.f [======== ] 57/129 Installing : perl-Encode-4:2.94-16.f [========= ] 57/129 Installing : perl-Encode-4:2.94-16.f [========== ] 57/129 Installing : perl-Encode-4:2.94-16.f [=========== ] 57/129 Installing : perl-Encode-4:2.94-16.f [============ ] 57/129 Installing : perl-Encode-4:2.94-16.f [============= ] 57/129 Installing : perl-Encode-4:2.94-16.f [============== ] 57/129 Installing : perl-Encode-4:2.94-16.f [=============== ] 57/129 Installing : perl-Encode-4:2.94-16.f [================ ] 57/129 Installing : perl-Encode-4:2.94-16.f [================= ] 57/129 Installing : perl-Encode-4:2.94-16.f [================== ] 57/129 Installing : perl-Encode-4:2.94-16.f [=================== ] 57/129 Installing : perl-Encode-4:2.94-16.f [==================== ] 57/129 Installing : perl-Encode-4:2.94-16.f [===================== ] 57/129 Installing : perl-Encode-4:2.94-16.f [====================== ] 57/129 Installing : perl-Encode-4:2.94-16.f [======================= ] 57/129 Installing : perl-Encode-4:2.94-16.fc27.riscv64 57/129 Installing : perl-Pod-Usage-4:1.69-4 [ ] 58/129 Installing : perl-Pod-Usage-4:1.69-4 [== ] 58/129 Installing : perl-Pod-Usage-4:1.69-4 [=== ] 58/129 Installing : perl-Pod-Usage-4:1.69-4 [======= ] 58/129 Installing : perl-Pod-Usage-4:1.69-4 [======================= ] 58/129 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 58/129 Installing : perl-podlators-4.09-408 [ ] 59/129 Installing : perl-podlators-4.09-408 [= ] 59/129 Installing : perl-podlators-4.09-408 [== ] 59/129 Installing : perl-podlators-4.09-408 [=== ] 59/129 Installing : perl-podlators-4.09-408 [==== ] 59/129 Installing : perl-podlators-4.09-408 [===== ] 59/129 Installing : perl-podlators-4.09-408 [====== ] 59/129 Installing : perl-podlators-4.09-408 [======= ] 59/129 Installing : perl-podlators-4.09-408 [=========== ] 59/129 Installing : perl-podlators-4.09-408 [============== ] 59/129 Installing : perl-podlators-4.09-408 [================ ] 59/129 Installing : perl-podlators-4.09-408 [==================== ] 59/129 Installing : perl-podlators-4.09-408 [===================== ] 59/129 Installing : perl-podlators-4.09-408 [====================== ] 59/129 Installing : perl-podlators-4.09-408 [======================= ] 59/129 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 59/129 Installing : perl-ExtUtils-ParseXS-1 [ ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [=== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [==== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [===== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [====== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [=========== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [=============== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [================ ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [================== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [====================== ] 60/129 Installing : perl-ExtUtils-ParseXS-1 [======================= ] 60/129 Installing : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 60/129 Installing : perl-Test-Harness-1:3.3 [ ] 61/129 Installing : perl-Test-Harness-1:3.3 [= ] 61/129 Installing : perl-Test-Harness-1:3.3 [== ] 61/129 Installing : perl-Test-Harness-1:3.3 [=== ] 61/129 Installing : perl-Test-Harness-1:3.3 [==== ] 61/129 Installing : perl-Test-Harness-1:3.3 [===== ] 61/129 Installing : perl-Test-Harness-1:3.3 [====== ] 61/129 Installing : perl-Test-Harness-1:3.3 [======= ] 61/129 Installing : perl-Test-Harness-1:3.3 [======== ] 61/129 Installing : perl-Test-Harness-1:3.3 [========= ] 61/129 Installing : perl-Test-Harness-1:3.3 [========== ] 61/129 Installing : perl-Test-Harness-1:3.3 [=========== ] 61/129 Installing : perl-Test-Harness-1:3.3 [============ ] 61/129 Installing : perl-Test-Harness-1:3.3 [============= ] 61/129 Installing : perl-Test-Harness-1:3.3 [============== ] 61/129 Installing : perl-Test-Harness-1:3.3 [================ ] 61/129 Installing : perl-Test-Harness-1:3.3 [================= ] 61/129 Installing : perl-Test-Harness-1:3.3 [================== ] 61/129 Installing : perl-Test-Harness-1:3.3 [=================== ] 61/129 Installing : perl-Test-Harness-1:3.3 [==================== ] 61/129 Installing : perl-Test-Harness-1:3.3 [===================== ] 61/129 Installing : perl-Test-Harness-1:3.3 [====================== ] 61/129 Installing : perl-Test-Harness-1:3.3 [======================= ] 61/129 Installing : perl-Test-Harness-1:3.39-4.fc27.noarch 61/129 Installing : perl-ExtUtils-Install-2 [ ] 62/129 Installing : perl-ExtUtils-Install-2 [=== ] 62/129 Installing : perl-ExtUtils-Install-2 [==== ] 62/129 Installing : perl-ExtUtils-Install-2 [===== ] 62/129 Installing : perl-ExtUtils-Install-2 [====== ] 62/129 Installing : perl-ExtUtils-Install-2 [=============== ] 62/129 Installing : perl-ExtUtils-Install-2 [================= ] 62/129 Installing : perl-ExtUtils-Install-2 [===================== ] 62/129 Installing : perl-ExtUtils-Install-2 [======================= ] 62/129 Installing : perl-ExtUtils-Install-2.14-3.fc27.noarch 62/129 Installing : perl-devel-4:5.26.1-408 [ ] 63/129 Installing : perl-devel-4:5.26.1-408 [= ] 63/129 Installing : perl-devel-4:5.26.1-408 [== ] 63/129 Installing : perl-devel-4:5.26.1-408 [=== ] 63/129 Installing : perl-devel-4:5.26.1-408 [==== ] 63/129 Installing : perl-devel-4:5.26.1-408 [===== ] 63/129 Installing : perl-devel-4:5.26.1-408 [====== ] 63/129 Installing : perl-devel-4:5.26.1-408 [======= ] 63/129 Installing : perl-devel-4:5.26.1-408 [======== ] 63/129 Installing : perl-devel-4:5.26.1-408 [========= ] 63/129 Installing : perl-devel-4:5.26.1-408 [========== ] 63/129 Installing : perl-devel-4:5.26.1-408 [=========== ] 63/129 Installing : perl-devel-4:5.26.1-408 [============ ] 63/129 Installing : perl-devel-4:5.26.1-408 [============= ] 63/129 Installing : perl-devel-4:5.26.1-408 [============== ] 63/129 Installing : perl-devel-4:5.26.1-408 [=============== ] 63/129 Installing : perl-devel-4:5.26.1-408 [================ ] 63/129 Installing : perl-devel-4:5.26.1-408 [================= ] 63/129 Installing : perl-devel-4:5.26.1-408 [================== ] 63/129 Installing : perl-devel-4:5.26.1-408 [=================== ] 63/129 Installing : perl-devel-4:5.26.1-408 [==================== ] 63/129 Installing : perl-devel-4:5.26.1-408 [===================== ] 63/129 Installing : perl-devel-4:5.26.1-408 [====================== ] 63/129 Installing : perl-devel-4:5.26.1-408 [======================= ] 63/129 Installing : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 63/129 Installing : perl-ExtUtils-MakeMaker [ ] 64/129 Installing : perl-ExtUtils-MakeMaker [= ] 64/129 Installing : perl-ExtUtils-MakeMaker [== ] 64/129 Installing : perl-ExtUtils-MakeMaker [=== ] 64/129 Installing : perl-ExtUtils-MakeMaker [==== ] 64/129 Installing : perl-ExtUtils-MakeMaker [===== ] 64/129 Installing : perl-ExtUtils-MakeMaker [====== ] 64/129 Installing : perl-ExtUtils-MakeMaker [======= ] 64/129 Installing : perl-ExtUtils-MakeMaker [======== ] 64/129 Installing : perl-ExtUtils-MakeMaker [========= ] 64/129 Installing : perl-ExtUtils-MakeMaker [========== ] 64/129 Installing : perl-ExtUtils-MakeMaker [=========== ] 64/129 Installing : perl-ExtUtils-MakeMaker [============ ] 64/129 Installing : perl-ExtUtils-MakeMaker [============= ] 64/129 Installing : perl-ExtUtils-MakeMaker [============== ] 64/129 Installing : perl-ExtUtils-MakeMaker [=============== ] 64/129 Installing : perl-ExtUtils-MakeMaker [================ ] 64/129 Installing : perl-ExtUtils-MakeMaker [================= ] 64/129 Installing : perl-ExtUtils-MakeMaker [================== ] 64/129 Installing : perl-ExtUtils-MakeMaker [=================== ] 64/129 Installing : perl-ExtUtils-MakeMaker [===================== ] 64/129 Installing : perl-ExtUtils-MakeMaker [====================== ] 64/129 Installing : perl-ExtUtils-MakeMaker [======================= ] 64/129 Installing : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 64/129 Installing : perl-ExtUtils-Embed-1.3 [ ] 65/129 Installing : perl-ExtUtils-Embed-1.3 [===== ] 65/129 Installing : perl-ExtUtils-Embed-1.3 [====== ] 65/129 Installing : perl-ExtUtils-Embed-1.3 [======================= ] 65/129 Installing : perl-ExtUtils-Embed-1.34-408.fc28.1.riscv64.noar 65/129 Installing : perl-JSON-PP-1:2.94-4.f [ ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [=== ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [====== ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [======= ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [============= ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [=================== ] 66/129 Installing : perl-JSON-PP-1:2.94-4.f [======================= ] 66/129 Installing : perl-JSON-PP-1:2.94-4.fc27.noarch 66/129 Installing : perl-encoding-4:2.19-40 [ ] 67/129 Installing : perl-encoding-4:2.19-40 [================= ] 67/129 Installing : perl-encoding-4:2.19-40 [======================= ] 67/129 Installing : perl-encoding-4:2.19-408.fc27.0.riscv64.riscv64 67/129 Installing : perl-Pod-Html-1.22.02-4 [ ] 68/129 Installing : perl-Pod-Html-1.22.02-4 [== ] 68/129 Installing : perl-Pod-Html-1.22.02-4 [=== ] 68/129 Installing : perl-Pod-Html-1.22.02-4 [===== ] 68/129 Installing : perl-Pod-Html-1.22.02-4 [======== ] 68/129 Installing : perl-Pod-Html-1.22.02-4 [======================= ] 68/129 Installing : perl-Pod-Html-1.22.02-408.fc28.1.riscv64.noarch 68/129 Installing : perl-Digest-SHA-1:6.01- [ ] 69/129 Installing : perl-Digest-SHA-1:6.01- [== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [===== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [======== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [=========== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [============== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [================= ] 69/129 Installing : perl-Digest-SHA-1:6.01- [==================== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [====================== ] 69/129 Installing : perl-Digest-SHA-1:6.01- [======================= ] 69/129 Installing : perl-Digest-SHA-1:6.01-1.fc28.riscv64 69/129 Installing : perl-Compress-Raw-Zlib- [ ] 70/129 Installing : perl-Compress-Raw-Zlib- [= ] 70/129 Installing : perl-Compress-Raw-Zlib- [== ] 70/129 Installing : perl-Compress-Raw-Zlib- [===== ] 70/129 Installing : perl-Compress-Raw-Zlib- [======= ] 70/129 Installing : perl-Compress-Raw-Zlib- [========= ] 70/129 Installing : perl-Compress-Raw-Zlib- [=========== ] 70/129 Installing : perl-Compress-Raw-Zlib- [============= ] 70/129 Installing : perl-Compress-Raw-Zlib- [=============== ] 70/129 Installing : perl-Compress-Raw-Zlib- [================= ] 70/129 Installing : perl-Compress-Raw-Zlib- [=================== ] 70/129 Installing : perl-Compress-Raw-Zlib- [===================== ] 70/129 Installing : perl-Compress-Raw-Zlib- [====================== ] 70/129 Installing : perl-Compress-Raw-Zlib- [======================= ] 70/129 Installing : perl-Compress-Raw-Zlib-2.076-1.fc28.riscv64 70/129 Installing : perl-IO-Compress-2.074- [ ] 71/129 Installing : perl-IO-Compress-2.074- [= ] 71/129 Installing : perl-IO-Compress-2.074- [== ] 71/129 Installing : perl-IO-Compress-2.074- [=== ] 71/129 Installing : perl-IO-Compress-2.074- [==== ] 71/129 Installing : perl-IO-Compress-2.074- [===== ] 71/129 Installing : perl-IO-Compress-2.074- [====== ] 71/129 Installing : perl-IO-Compress-2.074- [======= ] 71/129 Installing : perl-IO-Compress-2.074- [======== ] 71/129 Installing : perl-IO-Compress-2.074- [========= ] 71/129 Installing : perl-IO-Compress-2.074- [========== ] 71/129 Installing : perl-IO-Compress-2.074- [=========== ] 71/129 Installing : perl-IO-Compress-2.074- [============ ] 71/129 Installing : perl-IO-Compress-2.074- [============= ] 71/129 Installing : perl-IO-Compress-2.074- [============== ] 71/129 Installing : perl-IO-Compress-2.074- [=============== ] 71/129 Installing : perl-IO-Compress-2.074- [================ ] 71/129 Installing : perl-IO-Compress-2.074- [================= ] 71/129 Installing : perl-IO-Compress-2.074- [================== ] 71/129 Installing : perl-IO-Compress-2.074- [=================== ] 71/129 Installing : perl-IO-Compress-2.074- [==================== ] 71/129 Installing : perl-IO-Compress-2.074- [===================== ] 71/129 Installing : perl-IO-Compress-2.074- [====================== ] 71/129 Installing : perl-IO-Compress-2.074- [======================= ] 71/129 Installing : perl-IO-Compress-2.074-408.fc27.0.riscv64.noarch 71/129 Installing : perl-IO-Zlib-1:1.10-408 [ ] 72/129 Installing : perl-IO-Zlib-1:1.10-408 [===== ] 72/129 Installing : perl-IO-Zlib-1:1.10-408 [======================= ] 72/129 Installing : perl-IO-Zlib-1:1.10-408.fc28.1.riscv64.noarch 72/129 Installing : perl-Params-Util-1.07-2 [ ] 73/129 Installing : perl-Params-Util-1.07-2 [=== ] 73/129 Installing : perl-Params-Util-1.07-2 [========= ] 73/129 Installing : perl-Params-Util-1.07-2 [============== ] 73/129 Installing : perl-Params-Util-1.07-2 [================== ] 73/129 Installing : perl-Params-Util-1.07-2 [=================== ] 73/129 Installing : perl-Params-Util-1.07-2 [====================== ] 73/129 Installing : perl-Params-Util-1.07-2 [======================= ] 73/129 Installing : perl-Params-Util-1.07-20.fc28.riscv64 73/129 Installing : perl-CPAN-Meta-Requirem [ ] 74/129 Installing : perl-CPAN-Meta-Requirem [=== ] 74/129 Installing : perl-CPAN-Meta-Requirem [======================= ] 74/129 Installing : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.ris 74/129 Installing : perl-CPAN-Meta-2.150010 [ ] 75/129 Installing : perl-CPAN-Meta-2.150010 [= ] 75/129 Installing : perl-CPAN-Meta-2.150010 [== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [=== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [==== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [===== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [====== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [========= ] 75/129 Installing : perl-CPAN-Meta-2.150010 [============ ] 75/129 Installing : perl-CPAN-Meta-2.150010 [============= ] 75/129 Installing : perl-CPAN-Meta-2.150010 [============== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [=============== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [================ ] 75/129 Installing : perl-CPAN-Meta-2.150010 [=================== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [====================== ] 75/129 Installing : perl-CPAN-Meta-2.150010 [======================= ] 75/129 Installing : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarc 75/129 Installing : perl-Data-OptList-0.110 [ ] 76/129 Installing : perl-Data-OptList-0.110 [= ] 76/129 Installing : perl-Data-OptList-0.110 [==== ] 76/129 Installing : perl-Data-OptList-0.110 [===== ] 76/129 Installing : perl-Data-OptList-0.110 [======== ] 76/129 Installing : perl-Data-OptList-0.110 [================ ] 76/129 Installing : perl-Data-OptList-0.110 [================== ] 76/129 Installing : perl-Data-OptList-0.110 [======================= ] 76/129 Installing : perl-Data-OptList-0.110-5.fc27.noarch 76/129 Installing : perl-open-1.11-408.fc28 [ ] 77/129 Installing : perl-open-1.11-408.fc28 [======= ] 77/129 Installing : perl-open-1.11-408.fc28 [======================= ] 77/129 Installing : perl-open-1.11-408.fc28.1.riscv64.noarch 77/129 Installing : perl-ExtUtils-Miniperl- [ ] 78/129 Installing : perl-ExtUtils-Miniperl- [===== ] 78/129 Installing : perl-ExtUtils-Miniperl- [======================= ] 78/129 Installing : perl-ExtUtils-Miniperl-1.06-408.fc28.1.riscv64.n 78/129 Installing : perl-libnetcfg-4:5.26.1 [ ] 79/129 Installing : perl-libnetcfg-4:5.26.1 [==================== ] 79/129 Installing : perl-libnetcfg-4:5.26.1 [======================= ] 79/129 Installing : perl-libnetcfg-4:5.26.1-408.fc28.1.riscv64.noarc 79/129 Installing : perl-inc-latest-2:0.500 [ ] 80/129 Installing : perl-inc-latest-2:0.500 [==== ] 80/129 Installing : perl-inc-latest-2:0.500 [=========== ] 80/129 Installing : perl-inc-latest-2:0.500 [============== ] 80/129 Installing : perl-inc-latest-2:0.500 [=============== ] 80/129 Installing : perl-inc-latest-2:0.500 [===================== ] 80/129 Installing : perl-inc-latest-2:0.500 [======================= ] 80/129 Installing : perl-inc-latest-2:0.500-8.fc27.noarch 80/129 Installing : perl-Module-CoreList-to [ ] 81/129 Installing : perl-Module-CoreList-to [================== ] 81/129 Installing : perl-Module-CoreList-to [=================== ] 81/129 Installing : perl-Module-CoreList-to [======================= ] 81/129 Installing : perl-Module-CoreList-tools-1:5.20180120-1.fc27.n 81/129 Installing : perl-Pod-Checker-4:1.73 [ ] 82/129 Installing : perl-Pod-Checker-4:1.73 [= ] 82/129 Installing : perl-Pod-Checker-4:1.73 [=== ] 82/129 Installing : perl-Pod-Checker-4:1.73 [====== ] 82/129 Installing : perl-Pod-Checker-4:1.73 [======= ] 82/129 Installing : perl-Pod-Checker-4:1.73 [======================= ] 82/129 Installing : perl-Pod-Checker-4:1.73-408.fc27.0.riscv64.noarc 82/129 Installing : perl-Pod-Parser-1.63-40 [ ] 83/129 Installing : perl-Pod-Parser-1.63-40 [= ] 83/129 Installing : perl-Pod-Parser-1.63-40 [=== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [==== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [====== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [========= ] 83/129 Installing : perl-Pod-Parser-1.63-40 [=========== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [============== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [================== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [===================== ] 83/129 Installing : perl-Pod-Parser-1.63-40 [======================= ] 83/129 Installing : perl-Pod-Parser-1.63-408.fc27.0.riscv64.noarch 83/129 Installing : perl-bignum-0.47-408.fc [ ] 84/129 Installing : perl-bignum-0.47-408.fc [= ] 84/129 Installing : perl-bignum-0.47-408.fc [==== ] 84/129 Installing : perl-bignum-0.47-408.fc [===== ] 84/129 Installing : perl-bignum-0.47-408.fc [====== ] 84/129 Installing : perl-bignum-0.47-408.fc [============= ] 84/129 Installing : perl-bignum-0.47-408.fc [=================== ] 84/129 Installing : perl-bignum-0.47-408.fc [======================= ] 84/129 Installing : perl-bignum-0.47-408.fc27.0.riscv64.noarch 84/129 Installing : perl-Math-BigInt-FastCa [ ] 85/129 Installing : perl-Math-BigInt-FastCa [= ] 85/129 Installing : perl-Math-BigInt-FastCa [======== ] 85/129 Installing : perl-Math-BigInt-FastCa [=============== ] 85/129 Installing : perl-Math-BigInt-FastCa [=================== ] 85/129 Installing : perl-Math-BigInt-FastCa [====================== ] 85/129 Installing : perl-Math-BigInt-FastCa [======================= ] 85/129 Installing : perl-Math-BigInt-FastCalc-0.500.600-5.fc28.riscv 85/129 Installing : perl-Filter-Simple-0.94 [ ] 86/129 Installing : perl-Filter-Simple-0.94 [= ] 86/129 Installing : perl-Filter-Simple-0.94 [========= ] 86/129 Installing : perl-Filter-Simple-0.94 [============ ] 86/129 Installing : perl-Filter-Simple-0.94 [======================= ] 86/129 Installing : perl-Filter-Simple-0.94-1.fc27.noarch 86/129 Installing : perl-Devel-SelfStubber- [ ] 87/129 Installing : perl-Devel-SelfStubber- [======== ] 87/129 Installing : perl-Devel-SelfStubber- [========= ] 87/129 Installing : perl-Devel-SelfStubber- [======================= ] 87/129 Installing : perl-Devel-SelfStubber-1.06-408.fc28.1.riscv64.n 87/129 Installing : perl-Time-Piece-1.31-40 [ ] 88/129 Installing : perl-Time-Piece-1.31-40 [==== ] 88/129 Installing : perl-Time-Piece-1.31-40 [===== ] 88/129 Installing : perl-Time-Piece-1.31-40 [=========== ] 88/129 Installing : perl-Time-Piece-1.31-40 [================= ] 88/129 Installing : perl-Time-Piece-1.31-40 [====================== ] 88/129 Installing : perl-Time-Piece-1.31-40 [======================= ] 88/129 Installing : perl-Time-Piece-1.31-408.fc28.1.riscv64.riscv64 88/129 Installing : perl-Memoize-1.03-408.f [ ] 89/129 Installing : perl-Memoize-1.03-408.f [=== ] 89/129 Installing : perl-Memoize-1.03-408.f [===== ] 89/129 Installing : perl-Memoize-1.03-408.f [====== ] 89/129 Installing : perl-Memoize-1.03-408.f [======= ] 89/129 Installing : perl-Memoize-1.03-408.f [======== ] 89/129 Installing : perl-Memoize-1.03-408.f [================= ] 89/129 Installing : perl-Memoize-1.03-408.f [================== ] 89/129 Installing : perl-Memoize-1.03-408.f [===================== ] 89/129 Installing : perl-Memoize-1.03-408.f [====================== ] 89/129 Installing : perl-Memoize-1.03-408.f [======================= ] 89/129 Installing : perl-Memoize-1.03-408.fc28.1.riscv64.noarch 89/129 Installing : perl-Test-Simple-1:1.30 [ ] 90/129 Installing : perl-Test-Simple-1:1.30 [= ] 90/129 Installing : perl-Test-Simple-1:1.30 [== ] 90/129 Installing : perl-Test-Simple-1:1.30 [=== ] 90/129 Installing : perl-Test-Simple-1:1.30 [==== ] 90/129 Installing : perl-Test-Simple-1:1.30 [===== ] 90/129 Installing : perl-Test-Simple-1:1.30 [====== ] 90/129 Installing : perl-Test-Simple-1:1.30 [======= ] 90/129 Installing : perl-Test-Simple-1:1.30 [======== ] 90/129 Installing : perl-Test-Simple-1:1.30 [========= ] 90/129 Installing : perl-Test-Simple-1:1.30 [========== ] 90/129 Installing : perl-Test-Simple-1:1.30 [=========== ] 90/129 Installing : perl-Test-Simple-1:1.30 [============ ] 90/129 Installing : perl-Test-Simple-1:1.30 [============= ] 90/129 Installing : perl-Test-Simple-1:1.30 [============== ] 90/129 Installing : perl-Test-Simple-1:1.30 [=============== ] 90/129 Installing : perl-Test-Simple-1:1.30 [================ ] 90/129 Installing : perl-Test-Simple-1:1.30 [================= ] 90/129 Installing : perl-Test-Simple-1:1.30 [================== ] 90/129 Installing : perl-Test-Simple-1:1.30 [=================== ] 90/129 Installing : perl-Test-Simple-1:1.30 [==================== ] 90/129 Installing : perl-Test-Simple-1:1.30 [===================== ] 90/129 Installing : perl-Test-Simple-1:1.30 [====================== ] 90/129 Installing : perl-Test-Simple-1:1.30 [======================= ] 90/129 Installing : perl-Test-Simple-1:1.302103-1.fc27.noarch 90/129 Installing : perl-PerlIO-via-QuotedP [ ] 91/129 Installing : perl-PerlIO-via-QuotedP [========== ] 91/129 Installing : perl-PerlIO-via-QuotedP [=========== ] 91/129 Installing : perl-PerlIO-via-QuotedP [======================= ] 91/129 Installing : perl-PerlIO-via-QuotedPrint-0.08-408.fc27.0.risc 91/129 Installing : perl-experimental-0.019 [ ] 92/129 Installing : perl-experimental-0.019 [= ] 92/129 Installing : perl-experimental-0.019 [== ] 92/129 Installing : perl-experimental-0.019 [================ ] 92/129 Installing : perl-experimental-0.019 [================== ] 92/129 Installing : perl-experimental-0.019 [======================= ] 92/129 Installing : perl-experimental-0.019-1.fc27.noarch 92/129 Installing : perl-Test-1.30-408.fc28 [ ] 93/129 Installing : perl-Test-1.30-408.fc28 [===== ] 93/129 Installing : perl-Test-1.30-408.fc28 [======================= ] 93/129 Installing : perl-Test-1.30-408.fc28.1.riscv64.noarch 93/129 Installing : perl-Sys-Syslog-0.35-40 [ ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [===== ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [======= ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [============= ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [================== ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [====================== ] 94/129 Installing : perl-Sys-Syslog-0.35-40 [======================= ] 94/129 Installing : perl-Sys-Syslog-0.35-408.fc27.0.riscv64.riscv64 94/129 Installing : perl-utils-5.26.1-408.f [ ] 95/129 Installing : perl-utils-5.26.1-408.f [===== ] 95/129 Installing : perl-utils-5.26.1-408.f [====== ] 95/129 Installing : perl-utils-5.26.1-408.f [========= ] 95/129 Installing : perl-utils-5.26.1-408.f [========== ] 95/129 Installing : perl-utils-5.26.1-408.f [=========== ] 95/129 Installing : perl-utils-5.26.1-408.f [============ ] 95/129 Installing : perl-utils-5.26.1-408.f [============== ] 95/129 Installing : perl-utils-5.26.1-408.f [==================== ] 95/129 Installing : perl-utils-5.26.1-408.f [====================== ] 95/129 Installing : perl-utils-5.26.1-408.f [======================= ] 95/129 Installing : perl-utils-5.26.1-408.fc28.1.riscv64.noarch 95/129 Installing : perl-Algorithm-Diff-1.1 [ ] 96/129 Installing : perl-Algorithm-Diff-1.1 [=== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [==== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [======= ] 96/129 Installing : perl-Algorithm-Diff-1.1 [======== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [========== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [=========== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [================== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [====================== ] 96/129 Installing : perl-Algorithm-Diff-1.1 [======================= ] 96/129 Installing : perl-Algorithm-Diff-1.1903-8.fc27.noarch 96/129 Installing : perl-Text-Diff-1.44-5.f [ ] 97/129 Installing : perl-Text-Diff-1.44-5.f [==== ] 97/129 Installing : perl-Text-Diff-1.44-5.f [========= ] 97/129 Installing : perl-Text-Diff-1.44-5.f [=========== ] 97/129 Installing : perl-Text-Diff-1.44-5.f [============ ] 97/129 Installing : perl-Text-Diff-1.44-5.f [================== ] 97/129 Installing : perl-Text-Diff-1.44-5.f [==================== ] 97/129 Installing : perl-Text-Diff-1.44-5.f [======================= ] 97/129 Installing : perl-Text-Diff-1.44-5.fc27.noarch 97/129 Installing : perl-Archive-Tar-2.26-4 [ ] 98/129 Installing : perl-Archive-Tar-2.26-4 [= ] 98/129 Installing : perl-Archive-Tar-2.26-4 [===== ] 98/129 Installing : perl-Archive-Tar-2.26-4 [====== ] 98/129 Installing : perl-Archive-Tar-2.26-4 [======== ] 98/129 Installing : perl-Archive-Tar-2.26-4 [============= ] 98/129 Installing : perl-Archive-Tar-2.26-4 [================== ] 98/129 Installing : perl-Archive-Tar-2.26-4 [==================== ] 98/129 Installing : perl-Archive-Tar-2.26-4 [======================= ] 98/129 Installing : perl-Archive-Tar-2.26-4.fc27.noarch 98/129 Installing : perl-Attribute-Handlers [ ] 99/129 Installing : perl-Attribute-Handlers [===== ] 99/129 Installing : perl-Attribute-Handlers [======================= ] 99/129 Installing : perl-Attribute-Handlers-0.99-408.fc28.1.riscv64. 99/129 Installing : perl-B-Debug-1.26-1.fc2 [ ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [==== ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [===== ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [========= ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [================ ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [================= ] 100/129 Installing : perl-B-Debug-1.26-1.fc2 [======================= ] 100/129 Installing : perl-B-Debug-1.26-1.fc27.noarch 100/129 Installing : perl-Text-Template-1.47 [ ] 101/129 Installing : perl-Text-Template-1.47 [= ] 101/129 Installing : perl-Text-Template-1.47 [==== ] 101/129 Installing : perl-Text-Template-1.47 [====== ] 101/129 Installing : perl-Text-Template-1.47 [========== ] 101/129 Installing : perl-Text-Template-1.47 [=========== ] 101/129 Installing : perl-Text-Template-1.47 [================= ] 101/129 Installing : perl-Text-Template-1.47 [======================= ] 101/129 Installing : perl-Text-Template-1.47-3.fc27.noarch 101/129 Installing : perl-Package-Generator- [ ] 102/129 Installing : perl-Package-Generator- [============== ] 102/129 Installing : perl-Package-Generator- [================ ] 102/129 Installing : perl-Package-Generator- [================== ] 102/129 Installing : perl-Package-Generator- [===================== ] 102/129 Installing : perl-Package-Generator- [======================= ] 102/129 Installing : perl-Package-Generator-1.106-10.fc27.noarch 102/129 Installing : perl-Sub-Exporter-0.987 [ ] 103/129 Installing : perl-Sub-Exporter-0.987 [= ] 103/129 Installing : perl-Sub-Exporter-0.987 [== ] 103/129 Installing : perl-Sub-Exporter-0.987 [=== ] 103/129 Installing : perl-Sub-Exporter-0.987 [==== ] 103/129 Installing : perl-Sub-Exporter-0.987 [===== ] 103/129 Installing : perl-Sub-Exporter-0.987 [====== ] 103/129 Installing : perl-Sub-Exporter-0.987 [======= ] 103/129 Installing : perl-Sub-Exporter-0.987 [======== ] 103/129 Installing : perl-Sub-Exporter-0.987 [========= ] 103/129 Installing : perl-Sub-Exporter-0.987 [========== ] 103/129 Installing : perl-Sub-Exporter-0.987 [=========== ] 103/129 Installing : perl-Sub-Exporter-0.987 [============ ] 103/129 Installing : perl-Sub-Exporter-0.987 [============= ] 103/129 Installing : perl-Sub-Exporter-0.987 [================== ] 103/129 Installing : perl-Sub-Exporter-0.987 [=================== ] 103/129 Installing : perl-Sub-Exporter-0.987 [==================== ] 103/129 Installing : perl-Sub-Exporter-0.987 [====================== ] 103/129 Installing : perl-Sub-Exporter-0.987 [======================= ] 103/129 Installing : perl-Sub-Exporter-0.987-13.fc27.noarch 103/129 Installing : perl-Config-Perl-V-0.28 [ ] 104/129 Installing : perl-Config-Perl-V-0.28 [===== ] 104/129 Installing : perl-Config-Perl-V-0.28 [======================= ] 104/129 Installing : perl-Config-Perl-V-0.28-408.fc27.0.riscv64.noarc 104/129 Installing : perl-Env-1.04-408.fc27. [ ] 105/129 Installing : perl-Env-1.04-408.fc27. [======= ] 105/129 Installing : perl-Env-1.04-408.fc27. [======================= ] 105/129 Installing : perl-Env-1.04-408.fc27.0.riscv64.noarch 105/129 Installing : perl-Locale-Codes-3.55- [ ] 106/129 Installing : perl-Locale-Codes-3.55- [= ] 106/129 Installing : perl-Locale-Codes-3.55- [== ] 106/129 Installing : perl-Locale-Codes-3.55- [=== ] 106/129 Installing : perl-Locale-Codes-3.55- [==== ] 106/129 Installing : perl-Locale-Codes-3.55- [===== ] 106/129 Installing : perl-Locale-Codes-3.55- [====== ] 106/129 Installing : perl-Locale-Codes-3.55- [======= ] 106/129 Installing : perl-Locale-Codes-3.55- [======== ] 106/129 Installing : perl-Locale-Codes-3.55- [========= ] 106/129 Installing : perl-Locale-Codes-3.55- [========== ] 106/129 Installing : perl-Locale-Codes-3.55- [=========== ] 106/129 Installing : perl-Locale-Codes-3.55- [============ ] 106/129 Installing : perl-Locale-Codes-3.55- [============= ] 106/129 Installing : perl-Locale-Codes-3.55- [============== ] 106/129 Installing : perl-Locale-Codes-3.55- [=============== ] 106/129 Installing : perl-Locale-Codes-3.55- [================ ] 106/129 Installing : perl-Locale-Codes-3.55- [================= ] 106/129 Installing : perl-Locale-Codes-3.55- [================== ] 106/129 Installing : perl-Locale-Codes-3.55- [=================== ] 106/129 Installing : perl-Locale-Codes-3.55- [==================== ] 106/129 Installing : perl-Locale-Codes-3.55- [===================== ] 106/129 Installing : perl-Locale-Codes-3.55- [====================== ] 106/129 Installing : perl-Locale-Codes-3.55- [======================= ] 106/129 Installing : perl-Locale-Codes-3.55-1.fc27.noarch 106/129 Installing : perl-Module-Loaded-1:0. [ ] 107/129 Installing : perl-Module-Loaded-1:0. [========== ] 107/129 Installing : perl-Module-Loaded-1:0. [======================= ] 107/129 Installing : perl-Module-Loaded-1:0.08-408.fc28.1.riscv64.noa 107/129 Installing : perl-autodie-2.29-408.f [ ] 108/129 Installing : perl-autodie-2.29-408.f [= ] 108/129 Installing : perl-autodie-2.29-408.f [== ] 108/129 Installing : perl-autodie-2.29-408.f [=== ] 108/129 Installing : perl-autodie-2.29-408.f [==== ] 108/129 Installing : perl-autodie-2.29-408.f [===== ] 108/129 Installing : perl-autodie-2.29-408.f [========= ] 108/129 Installing : perl-autodie-2.29-408.f [============= ] 108/129 Installing : perl-autodie-2.29-408.f [=============== ] 108/129 Installing : perl-autodie-2.29-408.f [================ ] 108/129 Installing : perl-autodie-2.29-408.f [================= ] 108/129 Installing : perl-autodie-2.29-408.f [==================== ] 108/129 Installing : perl-autodie-2.29-408.f [===================== ] 108/129 Installing : perl-autodie-2.29-408.f [======================= ] 108/129 Installing : perl-autodie-2.29-408.fc27.0.riscv64.noarch 108/129 Installing : perl-DB_File-1.840-408. [ ] 109/129 Installing : perl-DB_File-1.840-408. [== ] 109/129 Installing : perl-DB_File-1.840-408. [==== ] 109/129 Installing : perl-DB_File-1.840-408. [====== ] 109/129 Installing : perl-DB_File-1.840-408. [======== ] 109/129 Installing : perl-DB_File-1.840-408. [========== ] 109/129 Installing : perl-DB_File-1.840-408. [============= ] 109/129 Installing : perl-DB_File-1.840-408. [=============== ] 109/129 Installing : perl-DB_File-1.840-408. [================= ] 109/129 Installing : perl-DB_File-1.840-408. [=================== ] 109/129 Installing : perl-DB_File-1.840-408. [===================== ] 109/129 Installing : perl-DB_File-1.840-408. [====================== ] 109/129 Installing : perl-DB_File-1.840-408. [======================= ] 109/129 Installing : perl-DB_File-1.840-408.fc27.0.riscv64.riscv64 109/129 Installing : perl-Devel-PPPort-3.36- [ ] 110/129 Installing : perl-Devel-PPPort-3.36- [= ] 110/129 Installing : perl-Devel-PPPort-3.36- [== ] 110/129 Installing : perl-Devel-PPPort-3.36- [=== ] 110/129 Installing : perl-Devel-PPPort-3.36- [==== ] 110/129 Installing : perl-Devel-PPPort-3.36- [===== ] 110/129 Installing : perl-Devel-PPPort-3.36- [====== ] 110/129 Installing : perl-Devel-PPPort-3.36- [======= ] 110/129 Installing : perl-Devel-PPPort-3.36- [======== ] 110/129 Installing : perl-Devel-PPPort-3.36- [========= ] 110/129 Installing : perl-Devel-PPPort-3.36- [========== ] 110/129 Installing : perl-Devel-PPPort-3.36- [=========== ] 110/129 Installing : perl-Devel-PPPort-3.36- [============ ] 110/129 Installing : perl-Devel-PPPort-3.36- [============= ] 110/129 Installing : perl-Devel-PPPort-3.36- [============== ] 110/129 Installing : perl-Devel-PPPort-3.36- [=============== ] 110/129 Installing : perl-Devel-PPPort-3.36- [================ ] 110/129 Installing : perl-Devel-PPPort-3.36- [================= ] 110/129 Installing : perl-Devel-PPPort-3.36- [================== ] 110/129 Installing : perl-Devel-PPPort-3.36- [=================== ] 110/129 Installing : perl-Devel-PPPort-3.36- [==================== ] 110/129 Installing : perl-Devel-PPPort-3.36- [===================== ] 110/129 Installing : perl-Devel-PPPort-3.36- [====================== ] 110/129 Installing : perl-Devel-PPPort-3.36- [======================= ] 110/129 Installing : perl-Devel-PPPort-3.36-4.fc28.riscv64 110/129 Installing : perl-IPC-SysV-2.07-408. [ ] 111/129 Installing : perl-IPC-SysV-2.07-408. [= ] 111/129 Installing : perl-IPC-SysV-2.07-408. [== ] 111/129 Installing : perl-IPC-SysV-2.07-408. [=== ] 111/129 Installing : perl-IPC-SysV-2.07-408. [======== ] 111/129 Installing : perl-IPC-SysV-2.07-408. [============ ] 111/129 Installing : perl-IPC-SysV-2.07-408. [================= ] 111/129 Installing : perl-IPC-SysV-2.07-408. [===================== ] 111/129 Installing : perl-IPC-SysV-2.07-408. [====================== ] 111/129 Installing : perl-IPC-SysV-2.07-408. [======================= ] 111/129 Installing : perl-IPC-SysV-2.07-408.fc27.0.riscv64.riscv64 111/129 Installing : perl-Unicode-Collate-1. [ ] 112/129 Installing : perl-Unicode-Collate-1. [= ] 112/129 Installing : perl-Unicode-Collate-1. [== ] 112/129 Installing : perl-Unicode-Collate-1. [=== ] 112/129 Installing : perl-Unicode-Collate-1. [==== ] 112/129 Installing : perl-Unicode-Collate-1. [===== ] 112/129 Installing : perl-Unicode-Collate-1. [====== ] 112/129 Installing : perl-Unicode-Collate-1. [======= ] 112/129 Installing : perl-Unicode-Collate-1. [======== ] 112/129 Installing : perl-Unicode-Collate-1. [========= ] 112/129 Installing : perl-Unicode-Collate-1. [========== ] 112/129 Installing : perl-Unicode-Collate-1. [=========== ] 112/129 Installing : perl-Unicode-Collate-1. [============ ] 112/129 Installing : perl-Unicode-Collate-1. [============= ] 112/129 Installing : perl-Unicode-Collate-1. [============== ] 112/129 Installing : perl-Unicode-Collate-1. [=============== ] 112/129 Installing : perl-Unicode-Collate-1. [================ ] 112/129 Installing : perl-Unicode-Collate-1. [================= ] 112/129 Installing : perl-Unicode-Collate-1. [================== ] 112/129 Installing : perl-Unicode-Collate-1. [=================== ] 112/129 Installing : perl-Unicode-Collate-1. [==================== ] 112/129 Installing : perl-Unicode-Collate-1. [===================== ] 112/129 Installing : perl-Unicode-Collate-1. [====================== ] 112/129 Installing : perl-Unicode-Collate-1. [======================= ] 112/129 Installing : perl-Unicode-Collate-1.25-1.fc28.riscv64 112/129 Installing : perl-ExtUtils-MM-Utils- [ ] 113/129 Installing : perl-ExtUtils-MM-Utils- [========== ] 113/129 Installing : perl-ExtUtils-MM-Utils- [=========== ] 113/129 Installing : perl-ExtUtils-MM-Utils- [============ ] 113/129 Installing : perl-ExtUtils-MM-Utils- [======================= ] 113/129 Installing : perl-ExtUtils-MM-Utils-1:7.30-2.fc27.noarch 113/129 Installing : perl-IPC-Cmd-2:0.98-4.f [ ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.f [== ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.f [=== ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.f [===== ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.f [============== ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.f [======================= ] 114/129 Installing : perl-IPC-Cmd-2:0.98-4.fc27.noarch 114/129 Installing : perl-ExtUtils-CBuilder- [ ] 115/129 Installing : perl-ExtUtils-CBuilder- [=== ] 115/129 Installing : perl-ExtUtils-CBuilder- [==== ] 115/129 Installing : perl-ExtUtils-CBuilder- [======== ] 115/129 Installing : perl-ExtUtils-CBuilder- [========= ] 115/129 Installing : perl-ExtUtils-CBuilder- [=========== ] 115/129 Installing : perl-ExtUtils-CBuilder- [============== ] 115/129 Installing : perl-ExtUtils-CBuilder- [================= ] 115/129 Installing : perl-ExtUtils-CBuilder- [=================== ] 115/129 Installing : perl-ExtUtils-CBuilder- [==================== ] 115/129 Installing : perl-ExtUtils-CBuilder- [===================== ] 115/129 Installing : perl-ExtUtils-CBuilder- [====================== ] 115/129 Installing : perl-ExtUtils-CBuilder- [======================= ] 115/129 Installing : perl-ExtUtils-CBuilder-1:0.280230-1.fc27.noarch 115/129 Installing : perl-File-Fetch-0.56-1. [ ] 116/129 Installing : perl-File-Fetch-0.56-1. [== ] 116/129 Installing : perl-File-Fetch-0.56-1. [===== ] 116/129 Installing : perl-File-Fetch-0.56-1. [================== ] 116/129 Installing : perl-File-Fetch-0.56-1. [======================= ] 116/129 Installing : perl-File-Fetch-0.56-1.fc27.noarch 116/129 Installing : perl-Thread-Queue-3.12- [ ] 117/129 Installing : perl-Thread-Queue-3.12- [===== ] 117/129 Installing : perl-Thread-Queue-3.12- [======================= ] 117/129 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 117/129 Installing : perl-MRO-Compat-0.13-3. [ ] 118/129 Installing : perl-MRO-Compat-0.13-3. [= ] 118/129 Installing : perl-MRO-Compat-0.13-3. [====== ] 118/129 Installing : perl-MRO-Compat-0.13-3. [======== ] 118/129 Installing : perl-MRO-Compat-0.13-3. [========== ] 118/129 Installing : perl-MRO-Compat-0.13-3. [============= ] 118/129 Installing : perl-MRO-Compat-0.13-3. [============== ] 118/129 Installing : perl-MRO-Compat-0.13-3. [======================= ] 118/129 Installing : perl-MRO-Compat-0.13-3.fc27.noarch 118/129 Installing : perl-Data-Section-0.200 [ ] 119/129 Installing : perl-Data-Section-0.200 [= ] 119/129 Installing : perl-Data-Section-0.200 [============ ] 119/129 Installing : perl-Data-Section-0.200 [============== ] 119/129 Installing : perl-Data-Section-0.200 [======================= ] 119/129 Installing : perl-Data-Section-0.200007-2.fc27.noarch 119/129 Installing : perl-Software-License-0 [ ] 120/129 Installing : perl-Software-License-0 [= ] 120/129 Installing : perl-Software-License-0 [== ] 120/129 Installing : perl-Software-License-0 [=== ] 120/129 Installing : perl-Software-License-0 [==== ] 120/129 Installing : perl-Software-License-0 [====== ] 120/129 Installing : perl-Software-License-0 [======= ] 120/129 Installing : perl-Software-License-0 [======== ] 120/129 Installing : perl-Software-License-0 [========= ] 120/129 Installing : perl-Software-License-0 [========== ] 120/129 Installing : perl-Software-License-0 [============ ] 120/129 Installing : perl-Software-License-0 [============= ] 120/129 Installing : perl-Software-License-0 [=============== ] 120/129 Installing : perl-Software-License-0 [================= ] 120/129 Installing : perl-Software-License-0 [================== ] 120/129 Installing : perl-Software-License-0 [==================== ] 120/129 Installing : perl-Software-License-0 [===================== ] 120/129 Installing : perl-Software-License-0 [====================== ] 120/129 Installing : perl-Software-License-0 [======================= ] 120/129 Installing : perl-Software-License-0.103012-7.fc27.noarch 120/129 Installing : perl-Module-Build-2:0.4 [ ] 121/129 Installing : perl-Module-Build-2:0.4 [= ] 121/129 Installing : perl-Module-Build-2:0.4 [== ] 121/129 Installing : perl-Module-Build-2:0.4 [=== ] 121/129 Installing : perl-Module-Build-2:0.4 [==== ] 121/129 Installing : perl-Module-Build-2:0.4 [===== ] 121/129 Installing : perl-Module-Build-2:0.4 [====== ] 121/129 Installing : perl-Module-Build-2:0.4 [======= ] 121/129 Installing : perl-Module-Build-2:0.4 [======== ] 121/129 Installing : perl-Module-Build-2:0.4 [========= ] 121/129 Installing : perl-Module-Build-2:0.4 [========== ] 121/129 Installing : perl-Module-Build-2:0.4 [=========== ] 121/129 Installing : perl-Module-Build-2:0.4 [============ ] 121/129 Installing : perl-Module-Build-2:0.4 [============== ] 121/129 Installing : perl-Module-Build-2:0.4 [=============== ] 121/129 Installing : perl-Module-Build-2:0.4 [================ ] 121/129 Installing : perl-Module-Build-2:0.4 [================== ] 121/129 Installing : perl-Module-Build-2:0.4 [=================== ] 121/129 Installing : perl-Module-Build-2:0.4 [==================== ] 121/129 Installing : perl-Module-Build-2:0.4 [===================== ] 121/129 Installing : perl-Module-Build-2:0.4 [====================== ] 121/129 Installing : perl-Module-Build-2:0.4 [======================= ] 121/129 Installing : perl-Module-Build-2:0.42.24-4.fc27.noarch 121/129 Installing : perl-perlfaq-5.021011-4 [ ] 122/129 Installing : perl-perlfaq-5.021011-4 [= ] 122/129 Installing : perl-perlfaq-5.021011-4 [== ] 122/129 Installing : perl-perlfaq-5.021011-4 [=== ] 122/129 Installing : perl-perlfaq-5.021011-4 [==== ] 122/129 Installing : perl-perlfaq-5.021011-4 [===== ] 122/129 Installing : perl-perlfaq-5.021011-4 [====== ] 122/129 Installing : perl-perlfaq-5.021011-4 [======= ] 122/129 Installing : perl-perlfaq-5.021011-4 [======== ] 122/129 Installing : perl-perlfaq-5.021011-4 [========= ] 122/129 Installing : perl-perlfaq-5.021011-4 [=========== ] 122/129 Installing : perl-perlfaq-5.021011-4 [============ ] 122/129 Installing : perl-perlfaq-5.021011-4 [============= ] 122/129 Installing : perl-perlfaq-5.021011-4 [============== ] 122/129 Installing : perl-perlfaq-5.021011-4 [=============== ] 122/129 Installing : perl-perlfaq-5.021011-4 [================= ] 122/129 Installing : perl-perlfaq-5.021011-4 [================== ] 122/129 Installing : perl-perlfaq-5.021011-4 [=================== ] 122/129 Installing : perl-perlfaq-5.021011-4 [==================== ] 122/129 Installing : perl-perlfaq-5.021011-4 [===================== ] 122/129 Installing : perl-perlfaq-5.021011-4 [====================== ] 122/129 Installing : perl-perlfaq-5.021011-4 [======================= ] 122/129 Installing : perl-perlfaq-5.021011-408.fc27.0.riscv64.noarch 122/129 Installing : perl-Devel-Peek-1.26-40 [ ] 123/129 Installing : perl-Devel-Peek-1.26-40 [=== ] 123/129 Installing : perl-Devel-Peek-1.26-40 [========= ] 123/129 Installing : perl-Devel-Peek-1.26-40 [=============== ] 123/129 Installing : perl-Devel-Peek-1.26-40 [===================== ] 123/129 Installing : perl-Devel-Peek-1.26-40 [====================== ] 123/129 Installing : perl-Devel-Peek-1.26-40 [======================= ] 123/129 Installing : perl-Devel-Peek-1.26-408.fc28.1.riscv64.riscv64 123/129 Installing : python2-libs-2.7.14-9.f [ ] 124/129 Installing : python2-libs-2.7.14-9.f [= ] 124/129 Installing : python2-libs-2.7.14-9.f [== ] 124/129 Installing : python2-libs-2.7.14-9.f [=== ] 124/129 Installing : python2-libs-2.7.14-9.f [==== ] 124/129 Installing : python2-libs-2.7.14-9.f [===== ] 124/129 Installing : python2-libs-2.7.14-9.f [====== ] 124/129 Installing : python2-libs-2.7.14-9.f [======= ] 124/129 Installing : python2-libs-2.7.14-9.f [======== ] 124/129 Installing : python2-libs-2.7.14-9.f [========= ] 124/129 Installing : python2-libs-2.7.14-9.f [========== ] 124/129 Installing : python2-libs-2.7.14-9.f [=========== ] 124/129 Installing : python2-libs-2.7.14-9.f [============ ] 124/129 Installing : python2-libs-2.7.14-9.f [============= ] 124/129 Installing : python2-libs-2.7.14-9.f [============== ] 124/129 Installing : python2-libs-2.7.14-9.f [=============== ] 124/129 Installing : python2-libs-2.7.14-9.f [================ ] 124/129 Installing : python2-libs-2.7.14-9.f [================= ] 124/129 Installing : python2-libs-2.7.14-9.f [================== ] 124/129 Installing : python2-libs-2.7.14-9.f [=================== ] 124/129 Installing : python2-libs-2.7.14-9.f [==================== ] 124/129 Installing : python2-libs-2.7.14-9.f [===================== ] 124/129 Installing : python2-libs-2.7.14-9.f [====================== ] 124/129 Installing : python2-libs-2.7.14-9.f [======================= ] 124/129 Installing : python2-libs-2.7.14-9.fc28.riscv64 124/129 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 124/129 Installing : python2-2.7.14-9.fc28.r [ ] 125/129 Installing : python2-2.7.14-9.fc28.r [===== ] 125/129 Installing : python2-2.7.14-9.fc28.r [====== ] 125/129 Installing : python2-2.7.14-9.fc28.r [============= ] 125/129 Installing : python2-2.7.14-9.fc28.r [=================== ] 125/129 Installing : python2-2.7.14-9.fc28.r [====================== ] 125/129 Installing : python2-2.7.14-9.fc28.r [======================= ] 125/129 Installing : python2-2.7.14-9.fc28.riscv64 125/129 Installing : make-1:4.2.1-6.fc27.ris [ ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [= ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [=== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [==== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [===== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [====== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [======= ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [======== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [========= ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [========== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [=========== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [============ ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [============= ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [============== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [=============== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [================ ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [================= ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [================== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [=================== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [==================== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [===================== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [====================== ] 126/129 Installing : make-1:4.2.1-6.fc27.ris [======================= ] 126/129 Installing : make-1:4.2.1-6.fc27.riscv64 126/129 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 126/129 Installing : perl-CPAN-2.18-408.fc27 [ ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [= ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [=== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [==== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [===== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [====== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [======= ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [======== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [========= ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [========== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [=========== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [============ ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [============= ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [============== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [=============== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [================ ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [================= ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [================== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [=================== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [==================== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [===================== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [====================== ] 127/129 Installing : perl-CPAN-2.18-408.fc27 [======================= ] 127/129 Installing : perl-CPAN-2.18-408.fc27.0.riscv64.noarch 127/129 Installing : perl-4:5.26.1-408.fc28. [ ] 128/129 Installing : perl-4:5.26.1-408.fc28.1.riscv64.riscv64 128/129 Installing : perl-Encode-Locale-1.05 [ ] 129/129 Installing : perl-Encode-Locale-1.05 [=== ] 129/129 Installing : perl-Encode-Locale-1.05 [==== ] 129/129 Installing : perl-Encode-Locale-1.05 [========= ] 129/129 Installing : perl-Encode-Locale-1.05 [======================= ] 129/129 Installing : perl-Encode-Locale-1.05-8.fc27.noarch 129/129 Running scriptlet: perl-Encode-Locale-1.05-8.fc27.noarch 129/129 Verifying : perl-4:5.26.1-408.fc28.1.riscv64.riscv64 1/129 Verifying : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 2/129 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.ris 3/129 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 4/129 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 5/129 Verifying : perl-utils-5.26.1-408.fc28.1.riscv64.noarch 6/129 Verifying : python2-2.7.14-9.fc28.riscv64 7/129 Verifying : python2-libs-2.7.14-9.fc28.riscv64 8/129 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 9/129 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 10/129 Verifying : perl-File-Path-2.15-1.fc27.noarch 11/129 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64 12/129 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 13/129 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 14/129 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 15/129 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/129 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 17/129 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.r 18/129 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 19/129 Verifying : perl-threads-1:2.21-1.fc27.riscv64 20/129 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 21/129 Verifying : perl-ExtUtils-Install-2.14-3.fc27.noarch 22/129 Verifying : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 23/129 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 24/129 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 25/129 Verifying : perl-Archive-Tar-2.26-4.fc27.noarch 26/129 Verifying : perl-Text-Diff-1.44-5.fc27.noarch 27/129 Verifying : perl-Algorithm-Diff-1.1903-8.fc27.noarch 28/129 Verifying : perl-Attribute-Handlers-0.99-408.fc28.1.riscv64. 29/129 Verifying : perl-B-Debug-1.26-1.fc27.noarch 30/129 Verifying : perl-CPAN-2.18-408.fc27.0.riscv64.noarch 31/129 Verifying : perl-Module-Build-2:0.42.24-4.fc27.noarch 32/129 Verifying : perl-Software-License-0.103012-7.fc27.noarch 33/129 Verifying : perl-inc-latest-2:0.500-8.fc27.noarch 34/129 Verifying : perl-Data-Section-0.200007-2.fc27.noarch 35/129 Verifying : perl-Text-Template-1.47-3.fc27.noarch 36/129 Verifying : perl-MRO-Compat-0.13-3.fc27.noarch 37/129 Verifying : perl-Sub-Exporter-0.987-13.fc27.noarch 38/129 Verifying : perl-Data-OptList-0.110-5.fc27.noarch 39/129 Verifying : perl-Package-Generator-1.106-10.fc27.noarch 40/129 Verifying : perl-Sub-Install-0.928-13.fc27.noarch 41/129 Verifying : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarc 42/129 Verifying : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.ris 43/129 Verifying : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noa 44/129 Verifying : perl-Config-Perl-V-0.28-408.fc27.0.riscv64.noarc 45/129 Verifying : perl-Devel-SelfStubber-1.06-408.fc28.1.riscv64.n 46/129 Verifying : perl-Digest-1.17-408.fc27.0.riscv64.noarch 47/129 Verifying : perl-Env-1.04-408.fc27.0.riscv64.noarch 48/129 Verifying : perl-ExtUtils-CBuilder-1:0.280230-1.fc27.noarch 49/129 Verifying : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 50/129 Verifying : perl-ExtUtils-Embed-1.34-408.fc28.1.riscv64.noar 51/129 Verifying : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 52/129 Verifying : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.n 53/129 Verifying : perl-ExtUtils-Miniperl-1.06-408.fc28.1.riscv64.n 54/129 Verifying : perl-File-Fetch-0.56-1.fc27.noarch 55/129 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noar 56/129 Verifying : perl-Filter-Simple-0.94-1.fc27.noarch 57/129 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 58/129 Verifying : perl-IO-Compress-2.074-408.fc27.0.riscv64.noarch 59/129 Verifying : perl-IO-Socket-IP-0.39-4.fc27.noarch 60/129 Verifying : perl-IO-Zlib-1:1.10-408.fc28.1.riscv64.noarch 61/129 Verifying : perl-IPC-Cmd-2:0.98-4.fc27.noarch 62/129 Verifying : perl-JSON-PP-1:2.94-4.fc27.noarch 63/129 Verifying : perl-Locale-Codes-3.55-1.fc27.noarch 64/129 Verifying : perl-Locale-Maketext-1.28-408.fc27.0.riscv64.noa 65/129 Verifying : perl-Locale-Maketext-Simple-1:0.21-408.fc28.1.ri 66/129 Verifying : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 67/129 Verifying : perl-Math-BigRat-0.2613-2.fc27.noarch 68/129 Verifying : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 69/129 Verifying : perl-Memoize-1.03-408.fc28.1.riscv64.noarch 70/129 Verifying : perl-Module-CoreList-1:5.20180120-1.fc27.noarch 71/129 Verifying : perl-Module-CoreList-tools-1:5.20180120-1.fc27.n 72/129 Verifying : perl-Module-Load-1:0.32-408.fc27.0.riscv64.noarc 73/129 Verifying : perl-Module-Load-Conditional-0.68-408.fc27.0.ris 74/129 Verifying : perl-Module-Loaded-1:0.08-408.fc28.1.riscv64.noa 75/129 Verifying : perl-Module-Metadata-1.000033-408.fc27.0.riscv64 76/129 Verifying : perl-Net-Ping-2.55-408.fc28.1.riscv64.noarch 77/129 Verifying : perl-Params-Check-1:0.38-408.fc27.0.riscv64.noar 78/129 Verifying : perl-Perl-OSType-1.010-408.fc27.0.riscv64.noarch 79/129 Verifying : perl-PerlIO-via-QuotedPrint-0.08-408.fc27.0.risc 80/129 Verifying : perl-Pod-Checker-4:1.73-408.fc27.0.riscv64.noarc 81/129 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarc 82/129 Verifying : perl-Pod-Html-1.22.02-408.fc28.1.riscv64.noarch 83/129 Verifying : perl-Pod-Parser-1.63-408.fc27.0.riscv64.noarch 84/129 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 85/129 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 86/129 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 87/129 Verifying : perl-SelfLoader-1.23-408.fc28.1.riscv64.noarch 88/129 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noar 89/129 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 90/129 Verifying : perl-Test-1.30-408.fc28.1.riscv64.noarch 91/129 Verifying : perl-Test-Harness-1:3.39-4.fc27.noarch 92/129 Verifying : perl-Test-Simple-1:1.302103-1.fc27.noarch 93/129 Verifying : perl-Text-Balanced-2.03-408.fc27.0.riscv64.noarc 94/129 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noa 95/129 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 96/129 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 97/129 Verifying : perl-autodie-2.29-408.fc27.0.riscv64.noarch 98/129 Verifying : perl-bignum-0.47-408.fc27.0.riscv64.noarch 99/129 Verifying : perl-experimental-0.019-1.fc27.noarch 100/129 Verifying : perl-libnet-3.11-1.fc27.noarch 101/129 Verifying : perl-libnetcfg-4:5.26.1-408.fc28.1.riscv64.noarc 102/129 Verifying : perl-open-1.11-408.fc28.1.riscv64.noarch 103/129 Verifying : perl-perlfaq-5.021011-408.fc27.0.riscv64.noarch 104/129 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 105/129 Verifying : perl-version-6:0.99.18-5.fc28.riscv64 106/129 Verifying : perl-Compress-Raw-Bzip2-2.074-408.fc27.0.riscv64 107/129 Verifying : perl-Compress-Raw-Zlib-2.076-1.fc28.riscv64 108/129 Verifying : perl-DB_File-1.840-408.fc27.0.riscv64.riscv64 109/129 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv6 110/129 Verifying : perl-Devel-PPPort-3.36-4.fc28.riscv64 111/129 Verifying : perl-Devel-Peek-1.26-408.fc28.1.riscv64.riscv64 112/129 Verifying : perl-Digest-MD5-2.55-408.fc27.0.riscv64.riscv64 113/129 Verifying : perl-Digest-SHA-1:6.01-1.fc28.riscv64 114/129 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 115/129 Verifying : perl-Filter-2:1.58-1.fc28.riscv64 116/129 Verifying : perl-IPC-SysV-2.07-408.fc27.0.riscv64.riscv64 117/129 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 118/129 Verifying : perl-Math-BigInt-FastCalc-0.500.600-5.fc28.riscv 119/129 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 120/129 Verifying : perl-Sys-Syslog-0.35-408.fc27.0.riscv64.riscv64 121/129 Verifying : perl-Time-HiRes-1.9753-1.fc28.riscv64 122/129 Verifying : perl-Time-Piece-1.31-408.fc28.1.riscv64.riscv64 123/129 Verifying : perl-Unicode-Collate-1.25-1.fc28.riscv64 124/129 Verifying : perl-encoding-4:2.19-408.fc27.0.riscv64.riscv64 125/129 Verifying : perl-ExtUtils-MM-Utils-1:7.30-2.fc27.noarch 126/129 Verifying : perl-Params-Util-1.07-20.fc28.riscv64 127/129 Verifying : make-1:4.2.1-6.fc27.riscv64 128/129 Verifying : perl-Encode-Locale-1.05-8.fc27.noarch 129/129 Installed: perl.riscv64 4:5.26.1-408.fc28.1.riscv64 python2.riscv64 2.7.14-9.fc28 perl-Encode-Locale.noarch 1.05-8.fc27 make.riscv64 1:4.2.1-6.fc27 perl-Algorithm-Diff.noarch 1.1903-8.fc27 perl-Archive-Tar.noarch 2.26-4.fc27 perl-Attribute-Handlers.noarch 0.99-408.fc28.1.riscv64 perl-B-Debug.noarch 1.26-1.fc27 perl-CPAN.noarch 2.18-408.fc27.0.riscv64 perl-CPAN-Meta.noarch 2.150010-408.fc27.0.riscv64 perl-CPAN-Meta-Requirements.noarch 2.140-408.fc27.0.riscv64 perl-CPAN-Meta-YAML.noarch 0.018-408.fc27.0.riscv64 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Compress-Raw-Bzip2.riscv64 2.074-408.fc27.0.riscv64 perl-Compress-Raw-Zlib.riscv64 2.076-1.fc28 perl-Config-Perl-V.noarch 0.28-408.fc27.0.riscv64 perl-DB_File.riscv64 1.840-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Data-OptList.noarch 0.110-5.fc27 perl-Data-Section.noarch 0.200007-2.fc27 perl-Devel-PPPort.riscv64 3.36-4.fc28 perl-Devel-Peek.riscv64 1.26-408.fc28.1.riscv64 perl-Devel-SelfStubber.noarch 1.06-408.fc28.1.riscv64 perl-Digest.noarch 1.17-408.fc27.0.riscv64 perl-Digest-MD5.riscv64 2.55-408.fc27.0.riscv64 perl-Digest-SHA.riscv64 1:6.01-1.fc28 perl-Encode.riscv64 4:2.94-16.fc27 perl-Env.noarch 1.04-408.fc27.0.riscv64 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-ExtUtils-CBuilder.noarch 1:0.280230-1.fc27 perl-ExtUtils-Command.noarch 1:7.30-2.fc27 perl-ExtUtils-Embed.noarch 1.34-408.fc28.1.riscv64 perl-ExtUtils-Install.noarch 2.14-3.fc27 perl-ExtUtils-MM-Utils.noarch 1:7.30-2.fc27 perl-ExtUtils-MakeMaker.noarch 1:7.30-2.fc27 perl-ExtUtils-Manifest.noarch 1.70-408.fc27.0.riscv64 perl-ExtUtils-Miniperl.noarch 1.06-408.fc28.1.riscv64 perl-ExtUtils-ParseXS.noarch 1:3.35-1.fc27 perl-File-Fetch.noarch 0.56-1.fc27 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Filter.riscv64 2:1.58-1.fc28 perl-Filter-Simple.noarch 0.94-1.fc27 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-IO-Compress.noarch 2.074-408.fc27.0.riscv64 perl-IO-Socket-IP.noarch 0.39-4.fc27 perl-IO-Zlib.noarch 1:1.10-408.fc28.1.riscv64 perl-IPC-Cmd.noarch 2:0.98-4.fc27 perl-IPC-SysV.riscv64 2.07-408.fc27.0.riscv64 perl-JSON-PP.noarch 1:2.94-4.fc27 perl-Locale-Codes.noarch 3.55-1.fc27 perl-Locale-Maketext.noarch 1.28-408.fc27.0.riscv64 perl-Locale-Maketext-Simple.noarch 1:0.21-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-MRO-Compat.noarch 0.13-3.fc27 perl-Math-BigInt.noarch 1:1.9998.11-4.fc27 perl-Math-BigInt-FastCalc.riscv64 0.500.600-5.fc28 perl-Math-BigRat.noarch 0.2613-2.fc27 perl-Math-Complex.noarch 1.59-408.fc28.1.riscv64 perl-Memoize.noarch 1.03-408.fc28.1.riscv64 perl-Module-Build.noarch 2:0.42.24-4.fc27 perl-Module-CoreList.noarch 1:5.20180120-1.fc27 perl-Module-CoreList-tools.noarch 1:5.20180120-1.fc27 perl-Module-Load.noarch 1:0.32-408.fc27.0.riscv64 perl-Module-Load-Conditional.noarch 0.68-408.fc27.0.riscv64 perl-Module-Loaded.noarch 1:0.08-408.fc28.1.riscv64 perl-Module-Metadata.noarch 1.000033-408.fc27.0.riscv64 perl-Net-Ping.noarch 2.55-408.fc28.1.riscv64 perl-Package-Generator.noarch 1.106-10.fc27 perl-Params-Check.noarch 1:0.38-408.fc27.0.riscv64 perl-Params-Util.riscv64 1.07-20.fc28 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Perl-OSType.noarch 1.010-408.fc27.0.riscv64 perl-PerlIO-via-QuotedPrint.noarch 0.08-408.fc27.0.riscv64 perl-Pod-Checker.noarch 4:1.73-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Html.noarch 1.22.02-408.fc28.1.riscv64 perl-Pod-Parser.noarch 1.63-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-SelfLoader.noarch 1.23-408.fc28.1.riscv64 perl-Socket.riscv64 4:2.027-1.fc27 perl-Software-License.noarch 0.103012-7.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Sub-Exporter.noarch 0.987-13.fc27 perl-Sub-Install.noarch 0.928-13.fc27 perl-Sys-Syslog.riscv64 0.35-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Test.noarch 1.30-408.fc28.1.riscv64 perl-Test-Harness.noarch 1:3.39-4.fc27 perl-Test-Simple.noarch 1:1.302103-1.fc27 perl-Text-Balanced.noarch 2.03-408.fc27.0.riscv64 perl-Text-Diff.noarch 1.44-5.fc27 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.serial8250: too much work for irq11 noarch 2013.0523-408.fc27.0.riscv64 perl-Text-Template.noarch 1.47-3.fc27 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-HiRes.riscv64 1.9753-1.fc28 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Time-Piece.riscv64 1.31-408.fc28.1.riscv64 perl-Unicode-Collate.riscv64 1.25-1.fc28 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-autodie.noarch 2.29-408.fc27.0.riscv64 perl-bignum.noarch 0.47-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-devel.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-encoding.riscv64 4:2.19-408.fc27.0.riscv64 perl-experimental.noarch 0.019-1.fc27 perl-inc-latest.noarch 2:0.500-8.fc27 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libnet.noarch 3.11-1.fc27 perl-libnetcfg.noarch 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-open.noarch 1.11-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-perlfaq.noarch 5.021011-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 perl-utils.noarch 5.26.1-408.fc28.1.riscv64 perl-version.riscv64 6:0.99.18-5.fc28 python2-libs.riscv64 2.7.14-9.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:07:01 ago on Wed Feb 21 15:47:33 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:07:21 ago on Wed Feb 21 15:47:33 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group shadow-utils info redhat-rpm-config bzip2 gzip util-linux sed which patch gawk unzip rpm-build tar cpio fedora-release xz diffutils grep bash coreutils findutils make ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 30 Packages Total download size: 12 M Installed size: 49 M Downloading Packages: (1/30): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1/30): redhat-rpm-config-96-1.fc28.0.riscv64.n 757 kB/s | 75 kB 00:00 (2-3/30): tar-1.29-7 1% [ ] 1.5 MB/s | 235 kB 00:07 ETA (2/30): nim-srpm-macros-1-1.fc28.noarch.rpm 268 kB/s | 7.6 kB 00:00 (3-4/30): tar-1.29-7 2% [ ] 1.5 MB/s | 274 kB 00:07 ETA (3/30): ocaml-srpm-macros-5-2.fc27.noarch.rpm 289 kB/s | 7.8 kB 00:00 (4-5/30): tar-1.29-7 2% [- ] 1.5 MB/s | 314 kB 00:08 ETA (4/30): openblas-srpm-macros-2-2.fc27.noarch.rp 273 kB/s | 6.6 kB 00:00 (5-6/30): tar-1.29-7 2% [- ] 1.5 MB/s | 353 kB 00:08 ETA (5/30): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 352 kB/s | 9.0 kB 00:00 (6-7/30): tar-1.29-7 3% [- ] 1.5 MB/s | 394 kB 00:08 ETA (6/30): rust-srpm-macros-5-1.fc28.noarch.rpm 309 kB/s | 8.0 kB 00:00 (7-8/30): tar-1.29-7 3% [- ] 1.5 MB/s | 434 kB 00:08 ETA (7/30): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 868 kB/s | 235 kB 00:00 (8-9/30): tar-1.29-7 9% [=- ] 1.5 MB/s | 1.1 MB 00:07 ETA (8/30): diffutils-3.6-3.fc28.riscv64.rpm 607 kB/s | 577 kB 00:00 (9-10/30): tar-1.29- 13% [==- ] 1.5 MB/s | 1.7 MB 00:06 ETA (9/30): which-2.21-4.fc28.riscv64.rpm 698 kB/s | 65 kB 00:00 (10-11/30): zstd-1.3 15% [=== ] 1.5 MB/s | 1.9 MB 00:06 ETA (10/30): tar-1.29-7.fc27.riscv64.rpm 587 kB/s | 805 kB 00:01 (11-12/30): patch-2. 18% [===- ] 1.5 MB/s | 2.3 MB 00:06 ETA (11/30): patch-2.7.5-6.fc27.riscv64.rpm 638 kB/s | 270 kB 00:00 (12-13/30): unzip-6. 22% [==== ] 1.6 MB/s | 2.7 MB 00:06 ETA (12/30): xz-5.2.3-5.fc28.riscv64.rpm 889 kB/s | 212 kB 00:00 (13-14/30): unzip-6. 27% [===== ] 1.6 MB/s | 3.3 MB 00:05 ETA (13/30): unzip-6.0-36.fc28.riscv64.rpm 725 kB/s | 398 kB 00:00 (14-15/30): bzip2-1. 28% [=====- ] 1.6 MB/s | 3.5 MB 00:05 ETA (14/30): bzip2-1.0.6-24.fc28.riscv64.rpm 422 kB/s | 81 kB 00:00 (15-16/30): elfutils 29% [=====- ] 1.6 MB/s | 3.6 MB 00:05 ETA (15/30): file-5.32-3.fc28.riscv64.rpm 750 kB/s | 81 kB 00:00 (16-17/30): zstd-1.3 31% [====== ] 1.6 MB/s | 3.8 MB 00:05 ETA (16/30): zstd-1.3.3-1.fc27.riscv64.rpm 643 kB/s | 1.1 MB 00:01 (17-18/30): elfutils 36% [======= ] 1.6 MB/s | 4.4 MB 00:04 ETA (17/30): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 523 kB/s | 14 kB 00:00 (18-19/30): elfutils 37% [======= ] 1.6 MB/s | 4.5 MB 00:04 ETA (18/30): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 579 kB/s | 15 kB 00:00 (19-20/30): elfutils 37% [======= ] 1.6 MB/s | 4.5 MB 00:04 ETA (19/30): pkgconf-1.4.1-1.fc27.riscv64.rpm 628 kB/s | 35 kB 00:00 (20-21/30): elfutils 38% [=======- ] 1.6 MB/s | 4.7 MB 00:04 ETA (20/30): libpkgconf-1.4.1-1.fc27.riscv64.rpm 794 kB/s | 74 kB 00:00 (21-22/30): elfutils 40% [======== ] 1.6 MB/s | 4.9 MB 00:04 ETA (21/30): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 298 kB/s | 7.5 kB 00:00 (22-23/30): elfutils 40% [======== ] 1.6 MB/s | 4.9 MB 00:04 ETA (22/30): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 331 kB/s | 8.2 kB 00:00 (23-24/30): elfutils 40% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (23/30): gnat-srpm-macros-4-5.fc28.noarch.rpm 345 kB/s | 8.8 kB 00:00 (24-25/30): elfutils 41% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (24/30): go-srpm-macros-2-11.fc28.noarch.rpm 260 kB/s | 8.4 kB 00:00 (25-26/30): elfutils 41% [======== ] 1.6 MB/s | 5.0 MB 00:04 ETA (25/30): perl-srpm-macros-1-26.fc28.noarch.rpm 336 kB/s | 9.7 kB 00:00 (26-27/30): elfutils 41% [======== ] 1.6 MB/s | 5.1 MB 00:04 ETA (26/30): python-srpm-macros-3-26.fc28.noarch.rp 385 kB/s | 10 kB 00:00 (27-28/30): binutils 42% [======== ] 1.5 MB/s | 5.1 MB 00:04 ETA (27/30): dwz-0.12-5.fc28.riscv64.rpm 836 kB/s | 108 kB 00:00 (28-29/30): binutils 44% [========- ] 1.6 MB/s | 5.5 MB 00:04 ETA (28/30): elfutils-0.170-4.fc28.riscv64.rpm 517 kB/s | 791 kB 00:01 (29-30/30): zip-3.0- 46% [========= ] 1.5 MB/s | 5.7 MB 00:04 ETA (29/30): zip-3.0-20.fc28.riscv64.rpm 805 kB/s | 271 kB 00:00 (30/30): binutils-2. 49% [=========- ] 1.6 MB/s | 6.1 MB 00:03 ETA (30/30): binutils-2. 56% [=========== ] 1.6 MB/s | 6.9 MB 00:03 ETA (30/30): binutils-2. 64% [============- ] 1.7 MB/s | 7.8 MB 00:02 ETA (30/30): binutils-2. 71% [============== ] 1.8 MB/s | 8.6 MB 00:01 ETA (30/30): binutils-2. 78% [===============- ] 1.9 MB/s | 9.5 MB 00:01 ETA (30/30): binutils-2. 85% [================= ] 1.9 MB/s | 10 MB 00:00 ETA (30/30): binutils-2. 92% [==================- ] 2.0 MB/s | 11 MB 00:00 ETA (30/30): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/30 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/30 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/30 Installing : file-5.32-3.fc28.riscv64 1/30 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/30 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/30 Installing : unzip-6.0-36.fc28.riscv64 2/30 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/30 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/30 Installing : zip-3.0-20.fc28.riscv64 3/30 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/30 Installing : dwz-0.12-5.fc28.riscv64 4/30 Installing : python-srpm-macros-3-26. [ ] 5/30 Installing : python-srpm-macros-3-26. [======================= ] 5/30 Installing : python-srpm-macros-3-26.fc28.noarch 5/30 Installing : perl-srpm-macros-1-26.fc [ ] 6/30 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/30 Installing : perl-srpm-macros-1-26.fc28.noarch 6/30 Installing : go-srpm-macros-2-11.fc28 [ ] 7/30 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/30 Installing : go-srpm-macros-2-11.fc28.noarch 7/30 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/30 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/30 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/30 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/30 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/30 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/30 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/30 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/30 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/30 Installing : libpkgconf-1.4.1-1.fc27. [ ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 11/30 Installing : libpkgconf-1.4.1-1.fc27.riscv64 11/30 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 11/30 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 12/30 Installing : pkgconf-1.4.1-1.fc27.riscv64 12/30 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 13/30 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 13/30 Installing : pkgconf-pkg-config-1.4.1 [ ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [==== ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [===== ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 14/30 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 14/30 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 14/30 Installing : binutils-2.30-1.fc28.ris [ ] 15/30 Installing : binutils-2.30-1.fc28.ris [= ] 15/30 Installing : binutils-2.30-1.fc28.ris [== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=== ] 15/30 Installing : binutils-2.30-1.fc28.ris [==== ] 15/30 Installing : binutils-2.30-1.fc28.ris [===== ] 15/30 Installing : binutils-2.30-1.fc28.ris [====== ] 15/30 Installing : binutils-2.30-1.fc28.ris [======= ] 15/30 Installing : binutils-2.30-1.fc28.ris [======== ] 15/30 Installing : binutils-2.30-1.fc28.ris [========= ] 15/30 Installing : binutils-2.30-1.fc28.ris [========== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=========== ] 15/30 Installing : binutils-2.30-1.fc28.ris [============ ] 15/30 Installing : binutils-2.30-1.fc28.ris [============= ] 15/30 Installing : binutils-2.30-1.fc28.ris [============== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=============== ] 15/30 Installing : binutils-2.30-1.fc28.ris [================ ] 15/30 Installing : binutils-2.30-1.fc28.ris [================= ] 15/30 Installing : binutils-2.30-1.fc28.ris [================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [=================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [==================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [===================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [====================== ] 15/30 Installing : binutils-2.30-1.fc28.ris [======================= ] 15/30 Installing : binutils-2.30-1.fc28.ris [======================== ] 15/30 Installing : binutils-2.30-1.fc28.riscv64 15/30 Running scriptlet: binutils-2.30-1.fc28.riscv64 15/30 Installing : elfutils-0.170-4.fc28.ri [ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [==== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [===== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [====== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [========= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [========== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=========== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [============== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=============== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================ ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [=================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [==================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [===================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [====================== ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======================= ] 16/30 Installing : elfutils-0.170-4.fc28.ri [======================== ] 16/30 Installing : elfutils-0.170-4.fc28.riscv64 16/30 Installing : bzip2-1.0.6-24.fc28.risc [ ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 17/30 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 17/30 Installing : bzip2-1.0.6-24.fc28.riscv64 17/30 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 18/30 Installing : xz-5.2.3-5.fc28.riscv64 18/30 Installing : patch-2.7.5-6.fc27.riscv [ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [==== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [===== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [====== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [========= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [========== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [============== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================ ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 19/30 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 19/30 Installing : patch-2.7.5-6.fc27.riscv64 19/30 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 20/30 Installing : zstd-1.3.3-1.fc27.riscv64 20/30 Installing : rust-srpm-macros-5-1.fc2 [ ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/30 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/30 Installing : rust-srpm-macros-5-1.fc28.noarch 21/30 Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/30 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/30 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/30 Installing : openblas-srpm-macros-2-2 [ ] 23/30 Installing : openblas-srpm-macros-2-2 [================ ] 23/30 Installing : openblas-srpm-macros-2-2.fc27.noarch 23/30 Installing : ocaml-srpm-macros-5-2.fc [ ] 24/30 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/30 Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/30 Installing : nim-srpm-macros-1-1.fc28 [ ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/30 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/30 Installing : nim-srpm-macros-1-1.fc28.noarch 25/30 Installing : redhat-rpm-config-96-1.f [ ] 26/30 Installing : redhat-rpm-config-96-1.f [== ] 26/30 Installing : redhat-rpm-config-96-1.f [=== ] 26/30 Installing : redhat-rpm-config-96-1.f [========= ] 26/30 Installing : redhat-rpm-config-96-1.f [=========== ] 26/30 Installing : redhat-rpm-config-96-1.f [================= ] 26/30 Installing : redhat-rpm-config-96-1.f [================== ] 26/30 Installing : redhat-rpm-config-96-1.f [=================== ] 26/30 Installing : redhat-rpm-config-96-1.f [===================== ] 26/30 Installing : redhat-rpm-config-96-1.f [====================== ] 26/30 Installing : redhat-rpm-config-96-1.f [======================== ] 26/30 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/30 Installing : diffutils-3.6-3.fc28.ris [ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [==== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [===== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [====== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [========= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [========== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=========== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [============== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=============== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================ ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [=================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [==================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [===================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [====================== ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======================= ] 27/30 Installing : diffutils-3.6-3.fc28.ris [======================== ] 27/30 Installing : diffutils-3.6-3.fc28.riscv64 27/30 Running scriptlet: diffutils-3.6-3.fc28.riscv64 27/30 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 28/30 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 28/30 Installing : tar-2:1.29-7.fc27.riscv64 28/30 Running scriptlet: tar-2:1.29-7.fc27.riscv64 28/30 Installing : rpm-build-4.14.1-6.fc28. [ ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [= ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [=== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [==== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [===== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [====== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [======= ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [======== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [========= ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [============ ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [============== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [================ ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [================= ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 29/30 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 29/30 Installing : which-2.21-4.fc28.riscv6 [ ] 30/30 Installing : which-2.21-4.fc28.riscv6 [===== ] 30/30 Installing : which-2.21-4.fc28.riscv6 [=========== ] 30/30 Installing : which-2.21-4.fc28.riscv6 [=============== ] 30/30 Installing : which-2.21-4.fc28.riscv6 [================ ] 30/30 Installing : which-2.21-4.fc28.riscv6 [================= ] 30/30 Installing : which-2.21-4.fc28.riscv6 [================== ] 30/30 Installing : which-2.21-4.fc28.riscv6 [======================== ] 30/30 Installing : which-2.21-4.fc28.riscv64 30/30 Running scriptlet: which-2.21-4.fc28.riscv64 30/30 Verifying : tar-2:1.29-7.fc27.riscv64 1/30 Verifying : diffutils-3.6-3.fc28.riscv64 2/30 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/30 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/30 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/30 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/30 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/30 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/30 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/30 Verifying : zstd-1.3.3-1.fc27.riscv64 10/30 Verifying : which-2.21-4.fc28.riscv64 11/30 Verifying : patch-2.7.5-6.fc27.riscv64 12/30 Verifying : unzip-6.0-36.fc28.riscv64 13/30 Verifying : xz-5.2.3-5.fc28.riscv64 14/30 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/30 Verifying : elfutils-0.170-4.fc28.riscv64 16/30 Verifying : file-5.32-3.fc28.riscv64 17/30 Verifying : binutils-2.30-1.fc28.riscv64 18/30 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 19/30 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 20/30 Verifying : pkgconf-1.4.1-1.fc27.riscv64 21/30 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 22/30 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 23/30 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 24/30 Verifying : gnat-srpm-macros-4-5.fc28.noarch 25/30 Verifying : go-srpm-macros-2-11.fc28.noarch 26/30 Verifying : perl-srpm-macros-1-26.fc28.noarch 27/30 Verifying : python-srpm-macros-3-26.fc28.noarch 28/30 Verifying : dwz-0.12-5.fc28.riscv64 29/30 Verifying : zip-3.0-20.fc28.riscv64 30/30 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:09:20 ago on Wed Feb 21 15:47:33 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 553 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 614 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-devel 36% [======= ] 756 kB/s | 942 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 830 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 808 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 89% [=================- ] 951 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 967 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 948 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 995 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off