OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 15:27:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libtnc-1.25-13.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libtnc.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [= ] 2.8 MB/s | 863 kB 00:03 ETA Local RPMS 14% [==- ] 2.8 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 2.8 MB/s | 2.6 MB 00:03 ETA Local RPMS 31% [====== ] 2.8 MB/s | 3.6 MB 00:02 ETA Local RPMS 39% [=======- ] 2.9 MB/s | 4.5 MB 00:02 ETA Local RPMS 47% [========= ] 2.9 MB/s | 5.4 MB 00:02 ETA Local RPMS 54% [==========- ] 2.9 MB/s | 6.2 MB 00:01 ETA Local RPMS 58% [===========- ] 2.6 MB/s | 6.7 MB 00:01 ETA Local RPMS 66% [============= ] 2.7 MB/s | 7.6 MB 00:01 ETA Local RPMS 74% [==============- ] 2.7 MB/s | 8.5 MB 00:01 ETA Local RPMS 82% [================- ] 2.7 MB/s | 9.4 MB 00:00 ETA Local RPMS 90% [================== ] 2.7 MB/s | 10 MB 00:00 ETA Local RPMS 99% [===================-] 2.7 MB/s | 11 MB 00:00 ETA Local RPMS 2.2 MB/s | 11 MB 00:05 Last metadata expiration check: 0:01:20 ago on Wed Feb 21 15:27:34 2018. sh: /usr/bin/perl: No such file or directory sh: /usr/bin/perl: No such file or directory Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libxml2-devel riscv64 2.9.3-4.fc28 local 1.1 M perl-ExtUtils-MakeMaker noarch 1:7.30-2.fc27 local 296 k zlib-devel riscv64 1.2.11-4.fc28 local 56 k Installing dependencies: libpkgconf riscv64 1.4.1-1.fc27 local 74 k perl-CPAN-Meta-YAML noarch 0.018-408.fc27.0.riscv64 local 77 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-ExtUtils-Command noarch 1:7.30-2.fc27 local 17 k perl-ExtUtils-Install noarch 2.14-3.fc27 local 45 k perl-ExtUtils-Manifest noarch 1.70-408.fc27.0.riscv64 local 80 k perl-ExtUtils-ParseXS noarch 1:3.35-1.fc27 local 81 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-JSON-PP noarch 1:2.94-4.fc27 local 65 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-Math-BigInt noarch 1:1.9998.11-4.fc27 local 194 k perl-Math-Complex noarch 1.59-408.fc28.1.riscv64 local 105 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Test-Harness noarch 1:3.39-4.fc27 local 276 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-devel riscv64 4:5.26.1-408.fc28.1.riscv64 local 593 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k perl-version riscv64 6:0.99.18-5.fc28 local 99 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k xz-devel riscv64 5.2.3-5.fc28 local 60 k Installing weak dependencies: perl-CPAN-Meta noarch 2.150010-408.fc27.0.riscv64 local 189 k perl-CPAN-Meta-Requirements noarch 2.140-408.fc27.0.riscv64 local 79 k perl-Encode-Locale noarch 1.05-8.fc27 local 20 k perl-Time-HiRes riscv64 1.9753-1.fc28 local 93 k Transaction Summary ================================================================================ Install 56 Packages Total download size: 18 M Installed size: 60 M Downloading Packages: (1/56): libxml2-deve 0% [ ] --- B/s | 0 B --:-- ETA (1/56): zlib-devel-1.2.11-4.fc28.riscv64.rpm 731 kB/s | 56 kB 00:00 (2-3/56): perl-ExtUt 0% [ ] 1.4 MB/s | 184 kB 00:12 ETA (2/56): xz-devel-5.2.3-5.fc28.riscv64.rpm 756 kB/s | 60 kB 00:00 (3-4/56): perl-ExtUt 1% [ ] 1.4 MB/s | 372 kB 00:12 ETA (3/56): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 528 kB/s | 14 kB 00:00 (4-5/56): libxml2-de 2% [ ] 1.4 MB/s | 418 kB 00:12 ETA (4/56): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 595 kB/s | 15 kB 00:00 (5-6/56): libxml2-de 2% [- ] 1.4 MB/s | 465 kB 00:12 ETA (5/56): pkgconf-1.4.1-1.fc27.riscv64.rpm 649 kB/s | 35 kB 00:00 (6-7/56): libxml2-de 3% [- ] 1.4 MB/s | 596 kB 00:12 ETA (6/56): libpkgconf-1.4.1-1.fc27.riscv64.rpm 775 kB/s | 74 kB 00:00 (7-8/56): libxml2-de 4% [- ] 1.4 MB/s | 830 kB 00:12 ETA (7/56): perl-ExtUtils-MakeMaker-7.30-2.fc27.noa 505 kB/s | 296 kB 00:00 (8-9/56): libxml2-de 4% [- ] 1.4 MB/s | 870 kB 00:12 ETA (8/56): perl-Carp-1.42-408.fc27.0.riscv64.noarc 464 kB/s | 84 kB 00:00 (9-10/56): libxml2-d 5% [= ] 1.4 MB/s | 1.1 MB 00:12 ETA (9/56): perl-Exporter-5.72-408.fc27.0.riscv64.n 558 kB/s | 87 kB 00:00 (10-11/56): libxml2- 6% [= ] 1.4 MB/s | 1.1 MB 00:12 ETA (10/56): perl-ExtUtils-Command-7.30-2.fc27.noar 202 kB/s | 17 kB 00:00 (11-12/56): libxml2- 6% [= ] 1.4 MB/s | 1.1 MB 00:12 ETA (11/56): perl-ExtUtils-Install-2.14-3.fc27.noar 448 kB/s | 45 kB 00:00 (12-13/56): libxml2- 6% [= ] 1.4 MB/s | 1.2 MB 00:12 ETA (12/56): perl-ExtUtils-Manifest-1.70-408.fc27.0 525 kB/s | 80 kB 00:00 (13-14/56): libxml2- 7% [=- ] 1.4 MB/s | 1.4 MB 00:11 ETA (13/56): perl-ExtUtils-ParseXS-3.35-1.fc27.noar 532 kB/s | 81 kB 00:00 (14-15/56): libxml2- 8% [=- ] 1.4 MB/s | 1.5 MB 00:11 ETA (14/56): perl-File-Path-2.15-1.fc27.noarch.rpm 334 kB/s | 37 kB 00:00 (15-16/56): libxml2- 8% [=- ] 1.4 MB/s | 1.5 MB 00:12 ETA (15/56): perl-Getopt-Long-2.50-3.fc27.noarch.rp 496 kB/s | 61 kB 00:00 (16-17/56): libxml2- 9% [=- ] 1.4 MB/s | 1.7 MB 00:11 ETA (16/56): perl-podlators-4.09-408.fc27.0.riscv64 828 kB/s | 157 kB 00:00 (17-18/56): perl-Tes 11% [== ] 1.4 MB/s | 2.1 MB 00:11 ETA (17/56): perl-Test-Harness-3.39-4.fc27.noarch.r 650 kB/s | 276 kB 00:00 (18-19/56): perl-ver 12% [==- ] 1.4 MB/s | 2.3 MB 00:11 ETA (18/56): perl-version-0.99.18-5.fc28.riscv64.rp 503 kB/s | 99 kB 00:00 (19-20/56): perl-Dat 13% [==- ] 1.4 MB/s | 2.4 MB 00:11 ETA (19/56): perl-Data-Dumper-2.167-408.fc27.0.risc 644 kB/s | 149 kB 00:00 (20-21/56): perl-Enc 15% [=== ] 1.4 MB/s | 2.8 MB 00:10 ETA (20/56): libxml2-devel-2.9.3-4.fc28.riscv64.rpm 518 kB/s | 1.1 MB 00:02 (21-22/56): perl-IO- 16% [=== ] 1.4 MB/s | 3.1 MB 00:10 ETA (21/56): perl-IO-1.38-408.fc28.1.riscv64.riscv6 477 kB/s | 176 kB 00:00 (22-23/56): perl-Pat 18% [===- ] 1.4 MB/s | 3.3 MB 00:10 ETA (22/56): perl-PathTools-3.67-408.fc27.0.riscv64 641 kB/s | 166 kB 00:00 (23-24/56): perl-Enc 19% [===- ] 1.4 MB/s | 3.6 MB 00:10 ETA (23-25/56): perl-dev 24% [====- ] 1.5 MB/s | 4.4 MB 00:09 ETA (23/56): perl-devel-5.26.1-408.fc28.1.riscv64.r 805 kB/s | 593 kB 00:00 (24-25/56): perl-Enc 28% [=====- ] 1.6 MB/s | 5.1 MB 00:08 ETA (24-26/56): perl-int 32% [====== ] 1.6 MB/s | 5.9 MB 00:07 ETA (24/56): perl-Encode-2.94-16.fc27.riscv64.rpm 711 kB/s | 1.4 MB 00:02 (25-26/56): perl-int 36% [======= ] 1.6 MB/s | 6.7 MB 00:06 ETA (25/56): perl-Errno-1.28-408.fc28.1.riscv64.ris 701 kB/s | 73 kB 00:00 (26-27/56): perl-int 38% [=======- ] 1.6 MB/s | 6.9 MB 00:06 ETA (26/56): perl-constant-1.33-408.fc27.0.riscv64. 755 kB/s | 79 kB 00:00 (27-28/56): perl-int 39% [=======- ] 1.6 MB/s | 7.2 MB 00:06 ETA (27/56): perl-Text-Tabs+Wrap-2013.0523-408.fc27 838 kB/s | 80 kB 00:00 (28-29/56): perl-int 40% [======== ] 1.7 MB/s | 7.4 MB 00:06 ETA (28/56): perl-parent-0.236-408.fc27.0.riscv64.n 686 kB/s | 71 kB 00:00 (29-30/56): perl-lib 42% [======== ] 1.7 MB/s | 7.6 MB 00:06 ETA (29/56): perl-Scalar-List-Utils-1.48-1.fc27.ris 774 kB/s | 119 kB 00:00 (30-31/56): perl-lib 44% [========- ] 1.7 MB/s | 8.0 MB 00:06 ETA (30/56): perl-Unicode-Normalize-1.25-408.fc27.0 830 kB/s | 164 kB 00:00 (31-32/56): perl-lib 46% [========= ] 1.7 MB/s | 8.5 MB 00:05 ETA (31/56): perl-macros-5.26.1-408.fc28.1.riscv64. 689 kB/s | 69 kB 00:00 (32-33/56): perl-lib 48% [=========- ] 1.7 MB/s | 8.7 MB 00:05 ETA (32/56): perl-threads-2.21-1.fc27.riscv64.rpm 769 kB/s | 104 kB 00:00 (33-34/56): perl-lib 49% [=========- ] 1.7 MB/s | 9.1 MB 00:05 ETA (33/56): perl-threads-shared-1.58-1.fc27.riscv6 825 kB/s | 91 kB 00:00 (34-35/56): perl-lib 51% [========== ] 1.7 MB/s | 9.3 MB 00:05 ETA (34/56): perl-Text-ParseWords-3.30-408.fc27.0.r 745 kB/s | 73 kB 00:00 (35-36/56): perl-lib 52% [==========- ] 1.7 MB/s | 9.6 MB 00:05 ETA (35/56): perl-Socket-2.027-1.fc27.riscv64.rpm 797 kB/s | 95 kB 00:00 (36-37/56): perl-int 54% [==========- ] 1.7 MB/s | 9.8 MB 00:04 ETA (36/56): perl-MIME-Base64-3.15-408.fc27.0.riscv 808 kB/s | 111 kB 00:00 (37-38/56): perl-int 55% [=========== ] 1.7 MB/s | 10 MB 00:04 ETA (37/56): perl-Storable-2.62-408.fc27.0.riscv64. 841 kB/s | 205 kB 00:00 (38-39/56): perl-int 59% [===========- ] 1.8 MB/s | 11 MB 00:04 ETA (38-40/56): perl-int 63% [============- ] 1.8 MB/s | 12 MB 00:03 ETA (38/56): perl-Pod-Simple-3.35-408.fc27.0.riscv6 845 kB/s | 271 kB 00:00 (39-40/56): perl-int 63% [============- ] 1.8 MB/s | 12 MB 00:03 ETA (39/56): perl-Pod-Usage-1.69-408.fc27.0.riscv64 752 kB/s | 89 kB 00:00 (40-41/56): perl-lib 65% [============= ] 1.8 MB/s | 12 MB 00:03 ETA (40/56): perl-Term-ANSIColor-4.06-408.fc27.0.ri 788 kB/s | 94 kB 00:00 (41-42/56): perl-lib 66% [============= ] 1.8 MB/s | 12 MB 00:03 ETA (41/56): perl-Term-Cap-1.17-408.fc27.0.riscv64. 772 kB/s | 78 kB 00:00 (42-43/56): perl-lib 67% [=============- ] 1.8 MB/s | 12 MB 00:03 ETA (42/56): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 780 kB/s | 139 kB 00:00 (43-44/56): perl-lib 70% [============== ] 1.8 MB/s | 13 MB 00:02 ETA (43/56): perl-Pod-Escapes-1.07-408.fc27.0.riscv 778 kB/s | 77 kB 00:00 (44-45/56): perl-lib 71% [============== ] 1.8 MB/s | 13 MB 00:02 ETA (44/56): perl-File-Temp-0.230.400-408.fc27.0.ri 791 kB/s | 103 kB 00:00 (45-46/56): perl-lib 73% [==============- ] 1.8 MB/s | 13 MB 00:02 ETA (45/56): perl-libs-5.26.1-408.fc28.1.riscv64.ri 662 kB/s | 3.3 MB 00:05 (46-47/56): perl-HTT 73% [==============- ] 1.7 MB/s | 13 MB 00:02 ETA (46/56): perl-Time-Local-1.250-394.fc27.noarch. 661 kB/s | 30 kB 00:00 (47-48/56): perl-HTT 73% [==============- ] 1.7 MB/s | 13 MB 00:02 ETA (47/56): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 163 kB/s | 97 kB 00:00 (48-49/56): perl-Tim 74% [==============- ] 1.7 MB/s | 14 MB 00:02 ETA (48/56): perl-Time-HiRes-1.9753-1.fc28.riscv64. 587 kB/s | 93 kB 00:00 (49-50/56): perl-Enc 75% [=============== ] 1.7 MB/s | 14 MB 00:02 ETA (49/56): perl-Encode-Locale-1.05-8.fc27.noarch. 260 kB/s | 20 kB 00:00 (50/56): perl-interp 75% [=============== ] 1.7 MB/s | 14 MB 00:02 ETA (50/56): perl-CPAN-Meta-Requirements-2.140-408. 831 kB/s | 79 kB 00:00 (51-52/56): perl-CPA 76% [=============== ] 1.7 MB/s | 14 MB 00:02 ETA (51/56): perl-CPAN-Meta-YAML-0.018-408.fc27.0.r 802 kB/s | 77 kB 00:00 (52-53/56): perl-CPA 77% [===============- ] 1.7 MB/s | 14 MB 00:02 ETA (52/56): perl-CPAN-Meta-2.150010-408.fc27.0.ris 570 kB/s | 189 kB 00:00 (53-54/56): perl-JSO 78% [===============- ] 1.7 MB/s | 14 MB 00:02 ETA (53/56): perl-JSON-PP-2.94-4.fc27.noarch.rpm 368 kB/s | 65 kB 00:00 (54-55/56): perl-int 79% [===============- ] 1.6 MB/s | 14 MB 00:02 ETA (54/56): perl-Math-Complex-1.59-408.fc28.1.risc 766 kB/s | 105 kB 00:00 (55-56/56): perl-int 80% [================ ] 1.7 MB/s | 15 MB 00:02 ETA (55/56): perl-Math-BigInt-1.9998.11-4.fc27.noar 631 kB/s | 194 kB 00:00 (56/56): perl-interp 81% [================ ] 1.6 MB/s | 15 MB 00:02 ETA (56/56): perl-interp 85% [================= ] 1.7 MB/s | 16 MB 00:01 ETA (56/56): perl-interp 90% [================== ] 1.8 MB/s | 16 MB 00:00 ETA (56/56): perl-interp 94% [==================- ] 1.8 MB/s | 17 MB 00:00 ETA (56/56): perl-interp 99% [===================-] 1.9 MB/s | 18 MB 00:00 ETA (56/56): perl-interpreter-5.26.1-408.fc28.1.ris 915 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.6 MB/s | 18 MB 00:11 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/56 Installing : perl-Exporter-5.72-408.f [===== ] 1/56 Installing : perl-Exporter-5.72-408.f [======= ] 1/56 Installing : perl-Exporter-5.72-408.f [==================== ] 1/56 Installing : perl-Exporter-5.72-408.f [======================== ] 1/56 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/56 Installing : perl-libs-4:5.26.1-408.f [ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/56 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/56 Installing : perl-Carp-1.42-408.fc27. [ ] 3/56 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/56 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/56 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/56 Installing : perl-Scalar-List-Utils-3 [ ] 4/56 Installing : perl-Scalar-List-Utils-3 [= ] 4/56 Installing : perl-Scalar-List-Utils-3 [== ] 4/56 Installing : perl-Scalar-List-Utils-3 [=== ] 4/56 Installing : perl-Scalar-List-Utils-3 [===== ] 4/56 Installing : perl-Scalar-List-Utils-3 [======== ] 4/56 Installing : perl-Scalar-List-Utils-3 [========== ] 4/56 Installing : perl-Scalar-List-Utils-3 [============= ] 4/56 Installing : perl-Scalar-List-Utils-3 [================ ] 4/56 Installing : perl-Scalar-List-Utils-3 [================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/56 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/56 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/56 Installing : perl-Text-ParseWords-3.3 [ ] 5/56 Installing : perl-Text-ParseWords-3.3 [======= ] 5/56 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/56 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/56 Installing : perl-Term-ANSIColor-4.06 [ ] 6/56 Installing : perl-Term-ANSIColor-4.06 [==== ] 6/56 Installing : perl-Term-ANSIColor-4.06 [================== ] 6/56 Installing : perl-Term-ANSIColor-4.06 [======================== ] 6/56 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 6/56 Installing : perl-CPAN-Meta-Requireme [ ] 7/56 Installing : perl-CPAN-Meta-Requireme [=== ] 7/56 Installing : perl-CPAN-Meta-Requireme [======================== ] 7/56 Installing : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.riscv 7/56 Installing : perl-macros-4:5.26.1-408 [ ] 8/56 Installing : perl-macros-4:5.26.1-408 [======================== ] 8/56 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 8/56 Installing : perl-Errno-1.28-408.fc28 [ ] 9/56 Installing : perl-Errno-1.28-408.fc28 [================= ] 9/56 Installing : perl-Errno-1.28-408.fc28 [======================== ] 9/56 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 9/56 Installing : perl-File-Path-2.15-1.fc [ ] 10/56 Installing : perl-File-Path-2.15-1.fc [==== ] 10/56 Installing : perl-File-Path-2.15-1.fc [======== ] 10/56 Installing : perl-File-Path-2.15-1.fc [==================== ] 10/56 Installing : perl-File-Path-2.15-1.fc [======================== ] 10/56 Installing : perl-File-Path-2.15-1.fc27.noarch 10/56 Installing : perl-PathTools-3.67-408. [ ] 11/56 Installing : perl-PathTools-3.67-408. [== ] 11/56 Installing : perl-PathTools-3.67-408. [=== ] 11/56 Installing : perl-PathTools-3.67-408. [==== ] 11/56 Installing : perl-PathTools-3.67-408. [======= ] 11/56 Installing : perl-PathTools-3.67-408. [========= ] 11/56 Installing : perl-PathTools-3.67-408. [=========== ] 11/56 Installing : perl-PathTools-3.67-408. [============== ] 11/56 Installing : perl-PathTools-3.67-408. [================== ] 11/56 Installing : perl-PathTools-3.67-408. [==================== ] 11/56 Installing : perl-PathTools-3.67-408. [===================== ] 11/56 Installing : perl-PathTools-3.67-408. [====================== ] 11/56 Installing : perl-PathTools-3.67-408. [======================= ] 11/56 Installing : perl-PathTools-3.67-408. [======================== ] 11/56 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/56 Installing : perl-constant-1.33-408.f [ ] 12/56 Installing : perl-constant-1.33-408.f [======= ] 12/56 Installing : perl-constant-1.33-408.f [======================== ] 12/56 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 12/56 Installing : perl-Text-Tabs+Wrap-2013 [ ] 13/56 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 13/56 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 13/56 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 13/56 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 13/56 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 13/56 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 13/56 Installing : perl-parent-1:0.236-408. [ ] 14/56 Installing : perl-parent-1:0.236-408. [============ ] 14/56 Installing : perl-parent-1:0.236-408. [======================== ] 14/56 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 14/56 Installing : perl-Unicode-Normalize-1 [ ] 15/56 Installing : perl-Unicode-Normalize-1 [= ] 15/56 Installing : perl-Unicode-Normalize-1 [== ] 15/56 Installing : perl-Unicode-Normalize-1 [=== ] 15/56 Installing : perl-Unicode-Normalize-1 [==== ] 15/56 Installing : perl-Unicode-Normalize-1 [===== ] 15/56 Installing : perl-Unicode-Normalize-1 [====== ] 15/56 Installing : perl-Unicode-Normalize-1 [======= ] 15/56 Installing : perl-Unicode-Normalize-1 [======== ] 15/56 Installing : perl-Unicode-Normalize-1 [========= ] 15/56 Installing : perl-Unicode-Normalize-1 [========== ] 15/56 Installing : perl-Unicode-Normalize-1 [============ ] 15/56 Installing : perl-Unicode-Normalize-1 [============= ] 15/56 Installing : perl-Unicode-Normalize-1 [============== ] 15/56 Installing : perl-Unicode-Normalize-1 [=============== ] 15/56 Installing : perl-Unicode-Normalize-1 [================ ] 15/56 Installing : perl-Unicode-Normalize-1 [================= ] 15/56 Installing : perl-Unicode-Normalize-1 [================== ] 15/56 Installing : perl-Unicode-Normalize-1 [=================== ] 15/56 Installing : perl-Unicode-Normalize-1 [==================== ] 15/56 Installing : perl-Unicode-Normalize-1 [===================== ] 15/56 Installing : perl-Unicode-Normalize-1 [====================== ] 15/56 Installing : perl-Unicode-Normalize-1 [======================= ] 15/56 Installing : perl-Unicode-Normalize-1 [======================== ] 15/56 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 15/56 Installing : perl-threads-shared-1.58 [ ] 16/56 Installing : perl-threads-shared-1.58 [=== ] 16/56 Installing : perl-threads-shared-1.58 [======= ] 16/56 Installing : perl-threads-shared-1.58 [========== ] 16/56 Installing : perl-threads-shared-1.58 [============== ] 16/56 Installing : perl-threads-shared-1.58 [================= ] 16/56 Installing : perl-threads-shared-1.58 [==================== ] 16/56 Installing : perl-threads-shared-1.58 [======================= ] 16/56 Installing : perl-threads-shared-1.58 [======================== ] 16/56 Installing : perl-threads-shared-1.58-1.fc27.riscv64 16/56 Installing : perl-threads-1:2.21-1.fc [ ] 17/56 Installing : perl-threads-1:2.21-1.fc [=== ] 17/56 Installing : perl-threads-1:2.21-1.fc [====== ] 17/56 Installing : perl-threads-1:2.21-1.fc [========= ] 17/56 Installing : perl-threads-1:2.21-1.fc [============= ] 17/56 Installing : perl-threads-1:2.21-1.fc [================ ] 17/56 Installing : perl-threads-1:2.21-1.fc [================== ] 17/56 Installing : perl-threads-1:2.21-1.fc [===================== ] 17/56 Installing : perl-threads-1:2.21-1.fc [====================== ] 17/56 Installing : perl-threads-1:2.21-1.fc [======================= ] 17/56 Installing : perl-threads-1:2.21-1.fc [======================== ] 17/56 Installing : perl-threads-1:2.21-1.fc27.riscv64 17/56 Installing : perl-interpreter-4:5.26. [ ] 18/56random: crng init done Installing : perl-interpreter-4:5.26. [= ] 18/56 Installing : perl-interpreter-4:5.26. [== ] 18/56 Installing : perl-interpreter-4:5.26. [=== ] 18/56 Installing : perl-interpreter-4:5.26. [==== ] 18/56 Installing : perl-interpreter-4:5.26. [===== ] 18/56 Installing : perl-interpreter-4:5.26. [====== ] 18/56 Installing : perl-interpreter-4:5.26. [======= ] 18/56 Installing : perl-interpreter-4:5.26. [======== ] 18/56 Installing : perl-interpreter-4:5.26. [========= ] 18/56 Installing : perl-interpreter-4:5.26. [========== ] 18/56 Installing : perl-interpreter-4:5.26. [=========== ] 18/56 Installing : perl-interpreter-4:5.26. [============ ] 18/56 Installing : perl-interpreter-4:5.26. [============= ] 18/56 Installing : perl-interpreter-4:5.26. [============== ] 18/56 Installing : perl-interpreter-4:5.26. [=============== ] 18/56 Installing : perl-interpreter-4:5.26. [================ ] 18/56 Installing : perl-interpreter-4:5.26. [================= ] 18/56 Installing : perl-interpreter-4:5.26. [================== ] 18/56 Installing : perl-interpreter-4:5.26. [=================== ] 18/56 Installing : perl-interpreter-4:5.26. [==================== ] 18/56 Installing : perl-interpreter-4:5.26. [===================== ] 18/56 Installing : perl-interpreter-4:5.26. [====================== ] 18/56 Installing : perl-interpreter-4:5.26. [======================= ] 18/56 Installing : perl-interpreter-4:5.26. [======================== ] 18/56 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 18/56 Installing : perl-Socket-4:2.027-1.fc [ ] 19/56 Installing : perl-Socket-4:2.027-1.fc [=== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [======= ] 19/56 Installing : perl-Socket-4:2.027-1.fc [========== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [============== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [================= ] 19/56 Installing : perl-Socket-4:2.027-1.fc [==================== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [===================== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [====================== ] 19/56 Installing : perl-Socket-4:2.027-1.fc [======================= ] 19/56 Installing : perl-Socket-4:2.027-1.fc [======================== ] 19/56 Installing : perl-Socket-4:2.027-1.fc27.riscv64 19/56 Installing : perl-IO-1.38-408.fc28.1. [ ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [= ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [=== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [==== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [===== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [====== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [======= ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [======== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [============== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [================= ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 20/56 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 20/56 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 20/56 Installing : perl-Data-Dumper-2.167-4 [ ] 21/56 Installing : perl-Data-Dumper-2.167-4 [=== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [==== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [======== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [============ ] 21/56 Installing : perl-Data-Dumper-2.167-4 [=============== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [=================== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [====================== ] 21/56 Installing : perl-Data-Dumper-2.167-4 [======================= ] 21/56 Installing : perl-Data-Dumper-2.167-4 [======================== ] 21/56 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 21/56 Installing : perl-Storable-1:2.62-408 [ ] 22/56 Installing : perl-Storable-1:2.62-408 [== ] 22/56 Installing : perl-Storable-1:2.62-408 [==== ] 22/56 Installing : perl-Storable-1:2.62-408 [====== ] 22/56 Installing : perl-Storable-1:2.62-408 [======== ] 22/56 Installing : perl-Storable-1:2.62-408 [========== ] 22/56 Installing : perl-Storable-1:2.62-408 [============ ] 22/56 Installing : perl-Storable-1:2.62-408 [============== ] 22/56 Installing : perl-Storable-1:2.62-408 [================ ] 22/56 Installing : perl-Storable-1:2.62-408 [================== ] 22/56 Installing : perl-Storable-1:2.62-408 [==================== ] 22/56 Installing : perl-Storable-1:2.62-408 [====================== ] 22/56 Installing : perl-Storable-1:2.62-408 [======================== ] 22/56 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 22/56 Installing : perl-File-Temp-0.230.400 [ ] 23/56 Installing : perl-File-Temp-0.230.400 [=== ] 23/56 Installing : perl-File-Temp-0.230.400 [============ ] 23/56 Installing : perl-File-Temp-0.230.400 [===================== ] 23/56 Installing : perl-File-Temp-0.230.400 [======================== ] 23/56 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 23/56 Installing : perl-ExtUtils-Command-1: [ ] 24/56 Installing : perl-ExtUtils-Command-1: [===== ] 24/56 Installing : perl-ExtUtils-Command-1: [====== ] 24/56 Installing : perl-ExtUtils-Command-1: [======================== ] 24/56 Installing : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 24/56 Installing : perl-ExtUtils-Manifest-1 [ ] 25/56 Installing : perl-ExtUtils-Manifest-1 [==== ] 25/56 Installing : perl-ExtUtils-Manifest-1 [===== ] 25/56 Installing : perl-ExtUtils-Manifest-1 [======================== ] 25/56 Installing : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.noa 25/56 Installing : perl-version-6:0.99.18-5 [ ] 26/56 Installing : perl-version-6:0.99.18-5 [=== ] 26/56 Installing : perl-version-6:0.99.18-5 [======= ] 26/56 Installing : perl-version-6:0.99.18-5 [========== ] 26/56 Installing : perl-version-6:0.99.18-5 [============== ] 26/56 Installing : perl-version-6:0.99.18-5 [=============== ] 26/56 Installing : perl-version-6:0.99.18-5 [================== ] 26/56 Installing : perl-version-6:0.99.18-5 [=================== ] 26/56 Installing : perl-version-6:0.99.18-5 [===================== ] 26/56 Installing : perl-version-6:0.99.18-5 [======================= ] 26/56 Installing : perl-version-6:0.99.18-5 [======================== ] 26/56 Installing : perl-version-6:0.99.18-5.fc28.riscv64 26/56 Installing : perl-MIME-Base64-3.15-40 [ ] 27/56 Installing : perl-MIME-Base64-3.15-40 [= ] 27/56 Installing : perl-MIME-Base64-3.15-40 [== ] 27/56 Installing : perl-MIME-Base64-3.15-40 [========== ] 27/56 Installing : perl-MIME-Base64-3.15-40 [================== ] 27/56 Installing : perl-MIME-Base64-3.15-40 [======================= ] 27/56 Installing : perl-MIME-Base64-3.15-40 [======================== ] 27/56 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 27/56 Installing : perl-Term-Cap-1.17-408.f [ ] 28/56 Installing : perl-Term-Cap-1.17-408.f [==== ] 28/56 Installing : perl-Term-Cap-1.17-408.f [======================== ] 28/56 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 28/56 Installing : perl-Pod-Escapes-1:1.07- [ ] 29/56 Installing : perl-Pod-Escapes-1:1.07- [==== ] 29/56 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 29/56 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/56 Installing : perl-CPAN-Meta-YAML-0.01 [ ] 30/56 Installing : perl-CPAN-Meta-YAML-0.01 [== ] 30/56 Installing : perl-CPAN-Meta-YAML-0.01 [======================== ] 30/56 Installing : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noarc 30/56 Installing : perl-Math-Complex-1.59-4 [ ] 31/56 Installing : perl-Math-Complex-1.59-4 [== ] 31/56 Installing : perl-Math-Complex-1.59-4 [==== ] 31/56 Installing : perl-Math-Complex-1.59-4 [============== ] 31/56 Installing : perl-Math-Complex-1.59-4 [================== ] 31/56 Installing : perl-Math-Complex-1.59-4 [======================== ] 31/56 Installing : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 31/56 Installing : perl-Math-BigInt-1:1.999 [ ] 32/56 Installing : perl-Math-BigInt-1:1.999 [= ] 32/56 Installing : perl-Math-BigInt-1:1.999 [== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [=== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [==== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [===== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [====== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [======== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [========= ] 32/56 Installing : perl-Math-BigInt-1:1.999 [========== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [=========== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [============ ] 32/56 Installing : perl-Math-BigInt-1:1.999 [============= ] 32/56 Installing : perl-Math-BigInt-1:1.999 [============== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [=============== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [================= ] 32/56 Installing : perl-Math-BigInt-1:1.999 [================== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [=================== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [===================== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [====================== ] 32/56 Installing : perl-Math-BigInt-1:1.999 [======================== ] 32/56 Installing : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 32/56 Installing : perl-Time-Local-1:1.250- [ ] 33/56 Installing : perl-Time-Local-1:1.250- [= ] 33/56 Installing : perl-Time-Local-1:1.250- [===== ] 33/56 Installing : perl-Time-Local-1:1.250- [======== ] 33/56 Installing : perl-Time-Local-1:1.250- [========= ] 33/56 Installing : perl-Time-Local-1:1.250- [================= ] 33/56 Installing : perl-Time-Local-1:1.250- [=================== ] 33/56 Installing : perl-Time-Local-1:1.250- [======================== ] 33/56 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 33/56 Installing : perl-HTTP-Tiny-0.070-408 [ ] 34/56 Installing : perl-HTTP-Tiny-0.070-408 [== ] 34/56 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 34/56 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 34/56 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 34/56 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 34/56 Installing : perl-Encode-4:2.94-16.fc [ ] 35/56 Installing : perl-Encode-4:2.94-16.fc [= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [=== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [==== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [===== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [====== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [======= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [======== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [========= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [========== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [=========== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [============ ] 35/56 Installing : perl-Encode-4:2.94-16.fc [============= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [============== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [=============== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [================ ] 35/56 Installing : perl-Encode-4:2.94-16.fc [================= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [=================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [==================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [===================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [====================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc [======================= ] 35/56 Installing : perl-Encode-4:2.94-16.fc [======================== ] 35/56 Installing : perl-Encode-4:2.94-16.fc27.riscv64 35/56 Installing : perl-Pod-Simple-1:3.35-4 [ ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 36/56 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 36/56 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 36/56 Installing : perl-Getopt-Long-1:2.50- [ ] 37/56 Installing : perl-Getopt-Long-1:2.50- [=== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [==== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [===== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [====== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [======= ] 37/56 Installing : perl-Getopt-Long-1:2.50- [========= ] 37/56 Installing : perl-Getopt-Long-1:2.50- [=============== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [===================== ] 37/56 Installing : perl-Getopt-Long-1:2.50- [======================== ] 37/56 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 37/56 Installing : perl-podlators-4.09-408. [ ] 38/56 Installing : perl-podlators-4.09-408. [= ] 38/56 Installing : perl-podlators-4.09-408. [== ] 38/56 Installing : perl-podlators-4.09-408. [=== ] 38/56 Installing : perl-podlators-4.09-408. [==== ] 38/56 Installing : perl-podlators-4.09-408. [===== ] 38/56 Installing : perl-podlators-4.09-408. [====== ] 38/56 Installing : perl-podlators-4.09-408. [======= ] 38/56 Installing : perl-podlators-4.09-408. [=========== ] 38/56 Installing : perl-podlators-4.09-408. [=============== ] 38/56 Installing : perl-podlators-4.09-408. [================ ] 38/56 Installing : perl-podlators-4.09-408. [================= ] 38/56 Installing : perl-podlators-4.09-408. [===================== ] 38/56 Installing : perl-podlators-4.09-408. [====================== ] 38/56 Installing : perl-podlators-4.09-408. [======================= ] 38/56 Installing : perl-podlators-4.09-408. [======================== ] 38/56 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 38/56 Installing : perl-Pod-Perldoc-3.28-40 [ ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [= ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 39/56 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 39/56 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 39/56 Installing : perl-Pod-Usage-4:1.69-40 [ ] 40/56 Installing : perl-Pod-Usage-4:1.69-40 [== ] 40/56 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 40/56 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 40/56 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 40/56 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 40/56 Installing : perl-ExtUtils-ParseXS-1: [ ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [=== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [==== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [===== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [====== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [======= ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [=========== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [=============== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [================ ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [================= ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [=================== ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [======================= ] 41/56 Installing : perl-ExtUtils-ParseXS-1: [======================== ] 41/56 Installing : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 41/56 Installing : perl-Test-Harness-1:3.39 [ ] 42/56 Installing : perl-Test-Harness-1:3.39 [= ] 42/56 Installing : perl-Test-Harness-1:3.39 [== ] 42/56 Installing : perl-Test-Harness-1:3.39 [=== ] 42/56 Installing : perl-Test-Harness-1:3.39 [==== ] 42/56 Installing : perl-Test-Harness-1:3.39 [===== ] 42/56 Installing : perl-Test-Harness-1:3.39 [====== ] 42/56 Installing : perl-Test-Harness-1:3.39 [======= ] 42/56 Installing : perl-Test-Harness-1:3.39 [======== ] 42/56 Installing : perl-Test-Harness-1:3.39 [========= ] 42/56 Installing : perl-Test-Harness-1:3.39 [========== ] 42/56 Installing : perl-Test-Harness-1:3.39 [=========== ] 42/56 Installing : perl-Test-Harness-1:3.39 [============ ] 42/56 Installing : perl-Test-Harness-1:3.39 [============= ] 42/56 Installing : perl-Test-Harness-1:3.39 [============== ] 42/56 Installing : perl-Test-Harness-1:3.39 [=============== ] 42/56 Installing : perl-Test-Harness-1:3.39 [================= ] 42/56 Installing : perl-Test-Harness-1:3.39 [================== ] 42/56 Installing : perl-Test-Harness-1:3.39 [=================== ] 42/56 Installing : perl-Test-Harness-1:3.39 [==================== ] 42/56 Installing : perl-Test-Harness-1:3.39 [===================== ] 42/56 Installing : perl-Test-Harness-1:3.39 [====================== ] 42/56 Installing : perl-Test-Harness-1:3.39 [======================= ] 42/56 Installing : perl-Test-Harness-1:3.39 [======================== ] 42/56 Installing : perl-Test-Harness-1:3.39-4.fc27.noarch 42/56 Installing : perl-devel-4:5.26.1-408. [ ] 43/56 Installing : perl-devel-4:5.26.1-408. [= ] 43/56 Installing : perl-devel-4:5.26.1-408. [== ] 43/56 Installing : perl-devel-4:5.26.1-408. [=== ] 43/56 Installing : perl-devel-4:5.26.1-408. [==== ] 43/56 Installing : perl-devel-4:5.26.1-408. [===== ] 43/56 Installing : perl-devel-4:5.26.1-408. [====== ] 43/56 Installing : perl-devel-4:5.26.1-408. [======= ] 43/56 Installing : perl-devel-4:5.26.1-408. [======== ] 43/56 Installing : perl-devel-4:5.26.1-408. [========= ] 43/56 Installing : perl-devel-4:5.26.1-408. [========== ] 43/56 Installing : perl-devel-4:5.26.1-408. [=========== ] 43/56 Installing : perl-devel-4:5.26.1-408. [============ ] 43/56 Installing : perl-devel-4:5.26.1-408. [============= ] 43/56 Installing : perl-devel-4:5.26.1-408. [============== ] 43/56 Installing : perl-devel-4:5.26.1-408. [=============== ] 43/56 Installing : perl-devel-4:5.26.1-408. [================ ] 43/56 Installing : perl-devel-4:5.26.1-408. [================= ] 43/56 Installing : perl-devel-4:5.26.1-408. [================== ] 43/56 Installing : perl-devel-4:5.26.1-408. [=================== ] 43/56 Installing : perl-devel-4:5.26.1-408. [==================== ] 43/56 Installing : perl-devel-4:5.26.1-408. [===================== ] 43/56 Installing : perl-devel-4:5.26.1-408. [====================== ] 43/56 Installing : perl-devel-4:5.26.1-408. [======================= ] 43/56 Installing : perl-devel-4:5.26.1-408. [======================== ] 43/56 Installing : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 43/56 Installing : perl-ExtUtils-Install-2. [ ] 44/56 Installing : perl-ExtUtils-Install-2. [=== ] 44/56 Installing : perl-ExtUtils-Install-2. [===== ] 44/56 Installing : perl-ExtUtils-Install-2. [====== ] 44/56 Installing : perl-ExtUtils-Install-2. [================ ] 44/56 Installing : perl-ExtUtils-Install-2. [================== ] 44/56 Installing : perl-ExtUtils-Install-2. [====================== ] 44/56 Installing : perl-ExtUtils-Install-2. [======================== ] 44/56 Installing : perl-ExtUtils-Install-2.14-3.fc27.noarch 44/56 Installing : perl-ExtUtils-MakeMaker- [ ] 45/56 Installing : perl-ExtUtils-MakeMaker- [= ] 45/56 Installing : perl-ExtUtils-MakeMaker- [== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [=== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [==== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [===== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [====== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [======= ] 45/56 Installing : perl-ExtUtils-MakeMaker- [======== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [========= ] 45/56 Installing : perl-ExtUtils-MakeMaker- [========== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [=========== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [============ ] 45/56 Installing : perl-ExtUtils-MakeMaker- [============= ] 45/56 Installing : perl-ExtUtils-MakeMaker- [============== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [=============== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [================ ] 45/56 Installing : perl-ExtUtils-MakeMaker- [================== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [=================== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [==================== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [====================== ] 45/56 Installing : perl-ExtUtils-MakeMaker- [======================= ] 45/56 Installing : perl-ExtUtils-MakeMaker- [======================== ] 45/56 Installing : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 45/56 Installing : perl-JSON-PP-1:2.94-4.fc [ ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc [=== ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc [======= ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc [============= ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc [==================== ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc [======================== ] 46/56 Installing : perl-JSON-PP-1:2.94-4.fc27.noarch 46/56 Installing : libpkgconf-1.4.1-1.fc27. [ ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 47/56 Installing : libpkgconf-1.4.1-1.fc27.riscv64 47/56 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 47/56 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 48/56 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 48/56 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 48/56 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 48/56 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 48/56 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 48/56 Installing : pkgconf-1.4.1-1.fc27.riscv64 48/56 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 49/56 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 49/56 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 49/56 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 49/56 Installing : pkgconf-pkg-config-1.4.1 [ ] 50/56 Installing : pkgconf-pkg-config-1.4.1 [==== ] 50/56 Installing : pkgconf-pkg-config-1.4.1 [===== ] 50/56 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 50/56 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 50/56 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 50/56 Installing : zlib-devel-1.2.11-4.fc28 [ ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [== ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [======== ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [============= ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [=================== ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [==================== ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [======================= ] 51/56 Installing : zlib-devel-1.2.11-4.fc28 [======================== ] 51/56 Installing : zlib-devel-1.2.11-4.fc28.riscv64 51/56 Installing : xz-devel-5.2.3-5.fc28.ri [ ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [= ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [==== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [======= ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [========== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [============ ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [============= ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [=============== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [================ ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [=================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [==================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [===================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [====================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [======================= ] 52/56 Installing : xz-devel-5.2.3-5.fc28.ri [======================== ] 52/56 Installing : xz-devel-5.2.3-5.fc28.riscv64 52/56 Installing : libxml2-devel-2.9.3-4.fc [ ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [=== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [==== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [===== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [====== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [======= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [======== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [========= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [========== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [=========== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [============ ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [============= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [============== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [=============== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [================ ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [================= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [=================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [==================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [===================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [====================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [======================= ] 53/56 Installing : libxml2-devel-2.9.3-4.fc [======================== ] 53/56 Installing : libxml2-devel-2.9.3-4.fc28.riscv64 53/56 Installing : perl-CPAN-Meta-2.150010- [ ] 54/56 Installing : perl-CPAN-Meta-2.150010- [= ] 54/56 Installing : perl-CPAN-Meta-2.150010- [== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [=== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [==== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [===== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [====== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [======= ] 54/56 Installing : perl-CPAN-Meta-2.150010- [========== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [============= ] 54/56 Installing : perl-CPAN-Meta-2.150010- [============== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [=============== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [================ ] 54/56 Installing : perl-CPAN-Meta-2.150010- [================= ] 54/56 Installing : perl-CPAN-Meta-2.150010- [==================== ] 54/56 Installing : perl-CPAN-Meta-2.150010- [======================= ] 54/56 Installing : perl-CPAN-Meta-2.150010- [======================== ] 54/56 Installing : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarch 54/56 Installing : perl-Encode-Locale-1.05- [ ] 55/56 Installing : perl-Encode-Locale-1.05- [=== ] 55/56 Installing : perl-Encode-Locale-1.05- [==== ] 55/56 Installing : perl-Encode-Locale-1.05- [========= ] 55/56 Installing : perl-Encode-Locale-1.05- [======================== ] 55/56 Installing : perl-Encode-Locale-1.05-8.fc27.noarch 55/56 Installing : perl-Time-HiRes-1.9753-1 [ ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [====== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [========== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [============== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [================== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [====================== ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [======================= ] 56/56 Installing : perl-Time-HiRes-1.9753-1 [======================== ] 56/56 Installing : perl-Time-HiRes-1.9753-1.fc28.riscv64 56/56 Running scriptlet: perl-Time-HiRes-1.9753-1.fc28.riscv64 56/56 Verifying : libxml2-devel-2.9.3-4.fc28.riscv64 1/56 Verifying : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 2/56 Verifying : zlib-devel-1.2.11-4.fc28.riscv64 3/56 Verifying : xz-devel-5.2.3-5.fc28.riscv64 4/56 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 5/56 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 6/56 Verifying : pkgconf-1.4.1-1.fc27.riscv64 7/56 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 8/56 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 9/56 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 10/56 Verifying : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 11/56 Verifying : perl-ExtUtils-Install-2.14-3.fc27.noarch 12/56 Verifying : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.noa 13/56 Verifying : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 14/56 Verifying : perl-File-Path-2.15-1.fc27.noarch 15/56 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 16/56 Verifying : perl-Test-Harness-1:3.39-4.fc27.noarch 17/56 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 18/56 Verifying : perl-version-6:0.99.18-5.fc28.riscv64 19/56 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 20/56 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 21/56 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 22/56 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 23/56 Verifying : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 24/56 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 25/56 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 26/56 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 27/56 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 28/56 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 29/56 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 30/56 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 31/56 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 32/56 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 33/56 Verifying : perl-threads-1:2.21-1.fc27.riscv64 34/56 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 35/56 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 36/56 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 37/56 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 38/56 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 39/56 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 40/56 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 41/56 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 42/56 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 43/56 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 44/56 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 45/56 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 46/56 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 47/56 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 48/56 Verifying : perl-Time-HiRes-1.9753-1.fc28.riscv64 49/56 Verifying : perl-Encode-Locale-1.05-8.fc27.noarch 50/56 Verifying : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarch 51/56 Verifying : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.riscv 52/56 Verifying : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noarc 53/56 Verifying : perl-JSON-PP-1:2.94-4.fc27.noarch 54/56 Verifying : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 55/56 Verifying : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 56/56 Installed: libxml2-devel.riscv64 2.9.3-4.fc28 perl-ExtUtils-MakeMaker.noarch 1:7.30-2.fc27 zlib-devel.riscv64 1.2.11-4.fc28 perl-CPAN-Meta.noarch 2.150010-408.fc27.0.riscv64 perl-CPAN-Meta-Requirements.noarch 2.140-408.fc27.0.riscv64 perl-Encode-Locale.noarch 1.05-8.fc27 perl-Time-HiRes.riscv64 1.9753-1.fc28 libpkgconf.riscv64 1.4.1-1.fc27 perl-CPAN-Meta-YAML.noarch 0.018-408.fc27.0.riscv64 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-ExtUtils-Command.noarch 1:7.30-2.fc27 perl-ExtUtils-Install.noarch 2.14-3.fc27 perl-ExtUtils-Manifest.noarch 1.70-408.fc27.0.riscv64 perl-ExtUtils-ParseXS.noarch 1:3.35-1.fc27 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-JSON-PP.noarch 1:2.94-4.fc27 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-Math-BigInt.noarch 1:1.9998.11-4.fc27 perl-Math-Complex.noarch 1.59-408.fc28.1.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Test-Harness.noarch 1:3.39-4.fc27 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-devel.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 perl-version.riscv64 6:0.99.18-5.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 xz-devel.riscv64 5.2.3-5.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:04:24 ago on Wed Feb 21 15:27:34 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:04:45 ago on Wed Feb 21 15:27:34 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group patch redhat-rpm-config cpio gawk sed tar grep fedora-release bash bzip2 info which coreutils make util-linux xz rpm-build diffutils unzip shadow-utils findutils gzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 27 Packages Total download size: 12 M Installed size: 50 M Downloading Packages: (1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/27): make-4.2.1 5% [= ] 2.3 MB/s | 703 kB 00:05 ETA (1/27): make-4.2.1-6.fc27.riscv64.rpm 846 kB/s | 486 kB 00:00 (2-3/27): tar-1.29-7 11% [== ] 2.3 MB/s | 1.4 MB 00:04 ETA (2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 835 kB/s | 75 kB 00:00 (3-4/27): tar-1.29-7 13% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA (3/27): diffutils-3.6-3.fc28.riscv64.rpm 682 kB/s | 577 kB 00:00 (4-5/27): tar-1.29-7 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA (4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 71 kB/s | 7.6 kB 00:00 (5/27): tar-1.29-7.f 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA (5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 163 kB/s | 7.8 kB 00:00 (6-7/27): tar-1.29-7 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA (6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 151 kB/s | 6.6 kB 00:00 (7/27): tar-1.29-7.f 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA (7/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 203 kB/s | 9.0 kB 00:00 (8-9/27): tar-1.29-7 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA (8/27): rust-srpm-macros-5-1.fc28.noarch.rpm 192 kB/s | 8.0 kB 00:00 (9/27): tar-1.29-7.f 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA (9/27): tar-1.29-7.fc27.riscv64.rpm 577 kB/s | 805 kB 00:01 (10-11/27): zstd-1.3 18% [===- ] 2.1 MB/s | 2.3 MB 00:04 ETA (10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 557 kB/s | 235 kB 00:00 (11-12/27): which-2. 19% [===- ] 2.1 MB/s | 2.4 MB 00:04 ETA (11/27): which-2.21-4.fc28.riscv64.rpm 377 kB/s | 65 kB 00:00 (12-13/27): patch-2. 20% [==== ] 2.1 MB/s | 2.5 MB 00:04 ETA (12/27): patch-2.7.5-6.fc27.riscv64.rpm 756 kB/s | 270 kB 00:00 (13-14/27): unzip-6. 25% [===== ] 2.1 MB/s | 3.2 MB 00:04 ETA (13/27): unzip-6.0-36.fc28.riscv64.rpm 777 kB/s | 398 kB 00:00 (14-15/27): zstd-1.3 29% [=====- ] 2.1 MB/s | 3.7 MB 00:04 ETA (14/27): xz-5.2.3-5.fc28.riscv64.rpm 669 kB/s | 212 kB 00:00 (15-16/27): zstd-1.3 31% [====== ] 2.1 MB/s | 3.9 MB 00:04 ETA (15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 484 kB/s | 81 kB 00:00 (16-17/27): zstd-1.3 31% [====== ] 2.1 MB/s | 3.9 MB 00:04 ETA (16/27): file-5.32-3.fc28.riscv64.rpm 763 kB/s | 81 kB 00:00 (17-18/27): zstd-1.3 33% [======- ] 2.1 MB/s | 4.2 MB 00:03 ETA (17-19/27): elfutils 40% [======== ] 2.1 MB/s | 5.0 MB 00:03 ETA (17/27): zstd-1.3.3-1.fc27.riscv64.rpm 634 kB/s | 1.1 MB 00:01 (18-19/27): elfutils 40% [======== ] 2.0 MB/s | 5.1 MB 00:03 ETA (18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 303 kB/s | 7.5 kB 00:00 (19-20/27): elfutils 41% [======== ] 2.0 MB/s | 5.1 MB 00:03 ETA (19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 289 kB/s | 8.2 kB 00:00 (20-21/27): elfutils 41% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA (20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 303 kB/s | 8.8 kB 00:00 (21-22/27): binutils 41% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA (21/27): go-srpm-macros-2-11.fc28.noarch.rpm 327 kB/s | 8.4 kB 00:00 (22-23/27): binutils 42% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA (22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 396 kB/s | 9.7 kB 00:00 (23-24/27): binutils 42% [======== ] 2.0 MB/s | 5.3 MB 00:03 ETA (23/27): python-srpm-macros-3-26.fc28.noarch.rp 390 kB/s | 10 kB 00:00 (24-25/27): binutils 42% [========- ] 2.0 MB/s | 5.3 MB 00:03 ETA (24/27): dwz-0.12-5.fc28.riscv64.rpm 853 kB/s | 108 kB 00:00 (25-26/27): binutils 45% [========= ] 2.0 MB/s | 5.7 MB 00:03 ETA (25/27): elfutils-0.170-4.fc28.riscv64.rpm 564 kB/s | 791 kB 00:01 (26-27/27): zip-3.0- 49% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA (26/27): zip-3.0-20.fc28.riscv64.rpm 741 kB/s | 271 kB 00:00 (27/27): binutils-2. 50% [========== ] 2.0 MB/s | 6.3 MB 00:03 ETA (27/27): binutils-2. 57% [===========- ] 2.0 MB/s | 7.2 MB 00:02 ETA (27/27): binutils-2. 64% [============- ] 2.0 MB/s | 8.0 MB 00:02 ETA (27/27): binutils-2. 70% [============== ] 2.1 MB/s | 8.8 MB 00:01 ETA (27/27): binutils-2. 77% [=============== ] 2.1 MB/s | 9.6 MB 00:01 ETA (27/27): binutils-2. 83% [================- ] 2.2 MB/s | 10 MB 00:00 ETA (27/27): binutils-2. 90% [================== ] 2.2 MB/s | 11 MB 00:00 ETA (27/27): binutils-2. 97% [=================== ] 2.2 MB/s | 12 MB 00:00 ETA (27/27): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.7 MB/s | 12 MB 00:07 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27 Installing : file-5.32-3.fc28.riscv64 1/27 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27 Installing : unzip-6.0-36.fc28.riscv64 2/27 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27 Installing : zip-3.0-20.fc28.riscv64 3/27 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27 Installing : dwz-0.12-5.fc28.riscv64 4/27 Installing : python-srpm-macros-3-26. [ ] 5/27 Installing : python-srpm-macros-3-26. [======================= ] 5/27 Installing : python-srpm-macros-3-26.fc28.noarch 5/27 Installing : perl-srpm-macros-1-26.fc [ ] 6/27 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27 Installing : perl-srpm-macros-1-26.fc28.noarch 6/27 Installing : go-srpm-macros-2-11.fc28 [ ] 7/27 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27 Installing : go-srpm-macros-2-11.fc28.noarch 7/27 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27 Installing : binutils-2.30-1.fc28.ris [ ] 11/27 Installing : binutils-2.30-1.fc28.ris [= ] 11/27 Installing : binutils-2.30-1.fc28.ris [== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======== ] 11/27 Installing : binutils-2.30-1.fc28.ris [========= ] 11/27 Installing : binutils-2.30-1.fc28.ris [========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27 Installing : binutils-2.30-1.fc28.ris [============ ] 11/27 Installing : binutils-2.30-1.fc28.ris [============= ] 11/27 Installing : binutils-2.30-1.fc28.ris [============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27 Installing : binutils-2.30-1.fc28.ris [================ ] 11/27 Installing : binutils-2.30-1.fc28.ris [================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27 Installing : binutils-2.30-1.fc28.riscv64 11/27 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27 Installing : elfutils-0.170-4.fc28.ri [ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27 Installing : elfutils-0.170-4.fc28.riscv64 12/27 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27 Installing : bzip2-1.0.6-24.fc28.riscv64 13/27 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27 Installing : xz-5.2.3-5.fc28.riscv64 14/27 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27 Installing : patch-2.7.5-6.fc27.riscv64 15/27 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27 Installing : zstd-1.3.3-1.fc27.riscv64 16/27 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27 Installing : rust-srpm-macros-5-1.fc28.noarch 17/27 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27 Installing : openblas-srpm-macros-2-2 [ ] 19/27 Installing : openblas-srpm-macros-2-2 [================ ] 19/27 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27 Installing : nim-srpm-macros-1-1.fc28.noarch 21/27 Installing : redhat-rpm-config-96-1.f [ ] 22/27 Installing : redhat-rpm-config-96-1.f [== ] 22/27 Installing : redhat-rpm-config-96-1.f [=== ] 22/27 Installing : redhat-rpm-config-96-1.f [========= ] 22/27 Installing : redhat-rpm-config-96-1.f [=========== ] 22/27 Installing : redhat-rpm-config-96-1.f [================= ] 22/27 Installing : redhat-rpm-config-96-1.f [================== ] 22/27 Installing : redhat-rpm-config-96-1.f [=================== ] 22/27 Installing : redhat-rpm-config-96-1.f [===================== ] 22/27 Installing : redhat-rpm-config-96-1.f [====================== ] 22/27 Installing : redhat-rpm-config-96-1.f [======================== ] 22/27 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27 Installing : diffutils-3.6-3.fc28.ris [ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27 Installing : diffutils-3.6-3.fc28.riscv64 23/27 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27 Installing : tar-2:1.29-7.fc27.riscv64 24/27 Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27 Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27 Installing : which-2.21-4.fc28.riscv6 [ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27 Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27 Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27 Installing : which-2.21-4.fc28.riscv64 26/27 Running scriptlet: which-2.21-4.fc28.riscv64 26/27 Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27 Installing : make-1:4.2.1-6.fc27.riscv64 27/27 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27 Verifying : tar-2:1.29-7.fc27.riscv64 1/27 Verifying : diffutils-3.6-3.fc28.riscv64 2/27 Verifying : make-1:4.2.1-6.fc27.riscv64 3/27 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27 Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27 Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27 Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27 Verifying : zstd-1.3.3-1.fc27.riscv64 11/27 Verifying : which-2.21-4.fc28.riscv64 12/27 Verifying : patch-2.7.5-6.fc27.riscv64 13/27 Verifying : unzip-6.0-36.fc28.riscv64 14/27 Verifying : xz-5.2.3-5.fc28.riscv64 15/27 Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27 Verifying : elfutils-0.170-4.fc28.riscv64 17/27 Verifying : file-5.32-3.fc28.riscv64 18/27 Verifying : binutils-2.30-1.fc28.riscv64 19/27 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27 Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27 Verifying : go-srpm-macros-2-11.fc28.noarch 23/27 Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27 Verifying : python-srpm-macros-3-26.fc28.noarch 25/27 Verifying : dwz-0.12-5.fc28.riscv64 26/27 Verifying : zip-3.0-20.fc28.riscv64 27/27 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:06:41 ago on Wed Feb 21 15:27:34 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 562 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 429 kB/s | 32 kB 00:05 ETA (2-4/4): glibc-heade 34% [======- ] 576 kB/s | 895 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 801 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 51% [========== ] 637 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 88% [=================- ] 788 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 946 kB/s | 1.0 MB 00:01 (4/4): kernel-header 96% [=================== ] 800 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 977 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off