OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 14:02:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libtevent-0.9.30-1.fc25.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libtevent.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 2.9 MB/s | 888 kB 00:03 ETA Local RPMS 14% [==- ] 2.9 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 2.9 MB/s | 2.7 MB 00:02 ETA Local RPMS 33% [======- ] 2.9 MB/s | 3.8 MB 00:02 ETA Local RPMS 42% [======== ] 3.0 MB/s | 4.8 MB 00:02 ETA Local RPMS 50% [========== ] 3.0 MB/s | 5.8 MB 00:01 ETA Local RPMS 58% [===========- ] 2.8 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [=============- ] 2.8 MB/s | 7.7 MB 00:01 ETA Local RPMS 75% [=============== ] 2.9 MB/s | 8.6 MB 00:00 ETA Local RPMS 84% [================- ] 2.9 MB/s | 9.6 MB 00:00 ETA Local RPMS 92% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:23 ago on Wed Feb 21 14:02:33 2018. sh: /usr/bin/python: No such file or directory Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: docbook-style-xsl noarch 1.79.2-6.fc28 local 1.6 M doxygen riscv64 1:1.8.12-1.fc27 local 4.0 M libtalloc-devel riscv64 2.1.8-1.fc28 local 58 k libxslt riscv64 1.1.28-13.fc28 local 506 k python-talloc-devel riscv64 2.1.8-1.fc28 local 13 k python2-devel riscv64 2.7.14-9.fc28 local 410 k python3-devel riscv64 3.6.4-14.0.fc28 local 862 k python3-talloc-devel riscv64 2.1.8-1.fc28 local 13 k Installing dependencies: docbook-dtds noarch 1.0-68.fc28 local 376 k dwz riscv64 0.12-5.fc28 local 108 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libtalloc riscv64 2.1.8-1.fc28 local 125 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python-talloc riscv64 2.1.8-1.fc28 local 34 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-rpm-macros noarch 3-26.fc28 local 10 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k python3-talloc riscv64 2.1.8-1.fc28 local 34 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k sgml-common noarch 0.6.3-47.fc28 local 59 k unzip riscv64 6.0-36.fc28 local 398 k xml-common noarch 0.6.3-47.fc28 local 30 k zip riscv64 3.0-20.fc28 local 271 k Transaction Summary ================================================================================ Install 41 Packages Total download size: 18 M Installed size: 84 M Downloading Packages: (1/41): doxygen-1.8. 0% [ ] --- B/s | 0 B --:-- ETA (1/41): python-talloc-devel-2.1.8-1.fc28.riscv6 460 kB/s | 13 kB 00:00 (2-3/41): doxygen-1. 0% [ ] 637 kB/s | 44 kB 00:29 ETA (2/41): python3-talloc-devel-2.1.8-1.fc28.riscv 489 kB/s | 13 kB 00:00 (3-4/41): doxygen-1. 0% [ ] 640 kB/s | 89 kB 00:28 ETA (3/41): libtalloc-devel-2.1.8-1.fc28.riscv64.rp 349 kB/s | 58 kB 00:00 (4-5/41): doxygen-1. 0% [ ] 649 kB/s | 179 kB 00:28 ETA (4/41): python-talloc-2.1.8-1.fc28.riscv64.rpm 629 kB/s | 34 kB 00:00 (5-6/41): doxygen-1. 1% [ ] 665 kB/s | 309 kB 00:27 ETA (5/41): libtalloc-2.1.8-1.fc28.riscv64.rpm 569 kB/s | 125 kB 00:00 (6-7/41): doxygen-1. 2% [ ] 678 kB/s | 437 kB 00:26 ETA (6/41): python3-talloc-2.1.8-1.fc28.riscv64.rpm 393 kB/s | 34 kB 00:00 (7/41): doxygen-1.8. 2% [ ] 678 kB/s | 437 kB 00:26 ETA (7/41): xml-common-0.6.3-47.fc28.noarch.rpm 704 kB/s | 30 kB 00:00 (8-9/41): docbook-st 2% [- ] 685 kB/s | 531 kB 00:26 ETA (8-10/41): doxygen-1 7% [=- ] 823 kB/s | 1.4 MB 00:20 ETA (8/41): libxslt-1.1.28-13.fc28.riscv64.rpm 938 kB/s | 506 kB 00:00 (9-10/41): docbook-s 11% [== ] 906 kB/s | 2.0 MB 00:18 ETA (9-11/41): doxygen-1 15% [=== ] 1.0 MB/s | 2.9 MB 00:15 ETA (9/41): python2-devel-2.7.14-9.fc28.riscv64.rpm 931 kB/s | 410 kB 00:00 (10-11/41): doxygen- 17% [===- ] 1.0 MB/s | 3.2 MB 00:14 ETA (10/41): python2-2.7.14-9.fc28.riscv64.rpm 887 kB/s | 107 kB 00:00 (11-12/41): doxygen- 19% [===- ] 1.1 MB/s | 3.5 MB 00:13 ETA (11-13/41): docbook- 24% [====- ] 1.2 MB/s | 4.4 MB 00:11 ETA (11/41): docbook-style-xsl-1.79.2-6.fc28.noarch 826 kB/s | 1.6 MB 00:01 (12-13/41): doxygen- 28% [=====- ] 1.2 MB/s | 5.1 MB 00:10 ETA (12-14/41): python3- 33% [======- ] 1.3 MB/s | 6.0 MB 00:09 ETA (12-14/41): python3- 38% [=======- ] 1.4 MB/s | 6.9 MB 00:07 ETA (12/41): python3-devel-3.6.4-14.0.fc28.riscv64. 950 kB/s | 862 kB 00:00 (13-14/41): python2- 42% [======== ] 1.5 MB/s | 7.7 MB 00:07 ETA (13/41): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 543 kB/s | 14 kB 00:00 (14-15/41): python2- 42% [========- ] 1.5 MB/s | 7.7 MB 00:07 ETA (14/41): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 607 kB/s | 15 kB 00:00 (15-16/41): python2- 42% [========- ] 1.5 MB/s | 7.8 MB 00:06 ETA (15/41): pkgconf-1.4.1-1.fc27.riscv64.rpm 635 kB/s | 35 kB 00:00 (16-17/41): doxygen- 43% [========- ] 1.5 MB/s | 7.9 MB 00:06 ETA (16/41): libpkgconf-1.4.1-1.fc27.riscv64.rpm 831 kB/s | 74 kB 00:00 (17-18/41): doxygen- 44% [========- ] 1.5 MB/s | 8.1 MB 00:06 ETA (17/41): python-rpm-macros-3-26.fc28.noarch.rpm 451 kB/s | 11 kB 00:00 (18-19/41): doxygen- 45% [========= ] 1.5 MB/s | 8.2 MB 00:06 ETA (18/41): python3-rpm-generators-5-1.fc28.noarch 518 kB/s | 23 kB 00:00 (19-20/41): doxygen- 45% [========= ] 1.5 MB/s | 8.2 MB 00:06 ETA (19-21/41): doxygen- 50% [========== ] 1.6 MB/s | 9.1 MB 00:05 ETA (19/41): python3-setuptools-38.4.0-3.fc28.noarc 961 kB/s | 620 kB 00:00 (20-21/41): doxygen- 55% [=========== ] 1.6 MB/s | 10 MB 00:04 ETA (20/41): python3-rpm-macros-3-26.fc28.noarch.rp 402 kB/s | 10 kB 00:00 (21-22/41): doxygen- 55% [=========== ] 1.6 MB/s | 10 MB 00:04 ETA (21/41): redhat-rpm-config-96-1.fc28.0.riscv64. 859 kB/s | 75 kB 00:00 (22-23/41): python2- 57% [=========== ] 1.6 MB/s | 10 MB 00:04 ETA (22/41): nim-srpm-macros-1-1.fc28.noarch.rpm 320 kB/s | 7.6 kB 00:00 (23-24/41): python2- 57% [=========== ] 1.6 MB/s | 10 MB 00:04 ETA (23/41): ocaml-srpm-macros-5-2.fc27.noarch.rpm 330 kB/s | 7.8 kB 00:00 (24-25/41): python2- 57% [===========- ] 1.6 MB/s | 10 MB 00:04 ETA (24/41): openblas-srpm-macros-2-2.fc27.noarch.r 284 kB/s | 6.6 kB 00:00 (25-26/41): python2- 57% [===========- ] 1.6 MB/s | 10 MB 00:04 ETA (25/41): qt5-srpm-macros-5.10.0-1.fc28.noarch.r 385 kB/s | 9.0 kB 00:00 (26-27/41): python2- 57% [===========- ] 1.6 MB/s | 10 MB 00:04 ETA (26/41): rust-srpm-macros-5-1.fc28.noarch.rpm 292 kB/s | 8.0 kB 00:00 (27-28/41): python2- 58% [===========- ] 1.6 MB/s | 11 MB 00:04 ETA (27/41): file-5.32-3.fc28.riscv64.rpm 741 kB/s | 81 kB 00:00 (28-29/41): python2- 59% [===========- ] 1.6 MB/s | 11 MB 00:04 ETA (28/41): python2-rpm-macros-3-26.fc28.noarch.rp 398 kB/s | 10 kB 00:00 (29-30/41): python2- 59% [===========- ] 1.6 MB/s | 11 MB 00:04 ETA (29/41): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 322 kB/s | 7.5 kB 00:00 (30-31/41): python2- 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (30/41): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 345 kB/s | 8.2 kB 00:00 (31-32/41): python2- 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (31/41): gnat-srpm-macros-4-5.fc28.noarch.rpm 358 kB/s | 8.8 kB 00:00 (32-33/41): python2- 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (32/41): go-srpm-macros-2-11.fc28.noarch.rpm 302 kB/s | 8.4 kB 00:00 (33-34/41): python2- 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (33/41): perl-srpm-macros-1-26.fc28.noarch.rpm 399 kB/s | 9.7 kB 00:00 (34-35/41): python2- 60% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (34/41): python-srpm-macros-3-26.fc28.noarch.rp 418 kB/s | 10 kB 00:00 (35-36/41): python2- 61% [============ ] 1.6 MB/s | 11 MB 00:04 ETA (35/41): dwz-0.12-5.fc28.riscv64.rpm 874 kB/s | 108 kB 00:00 (36-37/41): python2- 62% [============- ] 1.6 MB/s | 11 MB 00:04 ETA (36/41): doxygen-1.8.12-1.fc27.riscv64.rpm 688 kB/s | 4.0 MB 00:06 (37-38/41): python2- 65% [============= ] 1.5 MB/s | 12 MB 00:04 ETA (37/41): zip-3.0-20.fc28.riscv64.rpm 359 kB/s | 271 kB 00:00 (38-39/41): python2- 67% [============= ] 1.5 MB/s | 12 MB 00:03 ETA (38/41): sgml-common-0.6.3-47.fc28.noarch.rpm 791 kB/s | 59 kB 00:00 (39-40/41): python2- 68% [=============- ] 1.5 MB/s | 12 MB 00:03 ETA (39/41): docbook-dtds-1.0-68.fc28.noarch.rpm 751 kB/s | 376 kB 00:00 (40-41/41): unzip-6. 71% [============== ] 1.5 MB/s | 13 MB 00:03 ETA (40/41): unzip-6.0-36.fc28.riscv64.rpm 961 kB/s | 398 kB 00:00 (41/41): python2-lib 73% [==============- ] 1.6 MB/s | 13 MB 00:03 ETA (41/41): python2-lib 78% [===============- ] 1.6 MB/s | 14 MB 00:02 ETA (41/41): python2-lib 83% [================- ] 1.7 MB/s | 15 MB 00:01 ETA (41/41): python2-lib 88% [=================- ] 1.8 MB/s | 16 MB 00:01 ETA (41/41): python2-lib 93% [==================- ] 1.9 MB/s | 17 MB 00:00 ETA (41/41): python2-lib 97% [===================-] 1.9 MB/s | 18 MB 00:00 ETA (41/41): python2-libs-2.7.14-9.fc28.riscv64.rpm 1.1 MB/s | 8.1 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 18 MB 00:09 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : python2-libs-2.7.14-9.fc [ ] 1/41 Installing : python2-libs-2.7.14-9.fc [= ] 1/41 Installing : python2-libs-2.7.14-9.fc [== ] 1/41 Installing : python2-libs-2.7.14-9.fc [=== ] 1/41 Installing : python2-libs-2.7.14-9.fc [==== ] 1/41 Installing : python2-libs-2.7.14-9.fc [===== ] 1/41 Installing : python2-libs-2.7.14-9.fc [====== ] 1/41 Installing : python2-libs-2.7.14-9.fc [======= ] 1/41 Installing : python2-libs-2.7.14-9.fc [======== ] 1/41 Installing : python2-libs-2.7.14-9.fc [========= ] 1/41 Installing : python2-libs-2.7.14-9.fc [========== ] 1/41 Installing : python2-libs-2.7.14-9.fc [=========== ] 1/41 Installing : python2-libs-2.7.14-9.fc [============ ] 1/41 Installing : python2-libs-2.7.14-9.fc [============= ] 1/41 Installing : python2-libs-2.7.14-9.fc [============== ] 1/41 Installing : python2-libs-2.7.14-9.fc [=============== ] 1/41 Installing : python2-libs-2.7.14-9.fc [================ ] 1/41 Installing : python2-libs-2.7.14-9.fc [================= ] 1/41 Installing : python2-libs-2.7.14-9.fc [================== ] 1/41 Installing : python2-libs-2.7.14-9.fc [=================== ] 1/41 Installing : python2-libs-2.7.14-9.fc [==================== ] 1/41 Installing : python2-libs-2.7.14-9.fc [===================== ] 1/41 Installing : python2-libs-2.7.14-9.fc [====================== ] 1/41 Installing : python2-libs-2.7.14-9.fc [======================= ] 1/41 Installing : python2-libs-2.7.14-9.fc [======================== ] 1/41 Installing : python2-libs-2.7.14-9.fc28.riscv64 1/41 random: crng init done Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 1/41 Installing : python2-2.7.14-9.fc28.ri [ ] 2/41 Installing : python2-2.7.14-9.fc28.ri [====== ] 2/41 Installing : python2-2.7.14-9.fc28.ri [============== ] 2/41 Installing : python2-2.7.14-9.fc28.ri [==================== ] 2/41 Installing : python2-2.7.14-9.fc28.ri [======================= ] 2/41 Installing : python2-2.7.14-9.fc28.ri [======================== ] 2/41 Installing : python2-2.7.14-9.fc28.riscv64 2/41 Installing : libtalloc-2.1.8-1.fc28.r [ ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [= ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [=== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [==== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [====== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [======== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [========= ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [=========== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [============= ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [============== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [================ ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [================= ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [=================== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [===================== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [====================== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.r [======================== ] 3/41 Installing : libtalloc-2.1.8-1.fc28.riscv64 3/41 Running scriptlet: libtalloc-2.1.8-1.fc28.riscv64 3/41 Installing : python-srpm-macros-3-26. [ ] 4/41 Installing : python-srpm-macros-3-26. [======================= ] 4/41 Installing : python-srpm-macros-3-26.fc28.noarch 4/41 Installing : python-rpm-macros-3-26.f [ ] 5/41 Installing : python-rpm-macros-3-26.f [======================= ] 5/41 Installing : python-rpm-macros-3-26.fc28.noarch 5/41 Running scriptlet: xml-common-0.6.3-47.fc28.noarch 6/41 Installing : xml-common-0.6.3-47.fc28 [ ] 6/41 Installing : xml-common-0.6.3-47.fc28 [= ] 6/41 Installing : xml-common-0.6.3-47.fc28 [================= ] 6/41 Installing : xml-common-0.6.3-47.fc28 [=================== ] 6/41 Installing : xml-common-0.6.3-47.fc28 [==================== ] 6/41 Installing : xml-common-0.6.3-47.fc28 [======================== ] 6/41 Installing : xml-common-0.6.3-47.fc28.noarch 6/41 Installing : python-talloc-2.1.8-1.fc [ ] 7/41 Installing : python-talloc-2.1.8-1.fc [=========== ] 7/41 Installing : python-talloc-2.1.8-1.fc [============ ] 7/41 Installing : python-talloc-2.1.8-1.fc [======================= ] 7/41 Installing : python-talloc-2.1.8-1.fc [======================== ] 7/41 Installing : python-talloc-2.1.8-1.fc28.riscv64 7/41 Running scriptlet: python-talloc-2.1.8-1.fc28.riscv64 7/41 Installing : python3-talloc-2.1.8-1.f [ ] 8/41 Installing : python3-talloc-2.1.8-1.f [========== ] 8/41 Installing : python3-talloc-2.1.8-1.f [============ ] 8/41 Installing : python3-talloc-2.1.8-1.f [====================== ] 8/41 Installing : python3-talloc-2.1.8-1.f [======================== ] 8/41 Installing : python3-talloc-2.1.8-1.fc28.riscv64 8/41 Running scriptlet: python3-talloc-2.1.8-1.fc28.riscv64 8/41 Installing : unzip-6.0-36.fc28.riscv6 [ ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 9/41 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 9/41 Installing : unzip-6.0-36.fc28.riscv64 9/41 Installing : zip-3.0-20.fc28.riscv64 [ ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [=== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [==== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [===== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [====== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [======= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [======== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [========= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [========== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [============ ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [============= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [============== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [================ ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [================= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 10/41 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 10/41 Installing : zip-3.0-20.fc28.riscv64 10/41 Installing : sgml-common-0.6.3-47.fc2 [ ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [===== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [====== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [========== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [=========== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [============ ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [============= ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [============== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [=============== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [================ ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [================= ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [================== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [=================== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [==================== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [===================== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [====================== ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [======================= ] 11/41 Installing : sgml-common-0.6.3-47.fc2 [======================== ] 11/41 Installing : sgml-common-0.6.3-47.fc28.noarch 11/41 Installing : docbook-dtds-1.0-68.fc28 [ ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [=== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [==== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [===== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [====== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [======= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [======== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [========= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [========== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [=========== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [============ ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [============= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [============== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [=============== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [================ ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [================= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [=================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [==================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [===================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [====================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [======================= ] 12/41 Installing : docbook-dtds-1.0-68.fc28 [======================== ] 12/41 Installing : docbook-dtds-1.0-68.fc28.noarch 12/41 Running scriptlet: docbook-dtds-1.0-68.fc28.noarch 12/41 Installing : dwz-0.12-5.fc28.riscv64 [ ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 13/41 Installing : dwz-0.12-5.fc28.riscv64 13/41 Installing : perl-srpm-macros-1-26.fc [ ] 14/41 Installing : perl-srpm-macros-1-26.fc [====================== ] 14/41 Installing : perl-srpm-macros-1-26.fc28.noarch 14/41 Installing : go-srpm-macros-2-11.fc28 [ ] 15/41 Installing : go-srpm-macros-2-11.fc28 [====================== ] 15/41 Installing : go-srpm-macros-2-11.fc28.noarch 15/41 Installing : gnat-srpm-macros-4-5.fc2 [ ] 16/41 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 16/41 Installing : gnat-srpm-macros-4-5.fc28.noarch 16/41 Installing : ghc-srpm-macros-1.4.2-7. [ ] 17/41 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 17/41 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 17/41 Installing : fpc-srpm-macros-1.1-4.fc [ ] 18/41 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 18/41 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 18/41 Installing : python2-rpm-macros-3-26. [ ] 19/41 Installing : python2-rpm-macros-3-26. [======================= ] 19/41 Installing : python2-rpm-macros-3-26.fc28.noarch 19/41 Installing : file-5.32-3.fc28.riscv64 [ ] 20/41 Installing : file-5.32-3.fc28.riscv64 [====== ] 20/41 Installing : file-5.32-3.fc28.riscv64 [=========== ] 20/41 Installing : file-5.32-3.fc28.riscv64 [================== ] 20/41 Installing : file-5.32-3.fc28.riscv64 [===================== ] 20/41 Installing : file-5.32-3.fc28.riscv64 [====================== ] 20/41 Installing : file-5.32-3.fc28.riscv64 [======================= ] 20/41 Installing : file-5.32-3.fc28.riscv64 [======================== ] 20/41 Installing : file-5.32-3.fc28.riscv64 20/41 Installing : rust-srpm-macros-5-1.fc2 [ ] 21/41 Installing : rust-srpm-macros-5-1.fc2 [=== ] 21/41 Installing : rust-srpm-macros-5-1.fc2 [===== ] 21/41 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 21/41 Installing : rust-srpm-macros-5-1.fc28.noarch 21/41 Installing : qt5-srpm-macros-5.10.0-1 [ ] 22/41 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 22/41 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 22/41 Installing : openblas-srpm-macros-2-2 [ ] 23/41 Installing : openblas-srpm-macros-2-2 [================ ] 23/41 Installing : openblas-srpm-macros-2-2.fc27.noarch 23/41 Installing : ocaml-srpm-macros-5-2.fc [ ] 24/41 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 24/41 Installing : ocaml-srpm-macros-5-2.fc27.noarch 24/41 Installing : nim-srpm-macros-1-1.fc28 [ ] 25/41 Installing : nim-srpm-macros-1-1.fc28 [=== ] 25/41 Installing : nim-srpm-macros-1-1.fc28 [===== ] 25/41 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 25/41 Installing : nim-srpm-macros-1-1.fc28.noarch 25/41 Installing : redhat-rpm-config-96-1.f [ ] 26/41 Installing : redhat-rpm-config-96-1.f [== ] 26/41 Installing : redhat-rpm-config-96-1.f [=== ] 26/41 Installing : redhat-rpm-config-96-1.f [========= ] 26/41 Installing : redhat-rpm-config-96-1.f [=========== ] 26/41 Installing : redhat-rpm-config-96-1.f [================= ] 26/41 Installing : redhat-rpm-config-96-1.f [================== ] 26/41 Installing : redhat-rpm-config-96-1.f [=================== ] 26/41 Installing : redhat-rpm-config-96-1.f [===================== ] 26/41 Installing : redhat-rpm-config-96-1.f [====================== ] 26/41 Installing : redhat-rpm-config-96-1.f [======================== ] 26/41 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 26/41 Installing : python3-rpm-macros-3-26. [ ] 27/41 Installing : python3-rpm-macros-3-26. [======================= ] 27/41 Installing : python3-rpm-macros-3-26.fc28.noarch 27/41 Installing : python3-setuptools-38.4. [ ] 28/41 Installing : python3-setuptools-38.4. [= ] 28/41 Installing : python3-setuptools-38.4. [== ] 28/41 Installing : python3-setuptools-38.4. [=== ] 28/41 Installing : python3-setuptools-38.4. [==== ] 28/41 Installing : python3-setuptools-38.4. [===== ] 28/41 Installing : python3-setuptools-38.4. [====== ] 28/41 Installing : python3-setuptools-38.4. [======= ] 28/41 Installing : python3-setuptools-38.4. [======== ] 28/41 Installing : python3-setuptools-38.4. [========= ] 28/41 Installing : python3-setuptools-38.4. [========== ] 28/41 Installing : python3-setuptools-38.4. [=========== ] 28/41 Installing : python3-setuptools-38.4. [============ ] 28/41 Installing : python3-setuptools-38.4. [============= ] 28/41 Installing : python3-setuptools-38.4. [============== ] 28/41 Installing : python3-setuptools-38.4. [=============== ] 28/41 Installing : python3-setuptools-38.4. [================ ] 28/41 Installing : python3-setuptools-38.4. [================= ] 28/41 Installing : python3-setuptools-38.4. [================== ] 28/41 Installing : python3-setuptools-38.4. [=================== ] 28/41 Installing : python3-setuptools-38.4. [==================== ] 28/41 Installing : python3-setuptools-38.4. [===================== ] 28/41 Installing : python3-setuptools-38.4. [====================== ] 28/41 Installing : python3-setuptools-38.4. [======================= ] 28/41 Installing : python3-setuptools-38.4. [======================== ] 28/41 Installing : python3-setuptools-38.4.0-3.fc28.noarch 28/41 Installing : python3-rpm-generators-5 [ ] 29/41 Installing : python3-rpm-generators-5 [===== ] 29/41 Installing : python3-rpm-generators-5 [=================== ] 29/41 Installing : python3-rpm-generators-5 [======================== ] 29/41 Installing : python3-rpm-generators-5-1.fc28.noarch 29/41 Installing : libpkgconf-1.4.1-1.fc27. [ ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 30/41 Installing : libpkgconf-1.4.1-1.fc27.riscv64 30/41 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 30/41 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 31/41 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 31/41 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 31/41 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 31/41 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 31/41 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 31/41 Installing : pkgconf-1.4.1-1.fc27.riscv64 31/41 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 32/41 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 32/41 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 32/41 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 32/41 Installing : pkgconf-pkg-config-1.4.1 [ ] 33/41 Installing : pkgconf-pkg-config-1.4.1 [==== ] 33/41 Installing : pkgconf-pkg-config-1.4.1 [===== ] 33/41 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 33/41 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 33/41 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 33/41 Installing : libtalloc-devel-2.1.8-1. [ ] 34/41 Installing : libtalloc-devel-2.1.8-1. [======== ] 34/41 Installing : libtalloc-devel-2.1.8-1. [================ ] 34/41 Installing : libtalloc-devel-2.1.8-1. [================= ] 34/41 Installing : libtalloc-devel-2.1.8-1. [================== ] 34/41 Installing : libtalloc-devel-2.1.8-1. [=================== ] 34/41 Installing : libtalloc-devel-2.1.8-1. [==================== ] 34/41 Installing : libtalloc-devel-2.1.8-1. [====================== ] 34/41 Installing : libtalloc-devel-2.1.8-1. [======================= ] 34/41 Installing : libtalloc-devel-2.1.8-1. [======================== ] 34/41 Installing : libtalloc-devel-2.1.8-1.fc28.riscv64 34/41 Installing : python-talloc-devel-2.1. [ ] 35/41 Installing : python-talloc-devel-2.1. [=================== ] 35/41 Installing : python-talloc-devel-2.1. [==================== ] 35/41 Installing : python-talloc-devel-2.1. [======================== ] 35/41 Installing : python-talloc-devel-2.1.8-1.fc28.riscv64 35/41 Installing : python3-talloc-devel-2.1 [ ] 36/41 Installing : python3-talloc-devel-2.1 [==================== ] 36/41 Installing : python3-talloc-devel-2.1 [====================== ] 36/41 Installing : python3-talloc-devel-2.1.8-1.fc28.riscv64 36/41 Installing : python2-devel-2.7.14-9.f [ ] 37/41 Installing : python2-devel-2.7.14-9.f [= ] 37/41 Installing : python2-devel-2.7.14-9.f [== ] 37/41 Installing : python2-devel-2.7.14-9.f [=== ] 37/41 Installing : python2-devel-2.7.14-9.f [==== ] 37/41 Installing : python2-devel-2.7.14-9.f [===== ] 37/41 Installing : python2-devel-2.7.14-9.f [====== ] 37/41 Installing : python2-devel-2.7.14-9.f [======= ] 37/41 Installing : python2-devel-2.7.14-9.f [======== ] 37/41 Installing : python2-devel-2.7.14-9.f [========= ] 37/41 Installing : python2-devel-2.7.14-9.f [========== ] 37/41 Installing : python2-devel-2.7.14-9.f [=========== ] 37/41 Installing : python2-devel-2.7.14-9.f [============ ] 37/41 Installing : python2-devel-2.7.14-9.f [============= ] 37/41 Installing : python2-devel-2.7.14-9.f [============== ] 37/41 Installing : python2-devel-2.7.14-9.f [=============== ] 37/41 Installing : python2-devel-2.7.14-9.f [================ ] 37/41 Installing : python2-devel-2.7.14-9.f [================= ] 37/41 Installing : python2-devel-2.7.14-9.f [================== ] 37/41 Installing : python2-devel-2.7.14-9.f [=================== ] 37/41 Installing : python2-devel-2.7.14-9.f [==================== ] 37/41 Installing : python2-devel-2.7.14-9.f [===================== ] 37/41 Installing : python2-devel-2.7.14-9.f [====================== ] 37/41 Installing : python2-devel-2.7.14-9.f [======================= ] 37/41 Installing : python2-devel-2.7.14-9.f [======================== ] 37/41 Installing : python2-devel-2.7.14-9.fc28.riscv64 37/41 Installing : python3-devel-3.6.4-14.0 [ ] 38/41 Installing : python3-devel-3.6.4-14.0 [= ] 38/41 Installing : python3-devel-3.6.4-14.0 [== ] 38/41 Installing : python3-devel-3.6.4-14.0 [=== ] 38/41 Installing : python3-devel-3.6.4-14.0 [==== ] 38/41 Installing : python3-devel-3.6.4-14.0 [===== ] 38/41 Installing : python3-devel-3.6.4-14.0 [====== ] 38/41 Installing : python3-devel-3.6.4-14.0 [======= ] 38/41 Installing : python3-devel-3.6.4-14.0 [======== ] 38/41 Installing : python3-devel-3.6.4-14.0 [========= ] 38/41 Installing : python3-devel-3.6.4-14.0 [========== ] 38/41 Installing : python3-devel-3.6.4-14.0 [=========== ] 38/41 Installing : python3-devel-3.6.4-14.0 [============ ] 38/41 Installing : python3-devel-3.6.4-14.0 [============= ] 38/41 Installing : python3-devel-3.6.4-14.0 [============== ] 38/41 Installing : python3-devel-3.6.4-14.0 [=============== ] 38/41 Installing : python3-devel-3.6.4-14.0 [================ ] 38/41 Installing : python3-devel-3.6.4-14.0 [================= ] 38/41 Installing : python3-devel-3.6.4-14.0 [================== ] 38/41 Installing : python3-devel-3.6.4-14.0 [=================== ] 38/41 Installing : python3-devel-3.6.4-14.0 [==================== ] 38/41 Installing : python3-devel-3.6.4-14.0 [===================== ] 38/41 Installing : python3-devel-3.6.4-14.0 [====================== ] 38/41 Installing : python3-devel-3.6.4-14.0 [======================= ] 38/41 Installing : python3-devel-3.6.4-14.0 [======================== ] 38/41 Installing : python3-devel-3.6.4-14.0.fc28.riscv64 38/41 Installing : docbook-style-xsl-1.79.2 [ ] 39/41 Installing : docbook-style-xsl-1.79.2 [= ] 39/41 Installing : docbook-style-xsl-1.79.2 [== ] 39/41 Installing : docbook-style-xsl-1.79.2 [=== ] 39/41 Installing : docbook-style-xsl-1.79.2 [==== ] 39/41 Installing : docbook-style-xsl-1.79.2 [===== ] 39/41 Installing : docbook-style-xsl-1.79.2 [====== ] 39/41 Installing : docbook-style-xsl-1.79.2 [======= ] 39/41 Installing : docbook-style-xsl-1.79.2 [======== ] 39/41 Installing : docbook-style-xsl-1.79.2 [========= ] 39/41 Installing : docbook-style-xsl-1.79.2 [========== ] 39/41 Installing : docbook-style-xsl-1.79.2 [=========== ] 39/41 Installing : docbook-style-xsl-1.79.2 [============ ] 39/41 Installing : docbook-style-xsl-1.79.2 [============= ] 39/41 Installing : docbook-style-xsl-1.79.2 [============== ] 39/41 Installing : docbook-style-xsl-1.79.2 [=============== ] 39/41 Installing : docbook-style-xsl-1.79.2 [================ ] 39/41 Installing : docbook-style-xsl-1.79.2 [================= ] 39/41 Installing : docbook-style-xsl-1.79.2 [================== ] 39/41 Installing : docbook-style-xsl-1.79.2 [=================== ] 39/41 Installing : docbook-style-xsl-1.79.2 [==================== ] 39/41 Installing : docbook-style-xsl-1.79.2 [===================== ] 39/41 Installing : docbook-style-xsl-1.79.2 [====================== ] 39/41 Installing : docbook-style-xsl-1.79.2 [======================= ] 39/41 Installing : docbook-style-xsl-1.79.2 [======================== ] 39/41 Installing : docbook-style-xsl-1.79.2-6.fc28.noarch 39/41 Running scriptlet: docbook-style-xsl-1.79.2-6.fc28.noarch 39/41 Installing : libxslt-1.1.28-13.fc28.r [ ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [=== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [==== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [===== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [====== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [======= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [======== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [========= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [========== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [=========== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [============ ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [============= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [============== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [=============== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [================ ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [================= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [=================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [==================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [===================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [====================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [======================= ] 40/41 Installing : libxslt-1.1.28-13.fc28.r [======================== ] 40/41 Installing : libxslt-1.1.28-13.fc28.riscv64 40/41 Running scriptlet: libxslt-1.1.28-13.fc28.riscv64 40/41 Installing : doxygen-1:1.8.12-1.fc27. [ ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [=== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [==== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [===== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [====== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [======= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [======== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [========= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [========== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [=========== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [============ ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [============= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [============== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [=============== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [================ ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [================= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [=================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [==================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [===================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [====================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [======================= ] 41/41 Installing : doxygen-1:1.8.12-1.fc27. [======================== ] 41/41 Installing : doxygen-1:1.8.12-1.fc27.riscv64 41/41 Running scriptlet: doxygen-1:1.8.12-1.fc27.riscv64 41/41 Verifying : doxygen-1:1.8.12-1.fc27.riscv64 1/41 Verifying : libtalloc-devel-2.1.8-1.fc28.riscv64 2/41 Verifying : python-talloc-devel-2.1.8-1.fc28.riscv64 3/41 Verifying : python3-talloc-devel-2.1.8-1.fc28.riscv64 4/41 Verifying : libtalloc-2.1.8-1.fc28.riscv64 5/41 Verifying : python-talloc-2.1.8-1.fc28.riscv64 6/41 Verifying : python3-talloc-2.1.8-1.fc28.riscv64 7/41 Verifying : docbook-style-xsl-1.79.2-6.fc28.noarch 8/41 Verifying : xml-common-0.6.3-47.fc28.noarch 9/41 Verifying : libxslt-1.1.28-13.fc28.riscv64 10/41 Verifying : python2-devel-2.7.14-9.fc28.riscv64 11/41 Verifying : python2-2.7.14-9.fc28.riscv64 12/41 Verifying : python2-libs-2.7.14-9.fc28.riscv64 13/41 Verifying : python3-devel-3.6.4-14.0.fc28.riscv64 14/41 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 15/41 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 16/41 Verifying : pkgconf-1.4.1-1.fc27.riscv64 17/41 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 18/41 Verifying : python-rpm-macros-3-26.fc28.noarch 19/41 Verifying : python3-rpm-generators-5-1.fc28.noarch 20/41 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 21/41 Verifying : python3-rpm-macros-3-26.fc28.noarch 22/41 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 23/41 Verifying : nim-srpm-macros-1-1.fc28.noarch 24/41 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 25/41 Verifying : openblas-srpm-macros-2-2.fc27.noarch 26/41 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 27/41 Verifying : rust-srpm-macros-5-1.fc28.noarch 28/41 Verifying : file-5.32-3.fc28.riscv64 29/41 Verifying : python2-rpm-macros-3-26.fc28.noarch 30/41 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 31/41 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 32/41 Verifying : gnat-srpm-macros-4-5.fc28.noarch 33/41 Verifying : go-srpm-macros-2-11.fc28.noarch 34/41 Verifying : perl-srpm-macros-1-26.fc28.noarch 35/41 Verifying : python-srpm-macros-3-26.fc28.noarch 36/41 Verifying : dwz-0.12-5.fc28.riscv64 37/41 Verifying : zip-3.0-20.fc28.riscv64 38/41 Verifying : docbook-dtds-1.0-68.fc28.noarch 39/41 Verifying : sgml-common-0.6.3-47.fc28.noarch 40/41 Verifying : unzip-6.0-36.fc28.riscv64 41/41 Installed: docbook-style-xsl.noarch 1.79.2-6.fc28 doxygen.riscv64 1:1.8.12-1.fc27 libtalloc-devel.riscv64 2.1.8-1.fc28 libxslt.riscv64 1.1.28-13.fc28 python-talloc-devel.riscv64 2.1.8-1.fc28 python2-devel.riscv64 2.7.14-9.fc28 python3-devel.riscv64 3.6.4-14.0.fc28 python3-talloc-devel.riscv64 2.1.8-1.fc28 docbook-dtds.noarch 1.0-68.fc28 dwz.riscv64 0.12-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 libtalloc.riscv64 2.1.8-1.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python-talloc.riscv64 2.1.8-1.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-rpm-macros.noarch 3-26.fc28 python3-setuptools.noarch 38.4.0-3.fc28 python3-talloc.riscv64 2.1.8-1.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 sgml-common.noarch 0.6.3-47.fc28 unzip.riscv64 6.0-36.fc28 xml-common.noarch 0.6.3-47.fc28 zip.riscv64 3.0-20.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:05:20 ago on Wed Feb 21 14:02:33 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:05:40 ago on Wed Feb 21 14:02:33 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group patch unzip bzip2 gawk util-linux which tar diffutils grep gzip make fedora-release xz info redhat-rpm-config coreutils sed shadow-utils rpm-build cpio bash findutils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 11 Packages Total download size: 11 M Installed size: 48 M Downloading Packages: (1/11): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1-3/11): tar-1.29-7 6% [= ] 2.4 MB/s | 751 kB 00:04 ETA (1/11): make-4.2.1-6.fc27.riscv64.rpm 903 kB/s | 486 kB 00:00 (2-3/11): tar-1.29-7 12% [==- ] 2.4 MB/s | 1.4 MB 00:04 ETA (2/11): diffutils-3.6-3.fc28.riscv64.rpm 768 kB/s | 577 kB 00:00 (3-4/11): tar-1.29-7 14% [==- ] 2.4 MB/s | 1.7 MB 00:04 ETA (3/11): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 656 kB/s | 235 kB 00:00 (4-5/11): zstd-1.3.3 18% [===- ] 2.4 MB/s | 2.1 MB 00:03 ETA (4/11): tar-1.29-7.fc27.riscv64.rpm 685 kB/s | 805 kB 00:01 (5-6/11): which-2.21 20% [==== ] 2.3 MB/s | 2.3 MB 00:03 ETA (5/11): which-2.21-4.fc28.riscv64.rpm 335 kB/s | 65 kB 00:00 (6/11): zstd-1.3.3-1 20% [==== ] 2.3 MB/s | 2.3 MB 00:03 ETA (6/11): xz-5.2.3-5.fc28.riscv64.rpm 877 kB/s | 212 kB 00:00 (7-8/11): patch-2.7. 25% [===== ] 2.3 MB/s | 3.0 MB 00:03 ETA (7/11): patch-2.7.5-6.fc27.riscv64.rpm 715 kB/s | 270 kB 00:00 (8-9/11): bzip2-1.0. 27% [===== ] 2.3 MB/s | 3.1 MB 00:03 ETA (8/11): bzip2-1.0.6-24.fc28.riscv64.rpm 450 kB/s | 81 kB 00:00 (9-10/11): elfutils- 28% [=====- ] 2.3 MB/s | 3.2 MB 00:03 ETA (9-11/11): binutils- 35% [======= ] 2.3 MB/s | 4.0 MB 00:03 ETA (9-11/11): binutils- 43% [========- ] 2.3 MB/s | 4.9 MB 00:02 ETA (9/11): zstd-1.3.3-1.fc27.riscv64.rpm 692 kB/s | 1.1 MB 00:01 (10-11/11): elfutils 44% [========- ] 2.3 MB/s | 5.1 MB 00:02 ETA (10/11): elfutils-0.170-4.fc28.riscv64.rpm 760 kB/s | 791 kB 00:01 (11/11): binutils-2. 46% [========= ] 2.2 MB/s | 5.3 MB 00:02 ETA (11/11): binutils-2. 53% [==========- ] 2.3 MB/s | 6.1 MB 00:02 ETA (11/11): binutils-2. 60% [============ ] 2.3 MB/s | 7.0 MB 00:01 ETA (11/11): binutils-2. 68% [=============- ] 2.3 MB/s | 7.8 MB 00:01 ETA (11/11): binutils-2. 75% [=============== ] 2.4 MB/s | 8.7 MB 00:01 ETA (11/11): binutils-2. 83% [================- ] 2.4 MB/s | 9.6 MB 00:00 ETA (11/11): binutils-2. 90% [================== ] 2.4 MB/s | 10 MB 00:00 ETA (11/11): binutils-2. 97% [===================-] 2.4 MB/s | 11 MB 00:00 ETA (11/11): binutils-2.30-1.fc28.riscv64.rpm 1.8 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 1.9 MB/s | 11 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [==== ] 1/1 Preparing : [========= ] 1/1 Preparing : [============= ] 1/1 Preparing : [================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/11 Installing : binutils-2.30-1.fc28.ris [= ] 1/11 Installing : binutils-2.30-1.fc28.ris [== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======== ] 1/11 Installing : binutils-2.30-1.fc28.ris [========= ] 1/11 Installing : binutils-2.30-1.fc28.ris [========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/11 Installing : binutils-2.30-1.fc28.ris [============ ] 1/11 Installing : binutils-2.30-1.fc28.ris [============= ] 1/11 Installing : binutils-2.30-1.fc28.ris [============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/11 Installing : binutils-2.30-1.fc28.ris [================ ] 1/11 Installing : binutils-2.30-1.fc28.ris [================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/11 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/11 Installing : binutils-2.30-1.fc28.riscv64 1/11 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/11 Installing : elfutils-0.170-4.fc28.ri [ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/11 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/11 Installing : elfutils-0.170-4.fc28.riscv64 2/11 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/11 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/11 Installing : bzip2-1.0.6-24.fc28.riscv64 3/11 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/11 Installing : xz-5.2.3-5.fc28.riscv64 4/11 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/11 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/11 Installing : patch-2.7.5-6.fc27.riscv64 5/11 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/11 Installing : zstd-1.3.3-1.fc27.riscv64 6/11 Installing : diffutils-3.6-3.fc28.ris [ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/11 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/11 Installing : diffutils-3.6-3.fc28.riscv64 7/11 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/11 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/11 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/11 Installing : tar-2:1.29-7.fc27.riscv64 8/11 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/11 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/11 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/11 Installing : which-2.21-4.fc28.riscv6 [ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/11 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/11 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/11 Installing : which-2.21-4.fc28.riscv64 10/11 Running scriptlet: which-2.21-4.fc28.riscv64 10/11 Installing : make-1:4.2.1-6.fc27.risc [ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================ ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 11/11 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 11/11 Installing : make-1:4.2.1-6.fc27.riscv64 11/11 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 11/11 Verifying : tar-2:1.29-7.fc27.riscv64 1/11 Verifying : diffutils-3.6-3.fc28.riscv64 2/11 Verifying : make-1:4.2.1-6.fc27.riscv64 3/11 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 4/11 Verifying : zstd-1.3.3-1.fc27.riscv64 5/11 Verifying : which-2.21-4.fc28.riscv64 6/11 Verifying : patch-2.7.5-6.fc27.riscv64 7/11 Verifying : xz-5.2.3-5.fc28.riscv64 8/11 Verifying : bzip2-1.0.6-24.fc28.riscv64 9/11 Verifying : elfutils-0.170-4.fc28.riscv64 10/11 Verifying : binutils-2.30-1.fc28.riscv64 11/11 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:07:18 ago on Wed Feb 21 14:02:33 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 546 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 613 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-heade 36% [======= ] 752 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 823 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 806 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 89% [=================- ] 950 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 971 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 948 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 996 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off