OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 12:32:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + su -c 'rpmbuild -ba /builddir/build/SPECS/libtelnet.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild warning: bogus date in %changelog: Wed Oct 24 2009 Sean Middleditch 0.12-1 warning: bogus date in %changelog: Wed Aug 31 2009 Sean Middleditch 0.11-1 warning: bogus date in %changelog: Wed Aug 29 2009 Sean Middleditch 0.10-2 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bGEKzc + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf libtelnet-0.21 + /usr/bin/gzip -dc /builddir/build/SOURCES/libtelnet-0.21.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd libtelnet-0.21 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lhJBIK + umask 022 + cd /builddir/build/BUILD + cd libtelnet-0.21 + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... none checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether gcc and cc understand -c and -o together... yes checking for doxygen... /usr/bin/doxygen checking for ANSI C header files... (cached) yes checking for riscv64-redhat-linux-gnu-pkg-config... /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for zlib... yes checking for inline... inline configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating doc/man/Makefile config.status: creating doc/man/man1/Makefile config.status: creating doc/man/man3/Makefile config.status: creating test/Makefile config.status: creating util/Makefile config.status: creating libtelnet-uninstalled.pc config.status: creating libtelnet.pc config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + make -j2 make all-recursive make[1]: Entering directory '/builddir/build/BUILD/libtelnet-0.21' Making all in . make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21' /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o libtelnet.lo libtelnet.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c libtelnet.c -fPIC -DPIC -o .libs/libtelnet.o /bin/sh ./libtool --tag=CC --mode=link gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -version-info 2:0:0 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libtelnet.la -rpath /usr/lib64 libtelnet.lo -lz libtool: link: gcc -shared -fPIC -DPIC .libs/libtelnet.o -lz -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -O2 -Wl,-z -Wl,relro -Wl,-soname -Wl,libtelnet.so.2 -o .libs/libtelnet.so.2.0.0 libtool: link: (cd ".libs" && rm -f "libtelnet.so.2" && ln -s "libtelnet.so.2.0.0" "libtelnet.so.2") libtool: link: (cd ".libs" && rm -f "libtelnet.so" && ln -s "libtelnet.so.2.0.0" "libtelnet.so") libtool: link: ( cd ".libs" && rm -f "libtelnet.la" && ln -s "../libtelnet.la" "libtelnet.la" ) make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21' Making all in doc make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc' Making all in man make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' Making all in man1 make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' Making all in man3 make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' ( cd "../../.." ; /usr/bin/doxygen ) Searching for include files... Searching for example files... Searching for images... Searching for dot files... Searching for msc files... Searching for dia files... Searching for files to exclude Searching INPUT for files to process... Reading and parsing tag files Parsing files Preprocessing /builddir/build/BUILD/libtelnet-0.21/libtelnet.h... Parsing file /builddir/build/BUILD/libtelnet-0.21/libtelnet.h... Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating code for file libtelnet.h... Generating file documentation... Generating docs for file libtelnet.h... Generating page documentation... Generating group documentation... Generating class documentation... Generating docs for compound telnet_environ_t... Generating docs for compound telnet_event_t... /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:246: warning: Member data (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:258: warning: Member error (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:266: warning: Member iac (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:274: warning: Member neg (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:284: warning: Member sub (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:293: warning: Member zmp (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:302: warning: Member ttype (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:311: warning: Member compress (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:321: warning: Member environ (variable) of class telnet_event_t is not documented. /builddir/build/BUILD/libtelnet-0.21/libtelnet.h:330: warning: Member mssp (variable) of class telnet_event_t is not documented. Generating docs for nested compound telnet_event_t::compress_t... Generating docs for nested compound telnet_event_t::data_t... Generating docs for nested compound telnet_event_t::environ_t... Generating docs for nested compound telnet_event_t::error_t... Generating docs for nested compound telnet_event_t::iac_t... Generating docs for nested compound telnet_event_t::mssp_t... Generating docs for nested compound telnet_event_t::negotiate_t... Generating docs for nested compound telnet_event_t::subnegotiate_t... Generating docs for nested compound telnet_event_t::ttype_t... Generating docs for nested compound telnet_event_t::zmp_t... Generating docs for compound telnet_telopt_t... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 208/65536 hits=879 misses=227 finished... touch "build-stamp" make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc' Making all in util make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/util' gcc -DHAVE_CONFIG_H -I. -I.. -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o telnet-client.o telnet-client.c gcc -DHAVE_CONFIG_H -I. -I.. -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o telnet-chatd.o telnet-chatd.c In file included from /usr/include/sys/types.h:25:0, from telnet-client.c:19: /usr/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ In file included from /usr/include/sys/socket.h:22:0, from telnet-chatd.c:20: /usr/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -c -o telnet-proxy.o telnet-proxy.c In file included from /usr/include/sys/socket.h:22:0, from telnet-proxy.c:20: /usr/include/features.h:184:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" ^~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o telnet-client telnet-client.o ../libtelnet.la libtool: link: gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z -Wl,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/telnet-client telnet-client.o ../.libs/libtelnet.so -lz /bin/sh ../libtool --tag=CC --mode=link gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o telnet-chatd telnet-chatd.o ../libtelnet.la /bin/sh ../libtool --tag=CC --mode=link gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o telnet-proxy telnet-proxy.o ../libtelnet.la libtool: link: gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z -Wl,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/telnet-chatd telnet-chatd.o ../.libs/libtelnet.so -lz libtool: link: gcc -I.. -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z -Wl,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/telnet-proxy telnet-proxy.o ../.libs/libtelnet.so -lz make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/util' Making all in test make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/test' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/test' make[1]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3z3ZjI + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 ++ dirname /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 + cd libtelnet-0.21 + rm -rf /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 + make install 'INSTALL=install -p' DESTDIR=/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 Making install in . make[1]: Entering directory '/builddir/build/BUILD/libtelnet-0.21' make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21' test -z "/usr/lib64" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64" /bin/sh ./libtool --mode=install install -p libtelnet.la '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64' libtool: install: install -p .libs/libtelnet.so.2.0.0 /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64/libtelnet.so.2.0.0 libtool: install: (cd /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64 && { ln -s -f libtelnet.so.2.0.0 libtelnet.so.2 || { rm -f libtelnet.so.2 && ln -s libtelnet.so.2.0.0 libtelnet.so.2; }; }) libtool: install: (cd /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64 && { ln -s -f libtelnet.so.2.0.0 libtelnet.so || { rm -f libtelnet.so && ln -s libtelnet.so.2.0.0 libtelnet.so; }; }) libtool: install: install -p .libs/libtelnet.lai /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64/libtelnet.la libtool: install: warning: remember to run `libtool --finish /usr/lib64' test -z "/usr/include" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/include" install -p -m 644 libtelnet.h '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/include' test -z "/usr/lib64/pkgconfig" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64/pkgconfig" install -p -m 644 libtelnet.pc '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64/pkgconfig' make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21' make[1]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21' Making install in doc make[1]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc' Making install in man make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' Making install in man1 make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/man/man1" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/man/man1" install -p -m 644 telnet-chatd.1 telnet-client.1 telnet-proxy.1 '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/man/man1' make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man1' Making install in man3 make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' make[4]: Nothing to be done for 'install-exec-am'. test -z "/usr/share/man/man3" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/man/man3" install -p -m 644 libtelnet.h.3 telnet_environ_t.3 telnet_event_t.3 telnet_event_t_compress_t.3 telnet_event_t_data_t.3 telnet_event_t_environ_t.3 telnet_event_t_error_t.3 telnet_event_t_iac_t.3 telnet_event_t_negotiate_t.3 telnet_event_t_subnegotiate_t.3 telnet_event_t_ttype_t.3 telnet_event_t_zmp_t.3 telnet_event_t_mssp_t.3 telnet_telopt_t.3 '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/man/man3' make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man/man3' make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[4]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc/man' make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[3]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc' make[1]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/doc' Making install in util make[1]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/util' make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/util' test -z "/usr/bin" || /usr/bin/mkdir -p "/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/bin" /bin/sh ../libtool --mode=install install -p telnet-client telnet-chatd telnet-proxy '/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/bin' libtool: install: warning: `../libtelnet.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/telnet-client /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/bin/telnet-client libtool: install: warning: `../libtelnet.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/telnet-chatd /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/bin/telnet-chatd libtool: install: warning: `../libtelnet.la' has not been installed in `/usr/lib64' libtool: install: install -p .libs/telnet-proxy /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/bin/telnet-proxy make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/util' make[1]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/util' Making install in test make[1]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/test' make[2]: Entering directory '/builddir/build/BUILD/libtelnet-0.21/test' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/test' make[1]: Leaving directory '/builddir/build/BUILD/libtelnet-0.21/test' + rm /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/lib64/libtelnet.la + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: libtelnet-0.21-9.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.X9hu8I + umask 022random: crng init done + cd /builddir/build/BUILD + cd libtelnet-0.21 + DOCDIR=/builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/doc/libtelnet + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/doc/libtelnet + cp -pr README /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/doc/libtelnet + cp -pr COPYING /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/doc/libtelnet + cp -pr NEWS /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64/usr/share/doc/libtelnet + exit 0 Provides: libtelnet = 0.21-9.fc28 libtelnet(riscv-64) = 0.21-9.fc28 libtelnet.so.2()(64bit) Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libz.so.1()(64bit) rtld(GNU_HASH) Processing files: libtelnet-devel-0.21-9.fc28.riscv64 Provides: libtelnet-devel = 0.21-9.fc28 libtelnet-devel(riscv-64) = 0.21-9.fc28 pkgconfig(libtelnet) = 0.21 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libtelnet.so.2()(64bit) Processing files: libtelnet-utils-0.21-9.fc28.riscv64 Provides: libtelnet-utils = 0.21-9.fc28 libtelnet-utils(riscv-64) = 0.21-9.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libtelnet.so.2()(64bit) libz.so.1()(64bit) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /builddir/build/SRPMS/libtelnet-0.21-9.fc28.src.rpm Wrote: /builddir/build/RPMS/riscv64/libtelnet-0.21-9.fc28.riscv64.rpm Wrote: /builddir/build/RPMS/riscv64/libtelnet-devel-0.21-9.fc28.riscv64.rpm Wrote: /builddir/build/RPMS/riscv64/libtelnet-utils-0.21-9.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bunyjO + umask 022 + cd /builddir/build/BUILD + cd libtelnet-0.21 + rm -rf /builddir/build/BUILDROOT/libtelnet-0.21-9.fc28.riscv64 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off