OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 09:55:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/libtar-1.2.20-8.fc25.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nocheck Installing /var/tmp/libtar-1.2.20-8.fc25.src.rpm warning: bogus date in %changelog: Fri Apr 7 2005 Michael Schwendt Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OF34bY + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf libtar + /usr/bin/gzip -dc /rpmbuild/SOURCES/0907a9034eaf2a57e8e4a9439f793f3f05d446cd.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd libtar + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #1 (libtar-1.2.11-missing-protos.patch):' Patch #1 (libtar-1.2.11-missing-protos.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file lib/append.c patching file lib/output.c patching file lib/wrapper.c + echo 'Patch #4 (libtar-1.2.11-mem-deref.patch):' Patch #4 (libtar-1.2.11-mem-deref.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file lib/libtar.h patching file lib/util.c + echo 'Patch #5 (libtar-1.2.20-fix-resource-leaks.patch):' Patch #5 (libtar-1.2.20-fix-resource-leaks.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file lib/append.c patching file lib/extract.c patching file libtar/libtar.c patching file lib/handle.c patching file libtar/libtar.c + echo 'Patch #6 (libtar-1.2.11-bz729009.patch):' Patch #6 (libtar-1.2.11-bz729009.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file libtar/Makefile.in + echo 'Patch #7 (libtar-1.2.20-no-static-buffer.patch):' Patch #7 (libtar-1.2.20-no-static-buffer.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file lib/decode.c patching file lib/handle.c patching file lib/libtar.h patching file lib/handle.c patching file lib/decode.c + sed -i 's/-rpath $(libdir)/-rpath $(libdir) -version-number 1:2:20/' lib/Makefile.in + autoreconf -iv autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal -I autoconf autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'autoconf'. libtoolize: copying file 'autoconf/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'autoconf'. libtoolize: copying file 'autoconf/libtool.m4' libtoolize: copying file 'autoconf/ltoptions.m4' libtoolize: copying file 'autoconf/ltsugar.m4' libtoolize: copying file 'autoconf/ltversion.m4' libtoolize: copying file 'autoconf/lt~obsolete.m4' autoreconf: running: /usr/bin/autoconf autoreconf: running: /usr/bin/autoheader autoreconf: running: automake --add-missing --copy --no-force configure.ac:19: installing 'autoconf/compile' configure.ac:33: installing 'autoconf/config.guess' configure.ac:33: installing 'autoconf/config.sub' configure.ac:13: installing 'autoconf/install-sh' configure.ac:13: installing 'autoconf/missing' Makefile.am: installing './INSTALL' autoreconf: Leaving directory `.' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Pe9l4l + umask 022 + cd /rpmbuild/BUILD + cd libtar + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./autoconf/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./autoconf/config.guess ++ basename ./autoconf/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./autoconf/config.guess '/usr/lib/rpm/redhat/config.guess' -> './autoconf/config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./autoconf/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./autoconf/config.sub ++ basename ./autoconf/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./autoconf/config.sub '/usr/lib/rpm/redhat/config.sub' -> './autoconf/config.sub' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./autoconf/ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for epkg... no checking for mkencap... no checking for style of include used by make... GNU checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for strlcpy... no checking for strsep... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... random: crng init done yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for riscv64-redhat-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for an ANSI C-conforming const... yes checking for thread local storage (TLS) class... __thread checking for ANSI C header files... (cached) yes checking for unistd.h... (cached) yes checking whether sys/types.h defines makedev... yes checking for major_t... no checking for minor_t... no checking for dev_t... yes checking for socklen_t... yes checking for uint64_t... yes checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking for nlink_t... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking for working basename... no checking for libgen.h... (cached) yes checking for working dirname... no checking fnmatch.h usability... yes checking fnmatch.h presence... yes checking for fnmatch.h... yes checking for working POSIX fnmatch... yes checking for lchown... yes checking whether makedev expects three arguments... no checking for working snprintf... yes checking for strdup... yes checking for strftime... yes checking for strlcpy... (cached) no checking for strmode... no checking for strsep... (cached) yes checking for gzread in -lz... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating listhash/libtar_listhash.h config.status: creating listhash/libtar_list.c config.status: creating listhash/libtar_hash.c config.status: creating listhash/libtar_list_new.3 config.status: creating listhash/libtar_hash_new.3 config.status: creating Makefile config.status: creating lib/Makefile config.status: creating libtar/Makefile config.status: creating doc/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + make -j2 make all-recursive make[1]: Entering directory '/rpmbuild/BUILD/libtar' Making all in lib make[2]: Entering directory '/rpmbuild/BUILD/libtar/lib' /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o append.lo append.c /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o block.lo block.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c block.c -fPIC -DPIC -o .libs/block.o libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c append.c -fPIC -DPIC -o .libs/append.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o decode.lo decode.c /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o encode.lo encode.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c decode.c -fPIC -DPIC -o .libs/decode.o libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c encode.c -fPIC -DPIC -o .libs/encode.o encode.c: In function 'th_set_device': encode.c:151:13: warning: In the GNU C Library, "major" is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use "major", include directly. If you did not intend to use a system-defined macro "major", you should undefine it after including . int_to_oct(major(device), t->th_buf.devmajor, 8); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ encode.c:152:13: warning: In the GNU C Library, "minor" is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use "minor", include directly. If you did not intend to use a system-defined macro "minor", you should undefine it after including . int_to_oct(minor(device), t->th_buf.devminor, 8); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o extract.lo extract.c In file included from ./internal.h:16:0, from encode.c:13: ./libtar.h:283:28: warning: '%*lo' directive output may be truncated writing between 6 and 11 bytes into a region of size 8 [-Wformat-truncation=] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:151:2: note: in expansion of macro 'int_to_oct' int_to_oct(major(device), t->th_buf.devmajor, 8); ^~~~~~~~~~ ./libtar.h:283:28: note: directive argument in the range [0, 4294967295] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:151:2: note: in expansion of macro 'int_to_oct' int_to_oct(major(device), t->th_buf.devmajor, 8); ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from encode.c:15: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 13 bytes into a destination of size 8 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./internal.h:16:0, from encode.c:13: ./libtar.h:283:28: warning: '%*lo' directive output may be truncated writing between 6 and 11 bytes into a region of size 8 [-Wformat-truncation=] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:152:2: note: in expansion of macro 'int_to_oct' int_to_oct(minor(device), t->th_buf.devminor, 8); ^~~~~~~~~~ ./libtar.h:283:28: note: directive argument in the range [0, 4294967295] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:152:2: note: in expansion of macro 'int_to_oct' int_to_oct(minor(device), t->th_buf.devminor, 8); ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from encode.c:15: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 13 bytes into a destination of size 8 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./internal.h:16:0, from encode.c:13: encode.c: In function 'th_set_user': ./libtar.h:283:28: warning: '%*lo' directive output may be truncated writing between 6 and 11 bytes into a region of size 8 [-Wformat-truncation=] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:166:2: note: in expansion of macro 'int_to_oct' int_to_oct(uid, t->th_buf.uid, 8); ^~~~~~~~~~ ./libtar.h:283:28: note: directive argument in the range [0, 4294967295] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:166:2: note: in expansion of macro 'int_to_oct' int_to_oct(uid, t->th_buf.uid, 8); ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from encode.c:15: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 13 bytes into a destination of size 8 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./internal.h:16:0, from encode.c:13: encode.c: In function 'th_set_group': ./libtar.h:283:28: warning: '%*lo' directive output may be truncated writing between 6 and 11 bytes into a region of size 8 [-Wformat-truncation=] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:180:2: note: in expansion of macro 'int_to_oct' int_to_oct(gid, t->th_buf.gid, 8); ^~~~~~~~~~ ./libtar.h:283:28: note: directive argument in the range [0, 4294967295] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:180:2: note: in expansion of macro 'int_to_oct' int_to_oct(gid, t->th_buf.gid, 8); ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from encode.c:15: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 13 bytes into a destination of size 8 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./internal.h:16:0, from encode.c:13: encode.c: In function 'th_set_mode': ./libtar.h:283:28: warning: '%*lo' directive output may be truncated writing between 6 and 11 bytes into a region of size 8 [-Wformat-truncation=] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:193:2: note: in expansion of macro 'int_to_oct' int_to_oct(fmode, (t)->th_buf.mode, 8); ^~~~~~~~~~ ./libtar.h:283:28: note: directive argument in the range [0, 4294967295] snprintf((oct), (octlen), "%*lo ", (octlen) - 2, (unsigned long)(num)) ^ encode.c:193:2: note: in expansion of macro 'int_to_oct' int_to_oct(fmode, (t)->th_buf.mode, 8); ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from encode.c:15: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 13 bytes into a destination of size 8 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o handle.lo handle.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c extract.c -fPIC -DPIC -o .libs/extract.o libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c handle.c -fPIC -DPIC -o .libs/handle.o extract.c: In function 'tar_extract_regfile': extract.c:160:8: warning: variable 'gid' set but not used [-Wunused-but-set-variable] gid_t gid; ^~~ extract.c:159:8: warning: variable 'uid' set but not used [-Wunused-but-set-variable] uid_t uid; ^~~ extract.c:157:9: warning: variable 'mode' set but not used [-Wunused-but-set-variable] mode_t mode; ^~~~ extract.c: In function 'tar_extract_chardev': extract.c:391:13: warning: In the GNU C Library, "makedev" is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use "makedev", include directly. If you did not intend to use a system-defined macro "makedev", you should undefine it after including . compat_makedev(devmaj, devmin)) == -1) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ extract.c: In function 'tar_extract_blockdev': extract.c:430:13: warning: In the GNU C Library, "makedev" is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use "makedev", include directly. If you did not intend to use a system-defined macro "makedev", you should undefine it after including . compat_makedev(devmaj, devmin)) == -1) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ handle.c: In function 'tar_init': handle.c:47:17: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] (*t)->pathname = pathname; ^ /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o libtar_hash.lo ../listhash/libtar_hash.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../listhash/libtar_hash.c -fPIC -DPIC -o .libs/libtar_hash.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o libtar_list.lo ../listhash/libtar_list.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../listhash/libtar_list.c -fPIC -DPIC -o .libs/libtar_list.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o output.lo output.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c output.c -fPIC -DPIC -o .libs/output.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o util.lo util.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c util.c -fPIC -DPIC -o .libs/util.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o wrapper.lo wrapper.c util.c: In function 'int_to_oct_nonull': util.c:159:26: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'size_t {aka long unsigned int}' [-Wformat=] snprintf(oct, octlen, "%*lo", octlen - 1, (unsigned long)num); ~^~~ ~~~~~~~~~~ libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c wrapper.c -fPIC -DPIC -o .libs/wrapper.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o strlcpy.lo ../compat/strlcpy.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../compat/strlcpy.c -fPIC -DPIC -o .libs/strlcpy.o /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o basename.lo ../compat/basename.c /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o dirname.lo ../compat/dirname.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../compat/basename.c -fPIC -DPIC -o .libs/basename.o libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../compat/dirname.c -fPIC -DPIC -o .libs/dirname.o ../compat/basename.c:31:13: warning: 'rcsid' defined but not used [-Wunused-variable] static char rcsid[] = "$OpenBSD: basename.c,v 1.4 1999/05/30 17:10:30 espie Exp $"; ^~~~~ ../compat/dirname.c:31:13: warning: 'rcsid' defined but not used [-Wunused-variable] static char rcsid[] = "$OpenBSD: dirname.c,v 1.4 1999/05/30 17:10:30 espie Exp $"; ^~~~~ /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c -o strmode.lo ../compat/strmode.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I. -I.. -I. -I../compat -I../listhash -c ../compat/strmode.c -fPIC -DPIC -o .libs/strmode.o /bin/sh ../libtool --mode=link gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libtar.la append.lo block.lo decode.lo encode.lo extract.lo handle.lo libtar_hash.lo libtar_list.lo output.lo util.lo wrapper.lo strlcpy.lo basename.lo dirname.lo strmode.lo -rpath /usr/lib64 -version-number 1:2:20 libtool: link: gcc -shared -fPIC -DPIC .libs/append.o .libs/block.o .libs/decode.o .libs/encode.o .libs/extract.o .libs/handle.o .libs/libtar_hash.o .libs/libtar_list.o .libs/output.o .libs/util.o .libs/wrapper.o .libs/strlcpy.o .libs/basename.o .libs/dirname.o .libs/strmode.o -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -O2 -g -fstack-protector-strong -grecord-gcc-switches -Wl,-z -Wl,relro -Wl,-soname -Wl,libtar.so.1 -o .libs/libtar.so.1.2.20 libtool: link: (cd ".libs" && rm -f "libtar.so.1" && ln -s "libtar.so.1.2.20" "libtar.so.1") libtool: link: (cd ".libs" && rm -f "libtar.so" && ln -s "libtar.so.1.2.20" "libtar.so") libtool: link: ( cd ".libs" && rm -f "libtar.la" && ln -s "../libtar.la" "libtar.la" ) make[2]: Leaving directory '/rpmbuild/BUILD/libtar/lib' Making all in libtar make[2]: Entering directory '/rpmbuild/BUILD/libtar/libtar' /bin/sh ../libtool --mode=compile gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I.. -I../lib -I../listhash -I../lib -I../compat -c -o libtar.lo libtar.c libtool: compile: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I.. -I../lib -I../listhash -I../lib -I../compat -c libtar.c -fPIC -DPIC -o .libs/libtar.o libtar.c: In function 'gzopen_frontend': libtar.c:102:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] return (int)gzf; ^ /bin/sh ../libtool --mode=link gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o libtar libtar.lo -L../lib -lz -ltar libtool: link: gcc -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wl,-z -Wl,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -o .libs/libtar .libs/libtar.o -L../lib -lz /rpmbuild/BUILD/libtar/lib/.libs/libtar.so make[2]: Leaving directory '/rpmbuild/BUILD/libtar/libtar' Making all in doc make[2]: Entering directory '/rpmbuild/BUILD/libtar/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/rpmbuild/BUILD/libtar/doc' make[2]: Entering directory '/rpmbuild/BUILD/libtar' make[2]: Leaving directory '/rpmbuild/BUILD/libtar' make[1]: Leaving directory '/rpmbuild/BUILD/libtar' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.D8BTSd + umask 022 + cd /rpmbuild/BUILD + '[' /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 '!=' / ']' + rm -rf /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 ++ dirname /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 + mkdir -p /rpmbuild/BUILDROOT + mkdir /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 + cd libtar + make install DESTDIR=/rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 Making install in lib make[1]: Entering directory '/rpmbuild/BUILD/libtar/lib' mkdir -p -m 755 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64 /bin/sh ../libtool --mode=install /usr/bin/install -c -m 644 libtar.la /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64 libtool: install: /usr/bin/install -c -m 644 .libs/libtar.so.1.2.20 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64/libtar.so.1.2.20 libtool: install: (cd /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64 && { ln -s -f libtar.so.1.2.20 libtar.so.1 || { rm -f libtar.so.1 && ln -s libtar.so.1.2.20 libtar.so.1; }; }) libtool: install: (cd /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64 && { ln -s -f libtar.so.1.2.20 libtar.so || { rm -f libtar.so && ln -s libtar.so.1.2.20 libtar.so; }; }) libtool: install: /usr/bin/install -c -m 644 .libs/libtar.lai /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64/libtar.la libtool: warning: remember to run 'libtool --finish /usr/lib64' mkdir -p -m 755 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/include /usr/bin/install -c -m 644 ./libtar.h /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/include /usr/bin/install -c -m 644 ../listhash/libtar_listhash.h /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/include make[1]: Leaving directory '/rpmbuild/BUILD/libtar/lib' Making install in libtar make[1]: Entering directory '/rpmbuild/BUILD/libtar/libtar' mkdir -p -m 755 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/bin /bin/sh ../libtool --mode=install /usr/bin/install -c libtar /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/bin libtool: warning: '/rpmbuild/BUILD/libtar/lib/libtar.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -c .libs/libtar /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/bin/libtar make[1]: Leaving directory '/rpmbuild/BUILD/libtar/libtar' Making install in doc make[1]: Entering directory '/rpmbuild/BUILD/libtar/doc' mkdir -p -m 755 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 /usr/bin/install -c -m 644 ./tar_open.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in tar_fdopen tar_fd tar_close; do \ echo ".so man3/tar_open.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./tar_append_file.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in tar_append_eof tar_append_regfile; do \ echo ".so man3/tar_append_file.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./tar_block_read.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in tar_block_write; do \ echo ".so man3/tar_block_read.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./th_read.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in th_write; do \ echo ".so man3/th_read.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./th_set_from_stat.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in th_finish th_set_device th_set_group th_set_link th_set_mode th_set_path th_set_type th_set_user; do \ echo ".so man3/th_set_from_stat.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./tar_extract_file.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in tar_extract_blockdev tar_extract_chardev tar_extract_dir tar_extract_fifo tar_extract_hardlink tar_extract_regfile tar_extract_symlink tar_skip_regfile tar_set_file_perms; do \ echo ".so man3/tar_extract_file.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./th_get_pathname.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in TH_ISBLK TH_ISCHR TH_ISDIR TH_ISFIFO TH_ISLNK TH_ISLONGLINK TH_ISLONGNAME TH_ISREG TH_ISSYM th_get_crc th_get_devmajor th_get_devminor th_get_gid th_get_linkname th_get_mode th_get_mtime th_get_size th_get_uid; do \ echo ".so man3/th_get_pathname.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./th_print_long_ls.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in th_print; do \ echo ".so man3/th_print_long_ls.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ./tar_extract_all.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in tar_extract_glob tar_append_tree; do \ echo ".so man3/tar_extract_all.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ../listhash/libtar_hash_new.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in libtar_hash_free libtar_hash_next libtar_hash_prev libtar_hash_search libtar_hash_add libtar_hash_getkey libtar_hash_del; do \ echo ".so man3/libtar_hash_new.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done /usr/bin/install -c -m 644 ../listhash/libtar_list_new.3 /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3 for i in libtar_list_free libtar_list_next libtar_list_prev libtar_list_search libtar_list_add libtar_list_add_str libtar_list_del libtar_list_dup libtar_list_merge; do \ echo ".so man3/libtar_list_new.3" > /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/man/man3/${i}.3; \ done make[1]: Leaving directory '/rpmbuild/BUILD/libtar/doc' make[1]: Entering directory '/rpmbuild/BUILD/libtar' make[2]: Entering directory '/rpmbuild/BUILD/libtar' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/rpmbuild/BUILD/libtar' make[1]: Leaving directory '/rpmbuild/BUILD/libtar' + chmod +x /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64/libtar.so.1.2.20 + rm /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/lib64/libtar.la + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: libtar-1.2.20-8.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.6D38ve + umask 022 + cd /rpmbuild/BUILD + cd libtar + DOCDIR=/rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + cp -pr COPYRIGHT /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + cp -pr TODO /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + cp -pr README /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + cp -pr ChangeLog ChangeLog-1.0.x /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64/usr/share/doc/libtar + exit 0 Provides: libtar = 1.2.20-8.fc28 libtar(riscv-64) = 1.2.20-8.fc28 libtar.so.1()(64bit) Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libtar.so.1()(64bit) libz.so.1()(64bit) rtld(GNU_HASH) Processing files: libtar-devel-1.2.20-8.fc28.riscv64 Provides: libtar-devel = 1.2.20-8.fc28 libtar-devel(riscv-64) = 1.2.20-8.fc28 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libtar.so.1()(64bit) Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /rpmbuild/RPMS/riscv64/libtar-1.2.20-8.fc28.riscv64.rpm Wrote: /rpmbuild/RPMS/riscv64/libtar-devel-1.2.20-8.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.68Tm9m + umask 022 + cd /rpmbuild/BUILD + cd libtar + /usr/bin/rm -rf /rpmbuild/BUILDROOT/libtar-1.2.20-8.fc28.riscv64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.Ix5FcO + umask 022 + cd /rpmbuild/BUILD + rm -rf libtar + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off