OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): orphan cleanup on readonly fs EXT4-fs (vda): 4 orphan inodes deleted EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Tue Feb 20 21:30:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/libqb-1.0-1.fc25.0.riscv64.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nocheck Installing /var/tmp/libqb-1.0-1.fc25.0.riscv64.src.rpm warning: user rjones does not exist - using root warning: group rjones does not exist - using root warning: user rjones does not exist - using root warning: group rjones does not exist - using root warning: user rjones does not exist - using root warning: group rjones does not exist - using root warning: user rjones does not exist - using root warning: group rjones does not exist - using root Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.u1EZnf + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf libqb-1.0 + /usr/bin/xz -dc /rpmbuild/SOURCES/libqb-1.0.tar.xz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd libqb-1.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + cp /rpmbuild/SOURCES/config.sub /rpmbuild/SOURCES/config.guess build-aux/ + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.G7J2jv + umask 022 + cd /rpmbuild/BUILD + cd libqb-1.0 + ./autogen.sh autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltversion.m4' autoreconf: running: /usr/bin/autoconf autoreconf: running: /usr/bin/autoheader autoreconf: running: automake --add-missing --copy --no-force autoreconf: Leaving directory `.' Now run ./configure and make + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./build-aux/config.sub ++ basename ./build-aux/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./build-aux/config.sub '/usr/lib/rpm/redhat/config.sub' -> './build-aux/config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./build-aux/config.guess ++ basename ./build-aux/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./build-aux/config.guess '/usr/lib/rpm/redhat/config.guess' -> './build-aux/config.guess' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./build-aux/ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-syslog-tests checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no random: crng init done checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes checking dependency style of gcc... none checking whether make supports nested variables... (cached) yes checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: building in place srcdir:. checking for riscv64-redhat-linux-gnu-g++... no checking for riscv64-redhat-linux-gnu-c++... no checking for riscv64-redhat-linux-gnu-gpp... no checking for riscv64-redhat-linux-gnu-aCC... no checking for riscv64-redhat-linux-gnu-CC... no checking for riscv64-redhat-linux-gnu-cxx... no checking for riscv64-redhat-linux-gnu-cc++... no checking for riscv64-redhat-linux-gnu-cl.exe... no checking for riscv64-redhat-linux-gnu-FCC... no checking for riscv64-redhat-linux-gnu-KCC... no checking for riscv64-redhat-linux-gnu-RCC... no checking for riscv64-redhat-linux-gnu-xlC_r... no checking for riscv64-redhat-linux-gnu-xlC... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for gawk... (cached) gawk checking for riscv64-redhat-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking how to run the C preprocessor... gcc -E checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for pkg-config... pkg-config checking for doxygen... doxygen checking for splint... no configure: Sanitizing prefix: /usr configure: Sanitizing exec_prefix: /usr checking for library containing pthread_create... -lpthread checking for library containing mq_open... -lrt checking for library containing dlopen... -ldl checking for library containing socket... none required checking for library containing gethostbyname... none required checking for riscv64-redhat-linux-gnu-pkg-config... /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for CHECK... yes checking for GLIB... no checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking link.h usability... yes checking link.h presence... yes checking for link.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for stdint.h... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for dlfcn.h... (cached) yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for sys/time.h... (cached) yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking sys/epoll.h usability... yes checking sys/epoll.h presence... yes checking for sys/epoll.h... yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking sys/event.h usability... no checking sys/event.h presence... no checking for sys/event.h... no checking sys/sockio.h usability... no checking sys/sockio.h presence... no checking for sys/sockio.h... no checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking for unistd.h... (cached) yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking sys/sem.h usability... yes checking sys/sem.h presence... yes checking for sys/sem.h... yes checking sys/ipc.h usability... yes checking sys/ipc.h presence... yes checking for sys/ipc.h... yes checking sys/msg.h usability... yes checking sys/msg.h presence... yes checking for sys/msg.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking for uid_t in sys/types.h... yes checking for inline... inline checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for mode_t... yes checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for uint64_t... yes checking for uint32_t... yes checking for uint16_t... yes checking for uint8_t... yes checking for struct sockaddr_un.sun_len... no checking looking for union semun in sys/sem.h... no checking for MSG_NOSIGNAL... yes checking for SO_NOSIGPIPE ... no checking for unistd.h... (cached) yes checking for working chown... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/param.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking whether strerror_r is declared... yes checking for strerror_r... yes checking whether strerror_r returns char *... yes checking for alarm... yes checking for clock_gettime... yes checking for ftruncate... yes checking for gettimeofday... yes checking for localtime... yes checking for localtime_r... yes checking for memset... yes checking for munmap... yes checking for socket... yes checking for strchr... yes checking for strrchr... yes checking for strdup... yes checking for strstr... yes checking for strcasecmp... yes checking for poll... yes checking for epoll_create... yes checking for epoll_create1... yes checking for kqueue... no checking for random... yes checking for rand... yes checking for getrlimit... yes checking for sysconf... yes checking for pthread_spin_lock... yes checking for pthread_setschedparam... yes checking for pthread_mutexattr_setpshared... yes checking for pthread_condattr_setpshared... yes checking for sem_timedwait... yes checking for semtimedop... yes checking for sched_get_priority_max... yes checking for sched_setscheduler... yes checking for getpeerucred... no checking for getpeereid... no checking for strlcpy... no checking for strlcat... no checking for strchrnul... yes checking for architecture in riscv64... riscv64 checking for os in linux-gnu... Linux checking whether GCC supports builtin sync intrinsics... yes checking whether GCC supports builtin atomic intrinsics... yes checking whether atomics need memory barrier... yes checking whether gcc supports "-Wall"... yes checking whether gcc supports "-Wshadow"... yes checking whether gcc supports "-Wmissing-prototypes"... yes checking whether gcc supports "-Wmissing-declarations"... yes checking whether gcc supports "-Wstrict-prototypes"... yes checking whether gcc supports "-Wdeclaration-after-statement"... yes checking whether gcc supports "-Wpointer-arith"... yes checking whether gcc supports "-Wwrite-strings"... yes checking whether gcc supports "-Wcast-align"... yes checking whether gcc supports "-Wbad-function-cast"... yes checking whether gcc supports "-Wmissing-format-attribute"... yes checking whether gcc supports "-Wformat=2"... yes checking whether gcc supports "-Wformat-security"... no checking whether gcc supports "-Wno-format-nonliteral"... yes checking whether gcc supports "-Wno-long-long"... yes checking whether gcc supports "-Wunsigned-char"... no checking whether gcc supports "-Wgnu89-inline"... no checking whether gcc supports "-Wno-strict-aliasing"... yes checking whether gcc supports "-Wmissing-format-attribute"... yes checking whether gcc supports "-Wsuggest-attribute=format"... yes configure: Enabling syslog tests checking whether GCC supports __attribute__((section())... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating include/qb/Makefile config.status: creating lib/Makefile config.status: creating lib/libqb.pc config.status: creating tools/Makefile config.status: creating tests/Makefile config.status: creating tests/test.conf config.status: creating examples/Makefile config.status: creating docs/Makefile config.status: creating docs/common.dox config.status: creating docs/html.dox config.status: creating docs/man.dox config.status: creating include/config.h config.status: creating include/qb/qbconfig.h config.status: include/qb/qbconfig.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands libqb configuration: Version = 1.0 Prefix = /usr Executables = /usr/sbin Man pages = /usr/share/man Doc dir = ${datarootdir}/doc/${PACKAGE_TARNAME} Libraries = /usr/lib64 Header files = /usr/include Arch-independent files = /usr/share State information = /var System configuration = /etc SOCKETDIR = /var/run Features = epoll gcc__sync attribute-section libqb build info: Optimization = Debug options = Extra compiler warnings = Env. defined CFLAG = -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 Env. defined CPPFLAGS = Env. defined LDFLAGS = -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld ANSI defined CPPFLAGS = Coverage CFLAGS = Coverage LDFLAGS = Fatal War. CFLAGS = Final CFLAGS = -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -Wall -Wshadow -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-align -Wbad-function-cast -Wmissing-format-attribute -Wformat=2 -Wno-format-nonliteral -Wno-long-long -Wno-strict-aliasing Final CPPFLAGS = Final LDFLAGS = -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld + make -j2 make all-recursive make[1]: Entering directory '/rpmbuild/BUILD/libqb-1.0' Making all in include make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' make all-recursive make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' Making all in qb make[4]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make all-am make[5]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[5]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[4]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[4]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' make[4]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' Making all in lib make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/lib' CC util.lo CC hdb.lo CC ringbuffer.lo CC ringbuffer_helper.lo CC array.lo CC loop.lo CC loop_poll.lo CC loop_job.lo CC loop_timerlist.lo CC ipcc.lo CC ipcs.lo CC ipc_shm.lo ipc_shm.c: In function 'qb_ipcs_shm_connect': ipc_shm.c:296:36: warning: '-request-' directive output may be truncated writing 9 bytes into a region of size between 1 and 255 [-Wformat-truncation=] snprintf(r->request, NAME_MAX, "%s-request-%s", ^~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_shm.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 10 and 297 bytes into a destination of size 255 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_shm.c:298:37: warning: '-response-' directive output may be truncated writing 10 bytes into a region of size between 1 and 255 [-Wformat-truncation=] snprintf(r->response, NAME_MAX, "%s-response-%s", ^~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_shm.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 11 and 298 bytes into a destination of size 255 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_shm.c:300:34: warning: '-event-' directive output may be truncated writing 7 bytes into a region of size between 1 and 255 [-Wformat-truncation=] snprintf(r->event, NAME_MAX, "%s-event-%s", ^~~~~~~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_shm.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 8 and 295 bytes into a destination of size 255 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC ipc_setup.lo CC ipc_socket.lo ipc_setup.c: In function 'qb_ipcc_us_setup_connect': ipc_setup.c:289:53: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 107 [-Wformat-truncation=] snprintf(address.sun_path + 1, UNIX_PATH_MAX - 1, "%s", socket_name); ^~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_setup.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin_snprintf' output between 1 and 255 bytes into a destination of size 107 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_setup.c: In function 'qb_ipcs_us_publish': ipc_setup.c:538:53: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 107 [-Wformat-truncation=] snprintf(un_addr.sun_path + 1, UNIX_PATH_MAX - 1, "%s", s->name); ^~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_setup.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin_snprintf' output between 1 and 255 bytes into a destination of size 107 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC log.lo ipc_socket.c: In function 'qb_ipcs_us_connect': ipc_socket.c:747:37: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 252 [-Wformat-truncation=] snprintf(r->request, NAME_MAX, "qb-%s-control-%s", ^~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_socket.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 300 bytes into a destination of size 255 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_socket.c:749:38: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size 252 [-Wformat-truncation=] snprintf(r->response, NAME_MAX, "qb-%s-%s", s->name, c->description); ^~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_socket.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 5 and 292 bytes into a destination of size 255 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_socket.c:819:31: warning: '%s' directive output may be truncated writing 8 bytes into a region of size between 0 and 4095 [-Wformat-truncation=] snprintf(path, PATH_MAX, "%s-%s", r->response, "response"); ^~ ~~~~~~~~~~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_socket.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 10 and 4105 bytes into a destination of size 4096 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ipc_socket.c:834:31: warning: '%s' directive output may be truncated writing 5 bytes into a region of size between 0 and 4095 [-Wformat-truncation=] snprintf(path, PATH_MAX, "%s-%s", r->response, "event"); ^~ ~~~~~~~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from ipc_socket.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 4102 bytes into a destination of size 4096 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC log_thread.lo CC log_blackbox.lo CC log_file.lo log_blackbox.c: In function 'qb_log_blackbox_open': log_blackbox.c:147:38: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 4095 [-Wformat-truncation=] snprintf(t->filename, PATH_MAX, "%s-%d-blackbox", t->name, getpid()); ^~ In file included from /usr/include/stdio.h:862:0, from ../include/os_base.h:28, from log_blackbox.c:21: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 12 and 4117 bytes into a destination of size 4096 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC log_syslog.lo CC log_dcs.lo CC log_format.lo CC map.lo CC skiplist.lo CC hashtable.lo CC trie.lo CC unix.lo CC loop_poll_epoll.lo CC strlcpy.lo CC strlcat.lo CCLD libqb.la make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/lib' Making all in docs make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/docs' mkdir -p man3 mkdir -p man3 doxygen man.dox doxygen man.dox mkdir -p man3 doxygen man.dox make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/docs' Making all in tools make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tools' CC qb_blackbox-qb_blackbox.o CCLD qb-blackbox make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tools' Making all in tests make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tests' CC bmc.o CC bmcpt.o CC bms-bms.o CC rbreader.o CC rbwriter.o CC bench_log-bench-log.o CC format_compare_speed.o CC loop.o CCLD bmc CCLD bmcpt CCLD bms CCLD rbreader CCLD rbwriter CCLD bench-log CCLD format_compare_speed CCLD loop make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tests' Making all in examples make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/examples' CC mapnotify-mapnotify.o CC simplelog-simplelog.o CC tcpclient-tcpclient.o CC tcpserver-tcpserver.o CC ipcclient-ipcclient.o CC ipcserver-ipcserver.o CCLD mapnotify CCLD simplelog CCLD tcpclient CCLD tcpserver CCLD ipcclient CCLD ipcserver make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/examples' make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0' make[1]: Leaving directory '/rpmbuild/BUILD/libqb-1.0' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.oCZfk0 + umask 022 + cd /rpmbuild/BUILD + '[' /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 '!=' / ']' + rm -rf /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 ++ dirname /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 + mkdir -p /rpmbuild/BUILDROOT + mkdir /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 + cd libqb-1.0 + make install DESTDIR=/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 make install-recursive make[1]: Entering directory '/rpmbuild/BUILD/libqb-1.0' Making install in include make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' Making install in qb make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[4]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/include/qb/' /usr/bin/install -c -m 644 qbhdb.h qblist.h qbdefs.h qbatomic.h qbloop.h qbrb.h qbutil.h qbarray.h qbipcc.h qbipcs.h qbipc_common.h qblog.h qbconfig.h qbmap.h '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/include/qb/' make[4]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include/qb' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' make[4]: Entering directory '/rpmbuild/BUILD/libqb-1.0/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/include' Making install in lib make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/lib' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/lib' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64' /bin/sh ../libtool --mode=install /usr/bin/install -c libqb.la '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64' libtool: install: /usr/bin/install -c .libs/libqb.so.0.18.0 /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64/libqb.so.0.18.0 libtool: install: (cd /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64 && { ln -s -f libqb.so.0.18.0 libqb.so.0 || { rm -f libqb.so.0 && ln -s libqb.so.0.18.0 libqb.so.0; }; }) libtool: install: (cd /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64 && { ln -s -f libqb.so.0.18.0 libqb.so || { rm -f libqb.so && ln -s libqb.so.0.18.0 libqb.so; }; }) libtool: install: /usr/bin/install -c .libs/libqb.lai /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64/libqb.la libtool: warning: remember to run 'libtool --finish /usr/lib64' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64/pkgconfig' /usr/bin/install -c -m 644 libqb.pc '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/lib64/pkgconfig' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/lib' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/lib' Making install in docs make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/docs' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/docs' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/man/man3' /usr/bin/install -c -m 644 man3/qbarray.h.3 man3/qbatomic.h.3 man3/qbdefs.h.3 man3/qbhdb.h.3 man3/qbipc_common.h.3 man3/qbipcc.h.3 man3/qbipcs.h.3 man3/qblist.h.3 man3/qblog.h.3 man3/qbloop.h.3 man3/qbmap.h.3 man3/qbrb.h.3 man3/qbutil.h.3 '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/man/man3' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/man/man8' /usr/bin/install -c -m 644 man8/qb-blackbox.8 '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/man/man8' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/docs' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/docs' Making install in tools make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tools' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tools' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c qb-blackbox '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/sbin' libtool: warning: '../lib/libqb.la' has not been installed in '/usr/lib64' libtool: install: /usr/bin/install -c .libs/qb-blackbox /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/sbin/qb-blackbox make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tools' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tools' Making install in tests make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tests' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tests' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/tests' Making install in examples make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0/examples' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0/examples' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/examples' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0/examples' make[2]: Entering directory '/rpmbuild/BUILD/libqb-1.0' make[3]: Entering directory '/rpmbuild/BUILD/libqb-1.0' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/doc/libqb' /usr/bin/install -c -m 644 COPYING INSTALL README.markdown '/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/doc/libqb' make[3]: Leaving directory '/rpmbuild/BUILD/libqb-1.0' make[2]: Leaving directory '/rpmbuild/BUILD/libqb-1.0' make[1]: Leaving directory '/rpmbuild/BUILD/libqb-1.0' + find /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 -name '*.la' -exec rm -f '{}' ';' + rm -rf /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64//usr/share/doc/libqb + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: libqb-1.0-1.fc28.0.riscv64.riscv64 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Nq9zSH + umask 022 + cd /rpmbuild/BUILD + cd libqb-1.0 + LICENSEDIR=/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb + cp -pr COPYING /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb + exit 0 Provides: libqb = 1.0-1.fc28.0.riscv64 libqb(riscv-64) = 1.0-1.fc28.0.riscv64 libqb.so.0()(64bit) Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.27)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.27)(64bit) libqb.so.0()(64bit) librt.so.1()(64bit) rtld(GNU_HASH) Processing files: libqb-devel-1.0-1.fc28.0.riscv64.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.nYHE9K + umask 022 + cd /rpmbuild/BUILD + cd libqb-1.0 + DOCDIR=/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/doc/libqb-devel + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/doc/libqb-devel + cp -pr README.markdown /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/doc/libqb-devel + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.KU82eQ + umask 022 + cd /rpmbuild/BUILD + cd libqb-1.0 + LICENSEDIR=/rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb-devel + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb-devel + cp -pr COPYING /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64/usr/share/licenses/libqb-devel + exit 0 Provides: libqb-devel = 1.0-1.fc28.0.riscv64 libqb-devel(riscv-64) = 1.0-1.fc28.0.riscv64 pkgconfig(libqb) = 1.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libqb.so.0()(64bit) Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /rpmbuild/RPMS/riscv64/libqb-1.0-1.fc28.0.riscv64.riscv64.rpm Wrote: /rpmbuild/RPMS/riscv64/libqb-devel-1.0-1.fc28.0.riscv64.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Oy55W6 + umask 022 + cd /rpmbuild/BUILD + cd libqb-1.0 + /usr/bin/rm -rf /rpmbuild/BUILDROOT/libqb-1.0-1.fc28.0.riscv64.riscv64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.qQvCnD + umask 022 + cd /rpmbuild/BUILD + rm -rf libqb-1.0 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off