[ 0.0] Examining the guest ... [ 15.6] Setting a random seed [ 15.7] Installing firstboot script: /mnt/tmp/riscv64/tmp/libfplll.Qa4QFg/libfplll-boot.sh [ 15.7] Copying: /mnt/tmp/riscv64/tmp/libfplll.Qa4QFg/libfplll-4.0.5-1.fc25.src.rpm to /var/tmp [ 15.8] Copying: /mnt/tmp/riscv64/tmp/libfplll.Qa4QFg/local.repo to /etc/yum.repos.d/ [ 15.9] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Reached target Remote File Systems. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket. Starting udev Coldplug all Devices... Starting Journal Service... Starting Remount Root and Kernel File Systems... Mounting POSIX Message Queue File System... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... EXT4-fs (vda): re-mounted. Opts: (null) Starting Apply Kernel Variables... [ OK ] Listening on Network Service Netlink Socket. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory (/tmp). Starting Configure read-only root support... Starting Create System Users... Starting Rebuild Hardware Database... systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. Starting Flush Journal to Persistent Storage... systemd-journald[81]: Received request to flush runtime journal from PID 1 [ OK ] Started Configure read-only root support. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Rebuild Dynamic Linker Cache... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for…Hardware Database (22s / 1min 35s) [** ] (1 of 3) A start job is running for…Hardware Database (22s / 1min 35s) [*** ] (1 of 3) A start job is running for…Hardware Database (23s / 1min 35s) [ *** ] (2 of 3) A start job is running for…dplug all Devices (23s / no limit) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Kernel Device Manager... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started dnf makecache timer. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. Starting Login Service... Starting OpenSSH ecdsa Server Key Generation... Starting OpenSSH rsa Server Key Generation... Starting OpenSSH ed25519 Server Key Generation... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Login Service. Starting Network Service... [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Found device /dev/ttyS0. [ OK ] Started Network Service. [ *** ] A start job is running for OpenSSH …er Key Generation (47s / no limit) [ ***] A start job is running for OpenSSH …er Key Generation (48s / no limit) [ **] A start job is running for OpenSSH …er Key Generation (50s / no limit) [ *] A start job is running for OpenSSH …er Key Generation (52s / no limit) [ **] A start job is running for OpenSSH …er Key Generation (53s / no limit) [ ***] A start job is running for OpenSSH …er Key Generation (54s / no limit) [ *** ] A start job is running for OpenSSH …er Key Generation (55s / no limit) [ *** ] A start job is running for OpenSSH …er Key Generation (55s / no limit) [*** ] A start job is running for OpenSSH …er Key Generation (56s / no limit) [ OK ] Started OpenSSH rsa Server Key Generation. [ OK ] Reached target Network. Starting Permit User Sessions... Starting libguestfs firstboot service... Starting Wait for Network to be Configured... [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [ OK ] Started Permit User Sessions. firstboot.sh[150]: /usr/lib/virt-sysprep/firstboot.sh start [ OK ] Started Serial Getty on ttyS0. firstboot.sh[150]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. firstboot.sh[150]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-libfplll-Qa4QFg-libfplll-boot-sh === firstboot.sh[150]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[150]: + set -e firstboot.sh[150]: + exec random: crng init done Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.15.0-rc9-00064-gf923ce3a29af on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: [ OK ] Removed slice system-sshd\x2dkeygen.slice. [ OK ] Stopped target Timers. [ OK ] Stopped target Network is Online. [ OK ] Stopped Wait for Network to be Configured. Stopping Login Service... Stopping D-Bus System Message Bus... [ OK ] Stopped target Login Prompts. Stopping Serial Getty on ttyS0... Stopping Getty on tty1... [ OK ] Stopped Login Service. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped libguestfs firstboot service. [ OK ] Stopped target Basic System. [ OK ] Stopped dnf makecache timer. [ OK ] Stopped target Paths. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped Update is Completed. [ OK ] Stopped Rebuild Hardware Database. Stopping Load/Save Random Seed... [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Rebuild Dynamic Linker Cache. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped target Network. Stopping Network Service... [ OK ] Stopped Network Service. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped Configure read-only root support. Unmounting Temporary Directory (/tmp)... [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Power-Off... systemd-shutdow: 20 output lines suppressed due to ratelimiting systemd-shutdown[1]: Syncing filesystems and block devices. systemd-shutdown[1]: Sending SIGTERM to remaining processes... systemd-journald[81]: Received SIGTERM from PID 1 (systemd-shutdow). systemd-shutdown[1]: Sending SIGKILL to remaining processes... systemd-shutdown[1]: Unmounting file systems. EXT4-fs (vda): re-mounted. Opts: data=ordered systemd-shutdown[1]: All filesystems unmounted. systemd-shutdown[1]: Deactivating swaps. systemd-shutdown[1]: All swaps deactivated. systemd-shutdown[1]: Detaching loop devices. systemd-shutdown[1]: All loop devices detached. systemd-shutdown[1]: Detaching DM devices. reboot: Power down Power off cp: cannot stat '/mnt/tmp/riscv64/tmp/libfplll.Qa4QFg/RPMS/noarch/*.noarch.rpm': No such file or directory /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64/RPMS /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild Spawning worker 0 with 961 pkgs Spawning worker 1 with 961 pkgs Spawning worker 2 with 961 pkgs Spawning worker 3 with 961 pkgs Spawning worker 4 with 961 pkgs Spawning worker 5 with 961 pkgs Spawning worker 6 with 961 pkgs Spawning worker 7 with 961 pkgs Spawning worker 8 with 961 pkgs Spawning worker 9 with 961 pkgs Spawning worker 10 with 960 pkgs Spawning worker 11 with 960 pkgs Spawning worker 12 with 960 pkgs Spawning worker 13 with 960 pkgs Spawning worker 14 with 960 pkgs Spawning worker 15 with 960 pkgs Workers Finished Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list RPMS/ RPMS/repodata/ deleting RPMS/repodata/e4626277c3467411f6e065201e9e31909c90743a895a65b75a5e38bc93336939-primary.sqlite.bz2 deleting RPMS/repodata/d9d6e41c8910e92e1f3b0f43dcaaf9021ae3c4eed0fc5c53b1114acc3578e8b5-other.xml.gz deleting RPMS/repodata/9d4d9152d8d6388ec70600621dbabf52d8199eb5467bb1e18ffc9c7af58d0822-filelists.sqlite.bz2 deleting RPMS/repodata/902e3e8d08e7fa4c03a6e07347f74f5d335d26e8fd35871977a7294f9c2ba5a6-primary.xml.gz deleting RPMS/repodata/69a1a03af34ec92881421082472f3d84b228727a3101a88b270b0f832f36f400-filelists.xml.gz deleting RPMS/repodata/2104e148222522aa1bc4577b51a903fa578b1666e938bd2c666ca4b0cdec338c-other.sqlite.bz2 RPMS/repodata/0ac4fd8f086b5386eb1464c5c5c3f0751c0b9543ed5096906f96d0c4fe25386b-comps-f28.xml.gz RPMS/repodata/1b601f4422977934a9036c2ccfa2d6acaf2cced67c6a9a52e6ca82fbd73f179f-filelists.sqlite.bz2 RPMS/repodata/1c8c3f6e796a11e9ea1cffc4c2566cee9900b0fddebdc14b4412a076070d0af3-filelists.xml.gz RPMS/repodata/35a641278a77a1d9de571174c6b48d6f803dd0e263ed5a12f587fd9e587591e3-other.xml.gz RPMS/repodata/5aba13c2ed44baf8a41a4985868ec9b21372e283fa3a2a2d4a055930171d67e0-primary.sqlite.bz2 RPMS/repodata/5d4ceea5dfc3cb4cc31f3252bca144b8ec321584612aa4dd407502dbb17119ca-comps-f28.xml RPMS/repodata/68c976b838b76b7ab84d68115a19aa539a3ba6d6ef1a524830dbe751d188e39d-other.sqlite.bz2 RPMS/repodata/ffa14168f03ed9311b6285b08e4ee71f9ce523130630f289403b019c6e99a91b-primary.xml.gz RPMS/repodata/repomd.xml RPMS/riscv64/ RPMS/riscv64/libfplll-4.0.5-1.fc28.riscv64.rpm RPMS/riscv64/libfplll-devel-4.0.5-1.fc28.riscv64.rpm RPMS/riscv64/libfplll-tools-4.0.5-1.fc28.riscv64.rpm sent 42,942,047 bytes received 12,954 bytes 12,272,857.43 bytes/sec total size is 10,662,403,134 speedup is 248.22 ~/d/fedora-riscv-autobuild /mnt/tmp/riscv64 ~/d/fedora-riscv-autobuild sending incremental file list SRPMS/ SRPMS/libfplll-4.0.5-1.fc28.src.rpm sent 530,660 bytes received 44 bytes 212,281.60 bytes/sec total size is 12,674,225,901 speedup is 23,881.91 sending incremental file list sent 620,070 bytes received 16 bytes 177,167.43 bytes/sec total size is 9,139,532,558 speedup is 14,739.14 sending incremental file list sent 168,550 bytes received 16 bytes 48,161.71 bytes/sec total size is 1,479,651,164 speedup is 8,777.87 sending incremental file list repodata/ deleting repodata/e4626277c3467411f6e065201e9e31909c90743a895a65b75a5e38bc93336939-primary.sqlite.bz2 deleting repodata/d9d6e41c8910e92e1f3b0f43dcaaf9021ae3c4eed0fc5c53b1114acc3578e8b5-other.xml.gz deleting repodata/9d4d9152d8d6388ec70600621dbabf52d8199eb5467bb1e18ffc9c7af58d0822-filelists.sqlite.bz2 deleting repodata/902e3e8d08e7fa4c03a6e07347f74f5d335d26e8fd35871977a7294f9c2ba5a6-primary.xml.gz deleting repodata/69a1a03af34ec92881421082472f3d84b228727a3101a88b270b0f832f36f400-filelists.xml.gz deleting repodata/2104e148222522aa1bc4577b51a903fa578b1666e938bd2c666ca4b0cdec338c-other.sqlite.bz2 repodata/0ac4fd8f086b5386eb1464c5c5c3f0751c0b9543ed5096906f96d0c4fe25386b-comps-f28.xml.gz repodata/1b601f4422977934a9036c2ccfa2d6acaf2cced67c6a9a52e6ca82fbd73f179f-filelists.sqlite.bz2 repodata/1c8c3f6e796a11e9ea1cffc4c2566cee9900b0fddebdc14b4412a076070d0af3-filelists.xml.gz repodata/35a641278a77a1d9de571174c6b48d6f803dd0e263ed5a12f587fd9e587591e3-other.xml.gz repodata/5aba13c2ed44baf8a41a4985868ec9b21372e283fa3a2a2d4a055930171d67e0-primary.sqlite.bz2 repodata/5d4ceea5dfc3cb4cc31f3252bca144b8ec321584612aa4dd407502dbb17119ca-comps-f28.xml repodata/68c976b838b76b7ab84d68115a19aa539a3ba6d6ef1a524830dbe751d188e39d-other.sqlite.bz2 repodata/ffa14168f03ed9311b6285b08e4ee71f9ce523130630f289403b019c6e99a91b-primary.xml.gz repodata/repomd.xml sent 40,928,265 bytes received 12,842 bytes 765,254.34 bytes/sec total size is 43,219,412 speedup is 1.06 sending incremental file list logs/libfplll-4.0.5-1.fc25.src.rpm/script.log logs/libmodplug-0.8.8.5-8.fc25.src.rpm/script.log logs/libzhuyin-1.1.1-1.fc25.src.rpm/script.log sent 824,900 bytes received 43,536 bytes 157,897.45 bytes/sec total size is 760,765,479 speedup is 876.02 sending incremental file list sent 71 bytes received 11 bytes 32.80 bytes/sec total size is 6,770 speedup is 82.56 ~/d/fedora-riscv-autobuild