OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 16:07:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libXfixes-5.0.3-5.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libXfixes.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.9 MB/s | 895 kB 00:04 ETA Local RPMS 12% [== ] 2.9 MB/s | 1.7 MB 00:04 ETA Local RPMS 19% [===- ] 2.9 MB/s | 2.8 MB 00:03 ETA Local RPMS 27% [===== ] 2.9 MB/s | 3.8 MB 00:03 ETA Local RPMS 34% [======- ] 3.0 MB/s | 4.8 MB 00:03 ETA Local RPMS 41% [======== ] 3.0 MB/s | 5.8 MB 00:02 ETA Local RPMS 49% [=========- ] 3.0 MB/s | 6.9 MB 00:02 ETA Local RPMS 55% [=========== ] 2.8 MB/s | 7.7 MB 00:02 ETA Local RPMS 62% [============ ] 2.8 MB/s | 8.7 MB 00:01 ETA Local RPMS 69% [=============- ] 2.9 MB/s | 9.7 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 11 MB 00:01 ETA Local RPMS 83% [================- ] 2.9 MB/s | 12 MB 00:00 ETA Local RPMS 90% [================== ] 2.9 MB/s | 13 MB 00:00 ETA Local RPMS 97% [=================== ] 2.9 MB/s | 14 MB 00:00 ETA Local RPMS 2.4 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:37 ago on Thu Feb 22 16:07:36 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k libX11-devel riscv64 1.6.5-5.fc28 local 985 k libXext-devel riscv64 1.3.3-8.fc28 local 79 k libtool riscv64 2.4.6-21.fc27 local 707 k xorg-x11-proto-devel noarch 7.7-20.fc25 local 287 k xorg-x11-util-macros noarch 1.19.0-5.fc24 local 54 k Installing dependencies: emacs-filesystem noarch 1:25.3-5.fc28 local 67 k libX11 riscv64 1.6.5-5.fc28 local 1.8 M libX11-common noarch 1.6.5-5.fc28 local 166 k libX11-xcb riscv64 1.6.5-5.fc28 local 34 k libXau riscv64 1.0.8-11.fc28 local 42 k libXau-devel riscv64 1.0.8-11.fc28 local 19 k libXext riscv64 1.3.3-8.fc28 local 157 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libxcb riscv64 1.12-5.0.riscv64.fc28 local 708 k libxcb-devel riscv64 1.12-5.0.riscv64.fc28 local 1.0 M m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k tar riscv64 2:1.29-7.fc27 local 805 k Transaction Summary ================================================================================ Install 56 Packages Total download size: 23 M Installed size: 77 M Downloading Packages: (1/56): libX11-devel 0% [ ] --- B/s | 0 B --:-- ETA (1/56): xorg-x11-util-macros-1.19.0-5.fc24.noar 729 kB/s | 54 kB 00:00 (2-3/56): libXext-de 0% [ ] 1.6 MB/s | 182 kB 00:14 ETA (2/56): libXext-devel-1.3.3-8.fc28.riscv64.rpm 526 kB/s | 79 kB 00:00 (3-4/56): libX11-1.6 0% [ ] 1.6 MB/s | 229 kB 00:14 ETA (3/56): libX11-xcb-1.6.5-5.fc28.riscv64.rpm 567 kB/s | 34 kB 00:00 (4-5/56): libX11-1.6 1% [ ] 1.6 MB/s | 358 kB 00:14 ETA (4-6/56): libxcb-dev 5% [= ] 1.6 MB/s | 1.2 MB 00:13 ETA (4-6/56): libxcb-dev 9% [=- ] 1.7 MB/s | 2.1 MB 00:12 ETA (4/56): libX11-devel-1.6.5-5.fc28.riscv64.rpm 799 kB/s | 985 kB 00:01 (5-6/56): libX11-1.6 12% [== ] 1.7 MB/s | 2.9 MB 00:11 ETA (5/56): libXext-1.3.3-8.fc28.riscv64.rpm 887 kB/s | 157 kB 00:00 (6-7/56): libX11-1.6 14% [==- ] 1.8 MB/s | 3.3 MB 00:11 ETA (6/56): libxcb-devel-1.12-5.0.riscv64.fc28.risc 778 kB/s | 1.0 MB 00:01 (7-8/56): libX11-1.6 15% [=== ] 1.7 MB/s | 3.5 MB 00:11 ETA (7/56): libX11-common-1.6.5-5.fc28.noarch.rpm 459 kB/s | 166 kB 00:00 (8-9/56): libX11-1.6 16% [=== ] 1.7 MB/s | 3.8 MB 00:11 ETA (8-10/56): libxcb-1. 20% [==== ] 1.8 MB/s | 4.7 MB 00:10 ETA (8/56): libX11-1.6.5-5.fc28.riscv64.rpm 746 kB/s | 1.8 MB 00:02 (9-10/56): autoconf- 23% [====- ] 1.8 MB/s | 5.4 MB 00:10 ETA (9/56): libxcb-1.12-5.0.riscv64.fc28.riscv64.rp 693 kB/s | 708 kB 00:01 (10-11/56): emacs-fi 23% [====- ] 1.8 MB/s | 5.6 MB 00:10 ETA (10/56): emacs-filesystem-25.3-5.fc28.noarch.rp 336 kB/s | 67 kB 00:00 (11-12/56): automake 24% [====- ] 1.8 MB/s | 5.6 MB 00:10 ETA (11/56): autoconf-2.69-26.fc28.noarch.rpm 630 kB/s | 709 kB 00:01 (12-13/56): libtool- 25% [===== ] 1.7 MB/s | 5.9 MB 00:10 ETA (12-14/56): tar-1.29 28% [=====- ] 1.8 MB/s | 6.7 MB 00:09 ETA (12/56): automake-1.15.1-3.fc28.noarch.rpm 775 kB/s | 706 kB 00:00 (13-14/56): libtool- 32% [======- ] 1.9 MB/s | 7.7 MB 00:08 ETA (13/56): libtool-2.4.6-21.fc27.riscv64.rpm 712 kB/s | 707 kB 00:00 (14-15/56): tar-1.29 32% [======- ] 1.8 MB/s | 7.7 MB 00:08 ETA (14/56): libXau-devel-1.0.8-11.fc28.riscv64.rpm 425 kB/s | 19 kB 00:00 (15-16/56): tar-1.29 33% [======- ] 1.8 MB/s | 7.8 MB 00:08 ETA (15/56): libXau-1.0.8-11.fc28.riscv64.rpm 731 kB/s | 42 kB 00:00 (16-17/56): tar-1.29 33% [======- ] 1.8 MB/s | 7.9 MB 00:08 ETA (16/56): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 540 kB/s | 14 kB 00:00 (17-18/56): tar-1.29 34% [======- ] 1.8 MB/s | 8.0 MB 00:08 ETA (17/56): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 585 kB/s | 15 kB 00:00 (18-19/56): tar-1.29 34% [======- ] 1.8 MB/s | 8.0 MB 00:08 ETA (18/56): pkgconf-1.4.1-1.fc27.riscv64.rpm 658 kB/s | 35 kB 00:00 (19-20/56): xorg-x11 34% [======- ] 1.8 MB/s | 8.1 MB 00:08 ETA (19/56): tar-1.29-7.fc27.riscv64.rpm 629 kB/s | 805 kB 00:01 (20-21/56): libpkgco 35% [======= ] 1.7 MB/s | 8.2 MB 00:08 ETA (20/56): libpkgconf-1.4.1-1.fc27.riscv64.rpm 331 kB/s | 74 kB 00:00 (21-22/56): perl-Car 35% [======= ] 1.7 MB/s | 8.3 MB 00:08 ETA (21/56): xorg-x11-proto-devel-7.7-20.fc25.noarc 368 kB/s | 287 kB 00:00 (22-23/56): perl-Exp 36% [======= ] 1.7 MB/s | 8.4 MB 00:08 ETA (22/56): perl-Carp-1.42-408.fc27.0.riscv64.noar 387 kB/s | 84 kB 00:00 (23-24/56): perl-Fil 36% [======= ] 1.7 MB/s | 8.5 MB 00:08 ETA (23/56): perl-File-Path-2.15-1.fc27.noarch.rpm 366 kB/s | 37 kB 00:00 (24-25/56): perl-Get 36% [======= ] 1.7 MB/s | 8.6 MB 00:08 ETA (24/56): perl-Exporter-5.72-408.fc27.0.riscv64. 339 kB/s | 87 kB 00:00 (25-26/56): perl-Thr 36% [======= ] 1.7 MB/s | 8.6 MB 00:08 ETA (25/56): perl-Getopt-Long-2.50-3.fc27.noarch.rp 385 kB/s | 61 kB 00:00 (26-27/56): perl-con 36% [======= ] 1.7 MB/s | 8.6 MB 00:08 ETA (26/56): perl-Thread-Queue-3.12-408.fc27.0.risc 441 kB/s | 77 kB 00:00 (27-28/56): perl-Err 37% [=======- ] 1.7 MB/s | 8.8 MB 00:08 ETA (27/56): perl-constant-1.33-408.fc27.0.riscv64. 445 kB/s | 79 kB 00:00 (28-29/56): perl-lib 37% [=======- ] 1.7 MB/s | 8.8 MB 00:08 ETA (28/56): perl-Errno-1.28-408.fc28.1.riscv64.ris 393 kB/s | 73 kB 00:00 (29-30/56): perl-int 37% [=======- ] 1.7 MB/s | 8.9 MB 00:08 ETA (29/56): perl-IO-1.38-408.fc28.1.riscv64.riscv6 848 kB/s | 176 kB 00:00 (30-31/56): perl-lib 40% [======== ] 1.7 MB/s | 9.4 MB 00:08 ETA (30/56): perl-PathTools-3.67-408.fc27.0.riscv64 863 kB/s | 166 kB 00:00 (31-32/56): perl-lib 42% [======== ] 1.7 MB/s | 9.9 MB 00:07 ETA (31/56): perl-threads-2.21-1.fc27.riscv64.rpm 843 kB/s | 104 kB 00:00 (32-33/56): perl-lib 43% [========- ] 1.7 MB/s | 10 MB 00:07 ETA (32/56): perl-Text-ParseWords-3.30-408.fc27.0.r 752 kB/s | 73 kB 00:00 (33-34/56): perl-lib 44% [========- ] 1.7 MB/s | 10 MB 00:07 ETA (33-35/56): perl-int 48% [=========- ] 1.8 MB/s | 11 MB 00:06 ETA (33/56): m4-1.4.18-5.fc28.riscv64.rpm 907 kB/s | 369 kB 00:00 (34-35/56): perl-lib 49% [=========- ] 1.8 MB/s | 12 MB 00:06 ETA (34/56): perl-Data-Dumper-2.167-408.fc27.0.risc 818 kB/s | 149 kB 00:00 (35-36/56): perl-int 51% [========== ] 1.8 MB/s | 12 MB 00:06 ETA (35/56): perl-Text-Tabs+Wrap-2013.0523-408.fc27 864 kB/s | 80 kB 00:00 (36-37/56): perl-int 52% [==========- ] 1.8 MB/s | 12 MB 00:06 ETA (36/56): perl-parent-0.236-408.fc27.0.riscv64.n 753 kB/s | 71 kB 00:00 (37-38/56): perl-int 53% [==========- ] 1.8 MB/s | 12 MB 00:05 ETA (37/56): perl-Scalar-List-Utils-1.48-1.fc27.ris 876 kB/s | 119 kB 00:00 (38-39/56): perl-int 55% [=========== ] 1.8 MB/s | 13 MB 00:05 ETA (38/56): perl-Unicode-Normalize-1.25-408.fc27.0 871 kB/s | 164 kB 00:00 (39-40/56): perl-int 57% [=========== ] 1.9 MB/s | 13 MB 00:05 ETA (39/56): perl-macros-5.26.1-408.fc28.1.riscv64. 761 kB/s | 69 kB 00:00 (40-41/56): perl-int 58% [===========- ] 1.9 MB/s | 14 MB 00:05 ETA (40/56): perl-threads-shared-1.58-1.fc27.riscv6 859 kB/s | 91 kB 00:00 (41-42/56): perl-lib 59% [===========- ] 1.9 MB/s | 14 MB 00:05 ETA (41/56): perl-Socket-2.027-1.fc27.riscv64.rpm 870 kB/s | 95 kB 00:00 (42-43/56): perl-lib 60% [============ ] 1.9 MB/s | 14 MB 00:04 ETA (42/56): perl-Pod-Usage-1.69-408.fc27.0.riscv64 828 kB/s | 89 kB 00:00 (43-44/56): perl-lib 61% [============ ] 1.9 MB/s | 14 MB 00:04 ETA (43/56): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 879 kB/s | 139 kB 00:00 (44-45/56): perl-lib 63% [============- ] 1.9 MB/s | 15 MB 00:04 ETA (44/56): perl-podlators-4.09-408.fc27.0.riscv64 903 kB/s | 157 kB 00:00 (45-46/56): perl-lib 65% [============= ] 1.9 MB/s | 15 MB 00:04 ETA (45/56): perl-File-Temp-0.230.400-408.fc27.0.ri 813 kB/s | 103 kB 00:00 (46-47/56): perl-lib 66% [============= ] 1.9 MB/s | 16 MB 00:04 ETA (46/56): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 799 kB/s | 97 kB 00:00 (47-48/56): perl-lib 68% [=============- ] 1.9 MB/s | 16 MB 00:03 ETA (47/56): perl-Pod-Simple-3.35-408.fc27.0.riscv6 924 kB/s | 271 kB 00:00 (48-49/56): perl-int 71% [============== ] 2.0 MB/s | 17 MB 00:03 ETA (48-50/56): perl-int 75% [=============== ] 2.0 MB/s | 18 MB 00:02 ETA (48-50/56): perl-int 79% [===============- ] 2.1 MB/s | 19 MB 00:02 ETA (48/56): perl-libs-5.26.1-408.fc28.1.riscv64.ri 740 kB/s | 3.3 MB 00:04 (49-50/56): perl-int 79% [===============- ] 2.1 MB/s | 19 MB 00:02 ETA (49/56): perl-Time-Local-1.250-394.fc27.noarch. 713 kB/s | 30 kB 00:00 (50-51/56): perl-int 79% [===============- ] 2.1 MB/s | 19 MB 00:02 ETA (50/56): perl-MIME-Base64-3.15-408.fc27.0.riscv 930 kB/s | 111 kB 00:00 (51-52/56): perl-int 81% [================ ] 2.1 MB/s | 19 MB 00:02 ETA (51/56): perl-Storable-2.62-408.fc27.0.riscv64. 923 kB/s | 205 kB 00:00 (52-53/56): perl-int 83% [================- ] 2.1 MB/s | 20 MB 00:01 ETA (52/56): perl-Term-ANSIColor-4.06-408.fc27.0.ri 839 kB/s | 94 kB 00:00 (53-54/56): perl-int 84% [================- ] 2.1 MB/s | 20 MB 00:01 ETA (53/56): perl-Term-Cap-1.17-408.fc27.0.riscv64. 838 kB/s | 78 kB 00:00 (54-55/56): perl-Enc 85% [================= ] 2.1 MB/s | 20 MB 00:01 ETA (54/56): perl-Pod-Escapes-1.07-408.fc27.0.riscv 764 kB/s | 77 kB 00:00 (55-56/56): perl-Enc 86% [================= ] 2.1 MB/s | 20 MB 00:01 ETA (55/56): perl-Encode-2.94-16.fc27.riscv64.rpm 689 kB/s | 1.4 MB 00:02 (56/56): perl-interp 89% [=================- ] 2.0 MB/s | 21 MB 00:01 ETA (56/56): perl-interp 92% [==================- ] 2.1 MB/s | 22 MB 00:00 ETA (56/56): perl-interp 96% [=================== ] 2.1 MB/s | 23 MB 00:00 ETA (56/56): perl-interpreter-5.26.1-408.fc28.1.ris 938 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 23 MB 00:12 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/56 Installing : perl-Exporter-5.72-408.f [===== ] 1/56 Installing : perl-Exporter-5.72-408.f [======= ] 1/56 Installing : perl-Exporter-5.72-408.f [==================== ] 1/56 Installing : perl-Exporter-5.72-408.f [======================== ] 1/56 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/56 Installing : perl-libs-4:5.26.1-408.f [ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/56 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/56 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/56random: crng init done Installing : perl-Carp-1.42-408.fc27. [ ] 3/56 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/56 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/56 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/56 Installing : perl-Scalar-List-Utils-3 [ ] 4/56 Installing : perl-Scalar-List-Utils-3 [= ] 4/56 Installing : perl-Scalar-List-Utils-3 [== ] 4/56 Installing : perl-Scalar-List-Utils-3 [=== ] 4/56 Installing : perl-Scalar-List-Utils-3 [===== ] 4/56 Installing : perl-Scalar-List-Utils-3 [======== ] 4/56 Installing : perl-Scalar-List-Utils-3 [========== ] 4/56 Installing : perl-Scalar-List-Utils-3 [============= ] 4/56 Installing : perl-Scalar-List-Utils-3 [================ ] 4/56 Installing : perl-Scalar-List-Utils-3 [================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/56 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/56 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/56 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/56 Installing : perl-Text-ParseWords-3.3 [ ] 5/56 Installing : perl-Text-ParseWords-3.3 [======= ] 5/56 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/56 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/56 Installing : libXau-1.0.8-11.fc28.ris [ ] 6/56 Installing : libXau-1.0.8-11.fc28.ris [========= ] 6/56 Installing : libXau-1.0.8-11.fc28.ris [============= ] 6/56 Installing : libXau-1.0.8-11.fc28.ris [====================== ] 6/56 Installing : libXau-1.0.8-11.fc28.ris [======================== ] 6/56 Installing : libXau-1.0.8-11.fc28.riscv64 6/56 Running scriptlet: libXau-1.0.8-11.fc28.riscv64 6/56 Installing : libxcb-1.12-5.0.riscv64. [ ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [=== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [==== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [===== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [====== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [======= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [======== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [========= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [========== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [=========== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [============ ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [============= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [============== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [=============== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [================ ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [================= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [=================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [==================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [===================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [====================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [======================= ] 7/56 Installing : libxcb-1.12-5.0.riscv64. [======================== ] 7/56 Installing : libxcb-1.12-5.0.riscv64.fc28.riscv64 7/56 Running scriptlet: libxcb-1.12-5.0.riscv64.fc28.riscv64 7/56 Installing : perl-Term-ANSIColor-4.06 [ ] 8/56 Installing : perl-Term-ANSIColor-4.06 [==== ] 8/56 Installing : perl-Term-ANSIColor-4.06 [================== ] 8/56 Installing : perl-Term-ANSIColor-4.06 [======================== ] 8/56 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 8/56 Installing : perl-macros-4:5.26.1-408 [ ] 9/56 Installing : perl-macros-4:5.26.1-408 [======================== ] 9/56 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 9/56 Installing : perl-constant-1.33-408.f [ ] 10/56 Installing : perl-constant-1.33-408.f [======= ] 10/56 Installing : perl-constant-1.33-408.f [======================== ] 10/56 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 10/56 Installing : perl-Errno-1.28-408.fc28 [ ] 11/56 Installing : perl-Errno-1.28-408.fc28 [================= ] 11/56 Installing : perl-Errno-1.28-408.fc28 [======================== ] 11/56 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 11/56 Installing : perl-File-Path-2.15-1.fc [ ] 12/56 Installing : perl-File-Path-2.15-1.fc [==== ] 12/56 Installing : perl-File-Path-2.15-1.fc [======== ] 12/56 Installing : perl-File-Path-2.15-1.fc [==================== ] 12/56 Installing : perl-File-Path-2.15-1.fc [======================== ] 12/56 Installing : perl-File-Path-2.15-1.fc27.noarch 12/56 Installing : perl-PathTools-3.67-408. [ ] 13/56 Installing : perl-PathTools-3.67-408. [== ] 13/56 Installing : perl-PathTools-3.67-408. [=== ] 13/56 Installing : perl-PathTools-3.67-408. [==== ] 13/56 Installing : perl-PathTools-3.67-408. [======= ] 13/56 Installing : perl-PathTools-3.67-408. [========= ] 13/56 Installing : perl-PathTools-3.67-408. [=========== ] 13/56 Installing : perl-PathTools-3.67-408. [============== ] 13/56 Installing : perl-PathTools-3.67-408. [================== ] 13/56 Installing : perl-PathTools-3.67-408. [==================== ] 13/56 Installing : perl-PathTools-3.67-408. [===================== ] 13/56 Installing : perl-PathTools-3.67-408. [====================== ] 13/56 Installing : perl-PathTools-3.67-408. [======================= ] 13/56 Installing : perl-PathTools-3.67-408. [======================== ] 13/56 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 13/56 Installing : perl-threads-shared-1.58 [ ] 14/56 Installing : perl-threads-shared-1.58 [=== ] 14/56 Installing : perl-threads-shared-1.58 [======= ] 14/56 Installing : perl-threads-shared-1.58 [========== ] 14/56 Installing : perl-threads-shared-1.58 [============== ] 14/56 Installing : perl-threads-shared-1.58 [================= ] 14/56 Installing : perl-threads-shared-1.58 [==================== ] 14/56 Installing : perl-threads-shared-1.58 [======================= ] 14/56 Installing : perl-threads-shared-1.58 [======================== ] 14/56 Installing : perl-threads-shared-1.58-1.fc27.riscv64 14/56 Installing : perl-threads-1:2.21-1.fc [ ] 15/56 Installing : perl-threads-1:2.21-1.fc [=== ] 15/56 Installing : perl-threads-1:2.21-1.fc [====== ] 15/56 Installing : perl-threads-1:2.21-1.fc [========= ] 15/56 Installing : perl-threads-1:2.21-1.fc [============= ] 15/56 Installing : perl-threads-1:2.21-1.fc [================ ] 15/56 Installing : perl-threads-1:2.21-1.fc [================== ] 15/56 Installing : perl-threads-1:2.21-1.fc [===================== ] 15/56 Installing : perl-threads-1:2.21-1.fc [====================== ] 15/56 Installing : perl-threads-1:2.21-1.fc [======================= ] 15/56 Installing : perl-threads-1:2.21-1.fc [======================== ] 15/56 Installing : perl-threads-1:2.21-1.fc27.riscv64 15/56 Installing : perl-Text-Tabs+Wrap-2013 [ ] 16/56 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 16/56 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 16/56 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 16/56 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 16/56 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 16/56 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 16/56 Installing : perl-parent-1:0.236-408. [ ] 17/56 Installing : perl-parent-1:0.236-408. [============ ] 17/56 Installing : perl-parent-1:0.236-408. [======================== ] 17/56 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 17/56 Installing : perl-Unicode-Normalize-1 [ ] 18/56 Installing : perl-Unicode-Normalize-1 [= ] 18/56 Installing : perl-Unicode-Normalize-1 [== ] 18/56 Installing : perl-Unicode-Normalize-1 [=== ] 18/56 Installing : perl-Unicode-Normalize-1 [==== ] 18/56 Installing : perl-Unicode-Normalize-1 [===== ] 18/56 Installing : perl-Unicode-Normalize-1 [====== ] 18/56 Installing : perl-Unicode-Normalize-1 [======= ] 18/56 Installing : perl-Unicode-Normalize-1 [======== ] 18/56 Installing : perl-Unicode-Normalize-1 [========= ] 18/56 Installing : perl-Unicode-Normalize-1 [========== ] 18/56 Installing : perl-Unicode-Normalize-1 [============ ] 18/56 Installing : perl-Unicode-Normalize-1 [============= ] 18/56 Installing : perl-Unicode-Normalize-1 [============== ] 18/56 Installing : perl-Unicode-Normalize-1 [=============== ] 18/56 Installing : perl-Unicode-Normalize-1 [================ ] 18/56 Installing : perl-Unicode-Normalize-1 [================= ] 18/56 Installing : perl-Unicode-Normalize-1 [================== ] 18/56 Installing : perl-Unicode-Normalize-1 [=================== ] 18/56 Installing : perl-Unicode-Normalize-1 [==================== ] 18/56 Installing : perl-Unicode-Normalize-1 [===================== ] 18/56 Installing : perl-Unicode-Normalize-1 [====================== ] 18/56 Installing : perl-Unicode-Normalize-1 [======================= ] 18/56 Installing : perl-Unicode-Normalize-1 [======================== ] 18/56 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 18/56 Installing : perl-interpreter-4:5.26. [ ] 19/56 Installing : perl-interpreter-4:5.26. [= ] 19/56 Installing : perl-interpreter-4:5.26. [== ] 19/56 Installing : perl-interpreter-4:5.26. [=== ] 19/56 Installing : perl-interpreter-4:5.26. [==== ] 19/56 Installing : perl-interpreter-4:5.26. [===== ] 19/56 Installing : perl-interpreter-4:5.26. [====== ] 19/56 Installing : perl-interpreter-4:5.26. [======= ] 19/56 Installing : perl-interpreter-4:5.26. [======== ] 19/56 Installing : perl-interpreter-4:5.26. [========= ] 19/56 Installing : perl-interpreter-4:5.26. [========== ] 19/56 Installing : perl-interpreter-4:5.26. [=========== ] 19/56 Installing : perl-interpreter-4:5.26. [============ ] 19/56 Installing : perl-interpreter-4:5.26. [============= ] 19/56 Installing : perl-interpreter-4:5.26. [============== ] 19/56 Installing : perl-interpreter-4:5.26. [=============== ] 19/56 Installing : perl-interpreter-4:5.26. [================ ] 19/56 Installing : perl-interpreter-4:5.26. [================= ] 19/56 Installing : perl-interpreter-4:5.26. [================== ] 19/56 Installing : perl-interpreter-4:5.26. [=================== ] 19/56 Installing : perl-interpreter-4:5.26. [==================== ] 19/56 Installing : perl-interpreter-4:5.26. [===================== ] 19/56 Installing : perl-interpreter-4:5.26. [====================== ] 19/56 Installing : perl-interpreter-4:5.26. [======================= ] 19/56 Installing : perl-interpreter-4:5.26. [======================== ] 19/56 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 19/56 Installing : perl-Socket-4:2.027-1.fc [ ] 20/56 Installing : perl-Socket-4:2.027-1.fc [=== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [======= ] 20/56 Installing : perl-Socket-4:2.027-1.fc [========== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [============== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [================= ] 20/56 Installing : perl-Socket-4:2.027-1.fc [==================== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [===================== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [====================== ] 20/56 Installing : perl-Socket-4:2.027-1.fc [======================= ] 20/56 Installing : perl-Socket-4:2.027-1.fc [======================== ] 20/56 Installing : perl-Socket-4:2.027-1.fc27.riscv64 20/56 Installing : perl-IO-1.38-408.fc28.1. [ ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [= ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [=== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [==== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [===== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [====== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [======= ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [======== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [============== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [================= ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 21/56 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 21/56 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 21/56 Installing : perl-File-Temp-0.230.400 [ ] 22/56 Installing : perl-File-Temp-0.230.400 [=== ] 22/56 Installing : perl-File-Temp-0.230.400 [============ ] 22/56 Installing : perl-File-Temp-0.230.400 [===================== ] 22/56 Installing : perl-File-Temp-0.230.400 [======================== ] 22/56 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 22/56 Installing : perl-Storable-1:2.62-408 [ ] 23/56 Installing : perl-Storable-1:2.62-408 [== ] 23/56 Installing : perl-Storable-1:2.62-408 [==== ] 23/56 Installing : perl-Storable-1:2.62-408 [====== ] 23/56 Installing : perl-Storable-1:2.62-408 [======== ] 23/56 Installing : perl-Storable-1:2.62-408 [========== ] 23/56 Installing : perl-Storable-1:2.62-408 [============ ] 23/56 Installing : perl-Storable-1:2.62-408 [============== ] 23/56 Installing : perl-Storable-1:2.62-408 [================ ] 23/56 Installing : perl-Storable-1:2.62-408 [================== ] 23/56 Installing : perl-Storable-1:2.62-408 [==================== ] 23/56 Installing : perl-Storable-1:2.62-408 [====================== ] 23/56 Installing : perl-Storable-1:2.62-408 [======================== ] 23/56 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 23/56 Installing : perl-MIME-Base64-3.15-40 [ ] 24/56 Installing : perl-MIME-Base64-3.15-40 [= ] 24/56 Installing : perl-MIME-Base64-3.15-40 [== ] 24/56 Installing : perl-MIME-Base64-3.15-40 [========== ] 24/56 Installing : perl-MIME-Base64-3.15-40 [================== ] 24/56 Installing : perl-MIME-Base64-3.15-40 [======================= ] 24/56 Installing : perl-MIME-Base64-3.15-40 [======================== ] 24/56 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 24/56 Installing : perl-Term-Cap-1.17-408.f [ ] 25/56 Installing : perl-Term-Cap-1.17-408.f [==== ] 25/56 Installing : perl-Term-Cap-1.17-408.f [======================== ] 25/56 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 25/56 Installing : perl-Pod-Escapes-1:1.07- [ ] 26/56 Installing : perl-Pod-Escapes-1:1.07- [==== ] 26/56 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 26/56 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 26/56 Installing : perl-Time-Local-1:1.250- [ ] 27/56 Installing : perl-Time-Local-1:1.250- [= ] 27/56 Installing : perl-Time-Local-1:1.250- [===== ] 27/56 Installing : perl-Time-Local-1:1.250- [======== ] 27/56 Installing : perl-Time-Local-1:1.250- [========= ] 27/56 Installing : perl-Time-Local-1:1.250- [================= ] 27/56 Installing : perl-Time-Local-1:1.250- [=================== ] 27/56 Installing : perl-Time-Local-1:1.250- [======================== ] 27/56 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 27/56 Installing : perl-HTTP-Tiny-0.070-408 [ ] 28/56 Installing : perl-HTTP-Tiny-0.070-408 [== ] 28/56 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 28/56 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 28/56 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 28/56 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 28/56 Installing : perl-Pod-Simple-1:3.35-4 [ ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 29/56 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 29/56 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 29/56 Installing : perl-Encode-4:2.94-16.fc [ ] 30/56 Installing : perl-Encode-4:2.94-16.fc [= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [=== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [==== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [===== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [====== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [======= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [======== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [========= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [========== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [=========== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [============ ] 30/56 Installing : perl-Encode-4:2.94-16.fc [============= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [============== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [=============== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [================ ] 30/56 Installing : perl-Encode-4:2.94-16.fc [================= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [=================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [==================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [===================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [====================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc [======================= ] 30/56 Installing : perl-Encode-4:2.94-16.fc [======================== ] 30/56 Installing : perl-Encode-4:2.94-16.fc27.riscv64 30/56 Installing : perl-Getopt-Long-1:2.50- [ ] 31/56 Installing : perl-Getopt-Long-1:2.50- [=== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [==== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [===== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [====== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [======= ] 31/56 Installing : perl-Getopt-Long-1:2.50- [========= ] 31/56 Installing : perl-Getopt-Long-1:2.50- [=============== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [===================== ] 31/56 Installing : perl-Getopt-Long-1:2.50- [======================== ] 31/56 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 31/56 Installing : perl-Pod-Usage-4:1.69-40 [ ] 32/56 Installing : perl-Pod-Usage-4:1.69-40 [== ] 32/56 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 32/56 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 32/56 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 32/56 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 32/56 Installing : perl-podlators-4.09-408. [ ] 33/56 Installing : perl-podlators-4.09-408. [= ] 33/56 Installing : perl-podlators-4.09-408. [== ] 33/56 Installing : perl-podlators-4.09-408. [=== ] 33/56 Installing : perl-podlators-4.09-408. [==== ] 33/56 Installing : perl-podlators-4.09-408. [===== ] 33/56 Installing : perl-podlators-4.09-408. [====== ] 33/56 Installing : perl-podlators-4.09-408. [======= ] 33/56 Installing : perl-podlators-4.09-408. [=========== ] 33/56 Installing : perl-podlators-4.09-408. [=============== ] 33/56 Installing : perl-podlators-4.09-408. [================ ] 33/56 Installing : perl-podlators-4.09-408. [================= ] 33/56 Installing : perl-podlators-4.09-408. [===================== ] 33/56 Installing : perl-podlators-4.09-408. [====================== ] 33/56 Installing : perl-podlators-4.09-408. [======================= ] 33/56 Installing : perl-podlators-4.09-408. [======================== ] 33/56 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 33/56 Installing : perl-Pod-Perldoc-3.28-40 [ ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [= ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 34/56 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 34/56 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 34/56 Installing : perl-Thread-Queue-3.12-4 [ ] 35/56 Installing : perl-Thread-Queue-3.12-4 [===== ] 35/56 Installing : perl-Thread-Queue-3.12-4 [====== ] 35/56 Installing : perl-Thread-Queue-3.12-4 [======================== ] 35/56 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 35/56 Installing : perl-Data-Dumper-2.167-4 [ ] 36/56 Installing : perl-Data-Dumper-2.167-4 [=== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [==== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [======== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [============ ] 36/56 Installing : perl-Data-Dumper-2.167-4 [=============== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [=================== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [====================== ] 36/56 Installing : perl-Data-Dumper-2.167-4 [======================= ] 36/56 Installing : perl-Data-Dumper-2.167-4 [======================== ] 36/56 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 36/56 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 37/56 Installing : m4-1.4.18-5.fc28.riscv64 37/56 Running scriptlet: m4-1.4.18-5.fc28.riscv64 37/56 Installing : libpkgconf-1.4.1-1.fc27. [ ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 38/56 Installing : libpkgconf-1.4.1-1.fc27.riscv64 38/56 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 38/56 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 39/56 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 39/56 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 39/56 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 39/56 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 39/56 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 39/56 Installing : pkgconf-1.4.1-1.fc27.riscv64 39/56 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 40/56 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 40/56 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 40/56 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 40/56 Installing : pkgconf-pkg-config-1.4.1 [ ] 41/56 Installing : pkgconf-pkg-config-1.4.1 [==== ] 41/56 Installing : pkgconf-pkg-config-1.4.1 [===== ] 41/56 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 41/56 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 41/56 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 41/56 Installing : xorg-x11-proto-devel-7.7 [ ] 42/56 Installing : xorg-x11-proto-devel-7.7 [= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [=== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [==== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [===== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [====== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [======= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [======== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [========= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [========== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [=========== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [============ ] 42/56 Installing : xorg-x11-proto-devel-7.7 [============= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [============== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [=============== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [================ ] 42/56 Installing : xorg-x11-proto-devel-7.7 [================= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [================== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [=================== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [==================== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [===================== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [====================== ] 42/56 Installing : xorg-x11-proto-devel-7.7 [======================= ] 42/56 Installing : xorg-x11-proto-devel-7.7 [======================== ] 42/56 Installing : xorg-x11-proto-devel-7.7-20.fc25.noarch 42/56 Installing : libXau-devel-1.0.8-11.fc [ ] 43/56 Installing : libXau-devel-1.0.8-11.fc [=========== ] 43/56 Installing : libXau-devel-1.0.8-11.fc [============ ] 43/56 Installing : libXau-devel-1.0.8-11.fc [============= ] 43/56 Installing : libXau-devel-1.0.8-11.fc [==================== ] 43/56 Installing : libXau-devel-1.0.8-11.fc [===================== ] 43/56 Installing : libXau-devel-1.0.8-11.fc [====================== ] 43/56 Installing : libXau-devel-1.0.8-11.fc [======================= ] 43/56 Installing : libXau-devel-1.0.8-11.fc [======================== ] 43/56 Installing : libXau-devel-1.0.8-11.fc28.riscv64 43/56 Installing : libxcb-devel-1.12-5.0.ri [ ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [=== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [==== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [===== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [====== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [======= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [======== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [========= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [========== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [=========== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [============ ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [============= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [============== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [=============== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [================ ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [================= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [================== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [=================== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [==================== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [===================== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [====================== ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [======================= ] 44/56 Installing : libxcb-devel-1.12-5.0.ri [======================== ] 44/56 Installing : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 44/56 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 45/56 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 45/56 Installing : tar-2:1.29-7.fc27.riscv64 45/56 Running scriptlet: tar-2:1.29-7.fc27.riscv64 45/56 Installing : emacs-filesystem-1:25.3- [ ] 46/56 Installing : emacs-filesystem-1:25.3- [===== ] 46/56 Installing : emacs-filesystem-1:25.3- [============ ] 46/56 Installing : emacs-filesystem-1:25.3- [=================== ] 46/56 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 46/56 Installing : autoconf-2.69-26.fc28.no [ ] 47/56 Installing : autoconf-2.69-26.fc28.no [= ] 47/56 Installing : autoconf-2.69-26.fc28.no [== ] 47/56 Installing : autoconf-2.69-26.fc28.no [=== ] 47/56 Installing : autoconf-2.69-26.fc28.no [==== ] 47/56 Installing : autoconf-2.69-26.fc28.no [===== ] 47/56 Installing : autoconf-2.69-26.fc28.no [====== ] 47/56 Installing : autoconf-2.69-26.fc28.no [======= ] 47/56 Installing : autoconf-2.69-26.fc28.no [======== ] 47/56 Installing : autoconf-2.69-26.fc28.no [========= ] 47/56 Installing : autoconf-2.69-26.fc28.no [========== ] 47/56 Installing : autoconf-2.69-26.fc28.no [=========== ] 47/56 Installing : autoconf-2.69-26.fc28.no [============ ] 47/56 Installing : autoconf-2.69-26.fc28.no [============= ] 47/56 Installing : autoconf-2.69-26.fc28.no [============== ] 47/56 Installing : autoconf-2.69-26.fc28.no [=============== ] 47/56 Installing : autoconf-2.69-26.fc28.no [================ ] 47/56 Installing : autoconf-2.69-26.fc28.no [================= ] 47/56 Installing : autoconf-2.69-26.fc28.no [================== ] 47/56 Installing : autoconf-2.69-26.fc28.no [=================== ] 47/56 Installing : autoconf-2.69-26.fc28.no [==================== ] 47/56 Installing : autoconf-2.69-26.fc28.no [===================== ] 47/56 Installing : autoconf-2.69-26.fc28.no [====================== ] 47/56 Installing : autoconf-2.69-26.fc28.no [======================= ] 47/56 Installing : autoconf-2.69-26.fc28.no [======================== ] 47/56 Installing : autoconf-2.69-26.fc28.noarch 47/56 Running scriptlet: autoconf-2.69-26.fc28.noarch 47/56 Installing : automake-1.15.1-3.fc28.n [ ] 48/56 Installing : automake-1.15.1-3.fc28.n [= ] 48/56 Installing : automake-1.15.1-3.fc28.n [== ] 48/56 Installing : automake-1.15.1-3.fc28.n [=== ] 48/56 Installing : automake-1.15.1-3.fc28.n [==== ] 48/56 Installing : automake-1.15.1-3.fc28.n [===== ] 48/56 Installing : automake-1.15.1-3.fc28.n [====== ] 48/56 Installing : automake-1.15.1-3.fc28.n [======= ] 48/56 Installing : automake-1.15.1-3.fc28.n [======== ] 48/56 Installing : automake-1.15.1-3.fc28.n [========= ] 48/56 Installing : automake-1.15.1-3.fc28.n [========== ] 48/56 Installing : automake-1.15.1-3.fc28.n [=========== ] 48/56 Installing : automake-1.15.1-3.fc28.n [============ ] 48/56 Installing : automake-1.15.1-3.fc28.n [============= ] 48/56 Installing : automake-1.15.1-3.fc28.n [============== ] 48/56 Installing : automake-1.15.1-3.fc28.n [=============== ] 48/56 Installing : automake-1.15.1-3.fc28.n [================ ] 48/56 Installing : automake-1.15.1-3.fc28.n [================= ] 48/56 Installing : automake-1.15.1-3.fc28.n [================== ] 48/56 Installing : automake-1.15.1-3.fc28.n [=================== ] 48/56 Installing : automake-1.15.1-3.fc28.n [==================== ] 48/56 Installing : automake-1.15.1-3.fc28.n [===================== ] 48/56 Installing : automake-1.15.1-3.fc28.n [====================== ] 48/56 Installing : automake-1.15.1-3.fc28.n [======================= ] 48/56 Installing : automake-1.15.1-3.fc28.n [======================== ] 48/56 Installing : automake-1.15.1-3.fc28.noarch 48/56 Running scriptlet: automake-1.15.1-3.fc28.noarch 48/56 Installing : libtool-2.4.6-21.fc27.ri [ ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [=== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [==== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [===== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [====== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [======= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [======== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [========= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [========== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [============ ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [============= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [============== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [================ ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [================= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [================== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 49/56 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 49/56 Installing : libtool-2.4.6-21.fc27.riscv64 49/56 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 49/56 Installing : libX11-common-1.6.5-5.fc [ ] 50/56 Installing : libX11-common-1.6.5-5.fc [= ] 50/56 Installing : libX11-common-1.6.5-5.fc [== ] 50/56 Installing : libX11-common-1.6.5-5.fc [=== ] 50/56 Installing : libX11-common-1.6.5-5.fc [==== ] 50/56 Installing : libX11-common-1.6.5-5.fc [===== ] 50/56 Installing : libX11-common-1.6.5-5.fc [====== ] 50/56 Installing : libX11-common-1.6.5-5.fc [======= ] 50/56 Installing : libX11-common-1.6.5-5.fc [======== ] 50/56 Installing : libX11-common-1.6.5-5.fc [========= ] 50/56 Installing : libX11-common-1.6.5-5.fc [========== ] 50/56 Installing : libX11-common-1.6.5-5.fc [=========== ] 50/56 Installing : libX11-common-1.6.5-5.fc [============ ] 50/56 Installing : libX11-common-1.6.5-5.fc [============= ] 50/56 Installing : libX11-common-1.6.5-5.fc [============== ] 50/56 Installing : libX11-common-1.6.5-5.fc [=============== ] 50/56 Installing : libX11-common-1.6.5-5.fc [================ ] 50/56 Installing : libX11-common-1.6.5-5.fc [================= ] 50/56 Installing : libX11-common-1.6.5-5.fc [================== ] 50/56 Installing : libX11-common-1.6.5-5.fc [=================== ] 50/56 Installing : libX11-common-1.6.5-5.fc [==================== ] 50/56 Installing : libX11-common-1.6.5-5.fc [===================== ] 50/56 Installing : libX11-common-1.6.5-5.fc [====================== ] 50/56 Installing : libX11-common-1.6.5-5.fc [======================= ] 50/56 Installing : libX11-common-1.6.5-5.fc [======================== ] 50/56 Installing : libX11-common-1.6.5-5.fc28.noarch 50/56 Installing : libX11-1.6.5-5.fc28.risc [ ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [=== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [==== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [===== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [====== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [======= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [======== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [========= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [========== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [=========== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [============ ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [============= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [============== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [=============== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [================ ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [================= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [================== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [=================== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [==================== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [===================== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [====================== ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [======================= ] 51/56 Installing : libX11-1.6.5-5.fc28.risc [======================== ] 51/56 Installing : libX11-1.6.5-5.fc28.riscv64 51/56 Running scriptlet: libX11-1.6.5-5.fc28.riscv64 51/56 Installing : libXext-1.3.3-8.fc28.ris [ ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [= ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [=== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [===== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [====== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [======= ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [======== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [========== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [=========== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [============ ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [============= ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [=============== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [================ ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [================= ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [================== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [==================== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [===================== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [====================== ] 52/56 Installing : libXext-1.3.3-8.fc28.ris [======================== ] 52/56 Installing : libXext-1.3.3-8.fc28.riscv64 52/56 Running scriptlet: libXext-1.3.3-8.fc28.riscv64 52/56 Installing : libX11-xcb-1.6.5-5.fc28. [ ] 53/56 Installing : libX11-xcb-1.6.5-5.fc28. [===================== ] 53/56 Installing : libX11-xcb-1.6.5-5.fc28. [======================== ] 53/56 Installing : libX11-xcb-1.6.5-5.fc28.riscv64 53/56 Installing : libX11-devel-1.6.5-5.fc2 [ ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [=== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [==== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [===== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [====== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [======= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [======== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [========= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [========== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [=========== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [============ ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [============= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [============== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [=============== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [================ ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [================= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [=================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [==================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [===================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [====================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [======================= ] 54/56 Installing : libX11-devel-1.6.5-5.fc2 [======================== ] 54/56 Installing : libX11-devel-1.6.5-5.fc28.riscv64 54/56 Installing : libXext-devel-1.3.3-8.fc [ ] 55/56 Installing : libXext-devel-1.3.3-8.fc [= ] 55/56 Installing : libXext-devel-1.3.3-8.fc [== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [=== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [==== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [===== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [====== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [======== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [========= ] 55/56 Installing : libXext-devel-1.3.3-8.fc [=========== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [============ ] 55/56 Installing : libXext-devel-1.3.3-8.fc [============= ] 55/56 Installing : libXext-devel-1.3.3-8.fc [============== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [=============== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [================ ] 55/56 Installing : libXext-devel-1.3.3-8.fc [================= ] 55/56 Installing : libXext-devel-1.3.3-8.fc [================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [=================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [==================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [===================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [====================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc [======================= ] 55/56 Installing : libXext-devel-1.3.3-8.fc [======================== ] 55/56 Installing : libXext-devel-1.3.3-8.fc28.riscv64 55/56 Installing : xorg-x11-util-macros-1.1 [ ] 56/56 Installing : xorg-x11-util-macros-1.1 [===== ] 56/56 Installing : xorg-x11-util-macros-1.1 [========== ] 56/56 Installing : xorg-x11-util-macros-1.1 [=========== ] 56/56 Installing : xorg-x11-util-macros-1.1 [================ ] 56/56 Installing : xorg-x11-util-macros-1.1 [===================== ] 56/56 Installing : xorg-x11-util-macros-1.1 [====================== ] 56/56 Installing : xorg-x11-util-macros-1.1 [======================== ] 56/56 Installing : xorg-x11-util-macros-1.19.0-5.fc24.noarch 56/56 Running scriptlet: xorg-x11-util-macros-1.19.0-5.fc24.noarch 56/56 Verifying : libX11-devel-1.6.5-5.fc28.riscv64 1/56 Verifying : libXext-devel-1.3.3-8.fc28.riscv64 2/56 Verifying : xorg-x11-util-macros-1.19.0-5.fc24.noarch 3/56 Verifying : libX11-1.6.5-5.fc28.riscv64 4/56 Verifying : libX11-xcb-1.6.5-5.fc28.riscv64 5/56 Verifying : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 6/56 Verifying : libXext-1.3.3-8.fc28.riscv64 7/56 Verifying : libX11-common-1.6.5-5.fc28.noarch 8/56 Verifying : libxcb-1.12-5.0.riscv64.fc28.riscv64 9/56 Verifying : autoconf-2.69-26.fc28.noarch 10/56 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 11/56 Verifying : automake-1.15.1-3.fc28.noarch 12/56 Verifying : libtool-2.4.6-21.fc27.riscv64 13/56 Verifying : tar-2:1.29-7.fc27.riscv64 14/56 Verifying : xorg-x11-proto-devel-7.7-20.fc25.noarch 15/56 Verifying : libXau-devel-1.0.8-11.fc28.riscv64 16/56 Verifying : libXau-1.0.8-11.fc28.riscv64 17/56 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 18/56 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 19/56 Verifying : pkgconf-1.4.1-1.fc27.riscv64 20/56 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 21/56 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 22/56 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 23/56 Verifying : perl-File-Path-2.15-1.fc27.noarch 24/56 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 25/56 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 26/56 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 27/56 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 28/56 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 29/56 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 30/56 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 31/56 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 32/56 Verifying : perl-threads-1:2.21-1.fc27.riscv64 33/56 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 34/56 Verifying : m4-1.4.18-5.fc28.riscv64 35/56 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 36/56 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 37/56 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 38/56 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 39/56 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 40/56 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 41/56 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 42/56 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 43/56 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 44/56 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 45/56 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 46/56 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 47/56 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 48/56 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 49/56 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 50/56 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 51/56 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 52/56 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 53/56 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 54/56 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 55/56 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 56/56 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 libX11-devel.riscv64 1.6.5-5.fc28 libXext-devel.riscv64 1.3.3-8.fc28 libtool.riscv64 2.4.6-21.fc27 xorg-x11-proto-devel.noarch 7.7-20.fc25 xorg-x11-util-macros.noarch 1.19.0-5.fc24 emacs-filesystem.noarch 1:25.3-5.fc28 libX11.riscv64 1.6.5-5.fc28 libX11-common.noarch 1.6.5-5.fc28 libX11-xcb.riscv64 1.6.5-5.fc28 libXau.riscv64 1.0.8-11.fc28 libXau-devel.riscv64 1.0.8-11.fc28 libXext.riscv64 1.3.3-8.fc28 libpkgconf.riscv64 1.4.1-1.fc27 libxcb.riscv64 1.12-5.0.riscv64.fc28 libxcb-devel.riscv64 1.12-5.0.riscv64.fc28 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 tar.riscv64 2:1.29-7.fc27 Complete! + dnf -y update --best Last metadata expiration check: 0:05:56 ago on Thu Feb 22 16:07:36 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:06:16 ago on Thu Feb 22 16:07:36 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group gawk bash findutils redhat-rpm-config sed tar coreutils grep bzip2 xz which shadow-utils fedora-release util-linux rpm-build unzip info make gzip patch cpio diffutils ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 26 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 784 kB/s | 75 kB 00:00 (2-3/26): diffutils- 1% [ ] 1.6 MB/s | 235 kB 00:07 ETA (2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 292 kB/s | 7.6 kB 00:00 (3-4/26): diffutils- 2% [ ] 1.6 MB/s | 274 kB 00:07 ETA (3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 311 kB/s | 7.8 kB 00:00 (4-5/26): diffutils- 2% [- ] 1.6 MB/s | 314 kB 00:07 ETA (4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 268 kB/s | 6.6 kB 00:00 (5-6/26): diffutils- 2% [- ] 1.5 MB/s | 353 kB 00:07 ETA (5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 370 kB/s | 9.0 kB 00:00 (6-7/26): diffutils- 3% [- ] 1.5 MB/s | 394 kB 00:07 ETA (6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 329 kB/s | 8.0 kB 00:00 (7-8/26): diffutils- 3% [- ] 1.5 MB/s | 434 kB 00:07 ETA (7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 917 kB/s | 235 kB 00:00 (8-9/26): diffutils- 9% [=- ] 1.6 MB/s | 1.1 MB 00:06 ETA (8/26): make-4.2.1-6.fc27.riscv64.rpm 592 kB/s | 486 kB 00:00 (9-10/26): diffutils 11% [== ] 1.6 MB/s | 1.4 MB 00:06 ETA (9/26): which-2.21-4.fc28.riscv64.rpm 738 kB/s | 65 kB 00:00 (10-11/26): diffutil 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (10/26): diffutils-3.6-3.fc28.riscv64.rpm 537 kB/s | 577 kB 00:01 (11-12/26): patch-2. 14% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA (11/26): patch-2.7.5-6.fc27.riscv64.rpm 681 kB/s | 270 kB 00:00 (12-13/26): unzip-6. 20% [==== ] 1.6 MB/s | 2.4 MB 00:05 ETA (12/26): unzip-6.0-36.fc28.riscv64.rpm 805 kB/s | 398 kB 00:00 (13-14/26): xz-5.2.3 24% [====- ] 1.6 MB/s | 2.8 MB 00:05 ETA (13/26): xz-5.2.3-5.fc28.riscv64.rpm 677 kB/s | 212 kB 00:00 (14-15/26): bzip2-1. 25% [===== ] 1.6 MB/s | 3.0 MB 00:05 ETA (14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 485 kB/s | 81 kB 00:00 (15-16/26): elfutils 26% [===== ] 1.6 MB/s | 3.1 MB 00:05 ETA (15/26): file-5.32-3.fc28.riscv64.rpm 736 kB/s | 81 kB 00:00 (16-17/26): elfutils 28% [=====- ] 1.6 MB/s | 3.3 MB 00:05 ETA (16-18/26): zstd-1.3 35% [======= ] 1.7 MB/s | 4.2 MB 00:04 ETA (16/26): zstd-1.3.3-1.fc27.riscv64.rpm 661 kB/s | 1.1 MB 00:01 (17-18/26): elfutils 38% [=======- ] 1.7 MB/s | 4.4 MB 00:04 ETA (17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 310 kB/s | 7.5 kB 00:00 (18-19/26): elfutils 38% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 336 kB/s | 8.2 kB 00:00 (19-20/26): elfutils 38% [=======- ] 1.7 MB/s | 4.5 MB 00:04 ETA (19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 357 kB/s | 8.8 kB 00:00 (20-21/26): elfutils 39% [=======- ] 1.7 MB/s | 4.6 MB 00:04 ETA (20/26): go-srpm-macros-2-11.fc28.noarch.rpm 345 kB/s | 8.4 kB 00:00 (21-22/26): elfutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 395 kB/s | 9.7 kB 00:00 (22-23/26): elfutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (22/26): python-srpm-macros-3-26.fc28.noarch.rp 423 kB/s | 10 kB 00:00 (23-24/26): elfutils 40% [======== ] 1.6 MB/s | 4.7 MB 00:04 ETA (23/26): dwz-0.12-5.fc28.riscv64.rpm 885 kB/s | 108 kB 00:00 (24-25/26): elfutils 42% [========- ] 1.6 MB/s | 5.0 MB 00:04 ETA (24/26): elfutils-0.170-4.fc28.riscv64.rpm 585 kB/s | 791 kB 00:01 (25-26/26): zip-3.0- 45% [========= ] 1.6 MB/s | 5.3 MB 00:03 ETA (25/26): zip-3.0-20.fc28.riscv64.rpm 793 kB/s | 271 kB 00:00 (26/26): binutils-2. 48% [=========- ] 1.6 MB/s | 5.6 MB 00:03 ETA (26/26): binutils-2. 55% [=========== ] 1.7 MB/s | 6.5 MB 00:03 ETA (26/26): binutils-2. 62% [============- ] 1.8 MB/s | 7.3 MB 00:02 ETA (26/26): binutils-2. 70% [============== ] 1.9 MB/s | 8.2 MB 00:01 ETA (26/26): binutils-2. 77% [===============- ] 1.9 MB/s | 9.1 MB 00:01 ETA (26/26): binutils-2. 84% [================- ] 2.0 MB/s | 9.9 MB 00:00 ETA (26/26): binutils-2. 92% [================== ] 2.0 MB/s | 11 MB 00:00 ETA (26/26): binutils-2. 99% [===================-] 2.1 MB/s | 12 MB 00:00 ETA (26/26): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 1/26 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv64 2/26 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 3/26 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 4/26 Installing : python-srpm-macros-3-26. [ ] 5/26 Installing : python-srpm-macros-3-26. [======================= ] 5/26 Installing : python-srpm-macros-3-26.fc28.noarch 5/26 Installing : perl-srpm-macros-1-26.fc [ ] 6/26 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26 Installing : perl-srpm-macros-1-26.fc28.noarch 6/26 Installing : go-srpm-macros-2-11.fc28 [ ] 7/26 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26 Installing : go-srpm-macros-2-11.fc28.noarch 7/26 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26 Installing : binutils-2.30-1.fc28.ris [ ] 11/26 Installing : binutils-2.30-1.fc28.ris [= ] 11/26 Installing : binutils-2.30-1.fc28.ris [== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======== ] 11/26 Installing : binutils-2.30-1.fc28.ris [========= ] 11/26 Installing : binutils-2.30-1.fc28.ris [========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [============ ] 11/26 Installing : binutils-2.30-1.fc28.ris [============= ] 11/26 Installing : binutils-2.30-1.fc28.ris [============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [================ ] 11/26 Installing : binutils-2.30-1.fc28.ris [================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26 Installing : binutils-2.30-1.fc28.riscv64 11/26 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26 Installing : elfutils-0.170-4.fc28.ri [ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26 Installing : elfutils-0.170-4.fc28.riscv64 12/26 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.riscv64 13/26 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 14/26 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv64 15/26 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv64 16/26 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26 Installing : rust-srpm-macros-5-1.fc28.noarch 17/26 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26 Installing : openblas-srpm-macros-2-2 [ ] 19/26 Installing : openblas-srpm-macros-2-2 [================ ] 19/26 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26 Installing : nim-srpm-macros-1-1.fc28.noarch 21/26 Installing : redhat-rpm-config-96-1.f [ ] 22/26 Installing : redhat-rpm-config-96-1.f [== ] 22/26 Installing : redhat-rpm-config-96-1.f [=== ] 22/26 Installing : redhat-rpm-config-96-1.f [========= ] 22/26 Installing : redhat-rpm-config-96-1.f [=========== ] 22/26 Installing : redhat-rpm-config-96-1.f [================= ] 22/26 Installing : redhat-rpm-config-96-1.f [================== ] 22/26 Installing : redhat-rpm-config-96-1.f [=================== ] 22/26 Installing : redhat-rpm-config-96-1.f [===================== ] 22/26 Installing : redhat-rpm-config-96-1.f [====================== ] 22/26 Installing : redhat-rpm-config-96-1.f [======================== ] 22/26 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26 Installing : diffutils-3.6-3.fc28.ris [ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26 Installing : diffutils-3.6-3.fc28.riscv64 23/26 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26 Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26 Installing : which-2.21-4.fc28.riscv6 [ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26 Installing : which-2.21-4.fc28.riscv64 25/26 Running scriptlet: which-2.21-4.fc28.riscv64 25/26 Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26 Installing : make-1:4.2.1-6.fc27.riscv64 26/26 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26 Verifying : diffutils-3.6-3.fc28.riscv64 1/26 Verifying : make-1:4.2.1-6.fc27.riscv64 2/26 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26 Verifying : zstd-1.3.3-1.fc27.riscv64 10/26 Verifying : which-2.21-4.fc28.riscv64 11/26 Verifying : patch-2.7.5-6.fc27.riscv64 12/26 Verifying : unzip-6.0-36.fc28.riscv64 13/26 Verifying : xz-5.2.3-5.fc28.riscv64 14/26 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26 Verifying : elfutils-0.170-4.fc28.riscv64 16/26 Verifying : file-5.32-3.fc28.riscv64 17/26 Verifying : binutils-2.30-1.fc28.riscv64 18/26 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26 Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26 Verifying : go-srpm-macros-2-11.fc28.noarch 22/26 Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26 Verifying : python-srpm-macros-3-26.fc28.noarch 24/26 Verifying : dwz-0.12-5.fc28.riscv64 25/26 Verifying : zip-3.0-20.fc28.riscv64 26/26 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:08:06 ago on Thu Feb 22 16:07:36 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 567 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 660 kB/s | 46 kB 00:03 ETA (2-4/4): glibc-heade 36% [======= ] 796 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 819 kB/s | 442 kB 00:00 (3-4/4): kernel-head 52% [========== ] 848 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 89% [=================- ] 989 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 972 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 986 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 996 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 2.0 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off