OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 15:46:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/libXext-1.3.3-8.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/libXext.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.9 MB/s | 895 kB 00:04 ETA Local RPMS 12% [== ] 2.9 MB/s | 1.7 MB 00:04 ETA Local RPMS 19% [===- ] 2.9 MB/s | 2.7 MB 00:03 ETA Local RPMS 26% [===== ] 2.9 MB/s | 3.7 MB 00:03 ETA Local RPMS 33% [======- ] 3.0 MB/s | 4.7 MB 00:03 ETA Local RPMS 41% [======== ] 3.0 MB/s | 5.7 MB 00:02 ETA Local RPMS 48% [=========- ] 3.0 MB/s | 6.7 MB 00:02 ETA Local RPMS 55% [=========== ] 2.8 MB/s | 7.7 MB 00:02 ETA Local RPMS 62% [============ ] 2.8 MB/s | 8.6 MB 00:01 ETA Local RPMS 68% [=============- ] 2.8 MB/s | 9.6 MB 00:01 ETA Local RPMS 75% [=============== ] 2.8 MB/s | 11 MB 00:01 ETA Local RPMS 82% [================ ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 89% [=================- ] 2.9 MB/s | 12 MB 00:00 ETA Local RPMS 96% [=================== ] 2.9 MB/s | 13 MB 00:00 ETA Local RPMS 2.4 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:42 ago on Thu Feb 22 15:46:35 2018. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k libX11-devel riscv64 1.6.5-5.fc28 local 985 k libXau-devel riscv64 1.0.8-11.fc28 local 19 k libtool riscv64 2.4.6-21.fc27 local 707 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k xmlto riscv64 0.0.28-5.fc27 local 56 k xorg-x11-proto-devel noarch 7.7-20.fc25 local 287 k xorg-x11-util-macros noarch 1.19.0-5.fc24 local 54 k Installing dependencies: docbook-dtds noarch 1.0-68.fc28 local 376 k docbook-style-xsl noarch 1.79.2-6.fc28 local 1.6 M emacs-filesystem noarch 1:25.3-5.fc28 local 67 k flex riscv64 2.6.1-5.fc27 local 301 k libX11 riscv64 1.6.5-5.fc28 local 1.8 M libX11-common noarch 1.6.5-5.fc28 local 166 k libX11-xcb riscv64 1.6.5-5.fc28 local 34 k libXau riscv64 1.0.8-11.fc28 local 42 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k libxcb riscv64 1.12-5.0.riscv64.fc28 local 708 k libxcb-devel riscv64 1.12-5.0.riscv64.fc28 local 1.0 M libxslt riscv64 1.1.28-13.fc28 local 506 k m4 riscv64 1.4.18-5.fc28 local 369 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k sgml-common noarch 0.6.3-47.fc28 local 59 k tar riscv64 2:1.29-7.fc27 local 805 k xml-common noarch 0.6.3-47.fc28 local 30 k Transaction Summary ================================================================================ Install 61 Packages Total download size: 26 M Installed size: 103 M Downloading Packages: (1/61): libX11-devel 0% [ ] --- B/s | 0 B --:-- ETA (1/61): xmlto-0.0.28-5.fc27.riscv64.rpm 611 kB/s | 56 kB 00:00 (2-3/61): xorg-x11-u 0% [ ] 1.4 MB/s | 174 kB 00:18 ETA (2/61): xorg-x11-util-macros-1.19.0-5.fc24.noar 567 kB/s | 54 kB 00:00 (3/61): libX11-devel 0% [ ] 1.4 MB/s | 174 kB 00:18 ETA (3/61): libX11-xcb-1.6.5-5.fc28.riscv64.rpm 606 kB/s | 34 kB 00:00 (4-5/61): libX11-1.6 1% [ ] 1.4 MB/s | 304 kB 00:18 ETA (4-6/61): libX11-dev 4% [- ] 1.5 MB/s | 1.2 MB 00:16 ETA (4-6/61): libX11-dev 8% [=- ] 1.6 MB/s | 2.1 MB 00:14 ETA (4/61): libX11-devel-1.6.5-5.fc28.riscv64.rpm 816 kB/s | 985 kB 00:01 (5-6/61): libX11-1.6 11% [== ] 1.6 MB/s | 2.9 MB 00:14 ETA (5/61): libX11-common-1.6.5-5.fc28.noarch.rpm 929 kB/s | 166 kB 00:00 (6-7/61): libX11-1.6 12% [==- ] 1.7 MB/s | 3.4 MB 00:13 ETA (6/61): libxcb-devel-1.12-5.0.riscv64.fc28.risc 807 kB/s | 1.0 MB 00:01 (7-8/61): libX11-1.6 13% [==- ] 1.6 MB/s | 3.5 MB 00:13 ETA (7-9/61): libxcb-1.1 16% [=== ] 1.7 MB/s | 4.3 MB 00:12 ETA (7-9/61): autoconf-2 20% [==== ] 1.8 MB/s | 5.3 MB 00:11 ETA (7/61): libX11-1.6.5-5.fc28.riscv64.rpm 791 kB/s | 1.8 MB 00:02 (8-9/61): autoconf-2 20% [==== ] 1.7 MB/s | 5.4 MB 00:11 ETA (8/61): libxcb-1.12-5.0.riscv64.fc28.riscv64.rp 628 kB/s | 708 kB 00:01 (9-10/61): emacs-fil 20% [==== ] 1.7 MB/s | 5.4 MB 00:12 ETA (9/61): autoconf-2.69-26.fc28.noarch.rpm 650 kB/s | 709 kB 00:01 (10-11/61): automake 21% [==== ] 1.7 MB/s | 5.5 MB 00:12 ETA (10/61): emacs-filesystem-25.3-5.fc28.noarch.rp 214 kB/s | 67 kB 00:00 (11-12/61): libXau-d 21% [==== ] 1.7 MB/s | 5.6 MB 00:12 ETA (11/61): libXau-devel-1.0.8-11.fc28.riscv64.rpm 302 kB/s | 19 kB 00:00 (12/61): automake-1. 21% [==== ] 1.7 MB/s | 5.6 MB 00:12 ETA (12/61): libXau-1.0.8-11.fc28.riscv64.rpm 498 kB/s | 42 kB 00:00 (13-14/61): automake 22% [==== ] 1.6 MB/s | 5.7 MB 00:12 ETA (13-15/61): automake 25% [===== ] 1.7 MB/s | 6.6 MB 00:11 ETA (13/61): automake-1.15.1-3.fc28.noarch.rpm 724 kB/s | 706 kB 00:00 (14-15/61): libtool- 28% [=====- ] 1.8 MB/s | 7.5 MB 00:10 ETA (14/61): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 545 kB/s | 14 kB 00:00 (15-16/61): libtool- 29% [=====- ] 1.8 MB/s | 7.5 MB 00:10 ETA (15/61): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 591 kB/s | 15 kB 00:00 (16-17/61): libtool- 29% [=====- ] 1.8 MB/s | 7.6 MB 00:10 ETA (16/61): libtool-2.4.6-21.fc27.riscv64.rpm 737 kB/s | 707 kB 00:00 (17-18/61): tar-1.29 29% [=====- ] 1.7 MB/s | 7.7 MB 00:10 ETA (17/61): pkgconf-1.4.1-1.fc27.riscv64.rpm 215 kB/s | 35 kB 00:00 (18-19/61): tar-1.29 29% [=====- ] 1.7 MB/s | 7.7 MB 00:10 ETA (18/61): libpkgconf-1.4.1-1.fc27.riscv64.rpm 577 kB/s | 74 kB 00:00 (19-20/61): xorg-x11 30% [====== ] 1.7 MB/s | 7.9 MB 00:10 ETA (19/61): tar-1.29-7.fc27.riscv64.rpm 664 kB/s | 805 kB 00:01 (20-21/61): docbook- 31% [====== ] 1.7 MB/s | 8.1 MB 00:10 ETA (20/61): sgml-common-0.6.3-47.fc28.noarch.rpm 806 kB/s | 59 kB 00:00 (21-22/61): docbook- 31% [====== ] 1.7 MB/s | 8.2 MB 00:10 ETA (21/61): xml-common-0.6.3-47.fc28.noarch.rpm 733 kB/s | 30 kB 00:00 (22-23/61): docbook- 32% [====== ] 1.7 MB/s | 8.3 MB 00:10 ETA (22/61): xorg-x11-proto-devel-7.7-20.fc25.noarc 511 kB/s | 287 kB 00:00 (23-24/61): docbook- 32% [======- ] 1.7 MB/s | 8.5 MB 00:10 ETA (23/61): docbook-dtds-1.0-68.fc28.noarch.rpm 551 kB/s | 376 kB 00:00 (24-25/61): flex-2.6 34% [======- ] 1.7 MB/s | 9.0 MB 00:10 ETA (24/61): flex-2.6.1-5.fc27.riscv64.rpm 745 kB/s | 301 kB 00:00 (25-26/61): libxslt- 36% [======= ] 1.7 MB/s | 9.4 MB 00:09 ETA (25-27/61): m4-1.4.1 39% [=======- ] 1.8 MB/s | 10 MB 00:08 ETA (25/61): libxslt-1.1.28-13.fc28.riscv64.rpm 830 kB/s | 506 kB 00:00 (26-27/61): docbook- 40% [======== ] 1.8 MB/s | 10 MB 00:08 ETA (26/61): m4-1.4.18-5.fc28.riscv64.rpm 739 kB/s | 369 kB 00:00 (27-28/61): docbook- 40% [======== ] 1.8 MB/s | 11 MB 00:08 ETA (27/61): perl-Carp-1.42-408.fc27.0.riscv64.noar 457 kB/s | 84 kB 00:00 (28-29/61): docbook- 41% [======== ] 1.8 MB/s | 11 MB 00:08 ETA (28/61): perl-Exporter-5.72-408.fc27.0.riscv64. 580 kB/s | 87 kB 00:00 (29-30/61): docbook- 41% [======== ] 1.7 MB/s | 11 MB 00:08 ETA (29/61): perl-File-Path-2.15-1.fc27.noarch.rpm 357 kB/s | 37 kB 00:00 (30-31/61): docbook- 41% [======== ] 1.7 MB/s | 11 MB 00:08 ETA (30/61): perl-Getopt-Long-2.50-3.fc27.noarch.rp 525 kB/s | 61 kB 00:00 (31-32/61): docbook- 42% [======== ] 1.7 MB/s | 11 MB 00:08 ETA (31/61): perl-Thread-Queue-3.12-408.fc27.0.risc 577 kB/s | 77 kB 00:00 (32-33/61): docbook- 42% [========- ] 1.7 MB/s | 11 MB 00:08 ETA (32/61): perl-constant-1.33-408.fc27.0.riscv64. 586 kB/s | 79 kB 00:00 (33-34/61): docbook- 42% [========- ] 1.7 MB/s | 11 MB 00:08 ETA (33/61): perl-Errno-1.28-408.fc28.1.riscv64.ris 524 kB/s | 73 kB 00:00 (34-35/61): perl-lib 43% [========- ] 1.7 MB/s | 11 MB 00:08 ETA (34-36/61): docbook- 46% [========= ] 1.8 MB/s | 12 MB 00:07 ETA (34/61): docbook-style-xsl-1.79.2-6.fc28.noarch 675 kB/s | 1.6 MB 00:02 (35-36/61): perl-int 49% [=========- ] 1.8 MB/s | 13 MB 00:07 ETA (35/61): perl-IO-1.38-408.fc28.1.riscv64.riscv6 843 kB/s | 176 kB 00:00 (36-37/61): perl-lib 52% [========== ] 1.8 MB/s | 14 MB 00:06 ETA (36/61): perl-PathTools-3.67-408.fc27.0.riscv64 876 kB/s | 166 kB 00:00 (37-38/61): perl-lib 53% [==========- ] 1.8 MB/s | 14 MB 00:06 ETA (37/61): perl-threads-2.21-1.fc27.riscv64.rpm 848 kB/s | 104 kB 00:00 (38-39/61): perl-lib 55% [=========== ] 1.8 MB/s | 14 MB 00:06 ETA (38/61): perl-Text-ParseWords-3.30-408.fc27.0.r 762 kB/s | 73 kB 00:00 (39-40/61): perl-lib 56% [=========== ] 1.8 MB/s | 15 MB 00:06 ETA (39/61): perl-Data-Dumper-2.167-408.fc27.0.risc 858 kB/s | 149 kB 00:00 (40-41/61): perl-lib 57% [===========- ] 1.9 MB/s | 15 MB 00:05 ETA (40/61): perl-Text-Tabs+Wrap-2013.0523-408.fc27 847 kB/s | 80 kB 00:00 (41-42/61): perl-lib 58% [===========- ] 1.9 MB/s | 15 MB 00:05 ETA (41/61): perl-parent-0.236-408.fc27.0.riscv64.n 763 kB/s | 71 kB 00:00 (42-43/61): perl-lib 59% [===========- ] 1.9 MB/s | 16 MB 00:05 ETA (42/61): perl-Scalar-List-Utils-1.48-1.fc27.ris 835 kB/s | 119 kB 00:00 (43-44/61): perl-int 61% [============ ] 1.9 MB/s | 16 MB 00:05 ETA (43/61): perl-Unicode-Normalize-1.25-408.fc27.0 867 kB/s | 164 kB 00:00 (44-45/61): perl-int 62% [============- ] 1.9 MB/s | 16 MB 00:05 ETA (44/61): perl-macros-5.26.1-408.fc28.1.riscv64. 770 kB/s | 69 kB 00:00 (45-46/61): perl-int 63% [============- ] 1.9 MB/s | 17 MB 00:04 ETA (45/61): perl-threads-shared-1.58-1.fc27.riscv6 844 kB/s | 91 kB 00:00 (46-47/61): perl-int 64% [============- ] 1.9 MB/s | 17 MB 00:04 ETA (46/61): perl-Socket-2.027-1.fc27.riscv64.rpm 852 kB/s | 95 kB 00:00 (47-48/61): perl-int 65% [============= ] 1.9 MB/s | 17 MB 00:04 ETA (47/61): perl-Pod-Usage-1.69-408.fc27.0.riscv64 837 kB/s | 89 kB 00:00 (48-49/61): perl-int 67% [============= ] 1.9 MB/s | 17 MB 00:04 ETA (48/61): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 904 kB/s | 139 kB 00:00 (49-50/61): perl-lib 68% [=============- ] 1.9 MB/s | 18 MB 00:04 ETA (49/61): perl-podlators-4.09-408.fc27.0.riscv64 903 kB/s | 157 kB 00:00 (50-51/61): perl-lib 70% [============== ] 1.9 MB/s | 18 MB 00:03 ETA (50/61): perl-File-Temp-0.230.400-408.fc27.0.ri 854 kB/s | 103 kB 00:00 (51-52/61): perl-lib 71% [============== ] 2.0 MB/s | 19 MB 00:03 ETA (51/61): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 801 kB/s | 97 kB 00:00 (52-53/61): perl-lib 72% [==============- ] 2.0 MB/s | 19 MB 00:03 ETA (52/61): perl-Pod-Simple-3.35-408.fc27.0.riscv6 922 kB/s | 271 kB 00:00 (53-54/61): perl-lib 75% [=============== ] 2.0 MB/s | 20 MB 00:03 ETA (53-55/61): perl-int 79% [===============- ] 2.0 MB/s | 21 MB 00:02 ETA (53/61): perl-libs-5.26.1-408.fc28.1.riscv64.ri 722 kB/s | 3.3 MB 00:04 (54-55/61): perl-Enc 80% [================ ] 1.9 MB/s | 21 MB 00:02 ETA (54/61): perl-Time-Local-1.250-394.fc27.noarch. 727 kB/s | 30 kB 00:00 (55-56/61): perl-Enc 80% [================ ] 1.9 MB/s | 21 MB 00:02 ETA (55/61): perl-MIME-Base64-3.15-408.fc27.0.riscv 919 kB/s | 111 kB 00:00 (56-57/61): perl-Enc 82% [================ ] 1.9 MB/s | 21 MB 00:02 ETA (56/61): perl-Storable-2.62-408.fc27.0.riscv64. 927 kB/s | 205 kB 00:00 (57-58/61): perl-int 84% [================- ] 1.9 MB/s | 22 MB 00:02 ETA (57/61): perl-Term-ANSIColor-4.06-408.fc27.0.ri 875 kB/s | 94 kB 00:00 (58-59/61): perl-int 85% [================= ] 1.9 MB/s | 22 MB 00:01 ETA (58/61): perl-Term-Cap-1.17-408.fc27.0.riscv64. 856 kB/s | 78 kB 00:00 (59-60/61): perl-int 86% [================= ] 1.9 MB/s | 22 MB 00:01 ETA (59/61): perl-Pod-Escapes-1.07-408.fc27.0.riscv 844 kB/s | 77 kB 00:00 (60-61/61): perl-int 87% [================= ] 1.9 MB/s | 23 MB 00:01 ETA (60/61): perl-Encode-2.94-16.fc27.riscv64.rpm 715 kB/s | 1.4 MB 00:02 (61/61): perl-interp 90% [================== ] 1.9 MB/s | 24 MB 00:01 ETA (61/61): perl-interp 94% [==================- ] 2.0 MB/s | 25 MB 00:00 ETA (61/61): perl-interp 97% [===================-] 2.1 MB/s | 25 MB 00:00 ETA (61/61): perl-interpreter-5.26.1-408.fc28.1.ris 925 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 26 MB 00:14 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/61 Installing : perl-Exporter-5.72-408.f [===== ] 1/61 Installing : perl-Exporter-5.72-408.f [======= ] 1/61 Installing : perl-Exporter-5.72-408.f [==================== ] 1/61 Installing : perl-Exporter-5.72-408.f [======================== ] 1/61 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/61 Installing : perl-libs-4:5.26.1-408.f [ ] 2/61 Installing : perl-libs-4:5.26.1-408.f [= ] 2/61 Installing : perl-libs-4:5.26.1-408.f [== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/61 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/61 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/61 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/61 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/61 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/61 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/61 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/61random: crng init done Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/61 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/61 Installing : perl-Carp-1.42-408.fc27. [ ] 3/61 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/61 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/61 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/61 Installing : perl-Scalar-List-Utils-3 [ ] 4/61 Installing : perl-Scalar-List-Utils-3 [= ] 4/61 Installing : perl-Scalar-List-Utils-3 [== ] 4/61 Installing : perl-Scalar-List-Utils-3 [=== ] 4/61 Installing : perl-Scalar-List-Utils-3 [===== ] 4/61 Installing : perl-Scalar-List-Utils-3 [======== ] 4/61 Installing : perl-Scalar-List-Utils-3 [========== ] 4/61 Installing : perl-Scalar-List-Utils-3 [============= ] 4/61 Installing : perl-Scalar-List-Utils-3 [================ ] 4/61 Installing : perl-Scalar-List-Utils-3 [================== ] 4/61 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/61 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/61 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/61 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/61 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/61 Installing : perl-Text-ParseWords-3.3 [ ] 5/61 Installing : perl-Text-ParseWords-3.3 [======= ] 5/61 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/61 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/61 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 6/61 Installing : m4-1.4.18-5.fc28.riscv64 6/61 Running scriptlet: m4-1.4.18-5.fc28.riscv64 6/61 Running scriptlet: xml-common-0.6.3-47.fc28.noarch 7/61 Installing : xml-common-0.6.3-47.fc28 [ ] 7/61 Installing : xml-common-0.6.3-47.fc28 [= ] 7/61 Installing : xml-common-0.6.3-47.fc28 [================= ] 7/61 Installing : xml-common-0.6.3-47.fc28 [=================== ] 7/61 Installing : xml-common-0.6.3-47.fc28 [==================== ] 7/61 Installing : xml-common-0.6.3-47.fc28 [======================== ] 7/61 Installing : xml-common-0.6.3-47.fc28.noarch 7/61 Installing : libXau-1.0.8-11.fc28.ris [ ] 8/61 Installing : libXau-1.0.8-11.fc28.ris [========= ] 8/61 Installing : libXau-1.0.8-11.fc28.ris [============= ] 8/61 Installing : libXau-1.0.8-11.fc28.ris [====================== ] 8/61 Installing : libXau-1.0.8-11.fc28.ris [======================== ] 8/61 Installing : libXau-1.0.8-11.fc28.riscv64 8/61 Running scriptlet: libXau-1.0.8-11.fc28.riscv64 8/61 Installing : libxcb-1.12-5.0.riscv64. [ ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [=== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [==== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [===== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [====== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [======= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [======== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [========= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [========== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [=========== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [============ ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [============= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [============== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [=============== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [================ ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [================= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [=================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [==================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [===================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [====================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [======================= ] 9/61 Installing : libxcb-1.12-5.0.riscv64. [======================== ] 9/61 Installing : libxcb-1.12-5.0.riscv64.fc28.riscv64 9/61 Running scriptlet: libxcb-1.12-5.0.riscv64.fc28.riscv64 9/61 Installing : flex-2.6.1-5.fc27.riscv6 [ ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [=== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [==== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [===== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [====== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [======= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [======== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [========= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [========== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [=========== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [============ ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [============= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [============== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [=============== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [================ ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [================= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [=================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [==================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [===================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [====================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [======================= ] 10/61 Installing : flex-2.6.1-5.fc27.riscv6 [======================== ] 10/61 Installing : flex-2.6.1-5.fc27.riscv64 10/61 Running scriptlet: flex-2.6.1-5.fc27.riscv64 10/61 Installing : perl-Term-ANSIColor-4.06 [ ] 11/61 Installing : perl-Term-ANSIColor-4.06 [==== ] 11/61 Installing : perl-Term-ANSIColor-4.06 [================== ] 11/61 Installing : perl-Term-ANSIColor-4.06 [======================== ] 11/61 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 11/61 Installing : perl-macros-4:5.26.1-408 [ ] 12/61 Installing : perl-macros-4:5.26.1-408 [======================== ] 12/61 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 12/61 Installing : perl-constant-1.33-408.f [ ] 13/61 Installing : perl-constant-1.33-408.f [======= ] 13/61 Installing : perl-constant-1.33-408.f [======================== ] 13/61 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 13/61 Installing : perl-Errno-1.28-408.fc28 [ ] 14/61 Installing : perl-Errno-1.28-408.fc28 [================= ] 14/61 Installing : perl-Errno-1.28-408.fc28 [======================== ] 14/61 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 14/61 Installing : perl-File-Path-2.15-1.fc [ ] 15/61 Installing : perl-File-Path-2.15-1.fc [==== ] 15/61 Installing : perl-File-Path-2.15-1.fc [======== ] 15/61 Installing : perl-File-Path-2.15-1.fc [==================== ] 15/61 Installing : perl-File-Path-2.15-1.fc [======================== ] 15/61 Installing : perl-File-Path-2.15-1.fc27.noarch 15/61 Installing : perl-PathTools-3.67-408. [ ] 16/61 Installing : perl-PathTools-3.67-408. [== ] 16/61 Installing : perl-PathTools-3.67-408. [=== ] 16/61 Installing : perl-PathTools-3.67-408. [==== ] 16/61 Installing : perl-PathTools-3.67-408. [======= ] 16/61 Installing : perl-PathTools-3.67-408. [========= ] 16/61 Installing : perl-PathTools-3.67-408. [=========== ] 16/61 Installing : perl-PathTools-3.67-408. [============== ] 16/61 Installing : perl-PathTools-3.67-408. [================== ] 16/61 Installing : perl-PathTools-3.67-408. [==================== ] 16/61 Installing : perl-PathTools-3.67-408. [===================== ] 16/61 Installing : perl-PathTools-3.67-408. [====================== ] 16/61 Installing : perl-PathTools-3.67-408. [======================= ] 16/61 Installing : perl-PathTools-3.67-408. [======================== ] 16/61 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 16/61 Installing : perl-threads-shared-1.58 [ ] 17/61 Installing : perl-threads-shared-1.58 [=== ] 17/61 Installing : perl-threads-shared-1.58 [======= ] 17/61 Installing : perl-threads-shared-1.58 [========== ] 17/61 Installing : perl-threads-shared-1.58 [============== ] 17/61 Installing : perl-threads-shared-1.58 [================= ] 17/61 Installing : perl-threads-shared-1.58 [==================== ] 17/61 Installing : perl-threads-shared-1.58 [======================= ] 17/61 Installing : perl-threads-shared-1.58 [======================== ] 17/61 Installing : perl-threads-shared-1.58-1.fc27.riscv64 17/61 Installing : perl-threads-1:2.21-1.fc [ ] 18/61 Installing : perl-threads-1:2.21-1.fc [=== ] 18/61 Installing : perl-threads-1:2.21-1.fc [====== ] 18/61 Installing : perl-threads-1:2.21-1.fc [========= ] 18/61 Installing : perl-threads-1:2.21-1.fc [============= ] 18/61 Installing : perl-threads-1:2.21-1.fc [================ ] 18/61 Installing : perl-threads-1:2.21-1.fc [================== ] 18/61 Installing : perl-threads-1:2.21-1.fc [===================== ] 18/61 Installing : perl-threads-1:2.21-1.fc [====================== ] 18/61 Installing : perl-threads-1:2.21-1.fc [======================= ] 18/61 Installing : perl-threads-1:2.21-1.fc [======================== ] 18/61 Installing : perl-threads-1:2.21-1.fc27.riscv64 18/61 Installing : perl-Text-Tabs+Wrap-2013 [ ] 19/61 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 19/61 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 19/61 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 19/61 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 19/61 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 19/61 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 19/61 Installing : perl-parent-1:0.236-408. [ ] 20/61 Installing : perl-parent-1:0.236-408. [============ ] 20/61 Installing : perl-parent-1:0.236-408. [======================== ] 20/61 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 20/61 Installing : perl-Unicode-Normalize-1 [ ] 21/61 Installing : perl-Unicode-Normalize-1 [= ] 21/61 Installing : perl-Unicode-Normalize-1 [== ] 21/61 Installing : perl-Unicode-Normalize-1 [=== ] 21/61 Installing : perl-Unicode-Normalize-1 [==== ] 21/61 Installing : perl-Unicode-Normalize-1 [===== ] 21/61 Installing : perl-Unicode-Normalize-1 [====== ] 21/61 Installing : perl-Unicode-Normalize-1 [======= ] 21/61 Installing : perl-Unicode-Normalize-1 [======== ] 21/61 Installing : perl-Unicode-Normalize-1 [========= ] 21/61 Installing : perl-Unicode-Normalize-1 [========== ] 21/61 Installing : perl-Unicode-Normalize-1 [============ ] 21/61 Installing : perl-Unicode-Normalize-1 [============= ] 21/61 Installing : perl-Unicode-Normalize-1 [============== ] 21/61 Installing : perl-Unicode-Normalize-1 [=============== ] 21/61 Installing : perl-Unicode-Normalize-1 [================ ] 21/61 Installing : perl-Unicode-Normalize-1 [================= ] 21/61 Installing : perl-Unicode-Normalize-1 [================== ] 21/61 Installing : perl-Unicode-Normalize-1 [=================== ] 21/61 Installing : perl-Unicode-Normalize-1 [==================== ] 21/61 Installing : perl-Unicode-Normalize-1 [===================== ] 21/61 Installing : perl-Unicode-Normalize-1 [====================== ] 21/61 Installing : perl-Unicode-Normalize-1 [======================= ] 21/61 Installing : perl-Unicode-Normalize-1 [======================== ] 21/61 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 21/61 Installing : perl-interpreter-4:5.26. [ ] 22/61 Installing : perl-interpreter-4:5.26. [= ] 22/61 Installing : perl-interpreter-4:5.26. [== ] 22/61 Installing : perl-interpreter-4:5.26. [=== ] 22/61 Installing : perl-interpreter-4:5.26. [==== ] 22/61 Installing : perl-interpreter-4:5.26. [===== ] 22/61 Installing : perl-interpreter-4:5.26. [====== ] 22/61 Installing : perl-interpreter-4:5.26. [======= ] 22/61 Installing : perl-interpreter-4:5.26. [======== ] 22/61 Installing : perl-interpreter-4:5.26. [========= ] 22/61 Installing : perl-interpreter-4:5.26. [========== ] 22/61 Installing : perl-interpreter-4:5.26. [=========== ] 22/61 Installing : perl-interpreter-4:5.26. [============ ] 22/61 Installing : perl-interpreter-4:5.26. [============= ] 22/61 Installing : perl-interpreter-4:5.26. [============== ] 22/61 Installing : perl-interpreter-4:5.26. [=============== ] 22/61 Installing : perl-interpreter-4:5.26. [================ ] 22/61 Installing : perl-interpreter-4:5.26. [================= ] 22/61 Installing : perl-interpreter-4:5.26. [================== ] 22/61 Installing : perl-interpreter-4:5.26. [=================== ] 22/61 Installing : perl-interpreter-4:5.26. [==================== ] 22/61 Installing : perl-interpreter-4:5.26. [===================== ] 22/61 Installing : perl-interpreter-4:5.26. [====================== ] 22/61 Installing : perl-interpreter-4:5.26. [======================= ] 22/61 Installing : perl-interpreter-4:5.26. [======================== ] 22/61 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 22/61 Installing : perl-Socket-4:2.027-1.fc [ ] 23/61 Installing : perl-Socket-4:2.027-1.fc [=== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [======= ] 23/61 Installing : perl-Socket-4:2.027-1.fc [========== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [============== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [================= ] 23/61 Installing : perl-Socket-4:2.027-1.fc [==================== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [===================== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [====================== ] 23/61 Installing : perl-Socket-4:2.027-1.fc [======================= ] 23/61 Installing : perl-Socket-4:2.027-1.fc [======================== ] 23/61 Installing : perl-Socket-4:2.027-1.fc27.riscv64 23/61 Installing : perl-IO-1.38-408.fc28.1. [ ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [= ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [=== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [==== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [===== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [====== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [======= ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [======== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [============== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [================= ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 24/61 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 24/61 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 24/61 Installing : perl-File-Temp-0.230.400 [ ] 25/61 Installing : perl-File-Temp-0.230.400 [=== ] 25/61 Installing : perl-File-Temp-0.230.400 [============ ] 25/61 Installing : perl-File-Temp-0.230.400 [===================== ] 25/61 Installing : perl-File-Temp-0.230.400 [======================== ] 25/61 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 25/61 Installing : perl-Storable-1:2.62-408 [ ] 26/61 Installing : perl-Storable-1:2.62-408 [== ] 26/61 Installing : perl-Storable-1:2.62-408 [==== ] 26/61 Installing : perl-Storable-1:2.62-408 [====== ] 26/61 Installing : perl-Storable-1:2.62-408 [======== ] 26/61 Installing : perl-Storable-1:2.62-408 [========== ] 26/61 Installing : perl-Storable-1:2.62-408 [============ ] 26/61 Installing : perl-Storable-1:2.62-408 [============== ] 26/61 Installing : perl-Storable-1:2.62-408 [================ ] 26/61 Installing : perl-Storable-1:2.62-408 [================== ] 26/61 Installing : perl-Storable-1:2.62-408 [==================== ] 26/61 Installing : perl-Storable-1:2.62-408 [====================== ] 26/61 Installing : perl-Storable-1:2.62-408 [======================== ] 26/61 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 26/61 Installing : perl-MIME-Base64-3.15-40 [ ] 27/61 Installing : perl-MIME-Base64-3.15-40 [= ] 27/61 Installing : perl-MIME-Base64-3.15-40 [== ] 27/61 Installing : perl-MIME-Base64-3.15-40 [========== ] 27/61 Installing : perl-MIME-Base64-3.15-40 [================== ] 27/61 Installing : perl-MIME-Base64-3.15-40 [======================= ] 27/61 Installing : perl-MIME-Base64-3.15-40 [======================== ] 27/61 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 27/61 Installing : perl-Term-Cap-1.17-408.f [ ] 28/61 Installing : perl-Term-Cap-1.17-408.f [==== ] 28/61 Installing : perl-Term-Cap-1.17-408.f [======================== ] 28/61 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 28/61 Installing : perl-Pod-Escapes-1:1.07- [ ] 29/61 Installing : perl-Pod-Escapes-1:1.07- [==== ] 29/61 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 29/61 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 29/61 Installing : perl-Time-Local-1:1.250- [ ] 30/61 Installing : perl-Time-Local-1:1.250- [= ] 30/61 Installing : perl-Time-Local-1:1.250- [===== ] 30/61 Installing : perl-Time-Local-1:1.250- [======== ] 30/61 Installing : perl-Time-Local-1:1.250- [========= ] 30/61 Installing : perl-Time-Local-1:1.250- [================= ] 30/61 Installing : perl-Time-Local-1:1.250- [=================== ] 30/61 Installing : perl-Time-Local-1:1.250- [======================== ] 30/61 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 30/61 Installing : perl-HTTP-Tiny-0.070-408 [ ] 31/61 Installing : perl-HTTP-Tiny-0.070-408 [== ] 31/61 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 31/61 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 31/61 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 31/61 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 31/61 Installing : perl-Pod-Simple-1:3.35-4 [ ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 32/61 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 32/61 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 32/61 Installing : perl-Encode-4:2.94-16.fc [ ] 33/61 Installing : perl-Encode-4:2.94-16.fc [= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [=== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [==== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [===== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [====== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [======= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [======== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [========= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [========== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [=========== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [============ ] 33/61 Installing : perl-Encode-4:2.94-16.fc [============= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [============== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [=============== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [================ ] 33/61 Installing : perl-Encode-4:2.94-16.fc [================= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [=================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [==================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [===================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [====================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc [======================= ] 33/61 Installing : perl-Encode-4:2.94-16.fc [======================== ] 33/61 Installing : perl-Encode-4:2.94-16.fc27.riscv64 33/61 Installing : perl-Getopt-Long-1:2.50- [ ] 34/61 Installing : perl-Getopt-Long-1:2.50- [=== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [==== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [===== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [====== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [======= ] 34/61 Installing : perl-Getopt-Long-1:2.50- [========= ] 34/61 Installing : perl-Getopt-Long-1:2.50- [=============== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [===================== ] 34/61 Installing : perl-Getopt-Long-1:2.50- [======================== ] 34/61 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 34/61 Installing : perl-Pod-Usage-4:1.69-40 [ ] 35/61 Installing : perl-Pod-Usage-4:1.69-40 [== ] 35/61 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 35/61 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 35/61 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 35/61 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 35/61 Installing : perl-podlators-4.09-408. [ ] 36/61 Installing : perl-podlators-4.09-408. [= ] 36/61 Installing : perl-podlators-4.09-408. [== ] 36/61 Installing : perl-podlators-4.09-408. [=== ] 36/61 Installing : perl-podlators-4.09-408. [==== ] 36/61 Installing : perl-podlators-4.09-408. [===== ] 36/61 Installing : perl-podlators-4.09-408. [====== ] 36/61 Installing : perl-podlators-4.09-408. [======= ] 36/61 Installing : perl-podlators-4.09-408. [=========== ] 36/61 Installing : perl-podlators-4.09-408. [=============== ] 36/61 Installing : perl-podlators-4.09-408. [================ ] 36/61 Installing : perl-podlators-4.09-408. [================= ] 36/61 Installing : perl-podlators-4.09-408. [===================== ] 36/61 Installing : perl-podlators-4.09-408. [====================== ] 36/61 Installing : perl-podlators-4.09-408. [======================= ] 36/61 Installing : perl-podlators-4.09-408. [======================== ] 36/61 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 36/61 Installing : perl-Pod-Perldoc-3.28-40 [ ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [= ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 37/61 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 37/61 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 37/61 Installing : perl-Thread-Queue-3.12-4 [ ] 38/61 Installing : perl-Thread-Queue-3.12-4 [===== ] 38/61 Installing : perl-Thread-Queue-3.12-4 [====== ] 38/61 Installing : perl-Thread-Queue-3.12-4 [======================== ] 38/61 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 38/61 Installing : perl-Data-Dumper-2.167-4 [ ] 39/61 Installing : perl-Data-Dumper-2.167-4 [=== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [==== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [======== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [============ ] 39/61 Installing : perl-Data-Dumper-2.167-4 [=============== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [=================== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [====================== ] 39/61 Installing : perl-Data-Dumper-2.167-4 [======================= ] 39/61 Installing : perl-Data-Dumper-2.167-4 [======================== ] 39/61 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 39/61 Installing : libxslt-1.1.28-13.fc28.r [ ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [=== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [==== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [===== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [====== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [======= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [======== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [========= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [========== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [=========== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [============ ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [============= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [============== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [=============== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [================ ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [================= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [=================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [==================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [===================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [====================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [======================= ] 40/61 Installing : libxslt-1.1.28-13.fc28.r [======================== ] 40/61 Installing : libxslt-1.1.28-13.fc28.riscv64 40/61 Running scriptlet: libxslt-1.1.28-13.fc28.riscv64 40/61 Installing : sgml-common-0.6.3-47.fc2 [ ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [===== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [====== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [========== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [=========== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [============ ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [============= ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [============== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [=============== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [================ ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [================= ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [================== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [=================== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [==================== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [===================== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [====================== ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [======================= ] 41/61 Installing : sgml-common-0.6.3-47.fc2 [======================== ] 41/61 Installing : sgml-common-0.6.3-47.fc28.noarch 41/61 Installing : docbook-dtds-1.0-68.fc28 [ ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [=== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [==== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [===== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [====== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [======= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [======== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [========= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [========== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [=========== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [============ ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [============= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [============== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [=============== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [================ ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [================= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [=================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [==================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [===================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [====================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [======================= ] 42/61 Installing : docbook-dtds-1.0-68.fc28 [======================== ] 42/61 Installing : docbook-dtds-1.0-68.fc28.noarch 42/61 Running scriptlet: docbook-dtds-1.0-68.fc28.noarch 42/61 Installing : docbook-style-xsl-1.79.2 [ ] 43/61 Installing : docbook-style-xsl-1.79.2 [= ] 43/61 Installing : docbook-style-xsl-1.79.2 [== ] 43/61 Installing : docbook-style-xsl-1.79.2 [=== ] 43/61 Installing : docbook-style-xsl-1.79.2 [==== ] 43/61 Installing : docbook-style-xsl-1.79.2 [===== ] 43/61 Installing : docbook-style-xsl-1.79.2 [====== ] 43/61 Installing : docbook-style-xsl-1.79.2 [======= ] 43/61 Installing : docbook-style-xsl-1.79.2 [======== ] 43/61 Installing : docbook-style-xsl-1.79.2 [========= ] 43/61 Installing : docbook-style-xsl-1.79.2 [========== ] 43/61 Installing : docbook-style-xsl-1.79.2 [=========== ] 43/61 Installing : docbook-style-xsl-1.79.2 [============ ] 43/61 Installing : docbook-style-xsl-1.79.2 [============= ] 43/61 Installing : docbook-style-xsl-1.79.2 [============== ] 43/61 Installing : docbook-style-xsl-1.79.2 [=============== ] 43/61 Installing : docbook-style-xsl-1.79.2 [================ ] 43/61 Installing : docbook-style-xsl-1.79.2 [================= ] 43/61 Installing : docbook-style-xsl-1.79.2 [================== ] 43/61 Installing : docbook-style-xsl-1.79.2 [=================== ] 43/61 Installing : docbook-style-xsl-1.79.2 [==================== ] 43/61 Installing : docbook-style-xsl-1.79.2 [===================== ] 43/61 Installing : docbook-style-xsl-1.79.2 [====================== ] 43/61 Installing : docbook-style-xsl-1.79.2 [======================= ] 43/61 Installing : docbook-style-xsl-1.79.2 [======================== ] 43/61 Installing : docbook-style-xsl-1.79.2-6.fc28.noarch 43/61 Running scriptlet: docbook-style-xsl-1.79.2-6.fc28.noarch 43/61 Installing : libpkgconf-1.4.1-1.fc27. [ ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 44/61 Installing : libpkgconf-1.4.1-1.fc27.riscv64 44/61 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 44/61 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 45/61 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 45/61 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 45/61 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 45/61 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 45/61 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 45/61 Installing : pkgconf-1.4.1-1.fc27.riscv64 45/61 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 46/61 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 46/61 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 46/61 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 46/61 Installing : pkgconf-pkg-config-1.4.1 [ ] 47/61 Installing : pkgconf-pkg-config-1.4.1 [==== ] 47/61 Installing : pkgconf-pkg-config-1.4.1 [===== ] 47/61 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 47/61 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 47/61 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 47/61 Installing : xorg-x11-proto-devel-7.7 [ ] 48/61 Installing : xorg-x11-proto-devel-7.7 [= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [=== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [==== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [===== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [====== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [======= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [======== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [========= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [========== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [=========== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [============ ] 48/61 Installing : xorg-x11-proto-devel-7.7 [============= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [============== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [=============== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [================ ] 48/61 Installing : xorg-x11-proto-devel-7.7 [================= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [================== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [=================== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [==================== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [===================== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [====================== ] 48/61 Installing : xorg-x11-proto-devel-7.7 [======================= ] 48/61 Installing : xorg-x11-proto-devel-7.7 [======================== ] 48/61 Installing : xorg-x11-proto-devel-7.7-20.fc25.noarch 48/61 Installing : libXau-devel-1.0.8-11.fc [ ] 49/61 Installing : libXau-devel-1.0.8-11.fc [=========== ] 49/61 Installing : libXau-devel-1.0.8-11.fc [============ ] 49/61 Installing : libXau-devel-1.0.8-11.fc [============= ] 49/61 Installing : libXau-devel-1.0.8-11.fc [==================== ] 49/61 Installing : libXau-devel-1.0.8-11.fc [===================== ] 49/61 Installing : libXau-devel-1.0.8-11.fc [====================== ] 49/61 Installing : libXau-devel-1.0.8-11.fc [======================= ] 49/61 Installing : libXau-devel-1.0.8-11.fc [======================== ] 49/61 Installing : libXau-devel-1.0.8-11.fc28.riscv64 49/61 Installing : libxcb-devel-1.12-5.0.ri [ ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [=== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [==== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [===== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [====== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [======= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [======== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [========= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [========== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [=========== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [============ ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [============= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [============== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [=============== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [================ ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [================= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [================== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [=================== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [==================== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [===================== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [====================== ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [======================= ] 50/61 Installing : libxcb-devel-1.12-5.0.ri [======================== ] 50/61 Installing : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 50/61 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 51/61 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 51/61 Installing : tar-2:1.29-7.fc27.riscv64 51/61 Running scriptlet: tar-2:1.29-7.fc27.riscv64 51/61 Installing : emacs-filesystem-1:25.3- [ ] 52/61 Installing : emacs-filesystem-1:25.3- [===== ] 52/61 Installing : emacs-filesystem-1:25.3- [============ ] 52/61 Installing : emacs-filesystem-1:25.3- [=================== ] 52/61 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 52/61 Installing : autoconf-2.69-26.fc28.no [ ] 53/61 Installing : autoconf-2.69-26.fc28.no [= ] 53/61 Installing : autoconf-2.69-26.fc28.no [== ] 53/61 Installing : autoconf-2.69-26.fc28.no [=== ] 53/61 Installing : autoconf-2.69-26.fc28.no [==== ] 53/61 Installing : autoconf-2.69-26.fc28.no [===== ] 53/61 Installing : autoconf-2.69-26.fc28.no [====== ] 53/61 Installing : autoconf-2.69-26.fc28.no [======= ] 53/61 Installing : autoconf-2.69-26.fc28.no [======== ] 53/61 Installing : autoconf-2.69-26.fc28.no [========= ] 53/61 Installing : autoconf-2.69-26.fc28.no [========== ] 53/61 Installing : autoconf-2.69-26.fc28.no [=========== ] 53/61 Installing : autoconf-2.69-26.fc28.no [============ ] 53/61 Installing : autoconf-2.69-26.fc28.no [============= ] 53/61 Installing : autoconf-2.69-26.fc28.no [============== ] 53/61 Installing : autoconf-2.69-26.fc28.no [=============== ] 53/61 Installing : autoconf-2.69-26.fc28.no [================ ] 53/61 Installing : autoconf-2.69-26.fc28.no [================= ] 53/61 Installing : autoconf-2.69-26.fc28.no [================== ] 53/61 Installing : autoconf-2.69-26.fc28.no [=================== ] 53/61 Installing : autoconf-2.69-26.fc28.no [==================== ] 53/61 Installing : autoconf-2.69-26.fc28.no [===================== ] 53/61 Installing : autoconf-2.69-26.fc28.no [====================== ] 53/61 Installing : autoconf-2.69-26.fc28.no [======================= ] 53/61 Installing : autoconf-2.69-26.fc28.no [======================== ] 53/61 Installing : autoconf-2.69-26.fc28.noarch 53/61 Running scriptlet: autoconf-2.69-26.fc28.noarch 53/61 Installing : automake-1.15.1-3.fc28.n [ ] 54/61 Installing : automake-1.15.1-3.fc28.n [= ] 54/61 Installing : automake-1.15.1-3.fc28.n [== ] 54/61 Installing : automake-1.15.1-3.fc28.n [=== ] 54/61 Installing : automake-1.15.1-3.fc28.n [==== ] 54/61 Installing : automake-1.15.1-3.fc28.n [===== ] 54/61 Installing : automake-1.15.1-3.fc28.n [====== ] 54/61 Installing : automake-1.15.1-3.fc28.n [======= ] 54/61 Installing : automake-1.15.1-3.fc28.n [======== ] 54/61 Installing : automake-1.15.1-3.fc28.n [========= ] 54/61 Installing : automake-1.15.1-3.fc28.n [========== ] 54/61 Installing : automake-1.15.1-3.fc28.n [=========== ] 54/61 Installing : automake-1.15.1-3.fc28.n [============ ] 54/61 Installing : automake-1.15.1-3.fc28.n [============= ] 54/61 Installing : automake-1.15.1-3.fc28.n [============== ] 54/61 Installing : automake-1.15.1-3.fc28.n [=============== ] 54/61 Installing : automake-1.15.1-3.fc28.n [================ ] 54/61 Installing : automake-1.15.1-3.fc28.n [================= ] 54/61 Installing : automake-1.15.1-3.fc28.n [================== ] 54/61 Installing : automake-1.15.1-3.fc28.n [=================== ] 54/61 Installing : automake-1.15.1-3.fc28.n [==================== ] 54/61 Installing : automake-1.15.1-3.fc28.n [===================== ] 54/61 Installing : automake-1.15.1-3.fc28.n [====================== ] 54/61 Installing : automake-1.15.1-3.fc28.n [======================= ] 54/61 Installing : automake-1.15.1-3.fc28.n [======================== ] 54/61 Installing : automake-1.15.1-3.fc28.noarch 54/61 Running scriptlet: automake-1.15.1-3.fc28.noarch 54/61 Installing : libtool-2.4.6-21.fc27.ri [ ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [=== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [==== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [===== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [====== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [======= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [======== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [========= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [========== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [============ ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [============= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [============== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [================ ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [================= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [================== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 55/61 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 55/61 Installing : libtool-2.4.6-21.fc27.riscv64 55/61 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 55/61 Installing : libX11-common-1.6.5-5.fc [ ] 56/61 Installing : libX11-common-1.6.5-5.fc [= ] 56/61 Installing : libX11-common-1.6.5-5.fc [== ] 56/61 Installing : libX11-common-1.6.5-5.fc [=== ] 56/61 Installing : libX11-common-1.6.5-5.fc [==== ] 56/61 Installing : libX11-common-1.6.5-5.fc [===== ] 56/61 Installing : libX11-common-1.6.5-5.fc [====== ] 56/61 Installing : libX11-common-1.6.5-5.fc [======= ] 56/61 Installing : libX11-common-1.6.5-5.fc [======== ] 56/61 Installing : libX11-common-1.6.5-5.fc [========= ] 56/61 Installing : libX11-common-1.6.5-5.fc [========== ] 56/61 Installing : libX11-common-1.6.5-5.fc [=========== ] 56/61 Installing : libX11-common-1.6.5-5.fc [============ ] 56/61 Installing : libX11-common-1.6.5-5.fc [============= ] 56/61 Installing : libX11-common-1.6.5-5.fc [============== ] 56/61 Installing : libX11-common-1.6.5-5.fc [=============== ] 56/61 Installing : libX11-common-1.6.5-5.fc [================ ] 56/61 Installing : libX11-common-1.6.5-5.fc [================= ] 56/61 Installing : libX11-common-1.6.5-5.fc [================== ] 56/61 Installing : libX11-common-1.6.5-5.fc [=================== ] 56/61 Installing : libX11-common-1.6.5-5.fc [==================== ] 56/61 Installing : libX11-common-1.6.5-5.fc [===================== ] 56/61 Installing : libX11-common-1.6.5-5.fc [====================== ] 56/61 Installing : libX11-common-1.6.5-5.fc [======================= ] 56/61 Installing : libX11-common-1.6.5-5.fc [======================== ] 56/61 Installing : libX11-common-1.6.5-5.fc28.noarch 56/61 Installing : libX11-1.6.5-5.fc28.risc [ ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [=== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [==== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [===== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [====== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [======= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [======== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [========= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [========== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [=========== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [============ ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [============= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [============== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [=============== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [================ ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [================= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [================== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [=================== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [==================== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [===================== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [====================== ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [======================= ] 57/61 Installing : libX11-1.6.5-5.fc28.risc [======================== ] 57/61 Installing : libX11-1.6.5-5.fc28.riscv64 57/61 Running scriptlet: libX11-1.6.5-5.fc28.riscv64 57/61 Installing : libX11-xcb-1.6.5-5.fc28. [ ] 58/61 Installing : libX11-xcb-1.6.5-5.fc28. [===================== ] 58/61 Installing : libX11-xcb-1.6.5-5.fc28. [======================== ] 58/61 Installing : libX11-xcb-1.6.5-5.fc28.riscv64 58/61 Installing : libX11-devel-1.6.5-5.fc2 [ ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [=== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [==== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [===== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [====== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [======= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [======== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [========= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [========== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [=========== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [============ ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [============= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [============== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [=============== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [================ ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [================= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [=================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [==================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [===================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [====================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [======================= ] 59/61 Installing : libX11-devel-1.6.5-5.fc2 [======================== ] 59/61 Installing : libX11-devel-1.6.5-5.fc28.riscv64 59/61 Installing : xorg-x11-util-macros-1.1 [ ] 60/61 Installing : xorg-x11-util-macros-1.1 [===== ] 60/61 Installing : xorg-x11-util-macros-1.1 [========== ] 60/61 Installing : xorg-x11-util-macros-1.1 [=========== ] 60/61 Installing : xorg-x11-util-macros-1.1 [================ ] 60/61 Installing : xorg-x11-util-macros-1.1 [===================== ] 60/61 Installing : xorg-x11-util-macros-1.1 [====================== ] 60/61 Installing : xorg-x11-util-macros-1.1 [======================== ] 60/61 Installing : xorg-x11-util-macros-1.19.0-5.fc24.noarch 60/61 Installing : xmlto-0.0.28-5.fc27.risc [ ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [====== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [========== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [============== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [=================== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [==================== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [===================== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [====================== ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [======================= ] 61/61 Installing : xmlto-0.0.28-5.fc27.risc [======================== ] 61/61 Installing : xmlto-0.0.28-5.fc27.riscv64 61/61 Running scriptlet: xmlto-0.0.28-5.fc27.riscv64 61/61 Verifying : libX11-devel-1.6.5-5.fc28.riscv64 1/61 Verifying : xmlto-0.0.28-5.fc27.riscv64 2/61 Verifying : xorg-x11-util-macros-1.19.0-5.fc24.noarch 3/61 Verifying : libX11-1.6.5-5.fc28.riscv64 4/61 Verifying : libX11-xcb-1.6.5-5.fc28.riscv64 5/61 Verifying : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 6/61 Verifying : libX11-common-1.6.5-5.fc28.noarch 7/61 Verifying : libxcb-1.12-5.0.riscv64.fc28.riscv64 8/61 Verifying : autoconf-2.69-26.fc28.noarch 9/61 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 10/61 Verifying : automake-1.15.1-3.fc28.noarch 11/61 Verifying : libXau-devel-1.0.8-11.fc28.riscv64 12/61 Verifying : libXau-1.0.8-11.fc28.riscv64 13/61 Verifying : libtool-2.4.6-21.fc27.riscv64 14/61 Verifying : tar-2:1.29-7.fc27.riscv64 15/61 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 16/61 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 17/61 Verifying : pkgconf-1.4.1-1.fc27.riscv64 18/61 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 19/61 Verifying : xorg-x11-proto-devel-7.7-20.fc25.noarch 20/61 Verifying : docbook-dtds-1.0-68.fc28.noarch 21/61 Verifying : sgml-common-0.6.3-47.fc28.noarch 22/61 Verifying : xml-common-0.6.3-47.fc28.noarch 23/61 Verifying : docbook-style-xsl-1.79.2-6.fc28.noarch 24/61 Verifying : flex-2.6.1-5.fc27.riscv64 25/61 Verifying : libxslt-1.1.28-13.fc28.riscv64 26/61 Verifying : m4-1.4.18-5.fc28.riscv64 27/61 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 28/61 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 29/61 Verifying : perl-File-Path-2.15-1.fc27.noarch 30/61 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 31/61 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 32/61 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 33/61 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 34/61 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 35/61 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 36/61 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 37/61 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 38/61 Verifying : perl-threads-1:2.21-1.fc27.riscv64 39/61 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 40/61 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 41/61 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 42/61 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 43/61 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 44/61 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 45/61 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 46/61 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 47/61 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 48/61 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 49/61 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 50/61 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 51/61 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 52/61 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 53/61 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 54/61 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 55/61 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 56/61 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 57/61 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 58/61 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 59/61 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 60/61 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 61/61 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 libX11-devel.riscv64 1.6.5-5.fc28 libXau-devel.riscv64 1.0.8-11.fc28 libtool.riscv64 2.4.6-21.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 xmlto.riscv64 0.0.28-5.fc27 xorg-x11-proto-devel.noarch 7.7-20.fc25 xorg-x11-util-macros.noarch 1.19.0-5.fc24 docbook-dtds.noarch 1.0-68.fc28 docbook-style-xsl.noarch 1.79.2-6.fc28 emacs-filesystem.noarch 1:25.3-5.fc28 flex.riscv64 2.6.1-5.fc27 libX11.riscv64 1.6.5-5.fc28 libX11-common.noarch 1.6.5-5.fc28 libX11-xcb.riscv64 1.6.5-5.fc28 libXau.riscv64 1.0.8-11.fc28 libpkgconf.riscv64 1.4.1-1.fc27 libxcb.riscv64 1.12-5.0.riscv64.fc28 libxcb-devel.riscv64 1.12-5.0.riscv64.fc28 libxslt.riscv64 1.1.28-13.fc28 m4.riscv64 1.4.18-5.fc28 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 sgml-common.noarch 0.6.3-47.fc28 tar.riscv64 2:1.29-7.fc27 xml-common.noarch 0.6.3-47.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:07:03 ago on Thu Feb 22 15:46:35 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:07:22 ago on Thu Feb 22 15:46:35 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group info bzip2 cpio gzip rpm-build diffutils shadow-utils findutils tar make util-linux bash grep patch redhat-rpm-config which xz sed gawk fedora-release coreutils unzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 26 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 780 kB/s | 75 kB 00:00 (2-3/26): make-4.2.1 1% [ ] 1.5 MB/s | 235 kB 00:07 ETA (2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 303 kB/s | 7.6 kB 00:00 (3-4/26): make-4.2.1 2% [ ] 1.5 MB/s | 274 kB 00:07 ETA (3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 319 kB/s | 7.8 kB 00:00 (4-5/26): make-4.2.1 2% [- ] 1.5 MB/s | 314 kB 00:07 ETA (4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 275 kB/s | 6.6 kB 00:00 (5-6/26): make-4.2.1 2% [- ] 1.5 MB/s | 353 kB 00:07 ETA (5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 373 kB/s | 9.0 kB 00:00 (6-7/26): make-4.2.1 3% [- ] 1.5 MB/s | 394 kB 00:07 ETA (6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 330 kB/s | 8.0 kB 00:00 (7-8/26): make-4.2.1 3% [- ] 1.5 MB/s | 434 kB 00:07 ETA (7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 908 kB/s | 235 kB 00:00 (8-9/26): diffutils- 9% [=- ] 1.5 MB/s | 1.1 MB 00:06 ETA (8/26): make-4.2.1-6.fc27.riscv64.rpm 595 kB/s | 486 kB 00:00 (9-10/26): diffutils 11% [== ] 1.5 MB/s | 1.4 MB 00:06 ETA (9/26): which-2.21-4.fc28.riscv64.rpm 718 kB/s | 65 kB 00:00 (10-11/26): diffutil 13% [==- ] 1.5 MB/s | 1.6 MB 00:06 ETA (10/26): diffutils-3.6-3.fc28.riscv64.rpm 532 kB/s | 577 kB 00:01 (11-12/26): zstd-1.3 14% [==- ] 1.5 MB/s | 1.6 MB 00:06 ETA (11/26): patch-2.7.5-6.fc27.riscv64.rpm 685 kB/s | 270 kB 00:00 (12-13/26): zstd-1.3 20% [==== ] 1.6 MB/s | 2.4 MB 00:05 ETA (12/26): unzip-6.0-36.fc28.riscv64.rpm 815 kB/s | 398 kB 00:00 (13-14/26): zstd-1.3 24% [====- ] 1.6 MB/s | 2.8 MB 00:05 ETA (13/26): xz-5.2.3-5.fc28.riscv64.rpm 666 kB/s | 212 kB 00:00 (14-15/26): bzip2-1. 25% [===== ] 1.6 MB/s | 3.0 MB 00:05 ETA (14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 471 kB/s | 81 kB 00:00 (15-16/26): elfutils 26% [===== ] 1.6 MB/s | 3.1 MB 00:05 ETA (15/26): file-5.32-3.fc28.riscv64.rpm 714 kB/s | 81 kB 00:00 (16-17/26): elfutils 28% [=====- ] 1.6 MB/s | 3.3 MB 00:05 ETA (16-18/26): binutils 35% [======= ] 1.7 MB/s | 4.2 MB 00:04 ETA (16/26): zstd-1.3.3-1.fc27.riscv64.rpm 659 kB/s | 1.1 MB 00:01 (17-18/26): binutils 38% [=======- ] 1.6 MB/s | 4.4 MB 00:04 ETA (17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 298 kB/s | 7.5 kB 00:00 (18-19/26): binutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA (18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 322 kB/s | 8.2 kB 00:00 (19-20/26): binutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA (19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 354 kB/s | 8.8 kB 00:00 (20-21/26): binutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (20/26): go-srpm-macros-2-11.fc28.noarch.rpm 335 kB/s | 8.4 kB 00:00 (21-22/26): elfutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 377 kB/s | 9.7 kB 00:00 (22-23/26): elfutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA (22/26): python-srpm-macros-3-26.fc28.noarch.rp 412 kB/s | 10 kB 00:00 (23-24/26): elfutils 40% [======== ] 1.6 MB/s | 4.7 MB 00:04 ETA (23/26): dwz-0.12-5.fc28.riscv64.rpm 876 kB/s | 108 kB 00:00 (24-25/26): elfutils 42% [========- ] 1.6 MB/s | 5.0 MB 00:04 ETA (24/26): elfutils-0.170-4.fc28.riscv64.rpm 579 kB/s | 791 kB 00:01 (25-26/26): binutils 45% [========= ] 1.6 MB/s | 5.3 MB 00:04 ETA (25/26): zip-3.0-20.fc28.riscv64.rpm 783 kB/s | 271 kB 00:00 (26/26): binutils-2. 48% [=========- ] 1.6 MB/s | 5.6 MB 00:03 ETA (26/26): binutils-2. 55% [=========== ] 1.7 MB/s | 6.5 MB 00:03 ETA (26/26): binutils-2. 62% [============- ] 1.8 MB/s | 7.4 MB 00:02 ETA (26/26): binutils-2. 70% [============== ] 1.8 MB/s | 8.2 MB 00:01 ETA (26/26): binutils-2. 77% [===============- ] 1.9 MB/s | 9.1 MB 00:01 ETA (26/26): binutils-2. 85% [================= ] 1.9 MB/s | 9.9 MB 00:00 ETA (26/26): binutils-2. 92% [================== ] 2.0 MB/s | 11 MB 00:00 ETA (26/26): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 1/26 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv64 2/26 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 3/26 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 4/26 Installing : python-srpm-macros-3-26. [ ] 5/26 Installing : python-srpm-macros-3-26. [======================= ] 5/26 Installing : python-srpm-macros-3-26.fc28.noarch 5/26 Installing : perl-srpm-macros-1-26.fc [ ] 6/26 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26 Installing : perl-srpm-macros-1-26.fc28.noarch 6/26 Installing : go-srpm-macros-2-11.fc28 [ ] 7/26 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26 Installing : go-srpm-macros-2-11.fc28.noarch 7/26 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26 Installing : binutils-2.30-1.fc28.ris [ ] 11/26 Installing : binutils-2.30-1.fc28.ris [= ] 11/26 Installing : binutils-2.30-1.fc28.ris [== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======== ] 11/26 Installing : binutils-2.30-1.fc28.ris [========= ] 11/26 Installing : binutils-2.30-1.fc28.ris [========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [============ ] 11/26 Installing : binutils-2.30-1.fc28.ris [============= ] 11/26 Installing : binutils-2.30-1.fc28.ris [============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [================ ] 11/26 Installing : binutils-2.30-1.fc28.ris [================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26 Installing : binutils-2.30-1.fc28.riscv64 11/26 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26 Installing : elfutils-0.170-4.fc28.ri [ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26 Installing : elfutils-0.170-4.fc28.riscv64 12/26 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.riscv64 13/26 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 14/26 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv64 15/26 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv64 16/26 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26 Installing : rust-srpm-macros-5-1.fc28.noarch 17/26 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26 Installing : openblas-srpm-macros-2-2 [ ] 19/26 Installing : openblas-srpm-macros-2-2 [================ ] 19/26 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26 Installing : nim-srpm-macros-1-1.fc28.noarch 21/26 Installing : redhat-rpm-config-96-1.f [ ] 22/26 Installing : redhat-rpm-config-96-1.f [== ] 22/26 Installing : redhat-rpm-config-96-1.f [=== ] 22/26 Installing : redhat-rpm-config-96-1.f [========= ] 22/26 Installing : redhat-rpm-config-96-1.f [=========== ] 22/26 Installing : redhat-rpm-config-96-1.f [================= ] 22/26 Installing : redhat-rpm-config-96-1.f [================== ] 22/26 Installing : redhat-rpm-config-96-1.f [=================== ] 22/26 Installing : redhat-rpm-config-96-1.f [===================== ] 22/26 Installing : redhat-rpm-config-96-1.f [====================== ] 22/26 Installing : redhat-rpm-config-96-1.f [======================== ] 22/26 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26 Installing : diffutils-3.6-3.fc28.ris [ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26 Installing : diffutils-3.6-3.fc28.riscv64 23/26 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26 Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26 Installing : which-2.21-4.fc28.riscv6 [ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26 Installing : which-2.21-4.fc28.riscv64 25/26 Running scriptlet: which-2.21-4.fc28.riscv64 25/26 Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26 Installing : make-1:4.2.1-6.fc27.riscv64 26/26 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26 Verifying : diffutils-3.6-3.fc28.riscv64 1/26 Verifying : make-1:4.2.1-6.fc27.riscv64 2/26 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26 Verifying : zstd-1.3.3-1.fc27.riscv64 10/26 Verifying : which-2.21-4.fc28.riscv64 11/26 Verifying : patch-2.7.5-6.fc27.riscv64 12/26 Verifying : unzip-6.0-36.fc28.riscv64 13/26 Verifying : xz-5.2.3-5.fc28.riscv64 14/26 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26 Verifying : elfutils-0.170-4.fc28.riscv64 16/26 Verifying : file-5.32-3.fc28.riscv64 17/26 Verifying : binutils-2.30-1.fc28.riscv64 18/26 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26 Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26 Verifying : go-srpm-macros-2-11.fc28.noarch 22/26 Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26 Verifying : python-srpm-macros-3-26.fc28.noarch 24/26 Verifying : dwz-0.12-5.fc28.riscv64 25/26 Verifying : zip-3.0-20.fc28.riscv64 26/26 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:09:14 ago on Thu Feb 22 15:46:35 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 536 kB/s | 15 kB 00:00 (2-3/4): glibc-devel 1% [ ] 598 kB/s | 46 kB 00:04 ETA (2-4/4): kernel-head 36% [======= ] 737 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 813 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 791 kB/s | 1.3 MB 00:01 ETA (3-4/4): kernel-head 87% [=================- ] 926 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 946 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 932 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 973 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off