OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Mon Feb 19 02:12:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/gzip-1.8-1.fc25.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nocheck Installing /var/tmp/gzip-1.8-1.fc25.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ohH7Jg + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf gzip-1.8 + /usr/bin/xz -dc /rpmbuild/SOURCES/gzip-1.8.tar.xz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd gzip-1.8 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + cp /rpmbuild/SOURCES/fdl-1.3.txt . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.93m5yg + umask 022 + cd /rpmbuild/BUILD + cd gzip-1.8 + export DEFS=NO_ASM + DEFS=NO_ASM + export CPPFLAGS=-DHAVE_LSTAT + CPPFLAGS=-DHAVE_LSTAT + export CC=gcc + CC=gcc + export 'CPP=gcc -E' + CPP='gcc -E' + export CXX=g++ + CXX=g++ + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./build-aux/config.guess ++ basename ./build-aux/config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./build-aux/config.guess '/usr/lib/rpm/redhat/config.guess' -> './build-aux/config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./build-aux/config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./build-aux/config.sub ++ basename ./build-aux/config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./build-aux/config.sub '/usr/lib/rpm/redhat/config.sub' -> './build-aux/config.sub' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for riscv64-redhat-linux-gnu-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for riscv64-redhat-linux-gnu-nm... no checking for nm... nm checking whether ln -s works... yes checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking for a POSIX-compliant shell... /bin/sh checking for sys/types.h... yes checking for sys/stat.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for sys/param.h... yes checking for sys/socket.h... yes checking for dirent.h... yes checking for features.h... yes checking for getopt.h... yes checking for sys/time.h... yes checking for math.h... yes checking for sys/mman.h... yes checking for wchar.h... yes checking for utime.h... yes checking for fcntl.h... yes checking for limits.h... yes checking for memory.h... yes checking for time.h... yes random: crng init done checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for egrep... /usr/bin/grep -E checking for Minix Amsterdam compiler... no checking for riscv64-redhat-linux-gnu-ar... no checking for riscv64-redhat-linux-gnu-lib... no checking for riscv64-redhat-linux-gnu-link... no checking for ar... ar checking the archiver (ar) interface... ar checking for riscv64-redhat-linux-gnu-ar... ar checking for _LARGEFILE_SOURCE value needed for large files... no checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking whether malloc, realloc, calloc are POSIX compliant... yes checking for _set_invalid_parameter_handler... no checking for fchdir... yes checking for fdopendir... yes checking for strerror_r... yes checking for fcntl... yes checking for symlink... yes checking for mempcpy... yes checking for vasnprintf... no checking for snprintf... yes checking for fpurge... no checking for __fpurge... yes checking for __freading... yes checking for __fseterr... no checking for fstatat... yes checking for fsync... yes checking for getdtablesize... yes checking for gettimeofday... yes checking for nanotime... no checking for lstat... yes checking for mprotect... yes checking for openat... yes checking for __xpg_strerror_r... yes checking for strdup... yes checking for catgets... yes checking for pipe... yes checking for unlinkat... yes checking for futimes... yes checking for futimesat... yes checking for futimens... yes checking for utimensat... yes checking for lutimes... yes checking for chown... yes checking for fchmod... yes checking for fchown... yes checking for siginterrupt... yes checking whether the preprocessor supports include_next... yes checking whether system header files limit the line length... no checking how gcc reports undeclared, standard C functions... error checking whether // is distinct from /... no checking for complete errno.h... yes checking whether strerror_r is declared... yes checking whether strerror_r returns char *... yes checking whether fchdir is declared... yes checking for working fcntl.h... yes checking for pid_t... yes checking for mode_t... yes checking for promoted mode_t type... mode_t checking whether fdatasync is declared... yes checking for stdint.h... yes checking for inttypes.h... yes checking whether printf supports size specifiers as in C99... yes checking whether printf supports 'long double' arguments... yes checking whether printf supports infinite 'double' arguments... yes checking whether byte ordering is bigendian... no checking whether long double and double are the same... no checking whether printf supports infinite 'long double' arguments... yes checking whether printf supports the 'a' and 'A' directives... yes checking whether printf supports the 'F' directive... yes checking whether printf supports the 'n' directive... no checking whether printf supports the 'ls' directive... yes checking whether printf supports POSIX/XSI format strings with positions... yes checking whether printf supports the grouping flag... yes checking whether printf supports the left-adjust flag correctly... yes checking whether printf supports the zero flag correctly... yes checking whether printf supports large precisions... yes checking whether printf survives out-of-memory conditions... yes checking for unsigned long long int... yes checking for long long int... yes checking for wchar_t... yes checking for wint_t... yes checking for intmax_t... yes checking where to find the exponent in a 'double'... word 1 bit 20 checking whether snprintf returns a byte count as in C99... yes checking for snprintf... (cached) yes checking for strnlen... yes checking for wcslen... yes checking for wcsnlen... yes checking for mbrtowc... yes checking for wcrtomb... yes checking whether _snprintf is declared... no checking whether frexp() can be used without linking with libm... yes checking whether alarm is declared... yes checking whether stdin defaults to large file offsets... yes checking whether fseeko is declared... yes checking for fseeko... yes checking whether fflush works on input streams... no checking whether stat file-mode macros are broken... no checking for nlink_t... yes checking whether lstat correctly handles trailing slash... yes checking whether ftello is declared... yes checking for ftello... yes checking whether ftello works... yes checking whether getcwd (NULL, 0) allocates memory for result... yes checking for getcwd with POSIX signature... yes checking whether getdtablesize is declared... yes checking for getopt.h... (cached) yes checking for getopt_long_only... yes checking whether getopt is POSIX compatible... yes checking for working GNU getopt function... yes checking for working GNU getopt_long function... yes checking whether getenv is declared... yes checking for C/C++ restrict keyword... __restrict checking for struct timeval... yes checking for wide-enough struct timeval.tv_sec member... yes checking where to find the exponent in a 'float'... word 0 bit 23 checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking whether imported symbols can be declared weak... yes checking for pthread.h... yes checking for multithread API to use... posix checking for a sed that does not truncate output... /usr/bin/sed checking for mmap... yes checking for MAP_ANONYMOUS... yes checking whether memchr works... yes checking whether memrchr is declared... yes checking whether strerror(0) succeeds... yes checking for strerror_r with POSIX signature... no checking whether __xpg_strerror_r works... yes checking for ptrdiff_t... yes checking whether C symbols are prefixed with underscore at the linker level... no checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking whether stdint.h conforms to C99... yes checking whether stdint.h predates C++11... no checking whether strdup is declared... yes checking for struct timespec in ... yes checking whether the utimes function works... yes checking for struct utimbuf... yes checking whether uses 'inline' correctly... yes checking for alloca as a compiler built-in... yes checking for GNU libc compatible calloc... yes checking whether this system has an arbitrary file name length limit... yes checking for library containing clock_gettime... none required checking for clock_gettime... yes checking for clock_settime... yes checking for closedir... yes checking for dirfd... yes checking whether dirfd is declared... yes checking whether dirfd is a macro... no checking whether // is distinct from /... (cached) no checking whether dup works... yes checking whether dup2 works... yes checking for error_at_line... yes checking whether fflush works on input streams... (cached) no checking whether fcntl handles F_DUPFD correctly... yes checking whether fcntl understands F_DUPFD_CLOEXEC... needs runtime check checking for library containing fdatasync... none required checking whether fdopendir is declared... yes checking whether fdopendir works... yes checking whether fflush works on input streams... (cached) no checking whether conversion from 'int' to 'long double' works... yes checking for ptrdiff_t... (cached) yes checking whether fpurge is declared... no checking whether frexp works... yes checking whether frexpl is declared... yes checking whether frexpl() can be used without linking with libm... yes checking whether frexpl works... yes checking for fseeko... (cached) yes checking whether fflush works on input streams... (cached) no checking for _fseeki64... no checking whether fstatat (..., 0) works... yes checking for ftello... (cached) yes checking whether ftello works... (cached) yes checking whether getdtablesize works... yes checking whether gettimeofday clobbers localtime buffer... no checking for gettimeofday with POSIX signature... almost checking whether isnan(double) can be used without linking with libm... yes checking whether isnan(float) can be used without linking with libm... yes checking whether isnan(float) works... yes checking whether isnan(long double) can be used without linking with libm... yes checking whether isnanl works... yes checking for C compiler flag to ignore unused libraries... -Wl,--as-needed checking for pthread_rwlock_t... yes checking whether lseek detects pipes... yes checking for stdlib.h... yes checking for GNU libc compatible malloc... yes checking whether NAN macro works... yes checking whether HUGE_VAL works... yes checking for mempcpy... (cached) yes checking for memrchr... yes checking whether open recognizes a trailing slash... yes checking for opendir... yes checking whether perror matches strerror... yes checking whether frexp works... (cached) yes checking whether ldexp can be used without linking with libm... yes checking whether frexpl() can be used without linking with libm... (cached) yes checking whether frexpl works... (cached) yes checking whether frexpl is declared... (cached) yes checking whether ldexpl() can be used without linking with libm... yes checking whether ldexpl works... yes checking whether ldexpl is declared... yes checking for readdir... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking whether rmdir works... yes checking for signbit macro... yes checking for signbit compiler built-ins... yes checking for stdint.h... (cached) yes checking for SIZE_MAX... yes checking for ssize_t... yes checking whether stat handles trailing slashes on directories... yes checking whether stat handles trailing slashes on files... yes checking for struct stat.st_atim.tv_nsec... yes checking whether struct stat.st_atim is of type struct timespec... yes checking for struct stat.st_birthtimespec.tv_nsec... no checking for struct stat.st_birthtimensec... no checking for struct stat.st_birthtim.tv_nsec... no checking for max_align_t... yes checking whether NULL can be used in arbitrary expressions... yes checking which flavor of printf attribute matches inttypes macros... system checking for stpcpy... yes checking for working strerror function... yes checking for nlink_t... (cached) yes checking whether unlink honors trailing slashes... yes checking whether unlink of a parent directory fails as it should... guessing yes checking for ptrdiff_t... (cached) yes checking for ptrdiff_t... (cached) yes checking for stdint.h... (cached) yes checking for underline in external names... no checking for an assembler syntax supported by this package... no checking for library containing strerror... none required checking for an ANSI C-conforming const... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking return type of signal handlers... void checking for size_t... (cached) yes checking for off_t... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating lib/Makefile config.status: creating tests/Makefile config.status: creating lib/config.h config.status: executing depfiles commands + make GEN version.c GEN version.h make all-recursive make[1]: Entering directory '/rpmbuild/BUILD/gzip-1.8' Making all in lib make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/lib' GEN alloca.h GEN c++defs.h GEN arg-nonnull.h GEN warn-on-use.h GEN dirent.h GEN fcntl.h GEN math.h GEN unused-parameter.h GEN stdio.h GEN stdlib.h GEN string.h GEN sys/stat.h GEN sys/time.h GEN sys/types.h GEN time.h GEN unistd.h GEN wchar.h make all-am make[3]: Entering directory '/rpmbuild/BUILD/gzip-1.8/lib' CC cloexec.o CC opendir-safer.o CC dirname-lgpl.o CC basename-lgpl.o CC stripslash.o CC exitfail.o CC creat-safer.o CC open-safer.o CC fd-hook.o CC filenamecat-lgpl.o CC freading.o CC gettime.o CC glthread/lock.o CC math.o CC openat-die.o CC openat-safer.o CC printf-frexp.o CC printf-frexpl.o CC save-cwd.o CC savedir.o CC stat-time.o CC statat.o CC glthread/threadlib.o CC timespec.o CC unistd.o CC dup-safer.o CC fd-safer.o CC pipe-safer.o CC utimens.o CC xmalloc.o CC xalloc-die.o CC xsize.o CC yesno.o CC asnprintf.o CC chdir-long.o CC fclose.o CC fcntl.o CC fflush.o CC fprintf.o CC fpurge.o CC fseek.o CC fseeko.o CC fseterr.o CC openat-proc.o CC printf.o CC printf-args.o CC printf-parse.o CC strerror_r.o CC vasnprintf.o CC vfprintf.o AR libgzip.a make[3]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/lib' make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/lib' Making all in doc make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/doc' Making all in . make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8' CC version.o AR libver.a CC bits.o CC deflate.o CC gzip.o CC inflate.o CC lzw.o CC trees.o CC unlzh.o CC unlzw.o CC unpack.o CC unzip.o CC util.o CC zip.o CCLD gzip GEN gunzip GEN gzexe GEN zcat GEN zcmp GEN zdiff GEN zegrep GEN zfgrep GEN zforce GEN zgrep GEN zless GEN zmore GEN znew make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' Making all in tests make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/tests' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/tests' make[1]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.NsCwfc + umask 022 + cd /rpmbuild/BUILD + '[' /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 '!=' / ']' + rm -rf /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 ++ dirname /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 + mkdir -p /rpmbuild/BUILDROOT + mkdir /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 + cd gzip-1.8 + rm -rf /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 + echo 'warning: %makeinstall is deprecated, try %make_install instead' warning: %makeinstall is deprecated, try %make_install instead + /usr/bin/make prefix=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr exec_prefix=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr bindir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin sbindir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/sbin sysconfdir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/etc datadir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share includedir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/include libdir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/lib64 libexecdir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/libexec localstatedir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/var sharedstatedir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/var/lib mandir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/man infodir=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info install /usr/bin/make install-recursive make[1]: Entering directory '/rpmbuild/BUILD/gzip-1.8' Making install in lib make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/lib' /usr/bin/make install-am make[3]: Entering directory '/rpmbuild/BUILD/gzip-1.8/lib' make[4]: Entering directory '/rpmbuild/BUILD/gzip-1.8/lib' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/lib' make[3]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/lib' make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/lib' Making install in doc make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/doc' make[3]: Entering directory '/rpmbuild/BUILD/gzip-1.8/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info' /usr/bin/install -c -m 644 ./gzip.info '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info' install-info --info-dir='/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info' '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info/gzip.info' make[3]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/doc' make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/doc' Making install in . make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8' make[3]: Entering directory '/rpmbuild/BUILD/gzip-1.8' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin' /usr/bin/install -c gzip '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin' /usr/bin/install -c gunzip gzexe zcat zcmp zdiff zegrep zfgrep zforce zgrep zless zmore znew '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin' /usr/bin/make install-exec-hook make[4]: Entering directory '/rpmbuild/BUILD/gzip-1.8' + cd /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin + rm -f uncompress + case remove-installed-links in + cd /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/bin + rm -f uncompress + case install-exec-hook in + ln gunzip uncompress make[4]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' /usr/bin/mkdir -p '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/man/man1' /usr/bin/install -c -m 644 gunzip.1 gzexe.1 gzip.1 zcat.1 zcmp.1 zdiff.1 zforce.1 zgrep.1 zless.1 zmore.1 znew.1 '/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/man/man1' make[3]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' Making install in tests make[2]: Entering directory '/rpmbuild/BUILD/gzip-1.8/tests' make[3]: Entering directory '/rpmbuild/BUILD/gzip-1.8/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/tests' make[2]: Leaving directory '/rpmbuild/BUILD/gzip-1.8/tests' make[1]: Leaving directory '/rpmbuild/BUILD/gzip-1.8' + gzip -9nf /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info/gzip.info + rm -f /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/info/dir + rm -f /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64//usr/bin/uncompress + mkdir -p /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/etc/profile.d + install -p -m 644 /rpmbuild/SOURCES/colorzgrep.csh /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/etc/profile.d + install -p -m 644 /rpmbuild/SOURCES/colorzgrep.sh /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/etc/profile.d + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig /sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1 + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/redhat/brp-mangle-shebangs Processing files: gzip-1.8-1.fc28.riscv64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Uw7rgQ + umask 022 + cd /rpmbuild/BUILD + cd gzip-1.8 + DOCDIR=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr NEWS /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr README /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr AUTHORS /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr ChangeLog /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr THANKS /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + cp -pr TODO /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/doc/gzip + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Kx4GIc + umask 022 + cd /rpmbuild/BUILD + cd gzip-1.8 + LICENSEDIR=/rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/licenses/gzip + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/licenses/gzip + cp -pr COPYING /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/licenses/gzip + cp -pr fdl-1.3.txt /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64/usr/share/licenses/gzip + exit 0 Provides: /bin/gunzip /bin/gzip /bin/zcat bundled(gnulib) gzip = 1.8-1.fc28 gzip(riscv-64) = 1.8-1.fc28 Requires(interp): /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh Requires(preun): /bin/sh Requires: /bin/sh ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) rtld(GNU_HASH) Conflicts: filesystem < 3 Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 warning: Could not canonicalize hostname: stage4-builder Wrote: /rpmbuild/RPMS/riscv64/gzip-1.8-1.fc28.riscv64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.pyf6TV + umask 022 + cd /rpmbuild/BUILD + cd gzip-1.8 + /usr/bin/rm -rf /rpmbuild/BUILDROOT/gzip-1.8-1.fc28.riscv64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.oZISuZ + umask 022 + cd /rpmbuild/BUILD + rm -rf gzip-1.8 + exit 0 + touch /buildok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off