[ 0.0] Examining the guest ... [ 14.4] Setting a random seed [ 14.4] Installing firstboot script: /mnt/tmp/riscv64/tmp/guile22.UYN8hr/guile22-boot.sh [ 14.5] Copying: /mnt/tmp/riscv64/tmp/guile22.UYN8hr/guile22-2.2.2-1.fc27.src.rpm to /var/tmp [ 14.6] Copying: /mnt/tmp/riscv64/tmp/guile22.UYN8hr/local.repo to /etc/yum.repos.d/ [ 14.7] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 3 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 3 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded virtio_blk virtio0: [vda] 41943040 512-byte logical blocks (21.5 GB/20.0 GiB) libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Reached target Paths. [ OK ] Reached target Paths. systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ OK ] Listening on Journal Socket. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Process Core Dump Socket. Starting Remount Root and Kernel File Systems... [ OK ] Created slice system-sshd\x2dkeygen.slice. Starting Apply Kernel Variables... Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). EXT4-fs (vda): re-mounted. Opts: (null) Starting Journal Service... [ OK ] Reached target Slices. Mounting Temporary Directory (/tmp)... [ OK ] Listening on Network Service Netlink Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. systemd[1]: Mounted Temporary Directory (/tmp). [ OK ] Mounted Temporary Directory (/tmp). systemd[1]: Starting Configure read-only root support... Starting Configure read-only root support... systemd[1]: Starting Rebuild Hardware Database... Starting Rebuild Hardware Database... systemd[1]: Starting Create System Users... Starting Create System Users... systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Configure read-only root support. [ OK ] Started Create System Users. systemd-journald[85]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for dev-ttyS0.device (16s / 1min 30s) [** ] (1 of 3) A start job is running for dev-ttyS0.device (16s / 1min 30s) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Kernel Device Manager... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Started dnf makecache timer. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH ed25519 Server Key Generation... Starting OpenSSH ecdsa Server Key Generation... Starting Login Service... Starting OpenSSH rsa Server Key Generation... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Network Service... [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Found device /dev/ttyS0. [ OK ] Started Network Service. [*** ] (1 of 2) A start job is running for…er Key Generation (33s / no limit) [ OK ] Started Login Service. Starting Wait for Network to be Configured... [ OK ] Reached target Network. Starting libguestfs firstboot service... Starting Permit User Sessions... [ OK ] Started OpenSSH rsa Server Key Generation. firstboot.sh[149]: /usr/lib/virt-sysprep/firstboot.sh start firstboot.sh[149]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Wait for Network to be Configured. [ OK ] Started Permit User Sessions. firstboot.sh[149]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-guile22-UYN8hr-guile22-boot-sh === firstboot.sh[149]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[149]: + set -e firstboot.sh[149]: + exec random: crng init done [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.16.0-rc2-00328-gebea62367bc4 on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: lt-guile[21572]: unhandled signal 11 code 0x1 at 0xffffffd5547ef7d7 CPU: 1 PID: 21572 Comm: lt-guile Tainted: G W 4.16.0-rc2-00328-gebea62367bc4 #4 sepc: 0000002000140768 ra : 000000200013dc8e sp : 000000200108b0d0 gp : 0000002aaaaac8a0 tp : 000000200108c8e0 t0 : 00000000003f0100 t1 : 000000200005384c t2 : 0000002aaaaad021 s0 : 00000020001540c0 s1 : ffffffd5547ef7d7 a0 : 0000000000000018 a1 : 0000000000000001 a2 : 0000002aab145180 a3 : 000000000000266a a4 : 0000002000154090 a5 : 0000000000000010 a6 : 0000000000000000 a7 : 0000000000000100 s2 : 0000000000000002 s3 : 00000020001960a8 s4 : 0000002000195be8 s5 : 0000000000000018 s6 : 00000000000002b2 s7 : 0000002aab80f908 s8 : 0000000000000373 s9 : 0000002aab7646c8 s10: 0000002aaac10de0 s11: 0000000000001b73 t3 : 000000200013ddf0 t4 : 0000000000000002 t5 : 0000002aaabce000 t6 : 0000000000000000 sstatus: 8000000000006020 sbadaddr: ffffffd5547ef7d7 scause: 000000000000000d qemu-system-riscv64: terminating on signal 15 from pid 3150 (-bash) *stdin*:3: libguestfs: error: download: /buildok: No such file or directory