OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 21 14:42:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/git-2.16.2-1.0.riscv64.fc27.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/git.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 7% [=- ] 2.8 MB/s | 879 kB 00:03 ETA Local RPMS 15% [=== ] 2.8 MB/s | 1.7 MB 00:03 ETA Local RPMS 23% [====- ] 2.9 MB/s | 2.7 MB 00:03 ETA Local RPMS 32% [======- ] 2.9 MB/s | 3.7 MB 00:02 ETA Local RPMS 41% [======== ] 2.9 MB/s | 4.8 MB 00:02 ETA Local RPMS 50% [========== ] 3.0 MB/s | 5.8 MB 00:01 ETA Local RPMS 58% [===========- ] 2.8 MB/s | 6.7 MB 00:01 ETA Local RPMS 67% [============= ] 2.8 MB/s | 7.7 MB 00:01 ETA Local RPMS 75% [=============== ] 2.8 MB/s | 8.6 MB 00:00 ETA Local RPMS 84% [================- ] 2.8 MB/s | 9.6 MB 00:00 ETA Local RPMS 92% [================== ] 2.9 MB/s | 11 MB 00:00 ETA Local RPMS 2.4 MB/s | 11 MB 00:04 Last metadata expiration check: 0:01:20 ago on Wed Feb 21 14:42:36 2018. sh: /usr/bin/perl: No such file or directory sh: /usr/bin/perl: No such file or directory sh: /usr/bin/perl: No such file or directory sh: /usr/bin/perl: No such file or directory Package bash-4.4.12-13.fc27.riscv64 is already installed, skipping. Package gawk-4.2.0-2.fc27.riscv64 is already installed, skipping. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Package gnupg2-2.2.4-1.fc27.riscv64 is already installed, skipping. Package pcre-8.41-4.fc27.riscv64 is already installed, skipping. Package sed-4.4-4.fc28.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: acl riscv64 2.2.52-18.fc28 local 116 k bash-completion noarch 1:2.7-3.fc28 local 272 k expat-devel riscv64 2.2.5-1.fc27 local 54 k gettext riscv64 0.19.8.1-14.fc28 local 812 k gnupg riscv64 1.4.22-3.fc27 local 2.8 M libcurl-devel riscv64 7.58.0-6.fc27 local 783 k make riscv64 1:4.2.1-6.fc27 local 486 k openssl-devel riscv64 1:1.1.0g-2.fc28 local 1.9 M pcre2-devel riscv64 10.31-0.3.RC1.fc28.1 local 587 k perl-CGI noarch 4.37-1.fc27 local 206 k perl-Digest-MD5 riscv64 2.55-408.fc27.0.riscv64 local 117 k perl-Error noarch 1:0.17025-1.fc27 local 44 k perl-ExtUtils-MakeMaker noarch 1:7.30-2.fc27 local 296 k perl-HTTP-Date noarch 6.02-17.fc27 local 17 k perl-IO-Tty riscv64 1.12-10.fc28 local 77 k perl-MailTools noarch 2.19-1.fc27 local 110 k perl-Memoize noarch 1.03-408.fc28.1.riscv64 local 115 k perl-Test noarch 1.30-408.fc28.1.riscv64 local 86 k perl-Test-Harness noarch 1:3.39-4.fc27 local 276 k perl-Test-Simple noarch 1:1.302103-1.fc27 local 485 k perl-Time-HiRes riscv64 1.9753-1.fc28 local 93 k perl-generators noarch 1.10-6.fc27 local 16 k python2-devel riscv64 2.7.14-9.fc28 local 410 k python3-devel riscv64 3.6.4-14.0.fc28 local 862 k tcl riscv64 1:8.6.7-2.fc28 local 2.8 M time riscv64 1.8-3.0.riscv64.fc28 local 48 k zlib-devel riscv64 1.2.11-4.fc28 local 56 k Installing dependencies: dwz riscv64 0.12-5.fc28 local 108 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k gettext-libs riscv64 0.19.8.1-14.fc28 local 905 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k libcroco riscv64 0.6.12-4.fc28 local 314 k libpkgconf riscv64 1.4.1-1.fc27 local 74 k mailcap noarch 2.1.48-2.fc27 local 37 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k openssl riscv64 1:1.1.0g-2.fc28 local 572 k pcre2-utf16 riscv64 10.31-0.3.RC1.fc28.1 local 296 k pcre2-utf32 riscv64 10.31-0.3.RC1.fc28.1 local 290 k perl-CPAN-Meta-YAML noarch 0.018-408.fc27.0.riscv64 local 77 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Compress-Raw-Bzip2 riscv64 2.074-408.fc27.0.riscv64 local 122 k perl-Compress-Raw-Zlib riscv64 2.076-1.fc28 local 124 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Digest noarch 1.17-408.fc27.0.riscv64 local 82 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Encode-Locale noarch 1.05-8.fc27 local 20 k perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-ExtUtils-Command noarch 1:7.30-2.fc27 local 17 k perl-ExtUtils-Install noarch 2.14-3.fc27 local 45 k perl-ExtUtils-Manifest noarch 1.70-408.fc27.0.riscv64 local 80 k perl-ExtUtils-ParseXS noarch 1:3.35-1.fc27 local 81 k perl-Fedora-VSP noarch 0.001-8.fc27 local 23 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTML-Parser riscv64 3.72-10.fc28.0.riscv64 local 165 k perl-HTML-Tagset noarch 3.20-31.fc27 local 22 k perl-HTTP-Message noarch 6.14-1.fc27 local 95 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-IO-Compress noarch 2.074-408.fc27.0.riscv64 local 298 k perl-IO-HTML noarch 1.001-9.fc27 local 26 k perl-IO-Socket-IP noarch 0.39-4.fc27 local 45 k perl-IO-Socket-SSL noarch 2.051-1.fc27 local 271 k perl-JSON-PP noarch 1:2.94-4.fc27 local 65 k perl-LWP-MediaTypes noarch 6.02-13.fc27 local 27 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-Math-BigInt noarch 1:1.9998.11-4.fc27 local 194 k perl-Math-Complex noarch 1.59-408.fc28.1.riscv64 local 105 k perl-Net-SMTP-SSL noarch 1.04-4.fc27 local 13 k perl-Net-SSLeay riscv64 1.81-4.fc28 local 586 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-TimeDate noarch 1:2.30-12.fc27 local 51 k perl-URI noarch 1.72-1.fc27 local 114 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-devel riscv64 4:5.26.1-408.fc28.1.riscv64 local 593 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libnet noarch 3.11-1.fc27 local 119 k perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k perl-version riscv64 6:0.99.18-5.fc28 local 99 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k python-rpm-macros noarch 3-26.fc28 local 11 k python-srpm-macros noarch 3-26.fc28 local 10 k python2 riscv64 2.7.14-9.fc28 local 107 k python2-libs riscv64 2.7.14-9.fc28 local 8.1 M python2-rpm-macros noarch 3-26.fc28 local 10 k python3-rpm-generators noarch 5-1.fc28 local 23 k python3-rpm-macros noarch 3-26.fc28 local 10 k python3-setuptools noarch 38.4.0-3.fc28 local 620 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k unzip riscv64 6.0-36.fc28 local 398 k zip riscv64 3.0-20.fc28 local 271 k Installing weak dependencies: perl-CPAN-Meta noarch 2.150010-408.fc27.0.riscv64 local 189 k perl-CPAN-Meta-Requiserial8250: too much work for irq11 rements noarch 2.140-408.fc27.0.riscv64 local 79 k Transaction Summary ================================================================================ Install 123 Packages Total download size: 44 M Installed size: 148 M Downloading Packages: (1/123): gettext-0.1 0% [ ] --- B/s | 0 B --:-- ETA (1/123): perl-CGI-4.37-1.fc27.noarch.rpm 854 kB/s | 206 kB 00:00 (2-3/123): gnupg-1.4 1% [ ] 2.3 MB/s | 638 kB 00:19 ETA (2/123): perl-Error-0.17025-1.fc27.noarch.rpm 617 kB/s | 44 kB 00:00 (3-4/123): gnupg-1.4 1% [ ] 2.3 MB/s | 810 kB 00:19 ETA (3/123): perl-HTTP-Date-6.02-17.fc27.noarch.rpm 330 kB/s | 17 kB 00:00 (4-5/123): gnupg-1.4 2% [ ] 2.2 MB/s | 923 kB 00:19 ETA (4/123): perl-IO-Tty-1.12-10.fc28.riscv64.rpm 741 kB/s | 77 kB 00:00 (5-6/123): gnupg-1.4 2% [- ] 2.2 MB/s | 1.2 MB 00:19 ETA (5/123): perl-MailTools-2.19-1.fc27.noarch.rpm 791 kB/s | 110 kB 00:00 (6-7/123): gnupg-1.4 3% [- ] 2.2 MB/s | 1.5 MB 00:19 ETA (6/123): perl-generators-1.10-6.fc27.noarch.rpm 403 kB/s | 16 kB 00:00 (7-8/123): gnupg-1.4 3% [- ] 2.2 MB/s | 1.6 MB 00:19 ETA (7/123): time-1.8-3.0.riscv64.fc28.riscv64.rpm 675 kB/s | 48 kB 00:00 (8-9/123): gnupg-1.4 3% [- ] 2.2 MB/s | 1.8 MB 00:19 ETA (8/123): gettext-0.19.8.1-14.fc28.riscv64.rpm 688 kB/s | 812 kB 00:01 (9-10/123): gnupg-1. 5% [= ] 2.2 MB/s | 2.2 MB 00:19 ETA (9-11/123): gettext- 6% [= ] 2.2 MB/s | 3.1 MB 00:18 ETA (9-11/123): gettext- 9% [=- ] 2.3 MB/s | 4.0 MB 00:17 ETA (9/123): gettext-libs-0.19.8.1-14.fc28.riscv64. 938 kB/s | 905 kB 00:00 (10-11/123): openssl 11% [== ] 2.3 MB/s | 4.9 MB 00:17 ETA (10/123): perl-HTML-Parser-3.72-10.fc28.0.riscv 854 kB/s | 165 kB 00:00 (11-12/123): openssl 12% [== ] 2.3 MB/s | 5.4 MB 00:17 ETA (11/123): perl-TimeDate-2.30-12.fc27.noarch.rpm 546 kB/s | 51 kB 00:00 (12-13/123): openssl 12% [==- ] 2.3 MB/s | 5.6 MB 00:17 ETA (12/123): perl-Net-SMTP-SSL-1.04-4.fc27.noarch. 135 kB/s | 13 kB 00:00 (13-14/123): openssl 13% [==- ] 2.3 MB/s | 5.9 MB 00:17 ETA (13/123): perl-Fedora-VSP-0.001-8.fc27.noarch.r 563 kB/s | 23 kB 00:00 (14-15/123): openssl 13% [==- ] 2.2 MB/s | 6.0 MB 00:17 ETA (14/123): perl-HTML-Tagset-3.20-31.fc27.noarch. 410 kB/s | 22 kB 00:00 (15-16/123): openssl 13% [==- ] 2.2 MB/s | 6.1 MB 00:17 ETA (15/123): perl-HTTP-Message-6.14-1.fc27.noarch. 700 kB/s | 95 kB 00:00 (16-17/123): openssl 14% [==- ] 2.2 MB/s | 6.4 MB 00:17 ETA (16/123): perl-URI-1.72-1.fc27.noarch.rpm 745 kB/s | 114 kB 00:00 (17-18/123): gnupg-1 15% [=== ] 2.2 MB/s | 6.8 MB 00:16 ETA (17/123): openssl-devel-1.1.0g-2.fc28.riscv64.r 757 kB/s | 1.9 MB 00:02 (18-19/123): gnupg-1 16% [=== ] 2.1 MB/s | 7.3 MB 00:17 ETA (18/123): perl-Encode-Locale-1.05-8.fc27.noarch 380 kB/s | 20 kB 00:00 (19-20/123): gnupg-1 16% [=== ] 2.1 MB/s | 7.4 MB 00:17 ETA (19/123): perl-IO-Socket-SSL-2.051-1.fc27.noarc 449 kB/s | 271 kB 00:00 (20-21/123): gnupg-1 17% [=== ] 2.1 MB/s | 7.6 MB 00:17 ETA (20/123): perl-IO-HTML-1.001-9.fc27.noarch.rpm 232 kB/s | 26 kB 00:00 (21/123): gnupg-1.4. 17% [=== ] 2.1 MB/s | 7.6 MB 00:17 ETA (21/123): perl-LWP-MediaTypes-6.02-13.fc27.noar 351 kB/s | 27 kB 00:00 (22-23/123): gnupg-1 17% [=== ] 2.1 MB/s | 7.7 MB 00:17 ETA (22/123): gnupg-1.4.22-3.fc27.riscv64.rpm 668 kB/s | 2.8 MB 00:04 (23-24/123): mailcap 17% [=== ] 1.9 MB/s | 7.8 MB 00:18 ETA (23/123): mailcap-2.1.48-2.fc27.noarch.rpm 87 kB/s | 37 kB 00:00 (24-25/123): acl-2.2 17% [===- ] 1.9 MB/s | 7.8 MB 00:19 ETA (24/123): expat-devel-2.2.5-1.fc27.riscv64.rpm 734 kB/s | 54 kB 00:00 (25-26/123): acl-2.2 18% [===- ] 1.9 MB/s | 8.0 MB 00:18 ETA (25/123): acl-2.2.52-18.fc28.riscv64.rpm 468 kB/s | 116 kB 00:00 (26-27/123): libcurl 18% [===- ] 1.9 MB/s | 8.1 MB 00:19 ETA (26-28/123): make-4. 20% [==== ] 2.0 MB/s | 9.0 MB 00:18 ETA (26/123): perl-Net-SSLeay-1.81-4.fc28.riscv64.r 496 kB/s | 586 kB 00:01 (27-28/123): make-4. 20% [==== ] 2.0 MB/s | 9.3 MB 00:18 ETA (27/123): make-4.2.1-6.fc27.riscv64.rpm 765 kB/s | 486 kB 00:00 (28-29/123): libcurl 21% [==== ] 1.9 MB/s | 9.6 MB 00:17 ETA (28/123): libcurl-devel-7.58.0-6.fc27.riscv64.r 728 kB/s | 783 kB 00:01 (29-30/123): pcre2-d 23% [====- ] 1.9 MB/s | 10 MB 00:17 ETA (29/123): pcre2-utf16-10.31-0.3.RC1.fc28.1.risc 671 kB/s | 296 kB 00:00 (30-31/123): pcre2-d 23% [====- ] 1.9 MB/s | 10 MB 00:17 ETA (30/123): pcre2-devel-10.31-0.3.RC1.fc28.1.risc 661 kB/s | 587 kB 00:00 (31-32/123): pcre2-u 24% [====- ] 1.9 MB/s | 11 MB 00:17 ETA (31/123): pcre2-utf32-10.31-0.3.RC1.fc28.1.risc 611 kB/s | 290 kB 00:00 (32-33/123): perl-Di 24% [====- ] 1.9 MB/s | 11 MB 00:17 ETA (32/123): perl-Test-Harness-3.39-4.fc27.noarch. 573 kB/s | 276 kB 00:00 (33-34/123): perl-Ex 25% [===== ] 1.9 MB/s | 11 MB 00:17 ETA (33/123): perl-Digest-MD5-2.55-408.fc27.0.riscv 447 kB/s | 117 kB 00:00 (34/123): perl-ExtUt 25% [===== ] 1.9 MB/s | 11 MB 00:17 ETA (34/123): perl-Test-1.30-408.fc28.1.riscv64.noa 753 kB/s | 86 kB 00:00 (35-36/123): perl-Me 26% [===== ] 1.9 MB/s | 12 MB 00:17 ETA (35/123): perl-Memoize-1.03-408.fc28.1.riscv64. 587 kB/s | 115 kB 00:00 (36-37/123): perl-Te 26% [===== ] 1.9 MB/s | 12 MB 00:17 ETA (36/123): perl-ExtUtils-MakeMaker-7.30-2.fc27.n 567 kB/s | 296 kB 00:00 (37-38/123): perl-Ti 26% [===== ] 1.9 MB/s | 12 MB 00:17 ETA (37/123): perl-Time-HiRes-1.9753-1.fc28.riscv64 242 kB/s | 93 kB 00:00 (38-39/123): bash-co 26% [===== ] 1.8 MB/s | 12 MB 00:18 ETA (38/123): bash-completion-2.7-3.fc28.noarch.rpm 745 kB/s | 272 kB 00:00 (39-40/123): perl-Te 28% [=====- ] 1.8 MB/s | 13 MB 00:17 ETA (39/123): perl-Test-Simple-1.302103-1.fc27.noar 504 kB/s | 485 kB 00:00 (40-41/123): python2 29% [=====- ] 1.8 MB/s | 13 MB 00:17 ETA (40/123): python2-2.7.14-9.fc28.riscv64.rpm 570 kB/s | 107 kB 00:00 (41/123): python2-de 29% [=====- ] 1.8 MB/s | 13 MB 00:17 ETA (41/123): python2-devel-2.7.14-9.fc28.riscv64.r 632 kB/s | 410 kB 00:00 (42-43/123): python2 29% [=====- ] 1.8 MB/s | 13 MB 00:17 ETA (42-44/123): tcl-8.6 31% [====== ] 1.9 MB/s | 14 MB 00:16 ETA (42-44/123): python2 33% [======- ] 1.9 MB/s | 15 MB 00:15 ETA (42/123): python3-devel-3.6.4-14.0.fc28.riscv64 856 kB/s | 862 kB 00:01 (43-44/123): tcl-8.6 34% [======- ] 1.9 MB/s | 16 MB 00:14 ETA (43/123): zlib-devel-1.2.11-4.fc28.riscv64.rpm 731 kB/s | 56 kB 00:00 (44-45/123): tcl-8.6 35% [======= ] 1.9 MB/s | 16 MB 00:14 ETA (44-46/123): python2 37% [======= ] 2.0 MB/s | 17 MB 00:14 ETA (44/123): openssl-1.1.0g-2.fc28.riscv64.rpm 926 kB/s | 572 kB 00:00 (45-46/123): python2 39% [=======- ] 2.0 MB/s | 17 MB 00:13 ETA (45/123): pkgconf-pkg-config-1.4.1-1.fc27.riscv 508 kB/s | 14 kB 00:00 (46-47/123): python2 39% [=======- ] 2.0 MB/s | 17 MB 00:13 ETA (46/123): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 582 kB/s | 15 kB 00:00 (47-48/123): python2 39% [=======- ] 2.0 MB/s | 17 MB 00:13 ETA (47/123): pkgconf-1.4.1-1.fc27.riscv64.rpm 612 kB/s | 35 kB 00:00 (48-49/123): python2 39% [=======- ] 2.0 MB/s | 18 MB 00:13 ETA (48/123): libpkgconf-1.4.1-1.fc27.riscv64.rpm 756 kB/s | 74 kB 00:00 (49-50/123): python2 40% [======== ] 2.0 MB/s | 18 MB 00:13 ETA (49/123): python-rpm-macros-3-26.fc28.noarch.rp 419 kB/s | 11 kB 00:00 (50-51/123): python2 40% [======== ] 2.0 MB/s | 18 MB 00:13 ETA (50/123): python3-rpm-generators-5-1.fc28.noarc 550 kB/s | 23 kB 00:00 (51-52/123): python2 40% [======== ] 2.0 MB/s | 18 MB 00:13 ETA (51-53/123): tcl-8.6 42% [======== ] 2.0 MB/s | 19 MB 00:12 ETA (51-53/123): python3 44% [========- ] 2.1 MB/s | 20 MB 00:11 ETA (51/123): python3-setuptools-38.4.0-3.fc28.noar 904 kB/s | 620 kB 00:00 (52-53/123): tcl-8.6 44% [========- ] 2.0 MB/s | 20 MB 00:12 ETA (52/123): python3-rpm-macros-3-26.fc28.noarch.r 384 kB/s | 10 kB 00:00 (53-54/123): tcl-8.6 44% [========- ] 2.0 MB/s | 20 MB 00:12 ETA (53/123): redhat-rpm-config-96-1.fc28.0.riscv64 816 kB/s | 75 kB 00:00 (54-55/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (54/123): nim-srpm-macros-1-1.fc28.noarch.rpm 287 kB/s | 7.6 kB 00:00 (55-56/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (55/123): ocaml-srpm-macros-5-2.fc27.noarch.rpm 313 kB/s | 7.8 kB 00:00 (56-57/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (56/123): openblas-srpm-macros-2-2.fc27.noarch. 269 kB/s | 6.6 kB 00:00 (57-58/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (57/123): qt5-srpm-macros-5.10.0-1.fc28.noarch. 284 kB/s | 9.0 kB 00:00 (58-59/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (58/123): rust-srpm-macros-5-1.fc28.noarch.rpm 313 kB/s | 8.0 kB 00:00 (59-60/123): tcl-8.6 45% [========= ] 2.0 MB/s | 20 MB 00:12 ETA (59/123): file-5.32-3.fc28.riscv64.rpm 747 kB/s | 81 kB 00:00 (60-61/123): tcl-8.6 46% [========= ] 2.0 MB/s | 21 MB 00:12 ETA (60/123): python2-rpm-macros-3-26.fc28.noarch.r 377 kB/s | 10 kB 00:00 (61-62/123): tcl-8.6 46% [========= ] 2.0 MB/s | 21 MB 00:12 ETA (61/123): perl-Carp-1.42-408.fc27.0.riscv64.noa 771 kB/s | 84 kB 00:00 (62-63/123): python2 46% [========= ] 2.0 MB/s | 21 MB 00:12 ETA (62/123): perl-Exporter-5.72-408.fc27.0.riscv64 775 kB/s | 87 kB 00:00 (63-64/123): python2 47% [========= ] 2.0 MB/s | 21 MB 00:11 ETA (63/123): perl-constant-1.33-408.fc27.0.riscv64 764 kB/s | 79 kB 00:00 (64-65/123): python2 47% [=========- ] 2.0 MB/s | 21 MB 00:11 ETA (64/123): tcl-8.6.7-2.fc28.riscv64.rpm 686 kB/s | 2.8 MB 00:04 (65-66/123): python2 48% [=========- ] 1.8 MB/s | 21 MB 00:12 ETA (65/123): perl-parent-0.236-408.fc27.0.riscv64. 796 kB/s | 71 kB 00:00 (66-67/123): python2 48% [=========- ] 1.8 MB/s | 22 MB 00:12 ETA (66/123): perl-libnet-3.11-1.fc27.noarch.rpm 208 kB/s | 119 kB 00:00 (67-68/123): python2 48% [=========- ] 1.8 MB/s | 22 MB 00:12 ETA (67/123): perl-Data-Dumper-2.167-408.fc27.0.ris 669 kB/s | 149 kB 00:00 (68-69/123): perl-En 49% [=========- ] 1.8 MB/s | 22 MB 00:12 ETA (68/123): perl-MIME-Base64-3.15-408.fc27.0.risc 871 kB/s | 111 kB 00:00 (69-70/123): perl-En 50% [========== ] 1.8 MB/s | 22 MB 00:12 ETA (69/123): perl-PathTools-3.67-408.fc27.0.riscv6 888 kB/s | 166 kB 00:00 (70-71/123): perl-En 51% [========== ] 1.8 MB/s | 23 MB 00:11 ETA (70/123): perl-Scalar-List-Utils-1.48-1.fc27.ri 846 kB/s | 119 kB 00:00 (71-72/123): perl-En 52% [========== ] 1.9 MB/s | 23 MB 00:11 ETA (71-73/123): perl-En 54% [==========- ] 1.9 MB/s | 24 MB 00:10 ETA (71-73/123): perl-in 56% [=========== ] 2.0 MB/s | 25 MB 00:09 ETA (71-73/123): perl-in 58% [===========- ] 2.1 MB/s | 26 MB 00:08 ETA (71/123): perl-Encode-2.94-16.fc27.riscv64.rpm 840 kB/s | 1.4 MB 00:01 (72-73/123): python2 58% [===========- ] 2.0 MB/s | 26 MB 00:09 ETA (72-74/123): perl-li 60% [============ ] 2.0 MB/s | 27 MB 00:08 ETA (72-74/123): python2 62% [============- ] 2.1 MB/s | 28 MB 00:07 ETA (72-74/123): python2 64% [============- ] 2.2 MB/s | 29 MB 00:07 ETA (72-74/123): python2 66% [============= ] 2.2 MB/s | 30 MB 00:06 ETA (72-74/123): perl-in 68% [=============- ] 2.3 MB/s | 31 MB 00:06 ETA (72-74/123): perl-in 70% [============== ] 2.3 MB/s | 31 MB 00:05 ETA (72-74/123): perl-in 72% [==============- ] 2.3 MB/s | 32 MB 00:05 ETA (72-74/123): perl-li 74% [==============- ] 2.4 MB/s | 33 MB 00:04 ETA (72-74/123): perl-li 76% [=============== ] 2.4 MB/s | 34 MB 00:04 ETA (72-74/123): perl-li 78% [===============- ] 2.5 MB/s | 35 MB 00:03 ETA (72/123): perl-libs-5.26.1-408.fc28.1.riscv64.r 924 kB/s | 3.3 MB 00:03 (73-74/123): python2 80% [================ ] 2.3 MB/s | 36 MB 00:03 ETA (73-75/123): python2 82% [================- ] 2.3 MB/s | 37 MB 00:03 ETA (73/123): python2-libs-2.7.14-9.fc28.riscv64.rp 738 kB/s | 8.1 MB 00:11 (74-75/123): perl-de 83% [================- ] 1.9 MB/s | 37 MB 00:03 ETA (74/123): perl-Errno-1.28-408.fc28.1.riscv64.ri 829 kB/s | 73 kB 00:00 (75-76/123): perl-de 83% [================- ] 1.9 MB/s | 37 MB 00:03 ETA (75/123): perl-Time-Local-1.250-394.fc27.noarch 721 kB/s | 30 kB 00:00 (76-77/123): perl-de 84% [================- ] 1.9 MB/s | 37 MB 00:03 ETA (76/123): perl-devel-5.26.1-408.fc28.1.riscv64. 362 kB/s | 593 kB 00:01 (77-78/123): perl-in 84% [================- ] 1.9 MB/s | 38 MB 00:03 ETA (77/123): perl-File-Temp-0.230.400-408.fc27.0.r 486 kB/s | 103 kB 00:00 (78/123): perl-inter 84% [================- ] 1.9 MB/s | 38 MB 00:03 ETA (78/123): perl-Term-ANSIColor-4.06-408.fc27.0.r 741 kB/s | 94 kB 00:00 (79-80/123): perl-in 85% [================= ] 1.9 MB/s | 38 MB 00:03 ETA (79/123): perl-IO-1.38-408.fc28.1.riscv64.riscv 704 kB/s | 176 kB 00:00 (80-81/123): perl-in 86% [================= ] 1.9 MB/s | 38 MB 00:03 ETA (80/123): perl-threads-shared-1.58-1.fc27.riscv 874 kB/s | 91 kB 00:00 (81-82/123): perl-in 86% [================= ] 1.9 MB/s | 39 MB 00:03 ETA (81/123): perl-Storable-2.62-408.fc27.0.riscv64 636 kB/s | 205 kB 00:00 (82-83/123): perl-in 86% [================= ] 1.9 MB/s | 39 MB 00:03 ETA (82/123): perl-File-Path-2.15-1.fc27.noarch.rpm 312 kB/s | 37 kB 00:00 (83-84/123): perl-in 86% [================= ] 1.9 MB/s | 39 MB 00:03 ETA (83/123): perl-Getopt-Long-2.50-3.fc27.noarch.r 523 kB/s | 61 kB 00:00 (84-85/123): perl-in 87% [================= ] 1.9 MB/s | 39 MB 00:03 ETA (84/123): perl-Text-ParseWords-3.30-408.fc27.0. 547 kB/s | 73 kB 00:00 (85-86/123): perl-in 87% [================= ] 1.9 MB/s | 39 MB 00:02 ETA (85/123): perl-Socket-2.027-1.fc27.riscv64.rpm 617 kB/s | 95 kB 00:00 (86-87/123): perl-in 87% [=================- ] 1.9 MB/s | 39 MB 00:02 ETA (86/123): perl-Digest-1.17-408.fc27.0.riscv64.n 521 kB/s | 82 kB 00:00 (87-88/123): perl-in 88% [=================- ] 1.9 MB/s | 39 MB 00:02 ETA (87/123): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 314 kB/s | 7.5 kB 00:00 (88-89/123): perl-in 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (88/123): ghc-srpm-macros-1.4.2-7.fc28.noarch.r 336 kB/s | 8.2 kB 00:00 (89-90/123): libcroc 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (89/123): gnat-srpm-macros-4-5.fc28.noarch.rpm 353 kB/s | 8.8 kB 00:00 (90-91/123): libcroc 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (90/123): go-srpm-macros-2-11.fc28.noarch.rpm 334 kB/s | 8.4 kB 00:00 (91-92/123): libcroc 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (91/123): perl-srpm-macros-1-26.fc28.noarch.rpm 393 kB/s | 9.7 kB 00:00 (92-93/123): libcroc 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (92/123): python-srpm-macros-3-26.fc28.noarch.r 399 kB/s | 10 kB 00:00 (93-94/123): libcroc 88% [=================- ] 1.8 MB/s | 39 MB 00:02 ETA (93/123): dwz-0.12-5.fc28.riscv64.rpm 820 kB/s | 108 kB 00:00 (94-95/123): libcroc 89% [=================- ] 1.8 MB/s | 40 MB 00:02 ETA (94/123): libcroco-0.6.12-4.fc28.riscv64.rpm 475 kB/s | 314 kB 00:00 (95-96/123): zip-3.0 89% [=================- ] 1.8 MB/s | 40 MB 00:02 ETA (95/123): perl-IO-Socket-IP-0.39-4.fc27.noarch. 746 kB/s | 45 kB 00:00 (96-97/123): zip-3.0 90% [================== ] 1.8 MB/s | 40 MB 00:02 ETA (96/123): perl-macros-5.26.1-408.fc28.1.riscv64 761 kB/s | 69 kB 00:00 (97-98/123): zip-3.0 90% [================== ] 1.8 MB/s | 40 MB 00:02 ETA (97/123): zip-3.0-20.fc28.riscv64.rpm 596 kB/s | 271 kB 00:00 (98-99/123): perl-HT 91% [================== ] 1.8 MB/s | 41 MB 00:02 ETA (98/123): perl-HTTP-Tiny-0.070-408.fc27.0.riscv 486 kB/s | 97 kB 00:00 (99-100/123): perl-I 91% [================== ] 1.8 MB/s | 41 MB 00:02 ETA (99/123): perl-Compress-Raw-Zlib-2.076-1.fc28.r 732 kB/s | 124 kB 00:00 (100-101/123): perl- 92% [================== ] 1.8 MB/s | 41 MB 00:01 ETA (100/123): perl-Pod-Usage-1.69-408.fc27.0.riscv 834 kB/s | 89 kB 00:00 (101-102/123): perl- 92% [==================- ] 1.8 MB/s | 41 MB 00:01 ETA (101/123): perl-IO-Compress-2.074-408.fc27.0.ri 634 kB/s | 298 kB 00:00 (102-103/123): perl- 92% [==================- ] 1.8 MB/s | 41 MB 00:01 ETA (102/123): perl-ExtUtils-Command-7.30-2.fc27.no 158 kB/s | 17 kB 00:00 (103-104/123): perl- 93% [==================- ] 1.8 MB/s | 41 MB 00:01 ETA (103/123): perl-ExtUtils-Install-2.14-3.fc27.no 460 kB/s | 45 kB 00:00 (104-105/123): perl- 93% [==================- ] 1.8 MB/s | 41 MB 00:01 ETA (104/123): perl-ExtUtils-Manifest-1.70-408.fc27 534 kB/s | 80 kB 00:00 (105-106/123): perl- 93% [==================- ] 1.8 MB/s | 42 MB 00:01 ETA (105/123): perl-ExtUtils-ParseXS-3.35-1.fc27.no 500 kB/s | 81 kB 00:00 (106-107/123): perl- 93% [==================- ] 1.7 MB/s | 42 MB 00:01 ETA (106-108/123): perl- 94% [==================- ] 1.7 MB/s | 42 MB 00:01 ETA (106/123): perl-podlators-4.09-408.fc27.0.riscv 338 kB/s | 157 kB 00:00 (107-108/123): perl- 94% [==================- ] 1.7 MB/s | 42 MB 00:01 ETA (107/123): perl-version-0.99.18-5.fc28.riscv64. 483 kB/s | 99 kB 00:00 (108-109/123): unzip 94% [==================- ] 1.7 MB/s | 42 MB 00:01 ETA (108/123): perl-threads-2.21-1.fc27.riscv64.rpm 841 kB/s | 104 kB 00:00 (109-110/123): unzip 95% [=================== ] 1.7 MB/s | 42 MB 00:01 ETA (109/123): perl-Text-Tabs+Wrap-2013.0523-408.fc 810 kB/s | 80 kB 00:00 (110-111/123): unzip 95% [=================== ] 1.7 MB/s | 43 MB 00:01 ETA (110/123): perl-interpreter-5.26.1-408.fc28.1.r 639 kB/s | 6.7 MB 00:10 (111-112/123): unzip 96% [=================== ] 1.4 MB/s | 43 MB 00:01 ETA (111/123): perl-Unicode-Normalize-1.25-408.fc27 168 kB/s | 164 kB 00:00 (112-113/123): unzip 97% [=================== ] 1.4 MB/s | 43 MB 00:00 ETA (112/123): unzip-6.0-36.fc28.riscv64.rpm 282 kB/s | 398 kB 00:01 (113-114/123): perl- 97% [=================== ] 1.4 MB/s | 43 MB 00:00 ETA (113/123): perl-Term-Cap-1.17-408.fc27.0.riscv6 447 kB/s | 78 kB 00:00 (114-115/123): perl- 97% [===================-] 1.4 MB/s | 43 MB 00:00 ETA (114/123): perl-Pod-Perldoc-3.28-408.fc27.0.ris 695 kB/s | 139 kB 00:00 (115-116/123): perl- 98% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (115/123): perl-Pod-Escapes-1.07-408.fc27.0.ris 641 kB/s | 77 kB 00:00 (116/123): perl-Pod- 98% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (116/123): perl-Pod-Simple-3.35-408.fc27.0.risc 486 kB/s | 271 kB 00:00 (117-118/123): perl- 98% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (117/123): perl-Compress-Raw-Bzip2-2.074-408.fc 516 kB/s | 122 kB 00:00 (118-119/123): perl- 98% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (118/123): perl-CPAN-Meta-Requirements-2.140-40 630 kB/s | 79 kB 00:00 (119/123): perl-CPAN 98% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (119/123): perl-CPAN-Meta-2.150010-408.fc27.0.r 500 kB/s | 189 kB 00:00 (120-121/123): perl- 99% [===================-] 1.4 MB/s | 44 MB 00:00 ETA random: crng init done (120/123): perl-CPAN-Meta-YAML-0.018-408.fc27.0 431 kB/s | 77 kB 00:00 (121-122/123): perl- 99% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (121/123): perl-JSON-PP-2.94-4.fc27.noarch.rpm 305 kB/s | 65 kB 00:00 (122-123/123): perl- 99% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (122/123): perl-Math-Complex-1.59-408.fc28.1.ri 923 kB/s | 105 kB 00:00 (123/123): perl-Math 99% [===================-] 1.4 MB/s | 44 MB 00:00 ETA (123/123): perl-Math-BigInt-1.9998.11-4.fc27.no 772 kB/s | 194 kB 00:00 -------------------------------------------------------------------------------- Total 1.7 MB/s | 44 MB 00:25 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : [================================================== ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408. [ ] 1/123 Installing : perl-Exporter-5.72-408. [===== ] 1/123 Installing : perl-Exporter-5.72-408. [====== ] 1/123 Installing : perl-Exporter-5.72-408. [=================== ] 1/123 Installing : perl-Exporter-5.72-408. [======================= ] 1/123 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/123 Installing : perl-libs-4:5.26.1-408. [ ] 2/123 Installing : perl-libs-4:5.26.1-408. [= ] 2/123 Installing : perl-libs-4:5.26.1-408. [== ] 2/123 Installing : perl-libs-4:5.26.1-408. [=== ] 2/123 Installing : perl-libs-4:5.26.1-408. [==== ] 2/123 Installing : perl-libs-4:5.26.1-408. [===== ] 2/123 Installing : perl-libs-4:5.26.1-408. [====== ] 2/123 Installing : perl-libs-4:5.26.1-408. [======= ] 2/123 Installing : perl-libs-4:5.26.1-408. [======== ] 2/123 Installing : perl-libs-4:5.26.1-408. [========= ] 2/123 Installing : perl-libs-4:5.26.1-408. [========== ] 2/123 Installing : perl-libs-4:5.26.1-408. [=========== ] 2/123 Installing : perl-libs-4:5.26.1-408. [============ ] 2/123 Installing : perl-libs-4:5.26.1-408. [============= ] 2/123 Installing : perl-libs-4:5.26.1-408. [============== ] 2/123 Installing : perl-libs-4:5.26.1-408. [=============== ] 2/123 Installing : perl-libs-4:5.26.1-408. [================ ] 2/123 Installing : perl-libs-4:5.26.1-408. [================= ] 2/123 Installing : perl-libs-4:5.26.1-408. [================== ] 2/123 Installing : perl-libs-4:5.26.1-408. [=================== ] 2/123 Installing : perl-libs-4:5.26.1-408. [==================== ] 2/123 Installing : perl-libs-4:5.26.1-408. [===================== ] 2/123 Installing : perl-libs-4:5.26.1-408. [====================== ] 2/123 Installing : perl-libs-4:5.26.1-408. [======================= ] 2/123 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/123 Installing : perl-Carp-1.42-408.fc27 [ ] 3/123 Installing : perl-Carp-1.42-408.fc27 [=== ] 3/123 Installing : perl-Carp-1.42-408.fc27 [==== ] 3/123 Installing : perl-Carp-1.42-408.fc27 [======================= ] 3/123 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/123 Installing : perl-Scalar-List-Utils- [ ] 4/123 Installing : perl-Scalar-List-Utils- [= ] 4/123 Installing : perl-Scalar-List-Utils- [== ] 4/123 Installing : perl-Scalar-List-Utils- [===== ] 4/123 Installing : perl-Scalar-List-Utils- [======= ] 4/123 Installing : perl-Scalar-List-Utils- [========== ] 4/123 Installing : perl-Scalar-List-Utils- [============ ] 4/123 Installing : perl-Scalar-List-Utils- [=============== ] 4/123 Installing : perl-Scalar-List-Utils- [================== ] 4/123 Installing : perl-Scalar-List-Utils- [==================== ] 4/123 Installing : perl-Scalar-List-Utils- [===================== ] 4/123 Installing : perl-Scalar-List-Utils- [====================== ] 4/123 Installing : perl-Scalar-List-Utils- [======================= ] 4/123 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/123 Installing : perl-Text-ParseWords-3. [ ] 5/123 Installing : perl-Text-ParseWords-3. [======= ] 5/123 Installing : perl-Text-ParseWords-3. [======================= ] 5/123 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noa 5/123 Installing : perl-Term-ANSIColor-4.0 [ ] 6/123 Installing : perl-Term-ANSIColor-4.0 [==== ] 6/123 Installing : perl-Term-ANSIColor-4.0 [================= ] 6/123 Installing : perl-Term-ANSIColor-4.0 [======================= ] 6/123 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noar 6/123 Installing : perl-macros-4:5.26.1-40 [ ] 7/123 Installing : perl-macros-4:5.26.1-40 [======================= ] 7/123 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/123 Installing : perl-constant-1.33-408. [ ] 8/123 Installing : perl-constant-1.33-408. [====== ] 8/123 Installing : perl-constant-1.33-408. [======================= ] 8/123 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 8/123 Installing : perl-parent-1:0.236-408 [ ] 9/123 Installing : perl-parent-1:0.236-408 [============ ] 9/123 Installing : perl-parent-1:0.236-408 [======================= ] 9/123 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 9/123 Installing : perl-PathTools-3.67-408 [ ] 10/123 Installing : perl-PathTools-3.67-408 [== ] 10/123 Installing : perl-PathTools-3.67-408 [=== ] 10/123 Installing : perl-PathTools-3.67-408 [==== ] 10/123 Installing : perl-PathTools-3.67-408 [====== ] 10/123 Installing : perl-PathTools-3.67-408 [======= ] 10/123 Installing : perl-PathTools-3.67-408 [========= ] 10/123 Installing : perl-PathTools-3.67-408 [========== ] 10/123 Installing : perl-PathTools-3.67-408 [============= ] 10/123 Installing : perl-PathTools-3.67-408 [================= ] 10/123 Installing : perl-PathTools-3.67-408 [=================== ] 10/123 Installing : perl-PathTools-3.67-408 [==================== ] 10/123 Installing : perl-PathTools-3.67-408 [===================== ] 10/123 Installing : perl-PathTools-3.67-408 [====================== ] 10/123 Installing : perl-PathTools-3.67-408 [======================= ] 10/123 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 10/123 Installing : perl-Errno-1.28-408.fc2 [ ] 11/123 Installing : perl-Errno-1.28-408.fc2 [================ ] 11/123 Installing : perl-Errno-1.28-408.fc2 [======================= ] 11/123 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 11/123 Installing : perl-File-Path-2.15-1.f [ ] 12/123 Installing : perl-File-Path-2.15-1.f [=== ] 12/123 Installing : perl-File-Path-2.15-1.f [==== ] 12/123 Installing : perl-File-Path-2.15-1.f [======= ] 12/123 Installing : perl-File-Path-2.15-1.f [=================== ] 12/123 Installing : perl-File-Path-2.15-1.f [======================= ] 12/123 Installing : perl-File-Path-2.15-1.fc27.noarch 12/123 Installing : perl-IO-1.38-408.fc28.1 [ ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [=== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [==== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [====== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [======= ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [========== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [============= ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [================ ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [=================== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [==================== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [===================== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [====================== ] 13/123 Installing : perl-IO-1.38-408.fc28.1 [======================= ] 13/123 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 13/123 Installing : perl-Socket-4:2.027-1.f [ ] 14/123 Installing : perl-Socket-4:2.027-1.f [=== ] 14/123 Installing : perl-Socket-4:2.027-1.f [====== ] 14/123 Installing : perl-Socket-4:2.027-1.f [========== ] 14/123 Installing : perl-Socket-4:2.027-1.f [============= ] 14/123 Installing : perl-Socket-4:2.027-1.f [================ ] 14/123 Installing : perl-Socket-4:2.027-1.f [=================== ] 14/123 Installing : perl-Socket-4:2.027-1.f [==================== ] 14/123 Installing : perl-Socket-4:2.027-1.f [===================== ] 14/123 Installing : perl-Socket-4:2.027-1.f [====================== ] 14/123 Installing : perl-Socket-4:2.027-1.f [======================= ] 14/123 Installing : perl-Socket-4:2.027-1.fc27.riscv64 14/123 Installing : perl-threads-shared-1.5 [ ] 15/123 Installing : perl-threads-shared-1.5 [=== ] 15/123 Installing : perl-threads-shared-1.5 [====== ] 15/123 Installing : perl-threads-shared-1.5 [========== ] 15/123 Installing : perl-threads-shared-1.5 [============= ] 15/123 Installing : perl-threads-shared-1.5 [================ ] 15/123 Installing : perl-threads-shared-1.5 [=================== ] 15/123 Installing : perl-threads-shared-1.5 [====================== ] 15/123 Installing : perl-threads-shared-1.5 [======================= ] 15/123 Installing : perl-threads-shared-1.58-1.fc27.riscv64 15/123 Installing : perl-threads-1:2.21-1.f [ ] 16/123 Installing : perl-threads-1:2.21-1.f [=== ] 16/123 Installing : perl-threads-1:2.21-1.f [====== ] 16/123 Installing : perl-threads-1:2.21-1.f [========= ] 16/123 Installing : perl-threads-1:2.21-1.f [============ ] 16/123 Installing : perl-threads-1:2.21-1.f [=============== ] 16/123 Installing : perl-threads-1:2.21-1.f [================= ] 16/123 Installing : perl-threads-1:2.21-1.f [==================== ] 16/123 Installing : perl-threads-1:2.21-1.f [===================== ] 16/123 Installing : perl-threads-1:2.21-1.f [====================== ] 16/123 Installing : perl-threads-1:2.21-1.f [======================= ] 16/123 Installing : perl-threads-1:2.21-1.fc27.riscv64 16/123 Installing : perl-Text-Tabs+Wrap-201 [ ] 17/123 Installing : perl-Text-Tabs+Wrap-201 [=== ] 17/123 Installing : perl-Text-Tabs+Wrap-201 [======== ] 17/123 Installing : perl-Text-Tabs+Wrap-201 [============= ] 17/123 Installing : perl-Text-Tabs+Wrap-201 [======================= ] 17/123 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64 17/123 Installing : perl-interpreter-4:5.26 [ ] 18/123 Installing : perl-interpreter-4:5.26 [= ] 18/123 Installing : perl-interpreter-4:5.26 [== ] 18/123 Installing : perl-interpreter-4:5.26 [=== ] 18/123 Installing : perl-interpreter-4:5.26 [==== ] 18/123 Installing : perl-interpreter-4:5.26 [===== ] 18/123 Installing : perl-interpreter-4:5.26 [====== ] 18/123 Installing : perl-interpreter-4:5.26 [======= ] 18/123 Installing : perl-interpreter-4:5.26 [======== ] 18/123 Installing : perl-interpreter-4:5.26 [========= ] 18/123 Installing : perl-interpreter-4:5.26 [========== ] 18/123 Installing : perl-interpreter-4:5.26 [=========== ] 18/123 Installing : perl-interpreter-4:5.26 [============ ] 18/123 Installing : perl-interpreter-4:5.26 [============= ] 18/123 Installing : perl-interpreter-4:5.26 [============== ] 18/123 Installing : perl-interpreter-4:5.26 [=============== ] 18/123 Installing : perl-interpreter-4:5.26 [================ ] 18/123 Installing : perl-interpreter-4:5.26 [================= ] 18/123 Installing : perl-interpreter-4:5.26 [================== ] 18/123 Installing : perl-interpreter-4:5.26 [=================== ] 18/123 Installing : perl-interpreter-4:5.26 [==================== ] 18/123 Installing : perl-interpreter-4:5.26 [===================== ] 18/123 Installing : perl-interpreter-4:5.26 [====================== ] 18/123 Installing : perl-interpreter-4:5.26 [======================= ] 18/123 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.ris 18/123 Installing : perl-Unicode-Normalize- [ ] 19/123 Installing : perl-Unicode-Normalize- [= ] 19/123 Installing : perl-Unicode-Normalize- [== ] 19/123 Installing : perl-Unicode-Normalize- [=== ] 19/123 Installing : perl-Unicode-Normalize- [==== ] 19/123 Installing : perl-Unicode-Normalize- [===== ] 19/123 Installing : perl-Unicode-Normalize- [====== ] 19/123 Installing : perl-Unicode-Normalize- [======= ] 19/123 Installing : perl-Unicode-Normalize- [======== ] 19/123 Installing : perl-Unicode-Normalize- [========= ] 19/123 Installing : perl-Unicode-Normalize- [========== ] 19/123 Installing : perl-Unicode-Normalize- [=========== ] 19/123 Installing : perl-Unicode-Normalize- [============ ] 19/123 Installing : perl-Unicode-Normalize- [============= ] 19/123 Installing : perl-Unicode-Normalize- [============== ] 19/123 Installing : perl-Unicode-Normalize- [=============== ] 19/123 Installing : perl-Unicode-Normalize- [================ ] 19/123 Installing : perl-Unicode-Normalize- [================= ] 19/123 Installing : perl-Unicode-Normalize- [================== ] 19/123 Installing : perl-Unicode-Normalize- [=================== ] 19/123 Installing : perl-Unicode-Normalize- [==================== ] 19/123 Installing : perl-Unicode-Normalize- [===================== ] 19/123 Installing : perl-Unicode-Normalize- [====================== ] 19/123 Installing : perl-Unicode-Normalize- [======================= ] 19/123 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.r 19/123 Installing : perl-MIME-Base64-3.15-4 [ ] 20/123 Installing : perl-MIME-Base64-3.15-4 [= ] 20/123 Installing : perl-MIME-Base64-3.15-4 [== ] 20/123 Installing : perl-MIME-Base64-3.15-4 [========== ] 20/123 Installing : perl-MIME-Base64-3.15-4 [================= ] 20/123 Installing : perl-MIME-Base64-3.15-4 [====================== ] 20/123 Installing : perl-MIME-Base64-3.15-4 [======================= ] 20/123 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 20/123 Installing : perl-File-Temp-0.230.40 [ ] 21/123 Installing : perl-File-Temp-0.230.40 [=== ] 21/123 Installing : perl-File-Temp-0.230.40 [=========== ] 21/123 Installing : perl-File-Temp-0.230.40 [==================== ] 21/123 Installing : perl-File-Temp-0.230.40 [======================= ] 21/123 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noar 21/123 Installing : perl-Data-Dumper-2.167- [ ] 22/123 Installing : perl-Data-Dumper-2.167- [=== ] 22/123 Installing : perl-Data-Dumper-2.167- [==== ] 22/123 Installing : perl-Data-Dumper-2.167- [======== ] 22/123 Installing : perl-Data-Dumper-2.167- [=========== ] 22/123 Installing : perl-Data-Dumper-2.167- [============== ] 22/123 Installing : perl-Data-Dumper-2.167- [================== ] 22/123 Installing : perl-Data-Dumper-2.167- [===================== ] 22/123 Installing : perl-Data-Dumper-2.167- [====================== ] 22/123 Installing : perl-Data-Dumper-2.167- [======================= ] 22/123 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv6 22/123 Installing : perl-Storable-1:2.62-40 [ ] 23/123 Installing : perl-Storable-1:2.62-40 [= ] 23/123 Installing : perl-Storable-1:2.62-40 [== ] 23/123 Installing : perl-Storable-1:2.62-40 [==== ] 23/123 Installing : perl-Storable-1:2.62-40 [====== ] 23/123 Installing : perl-Storable-1:2.62-40 [======== ] 23/123 Installing : perl-Storable-1:2.62-40 [========== ] 23/123 Installing : perl-Storable-1:2.62-40 [============ ] 23/123 Installing : perl-Storable-1:2.62-40 [============= ] 23/123 Installing : perl-Storable-1:2.62-40 [=============== ] 23/123 Installing : perl-Storable-1:2.62-40 [================= ] 23/123 Installing : perl-Storable-1:2.62-40 [=================== ] 23/123 Installing : perl-Storable-1:2.62-40 [===================== ] 23/123 Installing : perl-Storable-1:2.62-40 [======================= ] 23/123 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 23/123 Installing : perl-Time-Local-1:1.250 [ ] 24/123 Installing : perl-Time-Local-1:1.250 [= ] 24/123 Installing : perl-Time-Local-1:1.250 [===== ] 24/123 Installing : perl-Time-Local-1:1.250 [======== ] 24/123 Installing : perl-Time-Local-1:1.250 [================ ] 24/123 Installing : perl-Time-Local-1:1.250 [================== ] 24/123 Installing : perl-Time-Local-1:1.250 [======================= ] 24/123 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 24/123 Installing : perl-TimeDate-1:2.30-12 [ ] 25/123 Installing : perl-TimeDate-1:2.30-12 [== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [=== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [==== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [===== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [======= ] 25/123 Installing : perl-TimeDate-1:2.30-12 [======== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [========= ] 25/123 Installing : perl-TimeDate-1:2.30-12 [========== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [=========== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [============ ] 25/123 Installing : perl-TimeDate-1:2.30-12 [============= ] 25/123 Installing : perl-TimeDate-1:2.30-12 [============== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [=============== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [================ ] 25/123 Installing : perl-TimeDate-1:2.30-12 [================= ] 25/123 Installing : perl-TimeDate-1:2.30-12 [================== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [=================== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [===================== ] 25/123 Installing : perl-TimeDate-1:2.30-12 [======================= ] 25/123 Installing : perl-TimeDate-1:2.30-12.fc27.noarch 25/123 Installing : perl-HTTP-Tiny-0.070-40 [ ] 26/123 Installing : perl-HTTP-Tiny-0.070-40 [== ] 26/123 Installing : perl-HTTP-Tiny-0.070-40 [=========== ] 26/123 Installing : perl-HTTP-Tiny-0.070-40 [==================== ] 26/123 Installing : perl-HTTP-Tiny-0.070-40 [======================= ] 26/123 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 26/123 Installing : perl-IO-Socket-IP-0.39- [ ] 27/123 Installing : perl-IO-Socket-IP-0.39- [== ] 27/123 Installing : perl-IO-Socket-IP-0.39- [====== ] 27/123 Installing : perl-IO-Socket-IP-0.39- [======= ] 27/123 Installing : perl-IO-Socket-IP-0.39- [============ ] 27/123 Installing : perl-IO-Socket-IP-0.39- [============== ] 27/123 Installing : perl-IO-Socket-IP-0.39- [====================== ] 27/123 Installing : perl-IO-Socket-IP-0.39- [======================= ] 27/123 Installing : perl-IO-Socket-IP-0.39-4.fc27.noarch 27/123 Installing : perl-libnet-3.11-1.fc27 [ ] 28/123 Installing : perl-libnet-3.11-1.fc27 [= ] 28/123 Installing : perl-libnet-3.11-1.fc27 [=== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [==== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [===== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [====== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [======= ] 28/123 Installing : perl-libnet-3.11-1.fc27 [======== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [========= ] 28/123 Installing : perl-libnet-3.11-1.fc27 [========== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [============= ] 28/123 Installing : perl-libnet-3.11-1.fc27 [============== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [=============== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [================== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [=================== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [===================== ] 28/123 Installing : perl-libnet-3.11-1.fc27 [======================= ] 28/123 Installing : perl-libnet-3.11-1.fc27.noarch 28/123 Installing : perl-Compress-Raw-Zlib- [ ] 29/123 Installing : perl-Compress-Raw-Zlib- [= ] 29/123 Installing : perl-Compress-Raw-Zlib- [== ] 29/123 Installing : perl-Compress-Raw-Zlib- [===== ] 29/123 Installing : perl-Compress-Raw-Zlib- [======= ] 29/123 Installing : perl-Compress-Raw-Zlib- [========= ] 29/123 Installing : perl-Compress-Raw-Zlib- [=========== ] 29/123 Installing : perl-Compress-Raw-Zlib- [============= ] 29/123 Installing : perl-Compress-Raw-Zlib- [=============== ] 29/123 Installing : perl-Compress-Raw-Zlib- [================= ] 29/123 Installing : perl-Compress-Raw-Zlib- [=================== ] 29/123 Installing : perl-Compress-Raw-Zlib- [===================== ] 29/123 Installing : perl-Compress-Raw-Zlib- [====================== ] 29/123 Installing : perl-Compress-Raw-Zlib- [======================= ] 29/123 Installing : perl-Compress-Raw-Zlib-2.076-1.fc28.riscv64 29/123 Installing : python2-libs-2.7.14-9.f [ ] 30/123 Installing : python2-libs-2.7.14-9.f [= ] 30/123 Installing : python2-libs-2.7.14-9.f [== ] 30/123 Installing : python2-libs-2.7.14-9.f [=== ] 30/123 Installing : python2-libs-2.7.14-9.f [==== ] 30/123 Installing : python2-libs-2.7.14-9.f [===== ] 30/123 Installing : python2-libs-2.7.14-9.f [====== ] 30/123 Installing : python2-libs-2.7.14-9.f [======= ] 30/123 Installing : python2-libs-2.7.14-9.f [======== ] 30/123 Installing : python2-libs-2.7.14-9.f [========= ] 30/123 Installing : python2-libs-2.7.14-9.f [========== ] 30/123 Installing : python2-libs-2.7.14-9.f [=========== ] 30/123 Installing : python2-libs-2.7.14-9.f [============ ] 30/123 Installing : python2-libs-2.7.14-9.f [============= ] 30/123 Installing : python2-libs-2.7.14-9.f [============== ] 30/123 Installing : python2-libs-2.7.14-9.f [=============== ] 30/123 Installing : python2-libs-2.7.14-9.f [================ ] 30/123 Installing : python2-libs-2.7.14-9.f [================= ] 30/123 Installing : python2-libs-2.7.14-9.f [================== ] 30/123 Installing : python2-libs-2.7.14-9.f [=================== ] 30/123 Installing : python2-libs-2.7.14-9.f [==================== ] 30/123 Installing : python2-libs-2.7.14-9.f [===================== ] 30/123 Installing : python2-libs-2.7.14-9.f [====================== ] 30/123 Installing : python2-libs-2.7.14-9.f [======================= ] 30/123 Installing : python2-libs-2.7.14-9.fc28.riscv64 30/123 Running scriptlet: python2-libs-2.7.14-9.fc28.riscv64 30/123 Installing : python2-2.7.14-9.fc28.r [ ] 31/123 Installing : python2-2.7.14-9.fc28.r [===== ] 31/123 Installing : python2-2.7.14-9.fc28.r [====== ] 31/123 Installing : python2-2.7.14-9.fc28.r [============= ] 31/123 Installing : python2-2.7.14-9.fc28.r [=================== ] 31/123 Installing : python2-2.7.14-9.fc28.r [====================== ] 31/123 Installing : python2-2.7.14-9.fc28.r [======================= ] 31/123 Installing : python2-2.7.14-9.fc28.riscv64 31/123 Installing : python-srpm-macros-3-26 [ ] 32/123 Installing : python-srpm-macros-3-26 [====================== ] 32/123 Installing : python-srpm-macros-3-26.fc28.noarch 32/123 Installing : python-rpm-macros-3-26. [ ] 33/123 Installing : python-rpm-macros-3-26. [====================== ] 33/123 Installing : python-rpm-macros-3-26.fc28.noarch 33/123 Installing : libcroco-0.6.12-4.fc28. [ ] 34/123 Installing : libcroco-0.6.12-4.fc28. [= ] 34/123 Installing : libcroco-0.6.12-4.fc28. [== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [=== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [==== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [===== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [====== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [======= ] 34/123 Installing : libcroco-0.6.12-4.fc28. [======== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [========= ] 34/123 Installing : libcroco-0.6.12-4.fc28. [========== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [=========== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [============ ] 34/123 Installing : libcroco-0.6.12-4.fc28. [============= ] 34/123 Installing : libcroco-0.6.12-4.fc28. [============== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [=============== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [================ ] 34/123 Installing : libcroco-0.6.12-4.fc28. [================= ] 34/123 Installing : libcroco-0.6.12-4.fc28. [================== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [=================== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [==================== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [===================== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [====================== ] 34/123 Installing : libcroco-0.6.12-4.fc28. [======================= ] 34/123 Installing : libcroco-0.6.12-4.fc28.riscv64 34/123 Running scriptlet: libcroco-0.6.12-4.fc28.riscv64 34/123 Installing : gettext-libs-0.19.8.1-1 [ ] 35/123 Installing : gettext-libs-0.19.8.1-1 [= ] 35/123 Installing : gettext-libs-0.19.8.1-1 [== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [=== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [==== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [===== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [====== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [======= ] 35/123 Installing : gettext-libs-0.19.8.1-1 [======== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [========= ] 35/123 Installing : gettext-libs-0.19.8.1-1 [========== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [=========== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [============ ] 35/123 Installing : gettext-libs-0.19.8.1-1 [============= ] 35/123 Installing : gettext-libs-0.19.8.1-1 [============== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [=============== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [================ ] 35/123 Installing : gettext-libs-0.19.8.1-1 [================= ] 35/123 Installing : gettext-libs-0.19.8.1-1 [================== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [=================== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [==================== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [===================== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [====================== ] 35/123 Installing : gettext-libs-0.19.8.1-1 [======================= ] 35/123 Installing : gettext-libs-0.19.8.1-14.fc28.riscv64 35/123 Installing : perl-HTTP-Date-6.02-17. [ ] 36/123 Installing : perl-HTTP-Date-6.02-17. [====== ] 36/123 Installing : perl-HTTP-Date-6.02-17. [========== ] 36/123 Installing : perl-HTTP-Date-6.02-17. [=========== ] 36/123 Installing : perl-HTTP-Date-6.02-17. [======================= ] 36/123 Installing : perl-HTTP-Date-6.02-17.fc27.noarch 36/123 Installing : perl-Compress-Raw-Bzip2 [ ] 37/123 Installing : perl-Compress-Raw-Bzip2 [= ] 37/123 Installing : perl-Compress-Raw-Bzip2 [====== ] 37/123 Installing : perl-Compress-Raw-Bzip2 [=========== ] 37/123 Installing : perl-Compress-Raw-Bzip2 [=============== ] 37/123 Installing : perl-Compress-Raw-Bzip2 [==================== ] 37/123 Installing : perl-Compress-Raw-Bzip2 [======================= ] 37/123 Installing : perl-Compress-Raw-Bzip2-2.074-408.fc27.0.riscv64 37/123 Installing : perl-Net-SSLeay-1.81-4. [ ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [= ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [=== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [==== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [===== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [====== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [======= ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [======== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [========= ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [========== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [=========== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [============ ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [============= ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [============== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [=============== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [================ ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [================= ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [================== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [=================== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [==================== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [===================== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [====================== ] 38/123 Installing : perl-Net-SSLeay-1.81-4. [======================= ] 38/123 Installing : perl-Net-SSLeay-1.81-4.fc28.riscv64 38/123 Installing : perl-Digest-1.17-408.fc [ ] 39/123 Installing : perl-Digest-1.17-408.fc [===== ] 39/123 Installing : perl-Digest-1.17-408.fc [======= ] 39/123 Installing : perl-Digest-1.17-408.fc [========= ] 39/123 Installing : perl-Digest-1.17-408.fc [==================== ] 39/123 Installing : perl-Digest-1.17-408.fc [====================== ] 39/123 Installing : perl-Digest-1.17-408.fc [======================= ] 39/123 Installing : perl-Digest-1.17-408.fc27.0.riscv64.noarch 39/123 Installing : perl-HTML-Tagset-3.20-3 [ ] 40/123 Installing : perl-HTML-Tagset-3.20-3 [= ] 40/123 Installing : perl-HTML-Tagset-3.20-3 [=== ] 40/123 Installing : perl-HTML-Tagset-3.20-3 [======= ] 40/123 Installing : perl-HTML-Tagset-3.20-3 [======== ] 40/123 Installing : perl-HTML-Tagset-3.20-3 [======================= ] 40/123 Installing : perl-HTML-Tagset-3.20-31.fc27.noarch 40/123 Installing : perl-ExtUtils-Command-1 [ ] 41/123 Installing : perl-ExtUtils-Command-1 [===== ] 41/123 Installing : perl-ExtUtils-Command-1 [======================= ] 41/123 Installing : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 41/123 Installing : perl-ExtUtils-Manifest- [ ] 42/123 Installing : perl-ExtUtils-Manifest- [==== ] 42/123 Installing : perl-ExtUtils-Manifest- [===== ] 42/123 Installing : perl-ExtUtils-Manifest- [======================= ] 42/123 Installing : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.n 42/123 Installing : perl-version-6:0.99.18- [ ] 43/123 Installing : perl-version-6:0.99.18- [=== ] 43/123 Installing : perl-version-6:0.99.18- [====== ] 43/123 Installing : perl-version-6:0.99.18- [========== ] 43/123 Installing : perl-version-6:0.99.18- [============= ] 43/123 Installing : perl-version-6:0.99.18- [============== ] 43/123 Installing : perl-version-6:0.99.18- [=============== ] 43/123 Installing : perl-version-6:0.99.18- [================= ] 43/123 Installing : perl-version-6:0.99.18- [================== ] 43/123 Installing : perl-version-6:0.99.18- [==================== ] 43/123 Installing : perl-version-6:0.99.18- [====================== ] 43/123 Installing : perl-version-6:0.99.18- [======================= ] 43/123 Installing : perl-version-6:0.99.18-5.fc28.riscv64 43/123 Installing : perl-Term-Cap-1.17-408. [ ] 44/123 Installing : perl-Term-Cap-1.17-408. [==== ] 44/123 Installing : perl-Term-Cap-1.17-408. [======================= ] 44/123 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 44/123 Installing : perl-Pod-Escapes-1:1.07 [ ] 45/123 Installing : perl-Pod-Escapes-1:1.07 [==== ] 45/123 Installing : perl-Pod-Escapes-1:1.07 [======================= ] 45/123 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarc 45/123 Installing : perl-Encode-4:2.94-16.f [ ] 46/123 Installing : perl-Encode-4:2.94-16.f [= ] 46/123 Installing : perl-Encode-4:2.94-16.f [== ] 46/123 Installing : perl-Encode-4:2.94-16.f [=== ] 46/123 Installing : perl-Encode-4:2.94-16.f [==== ] 46/123 Installing : perl-Encode-4:2.94-16.f [===== ] 46/123 Installing : perl-Encode-4:2.94-16.f [====== ] 46/123 Installing : perl-Encode-4:2.94-16.f [======= ] 46/123 Installing : perl-Encode-4:2.94-16.f [======== ] 46/123 Installing : perl-Encode-4:2.94-16.f [========= ] 46/123 Installing : perl-Encode-4:2.94-16.f [========== ] 46/123 Installing : perl-Encode-4:2.94-16.f [=========== ] 46/123 Installing : perl-Encode-4:2.94-16.f [============ ] 46/123 Installing : perl-Encode-4:2.94-16.f [============= ] 46/123 Installing : perl-Encode-4:2.94-16.f [============== ] 46/123 Installing : perl-Encode-4:2.94-16.f [=============== ] 46/123 Installing : perl-Encode-4:2.94-16.f [================ ] 46/123 Installing : perl-Encode-4:2.94-16.f [================= ] 46/123 Installing : perl-Encode-4:2.94-16.f [================== ] 46/123 Installing : perl-Encode-4:2.94-16.f [=================== ] 46/123 Installing : perl-Encode-4:2.94-16.f [==================== ] 46/123 Installing : perl-Encode-4:2.94-16.f [===================== ] 46/123 Installing : perl-Encode-4:2.94-16.f [====================== ] 46/123 Installing : perl-Encode-4:2.94-16.f [======================= ] 46/123 Installing : perl-Encode-4:2.94-16.fc27.riscv64 46/123 Installing : perl-Pod-Simple-1:3.35- [ ] 47/123 Installing : perl-Pod-Simple-1:3.35- [= ] 47/123 Installing : perl-Pod-Simple-1:3.35- [== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [=== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [==== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [===== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [====== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [======= ] 47/123 Installing : perl-Pod-Simple-1:3.35- [======== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [========== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [=========== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [============ ] 47/123 Installing : perl-Pod-Simple-1:3.35- [============= ] 47/123 Installing : perl-Pod-Simple-1:3.35- [============== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [=============== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [================ ] 47/123 Installing : perl-Pod-Simple-1:3.35- [================= ] 47/123 Installing : perl-Pod-Simple-1:3.35- [================== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [=================== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [==================== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [===================== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [====================== ] 47/123 Installing : perl-Pod-Simple-1:3.35- [======================= ] 47/123 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 47/123 Installing : perl-Getopt-Long-1:2.50 [ ] 48/123 Installing : perl-Getopt-Long-1:2.50 [=== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [==== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [===== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [====== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [========= ] 48/123 Installing : perl-Getopt-Long-1:2.50 [============== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [==================== ] 48/123 Installing : perl-Getopt-Long-1:2.50 [======================= ] 48/123 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 48/123 Installing : perl-podlators-4.09-408 [ ] 49/123 Installing : perl-podlators-4.09-408 [= ] 49/123 Installing : perl-podlators-4.09-408 [== ] 49/123 Installing : perl-podlators-4.09-408 [=== ] 49/123 Installing : perl-podlators-4.09-408 [==== ] 49/123 Installing : perl-podlators-4.09-408 [===== ] 49/123 Installing : perl-podlators-4.09-408 [====== ] 49/123 Installing : perl-podlators-4.09-408 [======= ] 49/123 Installing : perl-podlators-4.09-408 [=========== ] 49/123 Installing : perl-podlators-4.09-408 [============== ] 49/123 Installing : perl-podlators-4.09-408 [================ ] 49/123 Installing : perl-podlators-4.09-408 [==================== ] 49/123 Installing : perl-podlators-4.09-408 [===================== ] 49/123 Installing : perl-podlators-4.09-408 [====================== ] 49/123 Installing : perl-podlators-4.09-408 [======================= ] 49/123 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 49/123 Installing : perl-Pod-Perldoc-3.28-4 [ ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [= ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [=== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [==== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [===== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [========== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [=============== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [================ ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [================= ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [=================== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [==================== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [===================== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [====================== ] 50/123 Installing : perl-Pod-Perldoc-3.28-4 [======================= ] 50/123 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 50/123 Installing : perl-Pod-Usage-4:1.69-4 [ ] 51/123 Installing : perl-Pod-Usage-4:1.69-4 [== ] 51/123 Installing : perl-Pod-Usage-4:1.69-4 [=== ] 51/123 Installing : perl-Pod-Usage-4:1.69-4 [======= ] 51/123 Installing : perl-Pod-Usage-4:1.69-4 [======================= ] 51/123 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 51/123 Installing : perl-URI-1.72-1.fc27.no [ ] 52/123 Installing : perl-URI-1.72-1.fc27.no [== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [=== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [===== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [====== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [======= ] 52/123 Installing : perl-URI-1.72-1.fc27.no [======== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [============ ] 52/123 Installing : perl-URI-1.72-1.fc27.no [============= ] 52/123 Installing : perl-URI-1.72-1.fc27.no [============== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [=============== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [================ ] 52/123 Installing : perl-URI-1.72-1.fc27.no [================= ] 52/123 Installing : perl-URI-1.72-1.fc27.no [================== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [=================== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [==================== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [===================== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [====================== ] 52/123 Installing : perl-URI-1.72-1.fc27.no [======================= ] 52/123 Installing : perl-URI-1.72-1.fc27.noarch 52/123 Installing : perl-ExtUtils-ParseXS-1 [ ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [=== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [==== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [===== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [====== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [=========== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [=============== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [================ ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [================== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [====================== ] 53/123 Installing : perl-ExtUtils-ParseXS-1 [======================= ] 53/123 Installing : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 53/123 Installing : perl-Test-Harness-1:3.3 [ ] 54/123 Installing : perl-Test-Harness-1:3.3 [= ] 54/123 Installing : perl-Test-Harness-1:3.3 [== ] 54/123 Installing : perl-Test-Harness-1:3.3 [=== ] 54/123 Installing : perl-Test-Harness-1:3.3 [==== ] 54/123 Installing : perl-Test-Harness-1:3.3 [===== ] 54/123 Installing : perl-Test-Harness-1:3.3 [====== ] 54/123 Installing : perl-Test-Harness-1:3.3 [======= ] 54/123 Installing : perl-Test-Harness-1:3.3 [======== ] 54/123 Installing : perl-Test-Harness-1:3.3 [========= ] 54/123 Installing : perl-Test-Harness-1:3.3 [========== ] 54/123 Installing : perl-Test-Harness-1:3.3 [=========== ] 54/123 Installing : perl-Test-Harness-1:3.3 [============ ] 54/123 Installing : perl-Test-Harness-1:3.3 [============= ] 54/123 Installing : perl-Test-Harness-1:3.3 [============== ] 54/123 Installing : perl-Test-Harness-1:3.3 [================ ] 54/123 Installing : perl-Test-Harness-1:3.3 [================= ] 54/123 Installing : perl-Test-Harness-1:3.3 [================== ] 54/123 Installing : perl-Test-Harness-1:3.3 [=================== ] 54/123 Installing : perl-Test-Harness-1:3.3 [==================== ] 54/123 Installing : perl-Test-Harness-1:3.3 [===================== ] 54/123 Installing : perl-Test-Harness-1:3.3 [====================== ] 54/123 Installing : perl-Test-Harness-1:3.3 [======================= ] 54/123 Installing : perl-Test-Harness-1:3.39-4.fc27.noarch 54/123 Installing : perl-devel-4:5.26.1-408 [ ] 55/123 Installing : perl-devel-4:5.26.1-408 [= ] 55/123 Installing : perl-devel-4:5.26.1-408 [== ] 55/123 Installing : perl-devel-4:5.26.1-408 [=== ] 55/123 Installing : perl-devel-4:5.26.1-408 [==== ] 55/123 Installing : perl-devel-4:5.26.1-408 [===== ] 55/123 Installing : perl-devel-4:5.26.1-408 [====== ] 55/123 Installing : perl-devel-4:5.26.1-408 [======= ] 55/123 Installing : perl-devel-4:5.26.1-408 [======== ] 55/123 Installing : perl-devel-4:5.26.1-408 [========= ] 55/123 Installing : perl-devel-4:5.26.1-408 [========== ] 55/123 Installing : perl-devel-4:5.26.1-408 [=========== ] 55/123 Installing : perl-devel-4:5.26.1-408 [============ ] 55/123 Installing : perl-devel-4:5.26.1-408 [============= ] 55/123 Installing : perl-devel-4:5.26.1-408 [============== ] 55/123 Installing : perl-devel-4:5.26.1-408 [=============== ] 55/123 Installing : perl-devel-4:5.26.1-408 [================ ] 55/123 Installing : perl-devel-4:5.26.1-408 [================= ] 55/123 Installing : perl-devel-4:5.26.1-408 [================== ] 55/123 Installing : perl-devel-4:5.26.1-408 [=================== ] 55/123 Installing : perl-devel-4:5.26.1-408 [==================== ] 55/123 Installing : perl-devel-4:5.26.1-408 [===================== ] 55/123 Installing : perl-devel-4:5.26.1-408 [====================== ] 55/123 Installing : perl-devel-4:5.26.1-408 [======================= ] 55/123 Installing : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 55/123 Installing : perl-ExtUtils-Install-2 [ ] 56/123 Installing : perl-ExtUtils-Install-2 [=== ] 56/123 Installing : perl-ExtUtils-Install-2 [==== ] 56/123 Installing : perl-ExtUtils-Install-2 [===== ] 56/123 Installing : perl-ExtUtils-Install-2 [====== ] 56/123 Installing : perl-ExtUtils-Install-2 [=============== ] 56/123 Installing : perl-ExtUtils-Install-2 [================= ] 56/123 Installing : perl-ExtUtils-Install-2 [===================== ] 56/123 Installing : perl-ExtUtils-Install-2 [======================= ] 56/123 Installing : perl-ExtUtils-Install-2.14-3.fc27.noarch 56/123 Installing : perl-ExtUtils-MakeMaker [ ] 57/123 Installing : perl-ExtUtils-MakeMaker [= ] 57/123 Installing : perl-ExtUtils-MakeMaker [== ] 57/123 Installing : perl-ExtUtils-MakeMaker [=== ] 57/123 Installing : perl-ExtUtils-MakeMaker [==== ] 57/123 Installing : perl-ExtUtils-MakeMaker [===== ] 57/123 Installing : perl-ExtUtils-MakeMaker [====== ] 57/123 Installing : perl-ExtUtils-MakeMaker [======= ] 57/123 Installing : perl-ExtUtils-MakeMaker [======== ] 57/123 Installing : perl-ExtUtils-MakeMaker [========= ] 57/123 Installing : perl-ExtUtils-MakeMaker [========== ] 57/123 Installing : perl-ExtUtils-MakeMaker [=========== ] 57/123 Installing : perl-ExtUtils-MakeMaker [============ ] 57/123 Installing : perl-ExtUtils-MakeMaker [============= ] 57/123 Installing : perl-ExtUtils-MakeMaker [============== ] 57/123 Installing : perl-ExtUtils-MakeMaker [=============== ] 57/123 Installing : perl-ExtUtils-MakeMaker [================ ] 57/123 Installing : perl-ExtUtils-MakeMaker [================= ] 57/123 Installing : perl-ExtUtils-MakeMaker [================== ] 57/123 Installing : perl-ExtUtils-MakeMaker [=================== ] 57/123 Installing : perl-ExtUtils-MakeMaker [===================== ] 57/123 Installing : perl-ExtUtils-MakeMaker [====================== ] 57/123 Installing : perl-ExtUtils-MakeMaker [======================= ] 57/123 Installing : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 57/123 Installing : perl-Encode-Locale-1.05 [ ] 58/123 Installing : perl-Encode-Locale-1.05 [=== ] 58/123 Installing : perl-Encode-Locale-1.05 [==== ] 58/123 Installing : perl-Encode-Locale-1.05 [========= ] 58/123 Installing : perl-Encode-Locale-1.05 [======================= ] 58/123 Installing : perl-Encode-Locale-1.05-8.fc27.noarch 58/123 Installing : perl-IO-HTML-1.001-9.fc [ ] 59/123 Installing : perl-IO-HTML-1.001-9.fc [========== ] 59/123 Installing : perl-IO-HTML-1.001-9.fc [=========== ] 59/123 Installing : perl-IO-HTML-1.001-9.fc [============= ] 59/123 Installing : perl-IO-HTML-1.001-9.fc [============== ] 59/123 Installing : perl-IO-HTML-1.001-9.fc [======================= ] 59/123 Installing : perl-IO-HTML-1.001-9.fc27.noarch 59/123 Installing : perl-IO-Compress-2.074- [ ] 60/123 Installing : perl-IO-Compress-2.074- [= ] 60/123 Installing : perl-IO-Compress-2.074- [== ] 60/123 Installing : perl-IO-Compress-2.074- [=== ] 60/123 Installing : perl-IO-Compress-2.074- [==== ] 60/123 Installing : perl-IO-Compress-2.074- [===== ] 60/123 Installing : perl-IO-Compress-2.074- [====== ] 60/123 Installing : perl-IO-Compress-2.074- [======= ] 60/123 Installing : perl-IO-Compress-2.074- [======== ] 60/123 Installing : perl-IO-Compress-2.074- [========= ] 60/123 Installing : perl-IO-Compress-2.074- [========== ] 60/123 Installing : perl-IO-Compress-2.074- [=========== ] 60/123 Installing : perl-IO-Compress-2.074- [============ ] 60/123 Installing : perl-IO-Compress-2.074- [============= ] 60/123 Installing : perl-IO-Compress-2.074- [============== ] 60/123 Installing : perl-IO-Compress-2.074- [=============== ] 60/123 Installing : perl-IO-Compress-2.074- [================ ] 60/123 Installing : perl-IO-Compress-2.074- [================= ] 60/123 Installing : perl-IO-Compress-2.074- [================== ] 60/123 Installing : perl-IO-Compress-2.074- [=================== ] 60/123 Installing : perl-IO-Compress-2.074- [==================== ] 60/123 Installing : perl-IO-Compress-2.074- [===================== ] 60/123 Installing : perl-IO-Compress-2.074- [====================== ] 60/123 Installing : perl-IO-Compress-2.074- [======================= ] 60/123 Installing : perl-IO-Compress-2.074-408.fc27.0.riscv64.noarch 60/123 Installing : perl-CPAN-Meta-YAML-0.0 [ ] 61/123 Installing : perl-CPAN-Meta-YAML-0.0 [== ] 61/123 Installing : perl-CPAN-Meta-YAML-0.0 [======================= ] 61/123 Installing : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noa 61/123 Installing : perl-Math-Complex-1.59- [ ] 62/123 Installing : perl-Math-Complex-1.59- [== ] 62/123 Installing : perl-Math-Complex-1.59- [==== ] 62/123 Installing : perl-Math-Complex-1.59- [============= ] 62/123 Installing : perl-Math-Complex-1.59- [================== ] 62/123 Installing : perl-Math-Complex-1.59- [======================= ] 62/123 Installing : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 62/123 Installing : perl-Math-BigInt-1:1.99 [ ] 63/123 Installing : perl-Math-BigInt-1:1.99 [= ] 63/123 Installing : perl-Math-BigInt-1:1.99 [== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [=== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [==== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [===== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [====== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [======= ] 63/123 Installing : perl-Math-BigInt-1:1.99 [======== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [========= ] 63/123 Installing : perl-Math-BigInt-1:1.99 [=========== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [============ ] 63/123 Installing : perl-Math-BigInt-1:1.99 [============= ] 63/123 Installing : perl-Math-BigInt-1:1.99 [=============== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [================ ] 63/123 Installing : perl-Math-BigInt-1:1.99 [================= ] 63/123 Installing : perl-Math-BigInt-1:1.99 [================== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [==================== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [===================== ] 63/123 Installing : perl-Math-BigInt-1:1.99 [======================= ] 63/123 Installing : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 63/123 Installing : perl-JSON-PP-1:2.94-4.f [ ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [=== ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [====== ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [======= ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [============= ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [=================== ] 64/123 Installing : perl-JSON-PP-1:2.94-4.f [======================= ] 64/123 Installing : perl-JSON-PP-1:2.94-4.fc27.noarch 64/123 Installing : perl-CPAN-Meta-Requirem [ ] 65/123 Installing : perl-CPAN-Meta-Requirem [=== ] 65/123 Installing : perl-CPAN-Meta-Requirem [======================= ] 65/123 Installing : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.ris 65/123 Installing : perl-Fedora-VSP-0.001-8 [ ] 66/123 Installing : perl-Fedora-VSP-0.001-8 [================== ] 66/123 Installing : perl-Fedora-VSP-0.001-8 [==================== ] 66/123 Installing : perl-Fedora-VSP-0.001-8 [===================== ] 66/123 Installing : perl-Fedora-VSP-0.001-8 [======================= ] 66/123 Installing : perl-Fedora-VSP-0.001-8.fc27.noarch 66/123 Installing : unzip-6.0-36.fc28.riscv [ ] 67/123 Installing : unzip-6.0-36.fc28.riscv [= ] 67/123 Installing : unzip-6.0-36.fc28.riscv [== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [=== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [==== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [===== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [====== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [======= ] 67/123 Installing : unzip-6.0-36.fc28.riscv [======== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [========= ] 67/123 Installing : unzip-6.0-36.fc28.riscv [========== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [=========== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [============ ] 67/123 Installing : unzip-6.0-36.fc28.riscv [============= ] 67/123 Installing : unzip-6.0-36.fc28.riscv [============== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [=============== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [================ ] 67/123 Installing : unzip-6.0-36.fc28.riscv [================= ] 67/123 Installing : unzip-6.0-36.fc28.riscv [================== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [=================== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [==================== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [===================== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [====================== ] 67/123 Installing : unzip-6.0-36.fc28.riscv [======================= ] 67/123 Installing : unzip-6.0-36.fc28.riscv64 67/123 Installing : zip-3.0-20.fc28.riscv64 [ ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [=== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [==== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [===== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [====== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [======= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [======== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [========= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [========== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [============ ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [============= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [============== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [================ ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [================= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [================== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 68/123 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 68/123 Installing : zip-3.0-20.fc28.riscv64 68/123 Installing : dwz-0.12-5.fc28.riscv64 [ ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [====== ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [========== ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [============== ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [================= ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [=================== ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 [======================= ] 69/123 Installing : dwz-0.12-5.fc28.riscv64 69/123 Installing : perl-srpm-macros-1-26.f [ ] 70/123 Installing : perl-srpm-macros-1-26.f [===================== ] 70/123 Installing : perl-srpm-macros-1-26.fc28.noarch 70/123 Installing : go-srpm-macros-2-11.fc2 [ ] 71/123 Installing : go-srpm-macros-2-11.fc2 [===================== ] 71/123 Installing : go-srpm-macros-2-11.fc28.noarch 71/123 Installing : gnat-srpm-macros-4-5.fc [ ] 72/123 Installing : gnat-srpm-macros-4-5.fc [===================== ] 72/123 Installing : gnat-srpm-macros-4-5.fc28.noarch 72/123 Installing : ghc-srpm-macros-1.4.2-7 [ ] 73/123 Installing : ghc-srpm-macros-1.4.2-7 [=================== ] 73/123 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 73/123 Installing : fpc-srpm-macros-1.1-4.f [ ] 74/123 Installing : fpc-srpm-macros-1.1-4.f [================ ] 74/123 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 74/123 Installing : python2-rpm-macros-3-26 [ ] 75/123 Installing : python2-rpm-macros-3-26 [====================== ] 75/123 Installing : python2-rpm-macros-3-26.fc28.noarch 75/123 Installing : file-5.32-3.fc28.riscv6 [ ] 76/123 Installing : file-5.32-3.fc28.riscv6 [====== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [========== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [=========== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [================= ] 76/123 Installing : file-5.32-3.fc28.riscv6 [==================== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [===================== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [====================== ] 76/123 Installing : file-5.32-3.fc28.riscv6 [======================= ] 76/123 Installing : file-5.32-3.fc28.riscv64 76/123 Installing : rust-srpm-macros-5-1.fc [ ] 77/123 Installing : rust-srpm-macros-5-1.fc [== ] 77/123 Installing : rust-srpm-macros-5-1.fc [===== ] 77/123 Installing : rust-srpm-macros-5-1.fc [====================== ] 77/123 Installing : rust-srpm-macros-5-1.fc28.noarch 77/123 Installing : qt5-srpm-macros-5.10.0- [ ] 78/123 Installing : qt5-srpm-macros-5.10.0- [=================== ] 78/123 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 78/123 Installing : openblas-srpm-macros-2- [ ] 79/123 Installing : openblas-srpm-macros-2- [================ ] 79/123 Installing : openblas-srpm-macros-2-2.fc27.noarch 79/123 Installing : ocaml-srpm-macros-5-2.f [ ] 80/123 Installing : ocaml-srpm-macros-5-2.f [==================== ] 80/123 Installing : ocaml-srpm-macros-5-2.fc27.noarch 80/123 Installing : nim-srpm-macros-1-1.fc2 [ ] 81/123 Installing : nim-srpm-macros-1-1.fc2 [== ] 81/123 Installing : nim-srpm-macros-1-1.fc2 [==== ] 81/123 Installing : nim-srpm-macros-1-1.fc2 [====================== ] 81/123 Installing : nim-srpm-macros-1-1.fc28.noarch 81/123 Installing : redhat-rpm-config-96-1. [ ] 82/123 Installing : redhat-rpm-config-96-1. [== ] 82/123 Installing : redhat-rpm-config-96-1. [=== ] 82/123 Installing : redhat-rpm-config-96-1. [========= ] 82/123 Installing : redhat-rpm-config-96-1. [=========== ] 82/123 Installing : redhat-rpm-config-96-1. [================ ] 82/123 Installing : redhat-rpm-config-96-1. [================= ] 82/123 Installing : redhat-rpm-config-96-1. [================== ] 82/123 Installing : redhat-rpm-config-96-1. [==================== ] 82/123 Installing : redhat-rpm-config-96-1. [===================== ] 82/123 Installing : redhat-rpm-config-96-1. [======================= ] 82/123 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 82/123 Installing : python3-rpm-macros-3-26 [ ] 83/123 Installing : python3-rpm-macros-3-26 [====================== ] 83/123 Installing : python3-rpm-macros-3-26.fc28.noarch 83/123 Installing : python3-setuptools-38.4 [ ] 84/123 Installing : python3-setuptools-38.4 [= ] 84/123 Installing : python3-setuptools-38.4 [== ] 84/123 Installing : python3-setuptools-38.4 [=== ] 84/123 Installing : python3-setuptools-38.4 [==== ] 84/123 Installing : python3-setuptools-38.4 [===== ] 84/123 Installing : python3-setuptools-38.4 [====== ] 84/123 Installing : python3-setuptools-38.4 [======= ] 84/123 Installing : python3-setuptools-38.4 [======== ] 84/123 Installing : python3-setuptools-38.4 [========= ] 84/123 Installing : python3-setuptools-38.4 [========== ] 84/123 Installing : python3-setuptools-38.4 [=========== ] 84/123 Installing : python3-setuptools-38.4 [============ ] 84/123 Installing : python3-setuptools-38.4 [============= ] 84/123 Installing : python3-setuptools-38.4 [============== ] 84/123 Installing : python3-setuptools-38.4 [=============== ] 84/123 Installing : python3-setuptools-38.4 [================ ] 84/123 Installing : python3-setuptools-38.4 [================= ] 84/123 Installing : python3-setuptools-38.4 [================== ] 84/123 Installing : python3-setuptools-38.4 [=================== ] 84/123 Installing : python3-setuptools-38.4 [==================== ] 84/123 Installing : python3-setuptools-38.4 [===================== ] 84/123 Installing : python3-setuptools-38.4 [====================== ] 84/123 Installing : python3-setuptools-38.4 [======================= ] 84/123 Installing : python3-setuptools-38.4.0-3.fc28.noarch 84/123 Installing : python3-rpm-generators- [ ] 85/123 Installing : python3-rpm-generators- [===== ] 85/123 Installing : python3-rpm-generators- [================== ] 85/123 Installing : python3-rpm-generators- [======================= ] 85/123 Installing : python3-rpm-generators-5-1.fc28.noarch 85/123 Installing : libpkgconf-1.4.1-1.fc27 [ ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [=== ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [====== ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [========== ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [============== ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [================= ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [===================== ] 86/123 Installing : libpkgconf-1.4.1-1.fc27 [======================= ] 86/123 Installing : libpkgconf-1.4.1-1.fc27.riscv64 86/123 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 86/123 Installing : pkgconf-1.4.1-1.fc27.ri [ ] 87/123 Installing : pkgconf-1.4.1-1.fc27.ri [============ ] 87/123 Installing : pkgconf-1.4.1-1.fc27.ri [============== ] 87/123 Installing : pkgconf-1.4.1-1.fc27.ri [=================== ] 87/123 Installing : pkgconf-1.4.1-1.fc27.ri [===================== ] 87/123 Installing : pkgconf-1.4.1-1.fc27.ri [======================= ] 87/123 Installing : pkgconf-1.4.1-1.fc27.riscv64 87/123 Installing : pkgconf-m4-1.4.1-1.fc27 [ ] 88/123 Installing : pkgconf-m4-1.4.1-1.fc27 [==================== ] 88/123 Installing : pkgconf-m4-1.4.1-1.fc27 [======================= ] 88/123 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 88/123 Installing : pkgconf-pkg-config-1.4. [ ] 89/123 Installing : pkgconf-pkg-config-1.4. [==== ] 89/123 Installing : pkgconf-pkg-config-1.4. [===== ] 89/123 Installing : pkgconf-pkg-config-1.4. [====================== ] 89/123 Installing : pkgconf-pkg-config-1.4. [======================= ] 89/123 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 89/123 Installing : zlib-devel-1.2.11-4.fc2 [ ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [== ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [======= ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [============= ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [================== ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [=================== ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [====================== ] 90/123 Installing : zlib-devel-1.2.11-4.fc2 [======================= ] 90/123 Installing : zlib-devel-1.2.11-4.fc28.riscv64 90/123 Installing : openssl-1:1.1.0g-2.fc28 [ ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [=== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [==== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [===== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [====== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [======= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [======== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [========= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [========== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [=========== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [============ ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [============= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [============== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [=============== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [================ ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [================= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [================== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [=================== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [==================== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [===================== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [====================== ] 91/123 Installing : openssl-1:1.1.0g-2.fc28 [======================= ] 91/123 Installing : openssl-1:1.1.0g-2.fc28.riscv64 91/123 Installing : perl-IO-Socket-SSL-2.05 [ ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [= ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [=== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [==== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [===== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [====== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [======= ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [========= ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [========== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [============ ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [============= ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [============== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [=============== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [================= ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [================== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [=================== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [===================== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [====================== ] 92/123 Installing : perl-IO-Socket-SSL-2.05 [======================= ] 92/123 Installing : perl-IO-Socket-SSL-2.051-1.fc27.noarch 92/123 Installing : perl-Net-SMTP-SSL-1.04- [ ] 93/123 Installing : perl-Net-SMTP-SSL-1.04- [== ] 93/123 Installing : perl-Net-SMTP-SSL-1.04- [====== ] 93/123 Installing : perl-Net-SMTP-SSL-1.04- [============== ] 93/123 Installing : perl-Net-SMTP-SSL-1.04- [=============== ] 93/123 Installing : perl-Net-SMTP-SSL-1.04- [======================= ] 93/123 Installing : perl-Net-SMTP-SSL-1.04-4.fc27.noarch 93/123 Installing : pcre2-utf32-10.31-0.3.R [ ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [= ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [=== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [==== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [===== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [====== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [======= ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [======== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [========= ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [========== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [=========== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [============ ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [============= ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [============== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [=============== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [================ ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [================= ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [================== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [=================== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [==================== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [===================== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [====================== ] 94/123 Installing : pcre2-utf32-10.31-0.3.R [======================= ] 94/123 Installing : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 94/123 Installing : pcre2-utf16-10.31-0.3.R [ ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [= ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [=== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [==== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [===== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [====== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [======= ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [======== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [========= ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [========== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [=========== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [============ ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [============= ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [============== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [=============== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [================ ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [================= ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [================== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [=================== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [==================== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [===================== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [====================== ] 95/123 Installing : pcre2-utf16-10.31-0.3.R [======================= ] 95/123 Installing : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 95/123 Installing : mailcap-2.1.48-2.fc27.n [ ] 96/123 Installing : mailcap-2.1.48-2.fc27.n [========== ] 96/123 Installing : mailcap-2.1.48-2.fc27.n [=================== ] 96/123 Installing : mailcap-2.1.48-2.fc27.n [====================== ] 96/123 Installing : mailcap-2.1.48-2.fc27.n [======================= ] 96/123 Installing : mailcap-2.1.48-2.fc27.noarch 96/123 Installing : perl-LWP-MediaTypes-6.0 [ ] 97/123 Installing : perl-LWP-MediaTypes-6.0 [= ] 97/123 Installing : perl-LWP-MediaTypes-6.0 [== ] 97/123 Installing : perl-LWP-MediaTypes-6.0 [==== ] 97/123 Installing : perl-LWP-MediaTypes-6.0 [================= ] 97/123 Installing : perl-LWP-MediaTypes-6.0 [======================= ] 97/123 Installing : perl-LWP-MediaTypes-6.02-13.fc27.noarch 97/123 Installing : perl-HTTP-Message-6.14- [ ] 98/123 Installing : perl-HTTP-Message-6.14- [= ] 98/123 Installing : perl-HTTP-Message-6.14- [==== ] 98/123 Installing : perl-HTTP-Message-6.14- [===== ] 98/123 Installing : perl-HTTP-Message-6.14- [====== ] 98/123 Installing : perl-HTTP-Message-6.14- [======= ] 98/123 Installing : perl-HTTP-Message-6.14- [======== ] 98/123 Installing : perl-HTTP-Message-6.14- [========= ] 98/123 Installing : perl-HTTP-Message-6.14- [============ ] 98/123 Installing : perl-HTTP-Message-6.14- [============= ] 98/123 Installing : perl-HTTP-Message-6.14- [============== ] 98/123 Installing : perl-HTTP-Message-6.14- [================= ] 98/123 Installing : perl-HTTP-Message-6.14- [================== ] 98/123 Installing : perl-HTTP-Message-6.14- [==================== ] 98/123 Installing : perl-HTTP-Message-6.14- [====================== ] 98/123 Installing : perl-HTTP-Message-6.14- [======================= ] 98/123 Installing : perl-HTTP-Message-6.14-1.fc27.noarch 98/123 Installing : perl-HTML-Parser-3.72-1 [ ] 99/123 Installing : perl-HTML-Parser-3.72-1 [= ] 99/123 Installing : perl-HTML-Parser-3.72-1 [=== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [==== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [===== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [======= ] 99/123 Installing : perl-HTML-Parser-3.72-1 [========= ] 99/123 Installing : perl-HTML-Parser-3.72-1 [=========== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [============= ] 99/123 Installing : perl-HTML-Parser-3.72-1 [=============== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [================= ] 99/123 Installing : perl-HTML-Parser-3.72-1 [================== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [==================== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [===================== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [====================== ] 99/123 Installing : perl-HTML-Parser-3.72-1 [======================= ] 99/123 Installing : perl-HTML-Parser-3.72-10.fc28.0.riscv64.riscv64 99/123 Installing : perl-CGI-4.37-1.fc27.no [ ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [= ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [=== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [===== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [====== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [======= ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [======== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [========= ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [========== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [=========== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [============ ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [============== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [=============== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [================= ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [================== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [=================== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [==================== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [===================== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [====================== ] 100/123 Installing : perl-CGI-4.37-1.fc27.no [======================= ] 100/123 Installing : perl-CGI-4.37-1.fc27.noarch 100/123 Installing : pcre2-devel-10.31-0.3.R [ ] 101/123 Installing : pcre2-devel-10.31-0.3.R [= ] 101/123 Installing : pcre2-devel-10.31-0.3.R [== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [=== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [==== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [===== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [====== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [======= ] 101/123 Installing : pcre2-devel-10.31-0.3.R [======== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [========= ] 101/123 Installing : pcre2-devel-10.31-0.3.R [========== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [=========== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [============ ] 101/123 Installing : pcre2-devel-10.31-0.3.R [============= ] 101/123 Installing : pcre2-devel-10.31-0.3.R [============== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [=============== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [================ ] 101/123 Installing : pcre2-devel-10.31-0.3.R [================= ] 101/123 Installing : pcre2-devel-10.31-0.3.R [================== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [=================== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [==================== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [===================== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [====================== ] 101/123 Installing : pcre2-devel-10.31-0.3.R [======================= ] 101/123 Installing : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 101/123 Installing : perl-MailTools-2.19-1.f [ ] 102/123 Installing : perl-MailTools-2.19-1.f [=== ] 102/123 Installing : perl-MailTools-2.19-1.f [==== ] 102/123 Installing : perl-MailTools-2.19-1.f [===== ] 102/123 Installing : perl-MailTools-2.19-1.f [====== ] 102/123 Installing : perl-MailTools-2.19-1.f [======= ] 102/123 Installing : perl-MailTools-2.19-1.f [======== ] 102/123 Installing : perl-MailTools-2.19-1.f [========= ] 102/123 Installing : perl-MailTools-2.19-1.f [========== ] 102/123 Installing : perl-MailTools-2.19-1.f [=========== ] 102/123 Installing : perl-MailTools-2.19-1.f [============ ] 102/123 Installing : perl-MailTools-2.19-1.f [============= ] 102/123 Installing : perl-MailTools-2.19-1.f [============== ] 102/123 Installing : perl-MailTools-2.19-1.f [=============== ] 102/123 Installing : perl-MailTools-2.19-1.f [================ ] 102/123 Installing : perl-MailTools-2.19-1.f [================= ] 102/123 Installing : perl-MailTools-2.19-1.f [=================== ] 102/123 Installing : perl-MailTools-2.19-1.f [==================== ] 102/123 Installing : perl-MailTools-2.19-1.f [===================== ] 102/123 Installing : perl-MailTools-2.19-1.f [====================== ] 102/123 Installing : perl-MailTools-2.19-1.f [======================= ] 102/123 Installing : perl-MailTools-2.19-1.fc27.noarch 102/123 Installing : openssl-devel-1:1.1.0g- [ ] 103/123 Installing : openssl-devel-1:1.1.0g- [= ] 103/123 Installing : openssl-devel-1:1.1.0g- [== ] 103/123 Installing : openssl-devel-1:1.1.0g- [=== ] 103/123 Installing : openssl-devel-1:1.1.0g- [==== ] 103/123 Installing : openssl-devel-1:1.1.0g- [===== ] 103/123 Installing : openssl-devel-1:1.1.0g- [====== ] 103/123 Installing : openssl-devel-1:1.1.0g- [======= ] 103/123 Installing : openssl-devel-1:1.1.0g- [======== ] 103/123 Installing : openssl-devel-1:1.1.0g- [========= ] 103/123 Installing : openssl-devel-1:1.1.0g- [========== ] 103/123 Installing : openssl-devel-1:1.1.0g- [=========== ] 103/123 Installing : openssl-devel-1:1.1.0g- [============ ] 103/123 Installing : openssl-devel-1:1.1.0g- [============= ] 103/123 Installing : openssl-devel-1:1.1.0g- [============== ] 103/123 Installing : openssl-devel-1:1.1.0g- [=============== ] 103/123 Installing : openssl-devel-1:1.1.0g- [================ ] 103/123 Installing : openssl-devel-1:1.1.0g- [================= ] 103/123 Installing : openssl-devel-1:1.1.0g- [================== ] 103/123 Installing : openssl-devel-1:1.1.0g- [=================== ] 103/123 Installing : openssl-devel-1:1.1.0g- [==================== ] 103/123 Installing : openssl-devel-1:1.1.0g- [===================== ] 103/123 Installing : openssl-devel-1:1.1.0g- [====================== ] 103/123 Installing : openssl-devel-1:1.1.0g- [======================= ] 103/123 Installing : openssl-devel-1:1.1.0g-2.fc28.riscv64 103/123 Installing : expat-devel-2.2.5-1.fc2 [ ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [==== ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [====== ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [======= ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [======== ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [========= ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [============= ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [================== ] 104/123 Installing : expat-devel-2.2.5-1.fc2 [======================= ] 104/123 Installing : expat-devel-2.2.5-1.fc27.riscv64 104/123 Installing : libcurl-devel-7.58.0-6. [ ] 105/123 Installing : libcurl-devel-7.58.0-6. [= ] 105/123 Installing : libcurl-devel-7.58.0-6. [== ] 105/123 Installing : libcurl-devel-7.58.0-6. [=== ] 105/123 Installing : libcurl-devel-7.58.0-6. [==== ] 105/123 Installing : libcurl-devel-7.58.0-6. [===== ] 105/123 Installing : libcurl-devel-7.58.0-6. [====== ] 105/123 Installing : libcurl-devel-7.58.0-6. [======= ] 105/123 Installing : libcurl-devel-7.58.0-6. [======== ] 105/123 Installing : libcurl-devel-7.58.0-6. [========= ] 105/123 Installing : libcurl-devel-7.58.0-6. [========== ] 105/123 Installing : libcurl-devel-7.58.0-6. [=========== ] 105/123 Installing : libcurl-devel-7.58.0-6. [============ ] 105/123 Installing : libcurl-devel-7.58.0-6. [============= ] 105/123 Installing : libcurl-devel-7.58.0-6. [============== ] 105/123 Installing : libcurl-devel-7.58.0-6. [=============== ] 105/123 Installing : libcurl-devel-7.58.0-6. [================ ] 105/123 Installing : libcurl-devel-7.58.0-6. [================= ] 105/123 Installing : libcurl-devel-7.58.0-6. [================== ] 105/123 Installing : libcurl-devel-7.58.0-6. [=================== ] 105/123 Installing : libcurl-devel-7.58.0-6. [==================== ] 105/123 Installing : libcurl-devel-7.58.0-6. [===================== ] 105/123 Installing : libcurl-devel-7.58.0-6. [====================== ] 105/123 Installing : libcurl-devel-7.58.0-6. [======================= ] 105/123 Installing : libcurl-devel-7.58.0-6.fc27.riscv64 105/123 Installing : bash-completion-1:2.7-3 [ ] 106/123 Installing : bash-completion-1:2.7-3 [= ] 106/123 Installing : bash-completion-1:2.7-3 [== ] 106/123 Installing : bash-completion-1:2.7-3 [=== ] 106/123 Installing : bash-completion-1:2.7-3 [==== ] 106/123 Installing : bash-completion-1:2.7-3 [===== ] 106/123 Installing : bash-completion-1:2.7-3 [====== ] 106/123 Installing : bash-completion-1:2.7-3 [======= ] 106/123 Installing : bash-completion-1:2.7-3 [======== ] 106/123 Installing : bash-completion-1:2.7-3 [========= ] 106/123 Installing : bash-completion-1:2.7-3 [========== ] 106/123 Installing : bash-completion-1:2.7-3 [=========== ] 106/123 Installing : bash-completion-1:2.7-3 [============ ] 106/123 Installing : bash-completion-1:2.7-3 [============= ] 106/123 Installing : bash-completion-1:2.7-3 [============== ] 106/123 Installing : bash-completion-1:2.7-3 [=============== ] 106/123 Installing : bash-completion-1:2.7-3 [================ ] 106/123 Installing : bash-completion-1:2.7-3 [================= ] 106/123 Installing : bash-completion-1:2.7-3 [================== ] 106/123 Installing : bash-completion-1:2.7-3 [=================== ] 106/123 Installing : bash-completion-1:2.7-3 [==================== ] 106/123 Installing : bash-completion-1:2.7-3 [===================== ] 106/123 Installing : bash-completion-1:2.7-3 [====================== ] 106/123 Installing : bash-completion-1:2.7-3 [======================= ] 106/123 Installing : bash-completion-1:2.7-3.fc28.noarch 106/123 Installing : python2-devel-2.7.14-9. [ ] 107/123 Installing : python2-devel-2.7.14-9. [= ] 107/123 Installing : python2-devel-2.7.14-9. [== ] 107/123 Installing : python2-devel-2.7.14-9. [=== ] 107/123 Installing : python2-devel-2.7.14-9. [==== ] 107/123 Installing : python2-devel-2.7.14-9. [===== ] 107/123 Installing : python2-devel-2.7.14-9. [====== ] 107/123 Installing : python2-devel-2.7.14-9. [======= ] 107/123 Installing : python2-devel-2.7.14-9. [======== ] 107/123 Installing : python2-devel-2.7.14-9. [========= ] 107/123 Installing : python2-devel-2.7.14-9. [========== ] 107/123 Installing : python2-devel-2.7.14-9. [=========== ] 107/123 Installing : python2-devel-2.7.14-9. [============ ] 107/123 Installing : python2-devel-2.7.14-9. [============= ] 107/123 Installing : python2-devel-2.7.14-9. [============== ] 107/123 Installing : python2-devel-2.7.14-9. [=============== ] 107/123 Installing : python2-devel-2.7.14-9. [================ ] 107/123 Installing : python2-devel-2.7.14-9. [================= ] 107/123 Installing : python2-devel-2.7.14-9. [================== ] 107/123 Installing : python2-devel-2.7.14-9. [=================== ] 107/123 Installing : python2-devel-2.7.14-9. [==================== ] 107/123 Installing : python2-devel-2.7.14-9. [===================== ] 107/123 Installing : python2-devel-2.7.14-9. [====================== ] 107/123 Installing : python2-devel-2.7.14-9. [======================= ] 107/123 Installing : python2-devel-2.7.14-9.fc28.riscv64 107/123 Installing : python3-devel-3.6.4-14. [ ] 108/123 Installing : python3-devel-3.6.4-14. [= ] 108/123 Installing : python3-devel-3.6.4-14. [== ] 108/123 Installing : python3-devel-3.6.4-14. [=== ] 108/123 Installing : python3-devel-3.6.4-14. [==== ] 108/123 Installing : python3-devel-3.6.4-14. [===== ] 108/123 Installing : python3-devel-3.6.4-14. [====== ] 108/123 Installing : python3-devel-3.6.4-14. [======= ] 108/123 Installing : python3-devel-3.6.4-14. [======== ] 108/123 Installing : python3-devel-3.6.4-14. [========= ] 108/123 Installing : python3-devel-3.6.4-14. [========== ] 108/123 Installing : python3-devel-3.6.4-14. [=========== ] 108/123 Installing : python3-devel-3.6.4-14. [============ ] 108/123 Installing : python3-devel-3.6.4-14. [============= ] 108/123 Installing : python3-devel-3.6.4-14. [============== ] 108/123 Installing : python3-devel-3.6.4-14. [=============== ] 108/123 Installing : python3-devel-3.6.4-14. [================ ] 108/123 Installing : python3-devel-3.6.4-14. [================= ] 108/123 Installing : python3-devel-3.6.4-14. [================== ] 108/123 Installing : python3-devel-3.6.4-14. [=================== ] 108/123 Installing : python3-devel-3.6.4-14. [==================== ] 108/123 Installing : python3-devel-3.6.4-14. [===================== ] 108/123 Installing : python3-devel-3.6.4-14. [====================== ] 108/123 Installing : python3-devel-3.6.4-14. [======================= ] 108/123 Installing : python3-devel-3.6.4-14.0.fc28.riscv64 108/123 Installing : perl-generators-1.10-6. [ ] 109/123 Installing : perl-generators-1.10-6. [======= ] 109/123 Installing : perl-generators-1.10-6. [==================== ] 109/123 Installing : perl-generators-1.10-6. [====================== ] 109/123 Installing : perl-generators-1.10-6. [======================= ] 109/123 Installing : perl-generators-1.10-6.fc27.noarch 109/123 Installing : perl-CPAN-Meta-2.150010 [ ] 110/123 Installing : perl-CPAN-Meta-2.150010 [= ] 110/123 Installing : perl-CPAN-Meta-2.150010 [== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [=== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [==== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [===== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [====== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [========= ] 110/123 Installing : perl-CPAN-Meta-2.150010 [============ ] 110/123 Installing : perl-CPAN-Meta-2.150010 [============= ] 110/123 Installing : perl-CPAN-Meta-2.150010 [============== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [=============== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [================ ] 110/123 Installing : perl-CPAN-Meta-2.150010 [=================== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [====================== ] 110/123 Installing : perl-CPAN-Meta-2.150010 [======================= ] 110/123 Installing : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarc 110/123 Installing : perl-Digest-MD5-2.55-40 [ ] 111/123 Installing : perl-Digest-MD5-2.55-40 [== ] 111/123 Installing : perl-Digest-MD5-2.55-40 [======== ] 111/123 Installing : perl-Digest-MD5-2.55-40 [=============== ] 111/123 Installing : perl-Digest-MD5-2.55-40 [===================== ] 111/123 Installing : perl-Digest-MD5-2.55-40 [====================== ] 111/123 Installing : perl-Digest-MD5-2.55-40 [======================= ] 111/123 Installing : perl-Digest-MD5-2.55-408.fc27.0.riscv64.riscv64 111/123 Installing : gettext-0.19.8.1-14.fc2 [ ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [= ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [=== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [==== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [===== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [====== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [======= ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [======== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [========= ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [========== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [=========== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [============ ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [============= ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [============== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [=============== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [================ ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [================= ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [================== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [=================== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [==================== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [===================== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [====================== ] 112/123 Installing : gettext-0.19.8.1-14.fc2 [======================= ] 112/123 Installing : gettext-0.19.8.1-14.fc28.riscv64 112/123 Running scriptlet: gettext-0.19.8.1-14.fc28.riscv64 112/123 install-info: No such file or directory for /usr/share/info/gettext.info.gz Installing : perl-Memoize-1.03-408.f [ ] 113/123 Installing : perl-Memoize-1.03-408.f [=== ] 113/123 Installing : perl-Memoize-1.03-408.f [===== ] 113/123 Installing : perl-Memoize-1.03-408.f [====== ] 113/123 Installing : perl-Memoize-1.03-408.f [======= ] 113/123 Installing : perl-Memoize-1.03-408.f [======== ] 113/123 Installing : perl-Memoize-1.03-408.f [================= ] 113/123 Installing : perl-Memoize-1.03-408.f [================== ] 113/123 Installing : perl-Memoize-1.03-408.f [===================== ] 113/123 Installing : perl-Memoize-1.03-408.f [====================== ] 113/123 Installing : perl-Memoize-1.03-408.f [======================= ] 113/123 Installing : perl-Memoize-1.03-408.fc28.1.riscv64.noarch 113/123 Installing : perl-Test-Simple-1:1.30 [ ] 114/123 Installing : perl-Test-Simple-1:1.30 [= ] 114/123 Installing : perl-Test-Simple-1:1.30 [== ] 114/123 Installing : perl-Test-Simple-1:1.30 [=== ] 114/123 Installing : perl-Test-Simple-1:1.30 [==== ] 114/123 Installing : perl-Test-Simple-1:1.30 [===== ] 114/123 Installing : perl-Test-Simple-1:1.30 [====== ] 114/123 Installing : perl-Test-Simple-1:1.30 [======= ] 114/123 Installing : perl-Test-Simple-1:1.30 [======== ] 114/123 Installing : perl-Test-Simple-1:1.30 [========= ] 114/123 Installing : perl-Test-Simple-1:1.30 [========== ] 114/123 Installing : perl-Test-Simple-1:1.30 [=========== ] 114/123 Installing : perl-Test-Simple-1:1.30 [============ ] 114/123 Installing : perl-Test-Simple-1:1.30 [============= ] 114/123 Installing : perl-Test-Simple-1:1.30 [============== ] 114/123 Installing : perl-Test-Simple-1:1.30 [=============== ] 114/123 Installing : perl-Test-Simple-1:1.30 [================ ] 114/123 Installing : perl-Test-Simple-1:1.30 [================= ] 114/123 Installing : perl-Test-Simple-1:1.30 [================== ] 114/123 Installing : perl-Test-Simple-1:1.30 [=================== ] 114/123 Installing : perl-Test-Simple-1:1.30 [==================== ] 114/123 Installing : perl-Test-Simple-1:1.30 [===================== ] 114/123 Installing : perl-Test-Simple-1:1.30 [====================== ] 114/123 Installing : perl-Test-Simple-1:1.30 [======================= ] 114/123 Installing : perl-Test-Simple-1:1.302103-1.fc27.noarch 114/123 Installing : perl-Test-1.30-408.fc28 [ ] 115/123 Installing : perl-Test-1.30-408.fc28 [===== ] 115/123 Installing : perl-Test-1.30-408.fc28 [======================= ] 115/123 Installing : perl-Test-1.30-408.fc28.1.riscv64.noarch 115/123 Installing : perl-Error-1:0.17025-1. [ ] 116/123 Installing : perl-Error-1:0.17025-1. [=== ] 116/123 Installing : perl-Error-1:0.17025-1. [==== ] 116/123 Installing : perl-Error-1:0.17025-1. [===== ] 116/123 Installing : perl-Error-1:0.17025-1. [============ ] 116/123 Installing : perl-Error-1:0.17025-1. [============== ] 116/123 Installing : perl-Error-1:0.17025-1. [=============== ] 116/123 Installing : perl-Error-1:0.17025-1. [======================= ] 116/123 Installing : perl-Error-1:0.17025-1.fc27.noarch 116/123 Installing : perl-IO-Tty-1.12-10.fc2 [ ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [= ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [== ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [=== ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [======= ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [============ ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [================ ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [==================== ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [====================== ] 117/123 Installing : perl-IO-Tty-1.12-10.fc2 [======================= ] 117/123 Installing : perl-IO-Tty-1.12-10.fc28.riscv64 117/123 Installing : perl-Time-HiRes-1.9753- [ ] 118/123 Installing : perl-Time-HiRes-1.9753- [== ] 118/123 Installing : perl-Time-HiRes-1.9753- [====== ] 118/123 Installing : perl-Time-HiRes-1.9753- [========== ] 118/123 Installing : perl-Time-HiRes-1.9753- [============= ] 118/123 Installing : perl-Time-HiRes-1.9753- [================= ] 118/123 Installing : perl-Time-HiRes-1.9753- [===================== ] 118/123 Installing : perl-Time-HiRes-1.9753- [====================== ] 118/123 Installing : perl-Time-HiRes-1.9753- [======================= ] 118/123 Installing : perl-Time-HiRes-1.9753-1.fc28.riscv64 118/123 Installing : tcl-1:8.6.7-2.fc28.risc [ ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [=== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [==== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [===== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [====== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [======= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [======== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [========= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [========== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [=========== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [============ ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [============= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [============== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [=============== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [================ ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [================= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [================== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [=================== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [==================== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [===================== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [====================== ] 119/123 Installing : tcl-1:8.6.7-2.fc28.risc [======================= ] 119/123 Installing : tcl-1:8.6.7-2.fc28.riscv64 119/123 Running scriptlet: tcl-1:8.6.7-2.fc28.riscv64 119/123 Installing : make-1:4.2.1-6.fc27.ris [ ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [= ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [=== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [==== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [===== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [====== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [======= ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [======== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [========= ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [========== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [=========== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [============ ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [============= ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [============== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [=============== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [================ ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [================= ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [================== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [=================== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [==================== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [===================== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [====================== ] 120/123 Installing : make-1:4.2.1-6.fc27.ris [======================= ] 120/123 Installing : make-1:4.2.1-6.fc27.riscv64 120/123 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 120/123 Installing : acl-2.2.52-18.fc28.risc [ ] 121/123 Installing : acl-2.2.52-18.fc28.risc [== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [==== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [====== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [======= ] 121/123 Installing : acl-2.2.52-18.fc28.risc [========== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [============ ] 121/123 Installing : acl-2.2.52-18.fc28.risc [============== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [================ ] 121/123 Installing : acl-2.2.52-18.fc28.risc [================= ] 121/123 Installing : acl-2.2.52-18.fc28.risc [=================== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [==================== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [===================== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [====================== ] 121/123 Installing : acl-2.2.52-18.fc28.risc [======================= ] 121/123 Installing : acl-2.2.52-18.fc28.riscv64 121/123 Installing : time-1.8-3.0.riscv64.fc [ ] 122/123 Installing : time-1.8-3.0.riscv64.fc [======= ] 122/123 Installing : time-1.8-3.0.riscv64.fc [============= ] 122/123 Installing : time-1.8-3.0.riscv64.fc [=============== ] 122/123 Installing : time-1.8-3.0.riscv64.fc [================ ] 122/123 Installing : time-1.8-3.0.riscv64.fc [======================= ] 122/123 Installing : time-1.8-3.0.riscv64.fc28.riscv64 122/123 Running scriptlet: time-1.8-3.0.riscv64.fc28.riscv64 122/123 Installing : gnupg-1.4.22-3.fc27.ris [ ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [= ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [=== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [==== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [===== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [====== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [======= ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [======== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [========= ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [========== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [=========== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [============ ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [============= ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [============== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [=============== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [================ ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [================= ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [================== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [=================== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [==================== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [===================== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [====================== ] 123/123 Installing : gnupg-1.4.22-3.fc27.ris [======================= ] 123/123 Installing : gnupg-1.4.22-3.fc27.riscv64 123/123 Running scriptlet: gnupg-1.4.22-3.fc27.riscv64 123/123 Verifying : gettext-0.19.8.1-14.fc28.riscv64 1/123 Verifying : gnupg-1.4.22-3.fc27.riscv64 2/123 Verifying : perl-CGI-4.37-1.fc27.noarch 3/123 Verifying : perl-Error-1:0.17025-1.fc27.noarch 4/123 Verifying : perl-HTTP-Date-6.02-17.fc27.noarch 5/123 Verifying : perl-IO-Tty-1.12-10.fc28.riscv64 6/123 Verifying : perl-MailTools-2.19-1.fc27.noarch 7/123 Verifying : perl-generators-1.10-6.fc27.noarch 8/123 Verifying : time-1.8-3.0.riscv64.fc28.riscv64 9/123 Verifying : openssl-devel-1:1.1.0g-2.fc28.riscv64 10/123 Verifying : gettext-libs-0.19.8.1-14.fc28.riscv64 11/123 Verifying : perl-HTML-Parser-3.72-10.fc28.0.riscv64.riscv64 12/123 Verifying : perl-TimeDate-1:2.30-12.fc27.noarch 13/123 Verifying : perl-Net-SMTP-SSL-1.04-4.fc27.noarch 14/123 Verifying : perl-Fedora-VSP-0.001-8.fc27.noarch 15/123 Verifying : perl-HTML-Tagset-3.20-31.fc27.noarch 16/123 Verifying : perl-HTTP-Message-6.14-1.fc27.noarch 17/123 Verifying : perl-URI-1.72-1.fc27.noarch 18/123 Verifying : perl-IO-Socket-SSL-2.051-1.fc27.noarch 19/123 Verifying : perl-Encode-Locale-1.05-8.fc27.noarch 20/123 Verifying : perl-IO-HTML-1.001-9.fc27.noarch 21/123 Verifying : perl-LWP-MediaTypes-6.02-13.fc27.noarch 22/123 Verifying : perl-Net-SSLeay-1.81-4.fc28.riscv64 23/123 Verifying : mailcap-2.1.48-2.fc27.noarch 24/123 Verifying : acl-2.2.52-18.fc28.riscv64 25/123 Verifying : expat-devel-2.2.5-1.fc27.riscv64 26/123 Verifying : libcurl-devel-7.58.0-6.fc27.riscv64 27/123 Verifying : make-1:4.2.1-6.fc27.riscv64 28/123 Verifying : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 29/123 Verifying : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 30/123 Verifying : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 31/123 Verifying : perl-Test-Harness-1:3.39-4.fc27.noarch 32/123 Verifying : perl-Digest-MD5-2.55-408.fc27.0.riscv64.riscv64 33/123 Verifying : perl-ExtUtils-MakeMaker-1:7.30-2.fc27.noarch 34/123 Verifying : perl-Memoize-1.03-408.fc28.1.riscv64.noarch 35/123 Verifying : perl-Test-1.30-408.fc28.1.riscv64.noarch 36/123 Verifying : perl-Test-Simple-1:1.302103-1.fc27.noarch 37/123 Verifying : perl-Time-HiRes-1.9753-1.fc28.riscv64 38/123 Verifying : bash-completion-1:2.7-3.fc28.noarch 39/123 Verifying : python2-devel-2.7.14-9.fc28.riscv64 40/123 Verifying : python2-2.7.14-9.fc28.riscv64 41/123 Verifying : python2-libs-2.7.14-9.fc28.riscv64 42/123 Verifying : python3-devel-3.6.4-14.0.fc28.riscv64 43/123 Verifying : tcl-1:8.6.7-2.fc28.riscv64 44/123 Verifying : zlib-devel-1.2.11-4.fc28.riscv64 45/123 Verifying : openssl-1:1.1.0g-2.fc28.riscv64 46/123 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 47/123 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 48/123 Verifying : pkgconf-1.4.1-1.fc27.riscv64 49/123 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 50/123 Verifying : python-rpm-macros-3-26.fc28.noarch 51/123 Verifying : python3-rpm-generators-5-1.fc28.noarch 52/123 Verifying : python3-setuptools-38.4.0-3.fc28.noarch 53/123 Verifying : python3-rpm-macros-3-26.fc28.noarch 54/123 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 55/123 Verifying : nim-srpm-macros-1-1.fc28.noarch 56/123 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 57/123 Verifying : openblas-srpm-macros-2-2.fc27.noarch 58/123 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 59/123 Verifying : rust-srpm-macros-5-1.fc28.noarch 60/123 Verifying : file-5.32-3.fc28.riscv64 61/123 Verifying : python2-rpm-macros-3-26.fc28.noarch 62/123 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 63/123 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 64/123 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 65/123 Verifying : perl-libnet-3.11-1.fc27.noarch 66/123 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 67/123 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv6 68/123 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 69/123 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 70/123 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 71/123 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 72/123 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.ris 73/123 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 74/123 Verifying : perl-devel-4:5.26.1-408.fc28.1.riscv64.riscv64 75/123 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 76/123 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 77/123 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noar 78/123 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noar 79/123 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 80/123 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 81/123 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 82/123 Verifying : perl-File-Path-2.15-1.fc27.noarch 83/123 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 84/123 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noa 85/123 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 86/123 Verifying : perl-Digest-1.17-408.fc27.0.riscv64.noarch 87/123 Verifying : libcroco-0.6.12-4.fc28.riscv64 88/123 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 89/123 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 90/123 Verifying : gnat-srpm-macros-4-5.fc28.noarch 91/123 Verifying : go-srpm-macros-2-11.fc28.noarch 92/123 Verifying : perl-srpm-macros-1-26.fc28.noarch 93/123 Verifying : python-srpm-macros-3-26.fc28.noarch 94/123 Verifying : dwz-0.12-5.fc28.riscv64 95/123 Verifying : zip-3.0-20.fc28.riscv64 96/123 Verifying : perl-IO-Socket-IP-0.39-4.fc27.noarch 97/123 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 98/123 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 99/123 Verifying : perl-IO-Compress-2.074-408.fc27.0.riscv64.noarch 100/123 Verifying : perl-Compress-Raw-Zlib-2.076-1.fc28.riscv64 101/123 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 102/123 Verifying : perl-ExtUtils-Command-1:7.30-2.fc27.noarch 103/123 Verifying : perl-ExtUtils-Install-2.14-3.fc27.noarch 104/123 Verifying : perl-ExtUtils-Manifest-1.70-408.fc27.0.riscv64.n 105/123 Verifying : perl-ExtUtils-ParseXS-1:3.35-1.fc27.noarch 106/123 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 107/123 Verifying : perl-version-6:0.99.18-5.fc28.riscv64 108/123 Verifying : unzip-6.0-36.fc28.riscv64 109/123 Verifying : perl-threads-1:2.21-1.fc27.riscv64 110/123 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64 111/123 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.r 112/123 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 113/123 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 114/123 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 115/123 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarc 116/123 Verifying : perl-Compress-Raw-Bzip2-2.074-408.fc27.0.riscv64 117/123 Verifying : perl-CPAN-Meta-2.150010-408.fc27.0.riscv64.noarc 118/123 Verifying : perl-CPAN-Meta-Requirements-2.140-408.fc27.0.ris 119/123 Verifying : perl-CPAN-Meta-YAML-0.018-408.fc27.0.riscv64.noa 120/123 Verifying : perl-JSON-PP-1:2.94-4.fc27.noarch 121/123 Verifying : perl-Math-BigInt-1:1.9998.11-4.fc27.noarch 122/123 Verifying : perl-Math-Complex-1.59-408.fc28.1.riscv64.noarch 123/123 Installed: acl.riscv64 2.2.52-18.fc28 bash-completion.noarch 1:2.7-3.fc28 expat-devel.riscv64 2.2.5-1.fc27 gettext.riscv64 0.19.8.1-14.fc28 gnupg.riscv64 1.4.22-3.fc27 libcurl-devel.riscv64 7.58.0-6.fc27 make.riscv64 1:4.2.1-6.fc27 openssl-devel.riscv64 1:1.1.0g-2.fc28 pcre2-devel.riscv64 10.31-0.3.RC1.fc28.1 perl-CGI.noarch 4.37-1.fc27 perl-Digest-MD5.riscv64 2.55-408.fc27.0.riscv64 perl-Error.noarch 1:0.17025-1.fc27 perl-ExtUtils-MakeMaker.noarch 1:7.30-2.fc27 perl-HTTP-Date.noarch 6.02-17.fc27 perl-IO-Tty.riscv64 1.12-10.fc28 perl-MailTools.noarch 2.19-1.fc27 perl-Memoize.noarch 1.03-408.fc28.1.riscv64 perl-Test.noarch 1.30-408.fc28.1.riscv64 perl-Test-Harness.noarch 1:3.39-4.fc27 perl-Test-Simple.noarch 1:1.302103-1.fc27 perl-Time-HiRes.riscv64 1.9753-1.fc28 perl-generators.noarch 1.10-6.fc27 python2-devel.riscv64 2.7.14-9.fc28 python3-devel.riscv64 3.6.4-14.0.fc28 tcl.riscv64 1:8.6.7-2.fc28 time.riscv64 1.8-3.0.riscv64.fc28 zlib-devel.riscv64 1.2.11-4.fc28 perl-CPAN-Meta.noarch 2.150010-408.fc27.0.riscv64 perl-CPAN-Meta-Requirements.noarch 2.140-408.fc27.0.riscv64 dwz.riscv64 0.12-5.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 gettext-libs.riscv64 0.19.8.1-14.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 libcroco.riscv64 0.6.12-4.fc28 libpkgconf.riscv64 1.4.1-1.fc27 mailcap.noarch 2.1.48-2.fc27 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 openssl.riscv64 1:1.1.0g-2.fc28 pcre2-utf16.riscv64 10.31-0.3.RC1.fc28.1 pcre2-utf32.riscv64 10.31-0.3.RC1.fc28.1 perl-CPAN-Meta-YAML.noarch 0.018-408.fc27.0.riscv64 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Compress-Raw-Bzip2.riscv64 2.074-408.fc27.0.riscv64 perl-Compress-Raw-Zlib.riscv64 2.076-1.fc28 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Digest.noarch 1.17-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Encode-Locale.noarch 1.05-8.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-ExtUtils-Command.noarch 1:7.30-2.fc27 perl-ExtUtils-Install.noarch 2.14-3.fc27 perl-ExtUtils-Manifest.noarch 1.70-408.fc27.0.riscv64 perl-ExtUtils-ParseXS.noarch 1:3.35-1.fc27 perl-Fedora-VSP.noarch 0.001-8.fc27 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTML-Parser.riscv64 3.72-10.fc28.0.riscv64 perl-HTML-Tagset.noarch 3.20-31.fc27 perl-HTTP-Message.noarch 6.14-1.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-IO-Compress.noarch 2.074-408.fc27.0.riscv64 perl-IO-HTML.noarch 1.001-9.fc27 perl-IO-Socket-IP.noarch 0.39-4.fc27 perl-IO-Socket-SSL.noarch 2.051-1.fc27 perl-JSON-PP.noarch 1:2.94-4.fc27 perl-LWP-MediaTypes.noarch 6.02-13.fc27 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-Math-BigInt.noarch 1:1.9998.11-4.fc27 perl-Math-Complex.noarch 1.59-408.fc28.1.riscv64 perl-Net-SMTP-SSL.noarch 1.04-4.fc27 perl-Net-SSLeay.riscv64 1.81-4.fc28 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-TimeDate.noarch 1:2.30-12.fc27 perl-URI.noarch 1.72-1.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-devel.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libnet.noarch 3.11-1.fc27 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macroserial8250: too much work for irq11 s.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-srpm-macros.noarch 1-26.fc28 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 perl-version.riscv64 6:0.99.18-5.fc28 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 python-rpm-macros.noarch 3-26.fc28 python-srpm-macros.noarch 3-26.fc28 python2.riscv64 2.7.14-9.fc28 python2-libs.riscv64 2.7.14-9.fc28 python2-rpm-macros.noarch 3-26.fc28 python3-rpm-generators.noarch 5-1.fc28 python3-rpm-macros.noarch 3-26.fc28 python3-setuptools.noarch 38.4.0-3.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rust-srpm-macros.noarch 5-1.fc28 unzip.riscv64 6.0-36.fc28 zip.riscv64 3.0-20.fc28 Complete! + dnf -y update --best Last metadata expiration check: 0:08:52 ago on Wed Feb 21 14:42:36 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:09:11 ago on Wed Feb 21 14:42:36 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group diffutils gawk cpio shadow-utils bash tar coreutils redhat-rpm-config util-linux patch bzip2 rpm-build xz make grep findutils info sed which unzip fedora-release gzip ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k patch riscv64 2.7.5-6.fc27 local 270 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k tar riscv64 2:1.29-7.fc27 local 805 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M elfutils riscv64 0.170-4.fc28 local 791 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 10 Packages Total download size: 11 M Installed size: 46 M Downloading Packages: (1/10): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA (1/10): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 912 kB/s | 235 kB 00:00 (2-3/10): diffutils- 6% [= ] 2.2 MB/s | 715 kB 00:04 ETA (2-4/10): tar-1.29-7 14% [==- ] 2.2 MB/s | 1.6 MB 00:04 ETA (2/10): diffutils-3.6-3.fc28.riscv64.rpm 814 kB/s | 577 kB 00:00 (3-4/10): zstd-1.3.3 15% [=== ] 2.2 MB/s | 1.7 MB 00:04 ETA (3/10): which-2.21-4.fc28.riscv64.rpm 726 kB/s | 65 kB 00:00 (4-5/10): zstd-1.3.3 17% [===- ] 2.2 MB/s | 1.9 MB 00:04 ETA (4-6/10): zstd-1.3.3 19% [===- ] 2.1 MB/s | 2.2 MB 00:04 ETA (4/10): tar-1.29-7.fc27.riscv64.rpm 607 kB/s | 805 kB 00:01 (5-6/10): zstd-1.3.3 21% [==== ] 2.1 MB/s | 2.3 MB 00:04 ETA (5/10): patch-2.7.5-6.fc27.riscv64.rpm 665 kB/s | 270 kB 00:00 (6-7/10): zstd-1.3.3 24% [====- ] 2.1 MB/s | 2.7 MB 00:03 ETA (6/10): xz-5.2.3-5.fc28.riscv64.rpm 714 kB/s | 212 kB 00:00 (7-8/10): zstd-1.3.3 27% [===== ] 2.1 MB/s | 3.0 MB 00:03 ETA (7/10): bzip2-1.0.6-24.fc28.riscv64.rpm 571 kB/s | 81 kB 00:00 (8/10): zstd-1.3.3-1 27% [===== ] 2.1 MB/s | 3.0 MB 00:03 ETA (8-10/10): binutils- 34% [======- ] 2.1 MB/s | 3.8 MB 00:03 ETA (8/10): zstd-1.3.3-1.fc27.riscv64.rpm 621 kB/s | 1.1 MB 00:01 (9-10/10): binutils- 36% [======= ] 2.1 MB/s | 4.0 MB 00:03 ETA (9/10): elfutils-0.170-4.fc28.riscv64.rpm 896 kB/s | 791 kB 00:00 (10/10): binutils-2. 44% [========- ] 2.1 MB/s | 4.9 MB 00:02 ETA (10/10): binutils-2. 52% [==========- ] 2.1 MB/s | 5.8 MB 00:02 ETA (10/10): binutils-2. 60% [============ ] 2.2 MB/s | 6.7 MB 00:01 ETA (10/10): binutils-2. 68% [=============- ] 2.2 MB/s | 7.5 MB 00:01 ETA (10/10): binutils-2. 76% [=============== ] 2.3 MB/s | 8.4 MB 00:01 ETA (10/10): binutils-2. 84% [================- ] 2.3 MB/s | 9.3 MB 00:00 ETA (10/10): binutils-2. 92% [==================- ] 2.3 MB/s | 10 MB 00:00 ETA (10/10): binutils-2.30-1.fc28.riscv64.rpm 1.8 MB/s | 6.9 MB 00:03 -------------------------------------------------------------------------------- Total 2.0 MB/s | 11 MB 00:05 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [===== ] 1/1 Preparing : [========== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [============================================= ] 1/1 Preparing : 1/1 Installing : binutils-2.30-1.fc28.ris [ ] 1/10 Installing : binutils-2.30-1.fc28.ris [= ] 1/10 Installing : binutils-2.30-1.fc28.ris [== ] 1/10 Installing : binutils-2.30-1.fc28.ris [=== ] 1/10 Installing : binutils-2.30-1.fc28.ris [==== ] 1/10 Installing : binutils-2.30-1.fc28.ris [===== ] 1/10 Installing : binutils-2.30-1.fc28.ris [====== ] 1/10 Installing : binutils-2.30-1.fc28.ris [======= ] 1/10 Installing : binutils-2.30-1.fc28.ris [======== ] 1/10 Installing : binutils-2.30-1.fc28.ris [========= ] 1/10 Installing : binutils-2.30-1.fc28.ris [========== ] 1/10 Installing : binutils-2.30-1.fc28.ris [=========== ] 1/10 Installing : binutils-2.30-1.fc28.ris [============ ] 1/10 Installing : binutils-2.30-1.fc28.ris [============= ] 1/10 Installing : binutils-2.30-1.fc28.ris [============== ] 1/10 Installing : binutils-2.30-1.fc28.ris [=============== ] 1/10 Installing : binutils-2.30-1.fc28.ris [================ ] 1/10 Installing : binutils-2.30-1.fc28.ris [================= ] 1/10 Installing : binutils-2.30-1.fc28.ris [================== ] 1/10 Installing : binutils-2.30-1.fc28.ris [=================== ] 1/10 Installing : binutils-2.30-1.fc28.ris [==================== ] 1/10 Installing : binutils-2.30-1.fc28.ris [===================== ] 1/10 Installing : binutils-2.30-1.fc28.ris [====================== ] 1/10 Installing : binutils-2.30-1.fc28.ris [======================= ] 1/10 Installing : binutils-2.30-1.fc28.ris [======================== ] 1/10 Installing : binutils-2.30-1.fc28.riscv64 1/10 Running scriptlet: binutils-2.30-1.fc28.riscv64 1/10 Installing : elfutils-0.170-4.fc28.ri [ ] 2/10 Installing : elfutils-0.170-4.fc28.ri [= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [=== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [==== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [===== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [====== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [======= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [======== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [========= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [========== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [=========== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [============ ] 2/10 Installing : elfutils-0.170-4.fc28.ri [============= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [============== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [=============== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [================ ] 2/10 Installing : elfutils-0.170-4.fc28.ri [================= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [================== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [=================== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [==================== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [===================== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [====================== ] 2/10 Installing : elfutils-0.170-4.fc28.ri [======================= ] 2/10 Installing : elfutils-0.170-4.fc28.ri [======================== ] 2/10 Installing : elfutils-0.170-4.fc28.riscv64 2/10 Installing : bzip2-1.0.6-24.fc28.risc [ ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 3/10 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 3/10 Installing : bzip2-1.0.6-24.fc28.riscv64 3/10 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 4/10 Installing : xz-5.2.3-5.fc28.riscv64 4/10 Installing : patch-2.7.5-6.fc27.riscv [ ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [=== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [==== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [===== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [====== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [======= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [======== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [========= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [========== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [============ ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [============= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [============== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [================ ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [================= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 5/10 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 5/10 Installing : patch-2.7.5-6.fc27.riscv64 5/10 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 6/10 Installing : zstd-1.3.3-1.fc27.riscv64 6/10 Installing : diffutils-3.6-3.fc28.ris [ ] 7/10 Installing : diffutils-3.6-3.fc28.ris [= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [=== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [==== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [===== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [====== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [======= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [======== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [========= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [========== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [=========== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [============ ] 7/10 Installing : diffutils-3.6-3.fc28.ris [============= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [============== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [=============== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [================ ] 7/10 Installing : diffutils-3.6-3.fc28.ris [================= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [================== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [=================== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [==================== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [===================== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [====================== ] 7/10 Installing : diffutils-3.6-3.fc28.ris [======================= ] 7/10 Installing : diffutils-3.6-3.fc28.ris [======================== ] 7/10 Installing : diffutils-3.6-3.fc28.riscv64 7/10 Running scriptlet: diffutils-3.6-3.fc28.riscv64 7/10 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 8/10 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 8/10 Installing : tar-2:1.29-7.fc27.riscv64 8/10 Running scriptlet: tar-2:1.29-7.fc27.riscv64 8/10 Installing : rpm-build-4.14.1-6.fc28. [ ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [= ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [=== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [==== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [===== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [====== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [======= ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [======== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [========= ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [============ ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [============== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [================ ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [================= ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 9/10 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 9/10 Installing : which-2.21-4.fc28.riscv6 [ ] 10/10 Installing : which-2.21-4.fc28.riscv6 [===== ] 10/10 Installing : which-2.21-4.fc28.riscv6 [=========== ] 10/10 Installing : which-2.21-4.fc28.riscv6 [=============== ] 10/10 Installing : which-2.21-4.fc28.riscv6 [================ ] 10/10 Installing : which-2.21-4.fc28.riscv6 [================= ] 10/10 Installing : which-2.21-4.fc28.riscv6 [================== ] 10/10 Installing : which-2.21-4.fc28.riscv6 [======================== ] 10/10 Installing : which-2.21-4.fc28.riscv64 10/10 Running scriptlet: which-2.21-4.fc28.riscv64 10/10 Verifying : tar-2:1.29-7.fc27.riscv64 1/10 Verifying : diffutils-3.6-3.fc28.riscv64 2/10 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 3/10 Verifying : zstd-1.3.3-1.fc27.riscv64 4/10 Verifying : which-2.21-4.fc28.riscv64 5/10 Verifying : patch-2.7.5-6.fc27.riscv64 6/10 Verifying : xz-5.2.3-5.fc28.riscv64 7/10 Verifying : bzip2-1.0.6-24.fc28.riscv64 8/10 Verifying : elfutils-0.170-4.fc28.riscv64 9/10 Verifying : binutils-2.30-1.fc28.riscv64 10/10 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 patch.riscv64 2.7.5-6.fc27 rpm-build.riscv64 4.14.1-6.fc28.1 tar.riscv64 2:1.29-7.fc27 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 elfutils.riscv64 0.170-4.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:10:47 ago on Wed Feb 21 14:42:36 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 2.5 M Installed size: 7.1 M Downloading Packages: (1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 533 kB/s | 15 kB 00:00 (2-3/4): glibc-heade 1% [ ] 624 kB/s | 46 kB 00:04 ETA (2-4/4): glibc-devel 36% [======= ] 762 kB/s | 926 kB 00:02 ETA (2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 818 kB/s | 442 kB 00:00 (3-4/4): glibc-devel 52% [========== ] 815 kB/s | 1.3 MB 00:01 ETA (3-4/4): glibc-devel 88% [=================- ] 952 kB/s | 2.2 MB 00:00 ETA (3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 956 kB/s | 1.0 MB 00:01 (4/4): kernel-header 95% [=================== ] 954 kB/s | 2.4 MB 00:00 ETA (4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 979 kB/s | 1.1 MB 00:01 -------------------------------------------------------------------------------- Total 1.9 MB/s | 2.5 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [============ ] 1/1 Preparing : [========================= ] 1/1 Preparing : [====================================== ] 1/1 Preparing : 1/1 Installing : kernel-headers-4.15.0-1.f [ ] 1/4 Installing : kernel-headers-4.15.0-1.f [= ] 1/4 Installing : kernel-headers-4.15.0-1.f [== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========= ] 1/4 Installing : kernel-headers-4.15.0-1.f [========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4 Installing : kernel-headers-4.15.0-1.f [============ ] 1/4 Installing : kernel-headers-4.15.0-1.f [============= ] 1/4 Installing : kernel-headers-4.15.0-1.f [============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4 Installing : kernel-headers-4.15.0-1.f [================ ] 1/4 Installing : kernel-headers-4.15.0-1.f [================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4 Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4 Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4 Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : glibc-headers-2.27-4.fc28 [ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4 Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4 Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4 Installing : glibc-headers-2.27-4.fc28.riscv64 2/4 Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4 Installing : glibc-devel-2.27-4.fc28.riscv64 4/4 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4 Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off