[ 0.0] Examining the guest ... [ 17.8] Setting a random seed [ 17.9] Installing firstboot script: /mnt/tmp/riscv64/tmp/ghc-SHA.Sx9po8/ghc-SHA-boot.sh [ 17.9] Copying: /mnt/tmp/riscv64/tmp/ghc-SHA.Sx9po8/ghc-SHA-1.6.4.2-5.fc27.src.rpm to /var/tmp [ 18.0] Copying: /mnt/tmp/riscv64/tmp/ghc-SHA.Sx9po8/local.repo to /etc/yum.repos.d/ [ 18.1] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded virtio_blk virtio0: [vda] 41943040 512-byte logical blocks (21.5 GB/20.0 GiB) libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice system-getty.slice. [ OK ] Reached target Remote File Systems. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. Mounting POSIX Message Queue File System... Starting Apply Kernel Variables... [ OK ] Created slice system-serial\x2dgetty.slice. EXT4-fs (vda): re-mounted. Opts: (null) systemd[1]: Starting Journal Service... Starting Journal Service... systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Reached target Slices. [ OK ] Reached target Slices. systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Temporary Directory (/tmp). Starting Rebuild Hardware Database... Starting Configure read-only root support... Starting Create System Users... [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... systemd-journald[85]: Received request to flush runtime journal from PID 1 [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Configure read-only root support. Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [* ] (1 of 3) A start job is running for dev-ttyS0.device (19s / 1min 32s) [** ] (1 of 3) A start job is running for dev-ttyS0.device (19s / 1min 32s) [*** ] (1 of 3) A start job is running for dev-ttyS0.device (20s / 1min 32s) [ OK ] Started udev Coldplug all Devices. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Kernel Device Manager... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. Starting Network Service... [ OK ] Reached target System Initialization. [ OK ] Started dnf makecache timer. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH rsa Server Key Generation... Starting OpenSSH ecdsa Server Key Generation... Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting OpenSSH ed25519 Server Key Generation... [ OK ] Started Network Service. [ OK ] Found device /dev/ttyS0. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started OpenSSH rsa Server Key Generation. [ *** ] A start job is running for Login Service (44s / 1min 54s) [ *** ] A start job is running for Login Service (46s / 1min 54s) [ ***] A start job is running for Login Service (47s / 1min 54s) [ **] A start job is running for Login Service (48s / 1min 54s) [ *] A start job is running for Login Service (48s / 1min 54s) [ **] A start job is running for Login Service (49s / 1min 54s) [ ***] A start job is running for Login Service (50s / 1min 54s) [ *** ] A start job is running for Login Service (50s / 1min 54s) [ *** ] A start job is running for Login Service (51s / 1min 54s) [*** ] A start job is running for Login Service (51s / 1min 54s) [** ] A start job is running for Login Service (52s / 1min 54s) [* ] A start job is running for Login Service (53s / 1min 54s) [** ] A start job is running for Login Service (53s / 1min 54s) [*** ] A start job is running for Login Service (54s / 1min 54s) [ *** ] A start job is running for Login Service (54s / 1min 54s) [ *** ] A start job is running for Login Service (55s / 1min 54s) [ ***] A start job is running for Login Service (56s / 1min 54s) [ **] A start job is running for Login Service (56s / 1min 54s) [ *] A start job is running for Login Service (57s / 1min 54s) [ **] A start job is running for Login Service (57s / 1min 54s) [ ***] A start job is running for Login Service (58s / 1min 54s) [ *** ] A start job is running for Login Service (59s / 1min 54s) [ *** ] A start job is running for Login Service (59s / 1min 54s) [*** ] A start job is running for Login Service (1min / 1min 54s) [** ] A start job is running for Login Service (1min / 1min 54s) [* ] A start job is running for Login Service (1min 1s / 1min 54s) [** ] A start job is running for Login Service (1min 2s / 1min 54s) [*** ] A start job is running for Login Service (1min 2s / 1min 54s) [ *** ] A start job is running for Login Service (1min 3s / 1min 54s) [ *** ] A start job is running for Login Service (1min 3s / 1min 54s) [ ***] A start job is running for Login Service (1min 4s / 1min 54s) [ **] A start job is running for Login Service (1min 5s / 1min 54s) [ *] A start job is running for Login Service (1min 5s / 1min 54s) [ **] A start job is running for Login Service (1min 6s / 1min 54s) [ ***] A start job is running for Login Service (1min 7s / 1min 54s) [ *** ] A start job is running for Login Service (1min 7s / 1min 54s) [ *** ] A start job is running for Login Service (1min 8s / 1min 54s) [*** ] A start job is running for Login Service (1min 8s / 1min 54s) [** ] A start job is running for Login Service (1min 9s / 1min 54s) [* ] A start job is running for Login Service (1min 9s / 1min 54s) [** ] A start job is running for Login Service (1min 10s / 1min 54s) [*** ] random: crng init done A start job is running for Login Service (1min 11s / 1min 54s) [ *** ] A start job is running for Login Service (1min 11s / 1min 54s) [ *** ] A start job is running for Login Service (1min 12s / 1min 54s) [ ***] A start job is running for Login Service (1min 12s / 1min 54s) [ **] A start job is running for Login Service (1min 13s / 1min 54s) [ *] A start job is running for Login Service (1min 14s / 1min 54s) [ **] A start job is running for Login Service (1min 14s / 1min 54s) [ ***] A start job is running for Login Service (1min 15s / 1min 54s) [ *** ] A start job is running for Login Service (1min 16s / 1min 54s) [ *** ] A start job is running for Login Service (1min 16s / 1min 54s) [*** ] A start job is running for Login Service (1min 17s / 1min 54s) [** ] A start job is running for Login Service (1min 17s / 1min 54s) [* ] A start job is running for Login Service (1min 18s / 1min 54s) [** ] A start job is running for Login Service (1min 18s / 1min 54s) [*** ] A start job is running for Login Service (1min 19s / 1min 54s) [ *** ] A start job is running for Login Service (1min 20s / 1min 54s) [ *** ] A start job is running for Login Service (1min 20s / 1min 54s) [ ***] A start job is running for Login Service (1min 21s / 1min 54s) [ **] A start job is running for Login Service (1min 21s / 1min 54s) [ *] A start job is running for Login Service (1min 22s / 1min 54s) [ **] A start job is running for Login Service (1min 23s / 1min 54s) [ ***] A start job is running for Login Service (1min 23s / 1min 54s) [ *** ] A start job is running for Login Service (1min 24s / 1min 54s) [ *** ] A start job is running for Login Service (1min 25s / 1min 54s) [*** ] A start job is running for Login Service (1min 25s / 1min 54s) [** ] A start job is running for Login Service (1min 26s / 1min 54s) [* ] A start job is running for Login Service (1min 26s / 1min 54s) [ OK ] Reached target sshd-keygen.target. [ OK ] Reached target Network. Starting OpenSSH server daemon... Starting libguestfs firstboot service... Starting Permit User Sessions... Starting Wait for Network to be Configured... firstboot.sh[151]: /usr/lib/virt-sysprep/firstboot.sh start [ OK ] Started Permit User Sessions. firstboot.sh[151]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. firstboot.sh[151]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-ghc-SHA-Sx9po8-ghc-SHA-boot-sh === [ OK ] Started Set the date and time. firstboot.sh[151]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[151]: + set -e firstboot.sh[151]: + exec Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.16.0-rc2-00328-gebea62367bc4 on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: [ OK ] Removed slice system-sshd\x2dkeygen.slice. [ OK ] Stopped target Timers. [ OK ] Stopped target Network is Online. [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... Stopping Serial Getty on ttyS0... [ OK ] Stopped Daily Cleanup of Temporary Directories. Stopping D-Bus System Message Bus... [ OK ] Stopped Wait for Network to be Configured. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped Login Service. [ OK ] Stopped target sshd-keygen.target. [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped libguestfs firstboot service. [ OK ] Stopped target Network. Stopping Network Service... [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped dnf makecache timer. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped Update is Completed. Stopping Load/Save Random Seed... [ OK ] Stopped Rebuild Hardware Database. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Rebuild Dynamic Linker Cache. [ OK ] Stopped Network Service. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting Temporary Directory (/tmp)... Unmounting /run/user/1000... [ OK ] Stopped Configure read-only root support. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Unmounted /run/user/1000. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Power-Off... systemd-shutdow: 15 output lines suppressed due to ratelimiting systemd-shutdown[1]: Syncing filesystems and block devices. systemd-shutdown[1]: Sending SIGTERM to remaining processes... systemd-journald[85]: Received SIGTERM from PID 1 (systemd-shutdow). systemd-shutdown[1]: Sending SIGKILL to remaining processes... systemd-shutdown[1]: Unmounting file systems. EXT4-fs (vda): re-mounted. Opts: data=ordered systemd-shutdown[1]: All filesystems unmounted. systemd-shutdown[1]: Deactivating swaps. systemd-shutdown[1]: All swaps deactivated. systemd-shutdown[1]: Detaching loop devices. systemd-shutdown[1]: All loop devices detached. systemd-shutdown[1]: Detaching DM devices. reboot: Power down Power off *stdin*:2: libguestfs: error: download: /build.log: No such file or directory *stdin*:3: libguestfs: error: download: /buildok: No such file or directory